11:44 a.m.
Hello Folks,
For my previous question to the mailing list, Arkady was able to figure out
the exact error message that was being generated in the logs. I am
forwarding my email conversation with Arkady so that all the information is
collected in the email.
Additionally I am attaching the undercloud logs collected using the
LogTools utility with run mode 8, if required.
Can anyone in this list, help me with identifying what is wrong with the
template and where can I locate this template to take a look into it?
Best Regards,
Ashish Kurian
---------- Forwarded message ---------
From: Arkady Shtempler <ashtempl(a)redhat.com>
Date: Mon, May 4, 2020 at 4:23 PM
Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
To: Ashish Kurian <ashishbnv(a)gmail.com>
Hi Ashish!
I was able to find these Errors (these are nor related to SSH problem that
you have, but indicates on some FATAL error in used templates) in
*builder-undercloud.log*
~~~~~~~~~~~~~~~~ /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
273/629
2059- Installing : kernel-3.10.0-1127.el7.x86_64
274/629
*2060:grubby fatal error: unable to find a suitable template2061:grubby
fatal error: unable to find a suitable template*
2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
275/629
2063- Updating : mdadm-4.1-4.el7.x86_64
276/629
2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
277/629
2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
278/629
2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
279/629
2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
280/629
2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
281/629
2421-No '/dev/log' or 'logger' included for syslog logging
2422-No '/dev/log' or 'logger' included for syslog logging
*2423:grubby fatal error: unable to find a suitable template2424:grubby
fatal error: unable to find a suitable template*
2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
1/629
2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
2/629
2427- Verifying : certmonger-0.78.4-12.el7.x86_64
3/629
2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
4/629
2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
5/629
2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
6/629
2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
7/629
1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
3/629
1781- Updating : setup-2.8.71-11.el7.noarch
4/629newaliases: warning: valid_hostname: invalid character
40(decimal)...<--LogTool-LINE IS TOO LONG!
*1782:newaliases: fatal: unable to use my own hostname*
1783-
1784-warning: /etc/shadow created as /etc/shadow.rpmnew
1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
5/629
1786- Updating : subscription-manager-rhsm-certificates-1.24.26-1.el7.c
6/629
1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
7/629
1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
8/629
1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
9/629
BTW - maybe you can try to run LogTool
<https://github.com/zahlabut/LogTool> you
need to run mode number 8, I mean:
8) - Export ERRORs/WARNINGs from Undercloud logs
Actually it's very simple to use this tool, you just have to clone it to
your Undercloud host and to start PyTool.py
Thanks!
On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
Hello Arkady,
Please find the two set of log files.
Just to make your analysis easier, the quickstart is failing at the
playbook :
TASK [Gathering Facts]
********************************************************************************************************************************************************************************
task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
Best Regards,
Ashish Kurian
On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
wrote:
> Hi!
>
> I'm not sure that you'll be able to get them all in one zip file that
> won't exceed max email attachment size.
> Let's start with log files that you have under /home/stack and /var/log
>
> Thanks!
>
>
>
> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
>
>> Hello Arkady,
>>
>> Do you need all of them? How should I provide them to you? Over email or
>> something else?
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler <ashtempl(a)redhat.com>
>> wrote:
>>
>>> Hi Ashish!
>>>
>>> On your Undercloud host you have a bunch of logs under:
>>> ['/var/log', '/home/stack', '/usr/share/',
'/var/lib/']'
>>>
>>> Thanks!
>>>
>>>
>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>> wrote:
>>>
>>>> Hello Arkady,
>>>>
>>>> I appreciate your help. Ofcourse I can provide you the required log
>>>> files. However, can you let me know what log file are you looking for
and
>>>> where they are located?
>>>>
>>>> Best Regards,
>>>> Ashish Kurian
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Ashish!
>>>>>
>>>>> Is that possible to get the access to your log files?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Folks,
>>>>>>
>>>>>> For my TripleO installation, I am constantly getting failure to
>>>>>> reach the undercloud with the message:
>>>>>>
>>>>>> MSG:
>>>>>>
>>>>>> Data could not be sent to remote host "undercloud".
Make sure this
>>>>>> host can be reached over ssh: Warning: Permanently added
'undercloud'
>>>>>> (ECDSA) to the list of known hosts.
>>>>>> System is booting up. See pam_nologin(8)
>>>>>> Authentication failed.
>>>>>>
>>>>>> When I actually try to manually ssh into the undercloud using
the
>>>>>> actual commands, I am able to login into the undercloud.
>>>>>>
>>>>>> Can someone help me what might be the problem?
>>>>>>
>>>>>> Best Regards,
>>>>>> Ashish Kurian
>>>>>> _______________________________________________
>>>>>> users mailing list
>>>>>> users(a)lists.rdoproject.org
>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>
>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>
>>>>>
1:38 p.m.
New subject: [TripleO] Undercloud unreachable
Helllo Folks,
I am still waiting for some assistance from this group. Really cannot
proceed without that.
Best Regards,
Ashish Kurian
On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
Hello Folks,
For my previous question to the mailing list, Arkady was able to figure
out the exact error message that was being generated in the logs. I am
forwarding my email conversation with Arkady so that all the information is
collected in the email.
Additionally I am attaching the undercloud logs collected using the
LogTools utility with run mode 8, if required.
Can anyone in this list, help me with identifying what is wrong with the
template and where can I locate this template to take a look into it?
Best Regards,
Ashish Kurian
---------- Forwarded message ---------
From: Arkady Shtempler <ashtempl(a)redhat.com>
Date: Mon, May 4, 2020 at 4:23 PM
Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
To: Ashish Kurian <ashishbnv(a)gmail.com>
Hi Ashish!
I was able to find these Errors (these are nor related to SSH problem that
you have, but indicates on some FATAL error in used templates) in
*builder-undercloud.log*
~~~~~~~~~~~~~~~~ /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
273/629
2059- Installing : kernel-3.10.0-1127.el7.x86_64
274/629
*2060:grubby fatal error: unable to find a suitable template2061:grubby
fatal error: unable to find a suitable template*
2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
275/629
2063- Updating : mdadm-4.1-4.el7.x86_64
276/629
2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
277/629
2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
278/629
2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
279/629
2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
280/629
2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
281/629
2421-No '/dev/log' or 'logger' included for syslog logging
2422-No '/dev/log' or 'logger' included for syslog logging
*2423:grubby fatal error: unable to find a suitable template2424:grubby
fatal error: unable to find a suitable template*
2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
1/629
2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
2/629
2427- Verifying : certmonger-0.78.4-12.el7.x86_64
3/629
2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
4/629
2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
5/629
2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
6/629
2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
7/629
1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
3/629
1781- Updating : setup-2.8.71-11.el7.noarch
4/629newaliases: warning: valid_hostname: invalid character
40(decimal)...<--LogTool-LINE IS TOO LONG!
*1782:newaliases: fatal: unable to use my own hostname*
1783-
1784-warning: /etc/shadow created as /etc/shadow.rpmnew
1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
5/629
1786- Updating : subscription-manager-rhsm-certificates-1.24.26-1.el7.c
6/629
1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
7/629
1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
8/629
1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
9/629
BTW - maybe you can try to run LogTool
<https://github.com/zahlabut/LogTool> you need to run mode number 8, I
mean:
8) - Export ERRORs/WARNINGs from Undercloud logs
Actually it's very simple to use this tool, you just have to clone it to
your Undercloud host and to start PyTool.py
Thanks!
On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
> Hello Arkady,
>
> Please find the two set of log files.
>
> Just to make your analysis easier, the quickstart is failing at the
> playbook :
>
> TASK [Gathering Facts]
>
********************************************************************************************************************************************************************************
> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>
> Best Regards,
> Ashish Kurian
>
>
> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
> wrote:
>
>> Hi!
>>
>> I'm not sure that you'll be able to get them all in one zip file that
>> won't exceed max email attachment size.
>> Let's start with log files that you have under /home/stack and /var/log
>>
>> Thanks!
>>
>>
>>
>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com>
>> wrote:
>>
>>> Hello Arkady,
>>>
>>> Do you need all of them? How should I provide them to you? Over email
>>> or something else?
>>>
>>> Best Regards,
>>> Ashish Kurian
>>>
>>>
>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler <ashtempl(a)redhat.com>
>>> wrote:
>>>
>>>> Hi Ashish!
>>>>
>>>> On your Undercloud host you have a bunch of logs under:
>>>> ['/var/log', '/home/stack', '/usr/share/',
'/var/lib/']'
>>>>
>>>> Thanks!
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Arkady,
>>>>>
>>>>> I appreciate your help. Ofcourse I can provide you the required log
>>>>> files. However, can you let me know what log file are you looking for
and
>>>>> where they are located?
>>>>>
>>>>> Best Regards,
>>>>> Ashish Kurian
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Ashish!
>>>>>>
>>>>>> Is that possible to get the access to your log files?
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Folks,
>>>>>>>
>>>>>>> For my TripleO installation, I am constantly getting failure
to
>>>>>>> reach the undercloud with the message:
>>>>>>>
>>>>>>> MSG:
>>>>>>>
>>>>>>> Data could not be sent to remote host "undercloud".
Make sure this
>>>>>>> host can be reached over ssh: Warning: Permanently added
'undercloud'
>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>> Authentication failed.
>>>>>>>
>>>>>>> When I actually try to manually ssh into the undercloud using
the
>>>>>>> actual commands, I am able to login into the undercloud.
>>>>>>>
>>>>>>> Can someone help me what might be the problem?
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Ashish Kurian
>>>>>>> _______________________________________________
>>>>>>> users mailing list
>>>>>>> users(a)lists.rdoproject.org
>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>
>>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>>
>>>>>>
3:34 p.m.
New subject: [TripleO] Undercloud unreachable
those errors you have highlighted are not an errors related to ssh... i
believe.
reinstall your undercloud.
install undercloud again.
paste all commands you executed and final error lines, please.
i remember had same issue, reinstall helped me. it possibly I messed
something up.
On Sat, 9 May 2020, 21:38 Ashish Kurian, <ashishbnv(a)gmail.com> wrote:
Helllo Folks,
I am still waiting for some assistance from this group. Really cannot
proceed without that.
Best Regards,
Ashish Kurian
On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
> Hello Folks,
>
> For my previous question to the mailing list, Arkady was able to figure
> out the exact error message that was being generated in the logs. I am
> forwarding my email conversation with Arkady so that all the information is
> collected in the email.
>
> Additionally I am attaching the undercloud logs collected using the
> LogTools utility with run mode 8, if required.
>
> Can anyone in this list, help me with identifying what is wrong with the
> template and where can I locate this template to take a look into it?
>
> Best Regards,
> Ashish Kurian
>
>
> ---------- Forwarded message ---------
> From: Arkady Shtempler <ashtempl(a)redhat.com>
> Date: Mon, May 4, 2020 at 4:23 PM
> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
> To: Ashish Kurian <ashishbnv(a)gmail.com>
>
>
> Hi Ashish!
>
> I was able to find these Errors (these are nor related to SSH problem
> that you have, but indicates on some FATAL error in used templates) in
> *builder-undercloud.log*
>
> ~~~~~~~~~~~~~~~~
> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
> 273/629
> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
> 274/629
>
> *2060:grubby fatal error: unable to find a suitable template2061:grubby
> fatal error: unable to find a suitable template*
> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
> 275/629
> 2063- Updating : mdadm-4.1-4.el7.x86_64
> 276/629
> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
> 277/629
> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
> 278/629
> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
> 279/629
> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
> 280/629
> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
> 281/629
>
>
>
> 2421-No '/dev/log' or 'logger' included for syslog logging
> 2422-No '/dev/log' or 'logger' included for syslog logging
>
> *2423:grubby fatal error: unable to find a suitable template2424:grubby
> fatal error: unable to find a suitable template*
> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
> 1/629
> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
> 2/629
> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
> 3/629
> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
> 4/629
> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
> 5/629
> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
> 6/629
> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
> 7/629
>
>
>
> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
> 3/629
> 1781- Updating : setup-2.8.71-11.el7.noarch
> 4/629newaliases: warning: valid_hostname: invalid character
> 40(decimal)...<--LogTool-LINE IS TOO LONG!
> *1782:newaliases: fatal: unable to use my own hostname*
> 1783-
> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
> 5/629
> 1786- Updating :
> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
> 7/629
> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
> 8/629
> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
> 9/629
>
> BTW - maybe you can try to run LogTool
> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
> mean:
> 8) - Export ERRORs/WARNINGs from Undercloud logs
> Actually it's very simple to use this tool, you just have to clone it to
> your Undercloud host and to start PyTool.py
>
> Thanks!
>
> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
>
>> Hello Arkady,
>>
>> Please find the two set of log files.
>>
>> Just to make your analysis easier, the quickstart is failing at the
>> playbook :
>>
>> TASK [Gathering Facts]
>>
********************************************************************************************************************************************************************************
>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
>> wrote:
>>
>>> Hi!
>>>
>>> I'm not sure that you'll be able to get them all in one zip file
that
>>> won't exceed max email attachment size.
>>> Let's start with log files that you have under /home/stack and /var/log
>>>
>>> Thanks!
>>>
>>>
>>>
>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>> wrote:
>>>
>>>> Hello Arkady,
>>>>
>>>> Do you need all of them? How should I provide them to you? Over email
>>>> or something else?
>>>>
>>>> Best Regards,
>>>> Ashish Kurian
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Ashish!
>>>>>
>>>>> On your Undercloud host you have a bunch of logs under:
>>>>> ['/var/log', '/home/stack', '/usr/share/',
'/var/lib/']'
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Arkady,
>>>>>>
>>>>>> I appreciate your help. Ofcourse I can provide you the required
log
>>>>>> files. However, can you let me know what log file are you looking
for and
>>>>>> where they are located?
>>>>>>
>>>>>> Best Regards,
>>>>>> Ashish Kurian
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Ashish!
>>>>>>>
>>>>>>> Is that possible to get the access to your log files?
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Folks,
>>>>>>>>
>>>>>>>> For my TripleO installation, I am constantly getting
failure to
>>>>>>>> reach the undercloud with the message:
>>>>>>>>
>>>>>>>> MSG:
>>>>>>>>
>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure this
>>>>>>>> host can be reached over ssh: Warning: Permanently added
'undercloud'
>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>> Authentication failed.
>>>>>>>>
>>>>>>>> When I actually try to manually ssh into the undercloud
using the
>>>>>>>> actual commands, I am able to login into the undercloud.
>>>>>>>>
>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Ashish Kurian
>>>>>>>> _______________________________________________
>>>>>>>> users mailing list
>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>
>>>>>>> _______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
1:34 a.m.
New subject: [TripleO] Undercloud unreachable
Hello Folks,
If the installation failed in between, can I do a retry or do some cleaning
up before the retry or completely reinstall Centos and start again?
Best Regards,
Ashish Kurian
On Sat, May 9, 2020 at 10:34 PM Ruslanas Gžibovskis <ruslanas(a)lpic.lt>
wrote:
those errors you have highlighted are not an errors related to ssh...
i
believe.
reinstall your undercloud.
install undercloud again.
paste all commands you executed and final error lines, please.
i remember had same issue, reinstall helped me. it possibly I messed
something up.
On Sat, 9 May 2020, 21:38 Ashish Kurian, <ashishbnv(a)gmail.com> wrote:
>
> Helllo Folks,
>
> I am still waiting for some assistance from this group. Really cannot
> proceed without that.
>
> Best Regards,
> Ashish Kurian
>
>
> On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
>
>> Hello Folks,
>>
>> For my previous question to the mailing list, Arkady was able to figure
>> out the exact error message that was being generated in the logs. I am
>> forwarding my email conversation with Arkady so that all the information is
>> collected in the email.
>>
>> Additionally I am attaching the undercloud logs collected using the
>> LogTools utility with run mode 8, if required.
>>
>> Can anyone in this list, help me with identifying what is wrong with the
>> template and where can I locate this template to take a look into it?
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> ---------- Forwarded message ---------
>> From: Arkady Shtempler <ashtempl(a)redhat.com>
>> Date: Mon, May 4, 2020 at 4:23 PM
>> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
>> To: Ashish Kurian <ashishbnv(a)gmail.com>
>>
>>
>> Hi Ashish!
>>
>> I was able to find these Errors (these are nor related to SSH problem
>> that you have, but indicates on some FATAL error in used templates) in
>> *builder-undercloud.log*
>>
>> ~~~~~~~~~~~~~~~~
>> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
>> 273/629
>> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
>> 274/629
>>
>> *2060:grubby fatal error: unable to find a suitable template2061:grubby
>> fatal error: unable to find a suitable template*
>> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
>> 275/629
>> 2063- Updating : mdadm-4.1-4.el7.x86_64
>> 276/629
>> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
>> 277/629
>> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
>> 278/629
>> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
>> 279/629
>> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
>> 280/629
>> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
>> 281/629
>>
>>
>>
>> 2421-No '/dev/log' or 'logger' included for syslog logging
>> 2422-No '/dev/log' or 'logger' included for syslog logging
>>
>> *2423:grubby fatal error: unable to find a suitable template2424:grubby
>> fatal error: unable to find a suitable template*
>> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
>> 1/629
>> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
>> 2/629
>> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
>> 3/629
>> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
>> 4/629
>> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
>> 5/629
>> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
>> 6/629
>> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
>> 7/629
>>
>>
>>
>> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
>> 3/629
>> 1781- Updating : setup-2.8.71-11.el7.noarch
>> 4/629newaliases: warning: valid_hostname: invalid character
>> 40(decimal)...<--LogTool-LINE IS TOO LONG!
>> *1782:newaliases: fatal: unable to use my own hostname*
>> 1783-
>> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
>> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
>> 5/629
>> 1786- Updating :
>> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
>> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
>> 7/629
>> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
>> 8/629
>> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
>> 9/629
>>
>> BTW - maybe you can try to run LogTool
>> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
>> mean:
>> 8) - Export ERRORs/WARNINGs from Undercloud logs
>> Actually it's very simple to use this tool, you just have to clone it to
>> your Undercloud host and to start PyTool.py
>>
>> Thanks!
>>
>> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com>
>> wrote:
>>
>>> Hello Arkady,
>>>
>>> Please find the two set of log files.
>>>
>>> Just to make your analysis easier, the quickstart is failing at the
>>> playbook :
>>>
>>> TASK [Gathering Facts]
>>>
********************************************************************************************************************************************************************************
>>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>>
>>> Best Regards,
>>> Ashish Kurian
>>>
>>>
>>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
>>> wrote:
>>>
>>>> Hi!
>>>>
>>>> I'm not sure that you'll be able to get them all in one zip file
that
>>>> won't exceed max email attachment size.
>>>> Let's start with log files that you have under /home/stack and
/var/log
>>>>
>>>> Thanks!
>>>>
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Arkady,
>>>>>
>>>>> Do you need all of them? How should I provide them to you? Over
email
>>>>> or something else?
>>>>>
>>>>> Best Regards,
>>>>> Ashish Kurian
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Ashish!
>>>>>>
>>>>>> On your Undercloud host you have a bunch of logs under:
>>>>>> ['/var/log', '/home/stack',
'/usr/share/', '/var/lib/']'
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Arkady,
>>>>>>>
>>>>>>> I appreciate your help. Ofcourse I can provide you the
required log
>>>>>>> files. However, can you let me know what log file are you
looking for and
>>>>>>> where they are located?
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Ashish Kurian
>>>>>>>
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler <
>>>>>>> ashtempl(a)redhat.com> wrote:
>>>>>>>
>>>>>>>> Hi Ashish!
>>>>>>>>
>>>>>>>> Is that possible to get the access to your log files?
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hello Folks,
>>>>>>>>>
>>>>>>>>> For my TripleO installation, I am constantly getting
failure to
>>>>>>>>> reach the undercloud with the message:
>>>>>>>>>
>>>>>>>>> MSG:
>>>>>>>>>
>>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure
>>>>>>>>> this host can be reached over ssh: Warning:
Permanently added 'undercloud'
>>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>>> Authentication failed.
>>>>>>>>>
>>>>>>>>> When I actually try to manually ssh into the
undercloud using the
>>>>>>>>> actual commands, I am able to login into the
undercloud.
>>>>>>>>>
>>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>>
>>>>>>>>> Best Regards,
>>>>>>>>> Ashish Kurian
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>> To unsubscribe:
users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>>
>>>>>>>> _______________________________________________
> users mailing list
> users(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/users
>
> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>
2:44 a.m.
New subject: [TripleO] Undercloud unreachable
Hi Ashish,
On Sun, May 10, 2020 at 12:08 AM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
Helllo Folks,
I am still waiting for some assistance from this group. Really cannot
proceed without that.
Can u share more details wrt to your environment like which release you are
trying to deploy, you deploying on a baremetal or a vm, what's the
configuration of baremetal/vm, how you trying to deploy, etc so people on
list have more context.
Recently there was a bug wrt slow overcloud nodes
https://bugs.launchpad.net/tripleo/+bug/1873892 which is fixed in Train.
In your case it's undercloud ssh failing, and i believe it's also due to
slow nodes(as you said you are able to SSH to undercloud manually). I
assume you are using tripleo-quickstart to deploy, if yes you can try
similar retry/pause in quickstart to see if it helps.
Also you can join freenode channel #tripleo, #oooq to have quicker feedback.
Best Regards,
Ashish Kurian
On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
> Hello Folks,
>
> For my previous question to the mailing list, Arkady was able to figure
> out the exact error message that was being generated in the logs. I am
> forwarding my email conversation with Arkady so that all the information is
> collected in the email.
>
> Additionally I am attaching the undercloud logs collected using the
> LogTools utility with run mode 8, if required.
>
> Can anyone in this list, help me with identifying what is wrong with the
> template and where can I locate this template to take a look into it?
>
> Best Regards,
> Ashish Kurian
>
>
> ---------- Forwarded message ---------
> From: Arkady Shtempler <ashtempl(a)redhat.com>
> Date: Mon, May 4, 2020 at 4:23 PM
> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
> To: Ashish Kurian <ashishbnv(a)gmail.com>
>
>
> Hi Ashish!
>
> I was able to find these Errors (these are nor related to SSH problem
> that you have, but indicates on some FATAL error in used templates) in
> *builder-undercloud.log*
>
> ~~~~~~~~~~~~~~~~
> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
> 273/629
> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
> 274/629
>
> *2060:grubby fatal error: unable to find a suitable template2061:grubby
> fatal error: unable to find a suitable template*
> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
> 275/629
> 2063- Updating : mdadm-4.1-4.el7.x86_64
> 276/629
> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
> 277/629
> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
> 278/629
> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
> 279/629
> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
> 280/629
> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
> 281/629
>
>
>
> 2421-No '/dev/log' or 'logger' included for syslog logging
> 2422-No '/dev/log' or 'logger' included for syslog logging
>
> *2423:grubby fatal error: unable to find a suitable template2424:grubby
> fatal error: unable to find a suitable template*
> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
> 1/629
> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
> 2/629
> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
> 3/629
> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
> 4/629
> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
> 5/629
> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
> 6/629
> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
> 7/629
>
>
>
> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
> 3/629
> 1781- Updating : setup-2.8.71-11.el7.noarch
> 4/629newaliases: warning: valid_hostname: invalid character
> 40(decimal)...<--LogTool-LINE IS TOO LONG!
> *1782:newaliases: fatal: unable to use my own hostname*
> 1783-
> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
> 5/629
> 1786- Updating :
> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
> 7/629
> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
> 8/629
> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
> 9/629
>
> BTW - maybe you can try to run LogTool
> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
> mean:
> 8) - Export ERRORs/WARNINGs from Undercloud logs
> Actually it's very simple to use this tool, you just have to clone it to
> your Undercloud host and to start PyTool.py
>
> Thanks!
>
> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
>
>> Hello Arkady,
>>
>> Please find the two set of log files.
>>
>> Just to make your analysis easier, the quickstart is failing at the
>> playbook :
>>
>> TASK [Gathering Facts]
>>
********************************************************************************************************************************************************************************
>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
>> wrote:
>>
>>> Hi!
>>>
>>> I'm not sure that you'll be able to get them all in one zip file
that
>>> won't exceed max email attachment size.
>>> Let's start with log files that you have under /home/stack and /var/log
>>>
>>> Thanks!
>>>
>>>
>>>
>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>> wrote:
>>>
>>>> Hello Arkady,
>>>>
>>>> Do you need all of them? How should I provide them to you? Over email
>>>> or something else?
>>>>
>>>> Best Regards,
>>>> Ashish Kurian
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Ashish!
>>>>>
>>>>> On your Undercloud host you have a bunch of logs under:
>>>>> ['/var/log', '/home/stack', '/usr/share/',
'/var/lib/']'
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Arkady,
>>>>>>
>>>>>> I appreciate your help. Ofcourse I can provide you the required
log
>>>>>> files. However, can you let me know what log file are you looking
for and
>>>>>> where they are located?
>>>>>>
>>>>>> Best Regards,
>>>>>> Ashish Kurian
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Ashish!
>>>>>>>
>>>>>>> Is that possible to get the access to your log files?
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Folks,
>>>>>>>>
>>>>>>>> For my TripleO installation, I am constantly getting
failure to
>>>>>>>> reach the undercloud with the message:
>>>>>>>>
>>>>>>>> MSG:
>>>>>>>>
>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure this
>>>>>>>> host can be reached over ssh: Warning: Permanently added
'undercloud'
>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>> Authentication failed.
>>>>>>>>
>>>>>>>> When I actually try to manually ssh into the undercloud
using the
>>>>>>>> actual commands, I am able to login into the undercloud.
>>>>>>>>
>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Ashish Kurian
>>>>>>>> _______________________________________________
>>>>>>>> users mailing list
>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>
>>>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>
>>>>>>> _______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
--
Yatin Karel
1:09 a.m.
New subject: [TripleO] Undercloud unreachable
Hello Yatin,
I am deploying on a baremetal. The configuration is Centos 7. 16GB Ram. I
hope this much of information about my machine configuration is sufficient.
Let me know if you need more details like the kernel version or anything
else.
Following your suggestion, I tried with the Train release and the
undercloud succeeded and the process went much further. However, the
process failed (remained stuck) at deploying overcloud phase.
Do you think this could be due to insufficient amount of memory? I have
ordered for another 16GB of RAM and it will arrive today.
Also, what is the correct procedure to rerun the deployment rather than
starting from the scratch with a new Centos installation?
Best Regards,
Ashish Kurian
On Mon, May 11, 2020 at 9:44 AM YATIN KAREL <yatinkarel(a)gmail.com> wrote:
Hi Ashish,
On Sun, May 10, 2020 at 12:08 AM Ashish Kurian <ashishbnv(a)gmail.com>
wrote:
>
> Helllo Folks,
>
> I am still waiting for some assistance from this group. Really cannot
> proceed without that.
>
Can u share more details wrt to your environment like which release you
are trying to deploy, you deploying on a baremetal or a vm, what's the
configuration of baremetal/vm, how you trying to deploy, etc so people on
list have more context.
Recently there was a bug wrt slow overcloud nodes
https://bugs.launchpad.net/tripleo/+bug/1873892 which is fixed in Train.
In your case it's undercloud ssh failing, and i believe it's also due to
slow nodes(as you said you are able to SSH to undercloud manually). I
assume you are using tripleo-quickstart to deploy, if yes you can try
similar retry/pause in quickstart to see if it helps.
Also you can join freenode channel #tripleo, #oooq to have quicker
feedback.
>
> Best Regards,
> Ashish Kurian
>
>
> On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
>
>> Hello Folks,
>>
>> For my previous question to the mailing list, Arkady was able to figure
>> out the exact error message that was being generated in the logs. I am
>> forwarding my email conversation with Arkady so that all the information is
>> collected in the email.
>>
>> Additionally I am attaching the undercloud logs collected using the
>> LogTools utility with run mode 8, if required.
>>
>> Can anyone in this list, help me with identifying what is wrong with the
>> template and where can I locate this template to take a look into it?
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> ---------- Forwarded message ---------
>> From: Arkady Shtempler <ashtempl(a)redhat.com>
>> Date: Mon, May 4, 2020 at 4:23 PM
>> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
>> To: Ashish Kurian <ashishbnv(a)gmail.com>
>>
>>
>> Hi Ashish!
>>
>> I was able to find these Errors (these are nor related to SSH problem
>> that you have, but indicates on some FATAL error in used templates) in
>> *builder-undercloud.log*
>>
>> ~~~~~~~~~~~~~~~~
>> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
>> 273/629
>> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
>> 274/629
>>
>> *2060:grubby fatal error: unable to find a suitable template2061:grubby
>> fatal error: unable to find a suitable template*
>> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
>> 275/629
>> 2063- Updating : mdadm-4.1-4.el7.x86_64
>> 276/629
>> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
>> 277/629
>> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
>> 278/629
>> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
>> 279/629
>> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
>> 280/629
>> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
>> 281/629
>>
>>
>>
>> 2421-No '/dev/log' or 'logger' included for syslog logging
>> 2422-No '/dev/log' or 'logger' included for syslog logging
>>
>> *2423:grubby fatal error: unable to find a suitable template2424:grubby
>> fatal error: unable to find a suitable template*
>> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
>> 1/629
>> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
>> 2/629
>> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
>> 3/629
>> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
>> 4/629
>> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
>> 5/629
>> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
>> 6/629
>> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
>> 7/629
>>
>>
>>
>> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
>> 3/629
>> 1781- Updating : setup-2.8.71-11.el7.noarch
>> 4/629newaliases: warning: valid_hostname: invalid character
>> 40(decimal)...<--LogTool-LINE IS TOO LONG!
>> *1782:newaliases: fatal: unable to use my own hostname*
>> 1783-
>> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
>> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
>> 5/629
>> 1786- Updating :
>> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
>> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
>> 7/629
>> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
>> 8/629
>> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
>> 9/629
>>
>> BTW - maybe you can try to run LogTool
>> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
>> mean:
>> 8) - Export ERRORs/WARNINGs from Undercloud logs
>> Actually it's very simple to use this tool, you just have to clone it to
>> your Undercloud host and to start PyTool.py
>>
>> Thanks!
>>
>> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com>
>> wrote:
>>
>>> Hello Arkady,
>>>
>>> Please find the two set of log files.
>>>
>>> Just to make your analysis easier, the quickstart is failing at the
>>> playbook :
>>>
>>> TASK [Gathering Facts]
>>>
********************************************************************************************************************************************************************************
>>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>>
>>> Best Regards,
>>> Ashish Kurian
>>>
>>>
>>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler <ashtempl(a)redhat.com>
>>> wrote:
>>>
>>>> Hi!
>>>>
>>>> I'm not sure that you'll be able to get them all in one zip file
that
>>>> won't exceed max email attachment size.
>>>> Let's start with log files that you have under /home/stack and
/var/log
>>>>
>>>> Thanks!
>>>>
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hello Arkady,
>>>>>
>>>>> Do you need all of them? How should I provide them to you? Over
email
>>>>> or something else?
>>>>>
>>>>> Best Regards,
>>>>> Ashish Kurian
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Ashish!
>>>>>>
>>>>>> On your Undercloud host you have a bunch of logs under:
>>>>>> ['/var/log', '/home/stack',
'/usr/share/', '/var/lib/']'
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Arkady,
>>>>>>>
>>>>>>> I appreciate your help. Ofcourse I can provide you the
required log
>>>>>>> files. However, can you let me know what log file are you
looking for and
>>>>>>> where they are located?
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Ashish Kurian
>>>>>>>
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler <
>>>>>>> ashtempl(a)redhat.com> wrote:
>>>>>>>
>>>>>>>> Hi Ashish!
>>>>>>>>
>>>>>>>> Is that possible to get the access to your log files?
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hello Folks,
>>>>>>>>>
>>>>>>>>> For my TripleO installation, I am constantly getting
failure to
>>>>>>>>> reach the undercloud with the message:
>>>>>>>>>
>>>>>>>>> MSG:
>>>>>>>>>
>>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure
>>>>>>>>> this host can be reached over ssh: Warning:
Permanently added 'undercloud'
>>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>>> Authentication failed.
>>>>>>>>>
>>>>>>>>> When I actually try to manually ssh into the
undercloud using the
>>>>>>>>> actual commands, I am able to login into the
undercloud.
>>>>>>>>>
>>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>>
>>>>>>>>> Best Regards,
>>>>>>>>> Ashish Kurian
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>> To unsubscribe:
users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>>
>>>>>>>> _______________________________________________
> users mailing list
> users(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/users
>
> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>
--
Yatin Karel
2:20 a.m.
New subject: [TripleO] Undercloud unreachable
Hi Ashish,
just my experiences... 16GB is not *really* enough, although if you
allocate 16GB swap it *should* install. As you're running on bare metal, if
it really complains, rather than chase it - just do a re-install. That way
you, and everyone else, knows you have a 'clean' installation. But, if the
extra RAM is due today, get the RAM in and do a re-install with 32GB swap.
The system will thank you for it by not being in the land of the "weird
errors".
Hope that helps,
Phill.
On Tue, 12 May 2020 at 07:09, Ashish Kurian <ashishbnv(a)gmail.com> wrote:
Hello Yatin,
I am deploying on a baremetal. The configuration is Centos 7. 16GB Ram. I
hope this much of information about my machine configuration is sufficient.
Let me know if you need more details like the kernel version or anything
else.
Following your suggestion, I tried with the Train release and the
undercloud succeeded and the process went much further. However, the
process failed (remained stuck) at deploying overcloud phase.
Do you think this could be due to insufficient amount of memory? I have
ordered for another 16GB of RAM and it will arrive today.
Also, what is the correct procedure to rerun the deployment rather than
starting from the scratch with a new Centos installation?
Best Regards,
Ashish Kurian
On Mon, May 11, 2020 at 9:44 AM YATIN KAREL <yatinkarel(a)gmail.com> wrote:
> Hi Ashish,
>
> On Sun, May 10, 2020 at 12:08 AM Ashish Kurian <ashishbnv(a)gmail.com>
> wrote:
>
>>
>> Helllo Folks,
>>
>> I am still waiting for some assistance from this group. Really cannot
>> proceed without that.
>>
> Can u share more details wrt to your environment like which release you
> are trying to deploy, you deploying on a baremetal or a vm, what's the
> configuration of baremetal/vm, how you trying to deploy, etc so people on
> list have more context.
> Recently there was a bug wrt slow overcloud nodes
> https://bugs.launchpad.net/tripleo/+bug/1873892 which is fixed in Train.
>
> In your case it's undercloud ssh failing, and i believe it's also due to
> slow nodes(as you said you are able to SSH to undercloud manually). I
> assume you are using tripleo-quickstart to deploy, if yes you can try
> similar retry/pause in quickstart to see if it helps.
>
> Also you can join freenode channel #tripleo, #oooq to have quicker
> feedback.
>
>
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com>
>> wrote:
>>
>>> Hello Folks,
>>>
>>> For my previous question to the mailing list, Arkady was able to figure
>>> out the exact error message that was being generated in the logs. I am
>>> forwarding my email conversation with Arkady so that all the information is
>>> collected in the email.
>>>
>>> Additionally I am attaching the undercloud logs collected using the
>>> LogTools utility with run mode 8, if required.
>>>
>>> Can anyone in this list, help me with identifying what is wrong with
>>> the template and where can I locate this template to take a look into it?
>>>
>>> Best Regards,
>>> Ashish Kurian
>>>
>>>
>>> ---------- Forwarded message ---------
>>> From: Arkady Shtempler <ashtempl(a)redhat.com>
>>> Date: Mon, May 4, 2020 at 4:23 PM
>>> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
>>> To: Ashish Kurian <ashishbnv(a)gmail.com>
>>>
>>>
>>> Hi Ashish!
>>>
>>> I was able to find these Errors (these are nor related to SSH problem
>>> that you have, but indicates on some FATAL error in used templates) in
>>> *builder-undercloud.log*
>>>
>>> ~~~~~~~~~~~~~~~~
>>> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
>>> 273/629
>>> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
>>> 274/629
>>>
>>> *2060:grubby fatal error: unable to find a suitable template2061:grubby
>>> fatal error: unable to find a suitable template*
>>> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
>>> 275/629
>>> 2063- Updating : mdadm-4.1-4.el7.x86_64
>>> 276/629
>>> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
>>> 277/629
>>> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
>>> 278/629
>>> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
>>> 279/629
>>> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
>>> 280/629
>>> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
>>> 281/629
>>>
>>>
>>>
>>> 2421-No '/dev/log' or 'logger' included for syslog logging
>>> 2422-No '/dev/log' or 'logger' included for syslog logging
>>>
>>> *2423:grubby fatal error: unable to find a suitable template2424:grubby
>>> fatal error: unable to find a suitable template*
>>> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
>>> 1/629
>>> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
>>> 2/629
>>> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
>>> 3/629
>>> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
>>> 4/629
>>> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
>>> 5/629
>>> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
>>> 6/629
>>> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
>>> 7/629
>>>
>>>
>>>
>>> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
>>> 3/629
>>> 1781- Updating : setup-2.8.71-11.el7.noarch
>>> 4/629newaliases: warning: valid_hostname: invalid character
>>> 40(decimal)...<--LogTool-LINE IS TOO LONG!
>>> *1782:newaliases: fatal: unable to use my own hostname*
>>> 1783-
>>> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
>>> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
>>> 5/629
>>> 1786- Updating :
>>> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
>>> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
>>> 7/629
>>> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
>>> 8/629
>>> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
>>> 9/629
>>>
>>> BTW - maybe you can try to run LogTool
>>> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
>>> mean:
>>> 8) - Export ERRORs/WARNINGs from Undercloud logs
>>> Actually it's very simple to use this tool, you just have to clone it
>>> to your Undercloud host and to start PyTool.py
>>>
>>> Thanks!
>>>
>>> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>> wrote:
>>>
>>>> Hello Arkady,
>>>>
>>>> Please find the two set of log files.
>>>>
>>>> Just to make your analysis easier, the quickstart is failing at the
>>>> playbook :
>>>>
>>>> TASK [Gathering Facts]
>>>>
********************************************************************************************************************************************************************************
>>>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>>>
>>>> Best Regards,
>>>> Ashish Kurian
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi!
>>>>>
>>>>> I'm not sure that you'll be able to get them all in one zip
file that
>>>>> won't exceed max email attachment size.
>>>>> Let's start with log files that you have under /home/stack and
>>>>> /var/log
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Arkady,
>>>>>>
>>>>>> Do you need all of them? How should I provide them to you? Over
>>>>>> email or something else?
>>>>>>
>>>>>> Best Regards,
>>>>>> Ashish Kurian
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Ashish!
>>>>>>>
>>>>>>> On your Undercloud host you have a bunch of logs under:
>>>>>>> ['/var/log', '/home/stack',
'/usr/share/', '/var/lib/']'
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Arkady,
>>>>>>>>
>>>>>>>> I appreciate your help. Ofcourse I can provide you the
required
>>>>>>>> log files. However, can you let me know what log file are
you looking for
>>>>>>>> and where they are located?
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Ashish Kurian
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler <
>>>>>>>> ashtempl(a)redhat.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Ashish!
>>>>>>>>>
>>>>>>>>> Is that possible to get the access to your log
files?
>>>>>>>>>
>>>>>>>>> Thanks!
>>>>>>>>>
>>>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hello Folks,
>>>>>>>>>>
>>>>>>>>>> For my TripleO installation, I am constantly
getting failure to
>>>>>>>>>> reach the undercloud with the message:
>>>>>>>>>>
>>>>>>>>>> MSG:
>>>>>>>>>>
>>>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure
>>>>>>>>>> this host can be reached over ssh: Warning:
Permanently added 'undercloud'
>>>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>>>> Authentication failed.
>>>>>>>>>>
>>>>>>>>>> When I actually try to manually ssh into the
undercloud using
>>>>>>>>>> the actual commands, I am able to login into the
undercloud.
>>>>>>>>>>
>>>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>>>
>>>>>>>>>> Best Regards,
>>>>>>>>>> Ashish Kurian
>>>>>>>>>> _______________________________________________
>>>>>>>>>> users mailing list
>>>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>>>>
http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>>>
>>>>>>>>>> To unsubscribe:
users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>> users mailing list
>> users(a)lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/users
>>
>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>
>
>
> --
> Yatin Karel
>
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
12:23 a.m.
New subject: [TripleO] Undercloud unreachable
Hi Ashish,
On Tue, May 12, 2020 at 11:39 AM Ashish Kurian <ashishbnv(a)gmail.com> wrote:
Hello Yatin,
I am deploying on a baremetal. The configuration is Centos 7. 16GB Ram. I
hope this much of information about my machine configuration is sufficient.
Let me know if you need more details like the kernel version or anything
else.
Yes for this issue this information is sufficient, and 16GB is less for the
configuration you are trying to deploy. As Phil said with 16 GB swap your
installation might complete but better would be to go with more RAM then
swap as with swap it will be slow.
Following your suggestion, I tried with the Train release and the
undercloud succeeded and the process went much further. However, the
process failed (remained stuck) at deploying overcloud phase.
Do you think this could be due to insufficient amount of memory? I
have
ordered for another 16GB of RAM and it will arrive today.
Yes, this could also be related to configuration, so suggest you try after
updating RAM. You checked at which task it was stuck?
Also, what is the correct procedure to rerun the deployment rather than
starting from the scratch with a new Centos installation?
Re installation of CentOS on your baremetal machine is not needed(But if
you try to deploy master ensure you have CentOS8 installed as base OS, for
train or older you can go with CentOS7).
quickstart will take care of cleanup of deployment when doing redeployment.
Just ensure you cleanup the workspace(default is ~/.quickstart, rm -rf
~/.quickstart) or use --clean with quickstart.sh. You can also check out
phased installation[1].
[1]
https://docs.openstack.org/tripleo-quickstart/latest/getting-started.html
Best Regards,
Ashish Kurian
On Mon, May 11, 2020 at 9:44 AM YATIN KAREL <yatinkarel(a)gmail.com> wrote:
> Hi Ashish,
>
> On Sun, May 10, 2020 at 12:08 AM Ashish Kurian <ashishbnv(a)gmail.com>
> wrote:
>
>>
>> Helllo Folks,
>>
>> I am still waiting for some assistance from this group. Really cannot
>> proceed without that.
>>
> Can u share more details wrt to your environment like which release you
> are trying to deploy, you deploying on a baremetal or a vm, what's the
> configuration of baremetal/vm, how you trying to deploy, etc so people on
> list have more context.
> Recently there was a bug wrt slow overcloud nodes
> https://bugs.launchpad.net/tripleo/+bug/1873892 which is fixed in Train.
>
> In your case it's undercloud ssh failing, and i believe it's also due to
> slow nodes(as you said you are able to SSH to undercloud manually). I
> assume you are using tripleo-quickstart to deploy, if yes you can try
> similar retry/pause in quickstart to see if it helps.
>
> Also you can join freenode channel #tripleo, #oooq to have quicker
> feedback.
>
>
>>
>> Best Regards,
>> Ashish Kurian
>>
>>
>> On Mon, May 4, 2020 at 6:44 PM Ashish Kurian <ashishbnv(a)gmail.com>
>> wrote:
>>
>>> Hello Folks,
>>>
>>> For my previous question to the mailing list, Arkady was able to figure
>>> out the exact error message that was being generated in the logs. I am
>>> forwarding my email conversation with Arkady so that all the information is
>>> collected in the email.
>>>
>>> Additionally I am attaching the undercloud logs collected using the
>>> LogTools utility with run mode 8, if required.
>>>
>>> Can anyone in this list, help me with identifying what is wrong with
>>> the template and where can I locate this template to take a look into it?
>>>
>>> Best Regards,
>>> Ashish Kurian
>>>
>>>
>>> ---------- Forwarded message ---------
>>> From: Arkady Shtempler <ashtempl(a)redhat.com>
>>> Date: Mon, May 4, 2020 at 4:23 PM
>>> Subject: Re: [rdo-users] [TripleO] Undercloud unreachable
>>> To: Ashish Kurian <ashishbnv(a)gmail.com>
>>>
>>>
>>> Hi Ashish!
>>>
>>> I was able to find these Errors (these are nor related to SSH problem
>>> that you have, but indicates on some FATAL error in used templates) in
>>> *builder-undercloud.log*
>>>
>>> ~~~~~~~~~~~~~~~~
>>> /home/ashtempl/zahlabut/home/stack/builder-undercloud.log
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> 2058- Updating : linux-firmware-20191203-76.gite8a0f4c.el7.noarch
>>> 273/629
>>> 2059- Installing : kernel-3.10.0-1127.el7.x86_64
>>> 274/629
>>>
>>> *2060:grubby fatal error: unable to find a suitable template2061:grubby
>>> fatal error: unable to find a suitable template*
>>> 2062- Updating : libreport-filesystem-2.1.11-53.el7.centos.x86_64
>>> 275/629
>>> 2063- Updating : mdadm-4.1-4.el7.x86_64
>>> 276/629
>>> 2064- Updating : 1:libguestfs-1.40.2-9.el7.x86_64
>>> 277/629
>>> 2065- Updating : 1:python-libguestfs-1.40.2-9.el7.x86_64
>>> 278/629
>>> 2066- Updating : fence-agents-all-4.2.1-30.el7.x86_64
>>> 279/629
>>> 2067- Updating : 2:docker-1.13.1-161.git64e9980.el7_8.x86_64
>>> 280/629
>>> 2068- Updating : conntrack-tools-1.4.4-7.el7.x86_64
>>> 281/629
>>>
>>>
>>>
>>> 2421-No '/dev/log' or 'logger' included for syslog logging
>>> 2422-No '/dev/log' or 'logger' included for syslog logging
>>>
>>> *2423:grubby fatal error: unable to find a suitable template2424:grubby
>>> fatal error: unable to find a suitable template*
>>> 2425- Verifying : 10:qemu-kvm-common-ev-2.12.0-44.1.el7_8.1.x86_64
>>> 1/629
>>> 2426- Verifying : 1:grub2-tools-2.02-0.81.el7.centos.x86_64
>>> 2/629
>>> 2427- Verifying : certmonger-0.78.4-12.el7.x86_64
>>> 3/629
>>> 2428- Verifying : boost-program-options-1.53.0-28.el7.x86_64
>>> 4/629
>>> 2429- Verifying : dracut-config-rescue-033-568.el7.x86_64
>>> 5/629
>>> 2430- Verifying : libvirt-daemon-driver-qemu-4.5.0-33.el7.x86_64
>>> 6/629
>>> 2431- Verifying : 1:libguestfs-1.40.2-9.el7.x86_64
>>> 7/629
>>>
>>>
>>>
>>> 1780- Updating : ipa-common-4.6.6-11.el7.centos.noarch
>>> 3/629
>>> 1781- Updating : setup-2.8.71-11.el7.noarch
>>> 4/629newaliases: warning: valid_hostname: invalid character
>>> 40(decimal)...<--LogTool-LINE IS TOO LONG!
>>> *1782:newaliases: fatal: unable to use my own hostname*
>>> 1783-
>>> 1784-warning: /etc/shadow created as /etc/shadow.rpmnew
>>> 1785- Updating : 32:bind-license-9.11.4-16.P2.el7_8.2.noarch
>>> 5/629
>>> 1786- Updating :
>>> subscription-manager-rhsm-certificates-1.24.26-1.el7.c 6/629
>>> 1787- Updating : ipa-client-common-4.6.6-11.el7.centos.noarch
>>> 7/629
>>> 1788- Updating : 1:grub2-pc-modules-2.02-0.81.el7.centos.noarch
>>> 8/629
>>> 1789- Updating : libvirt-bash-completion-4.5.0-33.el7.x86_64
>>> 9/629
>>>
>>> BTW - maybe you can try to run LogTool
>>> <https://github.com/zahlabut/LogTool> you need to run mode number 8, I
>>> mean:
>>> 8) - Export ERRORs/WARNINGs from Undercloud logs
>>> Actually it's very simple to use this tool, you just have to clone it
>>> to your Undercloud host and to start PyTool.py
>>>
>>> Thanks!
>>>
>>> On Mon, May 4, 2020 at 5:05 PM Ashish Kurian <ashishbnv(a)gmail.com>
>>> wrote:
>>>
>>>> Hello Arkady,
>>>>
>>>> Please find the two set of log files.
>>>>
>>>> Just to make your analysis easier, the quickstart is failing at the
>>>> playbook :
>>>>
>>>> TASK [Gathering Facts]
>>>>
********************************************************************************************************************************************************************************
>>>> task path: /home/ashish/.quickstart/playbooks/quickstart.yml:67
>>>>
>>>> Best Regards,
>>>> Ashish Kurian
>>>>
>>>>
>>>> On Mon, May 4, 2020 at 3:50 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi!
>>>>>
>>>>> I'm not sure that you'll be able to get them all in one zip
file that
>>>>> won't exceed max email attachment size.
>>>>> Let's start with log files that you have under /home/stack and
>>>>> /var/log
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>>
>>>>> On Mon, May 4, 2020 at 4:36 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Arkady,
>>>>>>
>>>>>> Do you need all of them? How should I provide them to you? Over
>>>>>> email or something else?
>>>>>>
>>>>>> Best Regards,
>>>>>> Ashish Kurian
>>>>>>
>>>>>>
>>>>>> On Mon, May 4, 2020 at 3:33 PM Arkady Shtempler
<ashtempl(a)redhat.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Ashish!
>>>>>>>
>>>>>>> On your Undercloud host you have a bunch of logs under:
>>>>>>> ['/var/log', '/home/stack',
'/usr/share/', '/var/lib/']'
>>>>>>>
>>>>>>> Thanks!
>>>>>>>
>>>>>>>
>>>>>>> On Mon, May 4, 2020 at 4:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Arkady,
>>>>>>>>
>>>>>>>> I appreciate your help. Ofcourse I can provide you the
required
>>>>>>>> log files. However, can you let me know what log file are
you looking for
>>>>>>>> and where they are located?
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Ashish Kurian
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, May 4, 2020 at 3:17 PM Arkady Shtempler <
>>>>>>>> ashtempl(a)redhat.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Ashish!
>>>>>>>>>
>>>>>>>>> Is that possible to get the access to your log
files?
>>>>>>>>>
>>>>>>>>> Thanks!
>>>>>>>>>
>>>>>>>>> On Mon, May 4, 2020 at 2:28 PM Ashish Kurian
<ashishbnv(a)gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hello Folks,
>>>>>>>>>>
>>>>>>>>>> For my TripleO installation, I am constantly
getting failure to
>>>>>>>>>> reach the undercloud with the message:
>>>>>>>>>>
>>>>>>>>>> MSG:
>>>>>>>>>>
>>>>>>>>>> Data could not be sent to remote host
"undercloud". Make sure
>>>>>>>>>> this host can be reached over ssh: Warning:
Permanently added 'undercloud'
>>>>>>>>>> (ECDSA) to the list of known hosts.
>>>>>>>>>> System is booting up. See pam_nologin(8)
>>>>>>>>>> Authentication failed.
>>>>>>>>>>
>>>>>>>>>> When I actually try to manually ssh into the
undercloud using
>>>>>>>>>> the actual commands, I am able to login into the
undercloud.
>>>>>>>>>>
>>>>>>>>>> Can someone help me what might be the problem?
>>>>>>>>>>
>>>>>>>>>> Best Regards,
>>>>>>>>>> Ashish Kurian
>>>>>>>>>> _______________________________________________
>>>>>>>>>> users mailing list
>>>>>>>>>> users(a)lists.rdoproject.org
>>>>>>>>>>
http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>>>>
>>>>>>>>>> To unsubscribe:
users-unsubscribe(a)lists.rdoproject.org
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>> users mailing list
>> users(a)lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/users
>>
>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>
>
>
> --
> Yatin Karel
>
Thanks and Regards
Yatin Karel
1687
days inactive
1696
days old
7 comments
4 participants
participants (4)
-
Ashish Kurian -
Phill. Whiteside -
Ruslanas Gžibovskis -
YATIN KAREL