Re: [rdo-users] UnderCloud Failed for Stein
by Pradeep Antil
Hi Alex and Team,
As per your suggestion i have used latest version of CentOS 7.6, it
automatically set fstype=1 for XFS file system and which ultimately resolve
below said issue.
When i try to install undercloud, it download almost all container images
and start the containers via podman. But in the last i am getting beneath
errors, which says not able to pull container image
"tripleostein/centos-binary-nova-compute-ironic:current-tripleo".
Any ideas and suggestions?
"time=\"2019-06-21T01:20:42-04:00\" level=error msg=\"Error pulling image
ref //tripleostein/centos-binary-nova-compute-ironic:current-tripleo: Error
reading blob
sha256:66daf3b88294952a8eb2290888646a0dc54a9799fd94daa3674996c3e3bf2177:
Get
https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/b...:
dial tcp: lookup production.cloudflare.docker.com on 192.168.1.1:53: no
such host\" ",
"Failed",
"Error: error pulling image \"
docker.io/tripleostein/centos-binary-nova-compute-ironic:current-tripleo\":
unable to pull
docker.io/tripleostein/centos-binary-nova-compute-ironic:current-tripleo:
unable to pull image: Error reading blob
sha256:66daf3b88294952a8eb2290888646a0dc54a9799fd94daa3674996c3e3bf2177:
Get
https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/b...:
dial tcp: lookup production.cloudflare.docker.com on 192.168.1.1:53: no
such host",
"stdout:
38121be0fb7fc2f90361ab5b213c16293943afa17134fe96b8e22fab736996e4",
"stderr: Trying to pull
docker.io/tripleostein/centos-binary-swift-account:current-tripleo...Getting
image source signatures",
"Copying blob
sha256:a3fa68d16c4b1f98e79bfba672df9f463c604ddda7e83cd724c833f4c586cb16",
"Copying blob
sha256:6acc5092704370257189f2e842dc2a1237c102c91214b64eed56b2ab779c4837",
"Copying blob
sha256:8b18b698c5e53a098cc204fce32ff87382192cd53baeb3dcd641ac06c0e4be5c",
"Copying blob
sha256:16b6fb2152f8d39d4cadc25e94ebb0d200201b3f1facc53b18db98e00f6eb891",
"Copying blob
sha256:6babe638ad07ac4b260a134fb3e22dbca32374684ccf970cd2908c084aecf868",
"Copying blob
sha256:3b53b2a0b7099498bd724a4bc1de79b0907e75ff8d00086a23d0faed2bddf329",
"Copying blob
sha256:76c3f3108d8bc1515ab689d1b527f0c813eb57c693a934ea8c40a6ef6d985db7",
"Copying blob
sha256:b9ee4442559089c190529dfa14ece03e972223dc01c2d4b6093652bdde9f3654",
"Copying config
sha256:38121be0fb7fc2f90361ab5b213c16293943afa17134fe96b8e22fab736996e4",
"Writing manifest to image destination",
"Storing signatures",
"stdout:
a8663b8e7383c1a3bf78c0895fb75ad3a4777df55a1679a7501605271300b717",
"stderr: Trying to pull
docker.io/tripleostein/centos-binary-swift-object:current-tripleo...Getting
image source signatures",
"Copying blob
sha256:2e8b7353e3df533697295f3a6d0050ab4a0f9fad97cd0483aa69d4b82f632721",
"Copying blob
sha256:4065fdc1a40b76c33e05f9891749fda2fce368a2972541394ea76f9ebec2fdbb",
"Copying config
sha256:a8663b8e7383c1a3bf78c0895fb75ad3a4777df55a1679a7501605271300b717"
]
}
]
]
Install artifact is located at
/home/stack/undercloud-install-20190621052125.tar.bzip2
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Deployment Failed!
ERROR: Heat log files: /var/log/heat-launcher/undercloud_deploy-mRI2p4
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Deployment failed.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
An error has occured while deploying the Undercloud.
See the previous output for details about what went wrong.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
On Thu, Jun 20, 2019 at 9:21 PM Alex Schultz <aschultz(a)redhat.com> wrote:
> It's the default so as long as you're using a version of the xfs tools
> from 7.4 or higher, it should be ftype=1.
>
> On Thu, Jun 20, 2019 at 9:39 AM Pradeep Antil <pradeepantil(a)gmail.com>
> wrote:
>
>> Hi Alex,
>>
>> is there any way to specify ftype=1 for XFS during OS installation, I
>> tried it from my end but i didn't find any option during installation.
>>
>> or do i need to create a separate /var file system with XFS and then
>> after the installation reformat it with ftype=1 option.
>>
>> What is your suggestion ?
>>
>>
>>
>>
>>
>> On Thu, Jun 20, 2019 at 8:52 PM Alex Schultz <aschultz(a)redhat.com> wrote:
>>
>>> You can use ext4, we primarily test xfs though.
>>>
>>> On Thu, Jun 20, 2019 at 9:21 AM Pradeep Antil <pradeepantil(a)gmail.com>
>>> wrote:
>>>
>>>> Hi Alex,
>>>>
>>>> Thanks for the useful information and reply.
>>>>
>>>> Will this issue go away if use ext4 file system in place of XFS ?
>>>>
>>>> or is it mandatory to use xfs file system for Undercloud OS ?
>>>>
>>>>
>>>>
>>>> On Thu, Jun 20, 2019 at 7:22 PM Alex Schultz <aschultz(a)redhat.com>
>>>> wrote:
>>>>
>>>>> This error is caused by an xfs file system with ftype=0. You need
>>>>> ftype=1 for the container file system to work correctly. ftype=1 was the
>>>>> default setting when formatting a filesystem starting with CentOS/RHEL
>>>>> 7.3. If you're starting by using a cloud image, make sure its a recent one.
>>>>>
>>>>> https://bugs.launchpad.net/tripleo/+bug/1765121
>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1564671
>>>>>
>>>>> On Thu, Jun 20, 2019 at 2:59 AM Alfredo Moralejo Alonso <
>>>>> amoralej(a)redhat.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> What version of CentOS are you using for the underlying OS in the
>>>>>> undercloud and how did you deploy it?
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Alfredo
>>>>>>
>>>>>>
>>>>>> On Thu, Jun 20, 2019 at 10:47 AM Pradeep Antil <
>>>>>> pradeepantil(a)gmail.com> wrote:
>>>>>>
>>>>>>> Hi Folks,
>>>>>>>
>>>>>>> I am trying to install undercloud on CentOS 7 VirtualBox VM. Two
>>>>>>> Nics are assigned to VM, first NIC is used for Provisioning N/w(
>>>>>>> 192.168.56.0/24) and second is used for internet (NAT - 10.0.3.15)
>>>>>>>
>>>>>>> When i try to install undercloud using below command, getting the
>>>>>>> following error,
>>>>>>>
>>>>>>> Any idea and suggestion to resolve the error.
>>>>>>>
>>>>>>> [stack@undercloud ~]$ openstack undercloud install
>>>>>>>
>>>>>>> TASK [Restart Keepalived container]
>>>>>>> *******************************************************************************************
>>>>>>> fatal: [undercloud]: FAILED! => {"changed": true, "cmd": "podman
>>>>>>> restart keepalived", "delta": "0:00:00.090226", "end": "2019-06-20
>>>>>>> 03:50:58.583423", "msg": "non-zero return code", "rc": 125, "start":
>>>>>>> "2019-06-20 03:50:58.493197", "stderr": "Error: error creating libpod
>>>>>>> runtime: kernel does not support overlay fs: overlay: the backing xfs
>>>>>>> filesystem is formatted without d_type support, which leads to incorrect
>>>>>>> behavior. Reformat the filesystem with ftype=1 to enable d_type support.
>>>>>>> Running without d_type is not supported.: driver not supported",
>>>>>>> "stderr_lines": ["Error: error creating libpod runtime: kernel does not
>>>>>>> support overlay fs: overlay: the backing xfs filesystem is formatted
>>>>>>> without d_type support, which leads to incorrect behavior. Reformat the
>>>>>>> filesystem with ftype=1 to enable d_type support. Running without d_type is
>>>>>>> not supported.: driver not supported"], "stdout": "", "stdout_lines": []}
>>>>>>> ...ignoring
>>>>>>>
>>>>>>> [stack@undercloud ~]$ df -Th
>>>>>>> Filesystem Type Size Used Avail Use% Mounted on
>>>>>>> /dev/mapper/centos-root xfs 31G 2.3G 29G 8% /
>>>>>>> devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev
>>>>>>> tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
>>>>>>> tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run
>>>>>>> tmpfs tmpfs 3.9G 0 3.9G 0%
>>>>>>> /sys/fs/cgroup
>>>>>>> /dev/sda1 xfs 497M 141M 356M 29% /boot
>>>>>>> tmpfs tmpfs 782M 0 782M 0% /run/user/0
>>>>>>> tmpfs tmpfs 500M 36M 465M 8%
>>>>>>> /var/log/heat-launcher
>>>>>>> [stack@undercloud ~]$ free -h
>>>>>>> total used free shared buff/cache
>>>>>>> available
>>>>>>> Mem: 7.6G 232M 5.7G 44M 1.7G
>>>>>>> 7.0G
>>>>>>> Swap: 3.5G 0B 3.5G
>>>>>>> [stack@undercloud ~]$
>>>>>>>
>>>>>>> [stack@undercloud ~]$ cat ~/undercloud.conf
>>>>>>> # Config generated by undercloud wizard
>>>>>>> # Use these values in undercloud.conf
>>>>>>> [DEFAULT]
>>>>>>> undercloud_hostname = undercloud.localdomain
>>>>>>> local_interface = enp0s3
>>>>>>> local_mtu = 1500
>>>>>>> local_ip = 192.168.56.2/24
>>>>>>> undercloud_public_host = 192.168.56.3
>>>>>>> undercloud_admin_host = 192.168.56.4
>>>>>>> undercloud_service_certificate =
>>>>>>> generate_service_certificate = True
>>>>>>> scheduler_max_attempts = 10
>>>>>>>
>>>>>>> # Deprecated names for compatibility with older releases
>>>>>>> discovery_iprange = 192.168.56.16,192.168.56.20
>>>>>>> undercloud_public_vip = 192.168.56.3
>>>>>>> undercloud_admin_vip = 192.168.56.4
>>>>>>> network_cidr = 192.168.56.0/24
>>>>>>> dhcp_start = 192.168.56.6
>>>>>>> dhcp_end = 192.168.56.15
>>>>>>> inspection_iprange = 192.168.56.16,192.168.56.20
>>>>>>> network_gateway = 192.168.56.1
>>>>>>> #masquerade_network = 192.168.56.0/24
>>>>>>> # End of deprecated names
>>>>>>>
>>>>>>> [ctlplane-subnet]
>>>>>>> cidr = 192.168.56.0/24
>>>>>>> gateway = 192.168.56.1
>>>>>>> dhcp_start = 192.168.56.6
>>>>>>> dhcp_end = 192.168.56.15
>>>>>>> inspection_iprange = 192.168.56.16,192.168.56.20
>>>>>>> #masquerade = true
>>>>>>>
>>>>>>> [stack@undercloud ~]$
>>>>>>>
>>>>>>> --
>>>>>>> Best Regards
>>>>>>> Pradeep Kumar
>>>>>>> _______________________________________________
>>>>>>> users mailing list
>>>>>>> users(a)lists.rdoproject.org
>>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>>
>>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>>
>>>>>> _______________________________________________
>>>>>> users mailing list
>>>>>> users(a)lists.rdoproject.org
>>>>>> http://lists.rdoproject.org/mailman/listinfo/users
>>>>>>
>>>>>> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>>>>>>
>>>>>
>>>>
>>>> --
>>>> Best Regards
>>>> Pradeep Kumar
>>>>
>>>
>>
>> --
>> Best Regards
>> Pradeep Kumar
>>
>
--
Best Regards
Pradeep Kumar
7 years
Verify Tunnel Traffic
by Todd Leishman
Hello,
I am setting up OpenStack with Packstack – 1 Controller node + 2 Compute Nodes.
In the instructions here:
https://www.rdoproject.org/install/adding-a-compute-node/
It says to “Set CONFIG_NEUTRON_OVS_TUNNEL_IF to eth1 or whatever name your network card uses.” In order to isolate tenant traffic. I have done this (although using ens2f1).
After running Packstack with the answer file, my line:
Set CONFIG_NEUTRON_OVS_TUNNEL_IF=ens2f1
Is changed to:
Set CONFIG_NEUTRON_OVS_TUNNEL_IF=
The ens2f1 has been removed.
How do I verify in OpenStack that the tunnel has actually been created and that tenant traffic is actually using ens2f1?
Thanks for your help!
Todd Leishman
toddleish(a)gmail.com
7 years
UnderCloud Failed for Stein
by Pradeep Antil
Hi Folks,
I am trying to install undercloud on CentOS 7 VirtualBox VM. Two Nics are
assigned to VM, first NIC is used for Provisioning N/w(192.168.56.0/24) and
second is used for internet (NAT - 10.0.3.15)
When i try to install undercloud using below command, getting the
following error,
Any idea and suggestion to resolve the error.
[stack@undercloud ~]$ openstack undercloud install
TASK [Restart Keepalived container]
*******************************************************************************************
fatal: [undercloud]: FAILED! => {"changed": true, "cmd": "podman restart
keepalived", "delta": "0:00:00.090226", "end": "2019-06-20
03:50:58.583423", "msg": "non-zero return code", "rc": 125, "start":
"2019-06-20 03:50:58.493197", "stderr": "Error: error creating libpod
runtime: kernel does not support overlay fs: overlay: the backing xfs
filesystem is formatted without d_type support, which leads to incorrect
behavior. Reformat the filesystem with ftype=1 to enable d_type support.
Running without d_type is not supported.: driver not supported",
"stderr_lines": ["Error: error creating libpod runtime: kernel does not
support overlay fs: overlay: the backing xfs filesystem is formatted
without d_type support, which leads to incorrect behavior. Reformat the
filesystem with ftype=1 to enable d_type support. Running without d_type is
not supported.: driver not supported"], "stdout": "", "stdout_lines": []}
...ignoring
[stack@undercloud ~]$ df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 31G 2.3G 29G 8% /
devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 141M 356M 29% /boot
tmpfs tmpfs 782M 0 782M 0% /run/user/0
tmpfs tmpfs 500M 36M 465M 8%
/var/log/heat-launcher
[stack@undercloud ~]$ free -h
total used free shared buff/cache
available
Mem: 7.6G 232M 5.7G 44M 1.7G
7.0G
Swap: 3.5G 0B 3.5G
[stack@undercloud ~]$
[stack@undercloud ~]$ cat ~/undercloud.conf
# Config generated by undercloud wizard
# Use these values in undercloud.conf
[DEFAULT]
undercloud_hostname = undercloud.localdomain
local_interface = enp0s3
local_mtu = 1500
local_ip = 192.168.56.2/24
undercloud_public_host = 192.168.56.3
undercloud_admin_host = 192.168.56.4
undercloud_service_certificate =
generate_service_certificate = True
scheduler_max_attempts = 10
# Deprecated names for compatibility with older releases
discovery_iprange = 192.168.56.16,192.168.56.20
undercloud_public_vip = 192.168.56.3
undercloud_admin_vip = 192.168.56.4
network_cidr = 192.168.56.0/24
dhcp_start = 192.168.56.6
dhcp_end = 192.168.56.15
inspection_iprange = 192.168.56.16,192.168.56.20
network_gateway = 192.168.56.1
#masquerade_network = 192.168.56.0/24
# End of deprecated names
[ctlplane-subnet]
cidr = 192.168.56.0/24
gateway = 192.168.56.1
dhcp_start = 192.168.56.6
dhcp_end = 192.168.56.15
inspection_iprange = 192.168.56.16,192.168.56.20
#masquerade = true
[stack@undercloud ~]$
--
Best Regards
Pradeep Kumar
7 years
[Meeting] RDO meeting (2019-06-19) minutes
by YATIN KAREL
==============================
#rdo: RDO meeting - 2019-06-19
==============================
Meeting started by ykarel at 15:01:34 UTC. The full logs are available
athttp://eavesdrop.openstack.org/meetings/rdo_meeting___2019_06_19/2019/r...
.
Meeting summary
---------------
* roll call (ykarel, 15:02:28)
* Update on Pike EOL in RDO:- https://trello.com/c/6e0bVGzK (ykarel,
15:05:22)
* open floor (ykarel, 15:11:29)
* chair for next meeting (ykarel, 15:16:47)
* LINK: https://review.opendev.org/#/c/652847/ (mwhahaha, 15:19:14)
* ACTION: PagliaccisCloud to chair next meeting (ykarel, 15:25:22)
Meeting ended at 15:29:31 UTC.
Action items, by person
-----------------------
* PagliaccisCloud
* PagliaccisCloud to chair next meeting
People present (lines said)
---------------------------
* ykarel (34)
* amoralej (11)
* mwhahaha (7)
* mjturek (6)
* openstack (6)
* PagliaccisCloud (2)
* EmilienM (2)
* jpena (1)
* rlandy (1)
Generated by `MeetBot`_ 0.1.4
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
7 years
RDO Pike going EOL
by Alfredo Moralejo Alonso
Hi,
OpenStack Pike was moved to Extended Maintenance upstream [1]. This means
that no more releases will be produced for Pike series and there is no
commitment on validation. Also, some projects may decide to not maintain
the branches and go to EOL.
>From the RDO perspective, this means that we are setting RDO CloudSIG Pike
repo as EOL and the repositories will be dropped from CentOS official
mirrors on next oportunity (when CentOS 7.7 is published).
For users that still want to keep using packages from pike branches tip, we
will keep the RDO Trunk Pike repo running in [2] chasing any new commit
being merged, but note that we will probably stop running CI on it at some
point in the near future.
Best regards,
Alfredo
[1]
https://docs.openstack.org/project-team-guide/stable-branches.html#extend...
[2] https://trunk.rdoproject.org/centos7-pike/report.html
7 years
[Meeting] RDO Meeting (2019-06-12) minutes
by Javier Pena
==============================
#rdo: RDO meeting - 2019-06-12
==============================
Meeting started by jpena at 15:00:29 UTC. The full logs are available
at
http://eavesdrop.openstack.org/meetings/rdo_meeting___2019_06_12/2019/rdo...
.
Meeting summary
---------------
* roll call (jpena, 15:00:33)
* Pike is now extended maintenance, time for EOL in RDO (jpena,
15:03:58)
* ACTION: amoralej to send a mail about Pike CloudSIG repos being EOL
(amoralej, 15:09:54)
* tracking pike removal in
https://trello.com/c/6e0bVGzK/712-pike-is-em-removal-from-rdo
(amoralej, 15:13:09)
* altarch container discussion (jpena, 15:14:02)
* New release of python-sqlalchemy-collectd requires collectd subpackage
which is included in opstools (jpena, 15:27:40)
* LINK: https://review.opendev.org/#/c/659678/ (amoralej, 15:31:25)
* LINK: https://review.opendev.org/#/c/659678/ is running with centos7
so we need to provide it (amoralej, 15:40:41)
* ACTION: amoralej to follow-up with mrunge about the topic
(amoralej, 15:45:03)
* Next week's chair (jpena, 15:45:58)
* ACTION: ykarel to chair the next meeting (jpena, 15:47:29)
* open floor (jpena, 15:47:36)
Meeting ended at 15:54:56 UTC.
Action items, by person
-----------------------
* amoralej
* amoralej to send a mail about Pike CloudSIG repos being EOL
* amoralej to follow-up with mrunge about the topic
* mrunge
* amoralej to follow-up with mrunge about the topic
* ykarel
* ykarel to chair the next meeting
People present (lines said)
---------------------------
* amoralej (76)
* jpena (31)
* mjturek (27)
* ykarel (19)
* mrunge (12)
* zzzeek (12)
* openstack (5)
* baha (2)
* gfidente (2)
* mriosfer (1)
* apevec (1)
Generated by `MeetBot`_ 0.1.4
7 years
OpenInfrastructure Summit Shanghai
by Rain Leander
Hello RDO Community!
Call for Presentations is open for the Open Infrastructure Summit [0] to be
held in Shanghai, China 4-6 November 2019!
** Deadline to submit your presentations, panels, and workshops [1] is July
2, 2019 at 11:59pm PT (July 3 at 6:59 UTC).
Here are the Summit Tracks [2] that span Cloud, Ansible, Ceph, Kubernetes,
Edge, etc., to give you a sense of the types of topics you can propose.
** NOTE: Before submitting a session, please ensure that you have approval
to attend from your leadership, especially as this event is in China and
you may need a visa.
If you have any questions, please don't hesitate to reach out!
[0] https://www.openstack.org/summit/shanghai-2019
[1] https://cfp.openstack.org/
[2] https://www.openstack.org/summit/shanghai-2019/summit-categories
--
K Rain Leander
OpenStack Community Liaison
Open Source Program Office
https://www.rdoproject.org/
http://community.redhat.com
7 years, 1 month
Upcoming Meetups
by Rain Leander
The following are the meetups I'm aware of over the next two weeks where
OpenStack and/or RDO enthusiasts are likely to be present. If you know of
others, please let me know, and/or add them to http://rdoproject.org/events
If there's a meetup in your area, it'd be super keen if you attended, took
a few pictures and especially wrote up a summary of what was covered. And,
as always, if you give me enough notice, I can send swag along with you.
~Rain.
* Monday June 03 in Minneapolis, MN, US: OpenStack Developer Coffee and
Code - https://www.meetup.com/OpenInfraMN/events/261806365/
* Thursday June 13 in Stockholm, SE: OpenInfra Forum #6! -
https://www.meetup.com/OpenStack-User-Group-Sweden/events/260348177/
--
K Rain Leander
OpenStack Community Liaison
Open Source Program Office
https://www.rdoproject.org/
http://community.redhat.com
7 years, 1 month
