Hi, and thank you for your help. As I said, after re-reading the documentation, I found the new documentation, and I tried to follow it, but it's not clear. First of all, I did not find the "/usr/share/openstack-tripleo-heat-templates/network-data-samples" directory in my system, so I used the one from the GIT. 1 - I modified the network_data.yaml file as needed. 2 - Then I copied the vip_data.yaml file as is without modification. 3 - I created then the network-environment-overrides.yaml using this link ( https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu...), I wanted to use bond-with-vlans configuration. 4 - I used this file ( https://opendev.org/openstack/tripleo-ansible/src/branch/master/tripleo_a...) and I modified it to create my bonds and vlans and to map them to the different networks. 5 - I created the networks-deployed-environment.yaml as mentioned like this : openstack overcloud network provision --output networks-deployed-environment.yaml network_data.yaml 6 - Then I created the vip-deployed-environment.yaml using : openstack overcloud network vip provision --output ~/templates/vip-deployed-environment.yaml ~/templates/vip_data.yaml Am I correct till now? my conf files are attached Then the documentation says, if you want to deploy use : a - this command openstack overcloud deploy --templates \ -n network_data.yaml \ -e networks-deployed-environment.yaml \ -e vip-deployed-environment.yaml \ -e network-environment-overrides.yaml b - Or this command openstack overcloud deploy --templates \ --networks-file network_data.yaml \ --vip-file vip_data.yaml \ --baremetal-deployment baremetal_deployment.yaml \ --network-config \ -e network-environment-overrides.yaml What I don't understand is the difference between the two of them, Does the first command mean : deploy the configuration on the already deployed nodes (or already deployed overcloud)? And does the second command mean : deploy the OS on the overcloud nodes before deploying the overcloud itself? PS : for the network part : Each overcloud node has 6 nics : - 2 nics will be bonded and used for the provisioning network. -> I didn't know how to modify the bonds_vlans.j2 to create a bond on the ctplane network. - 2 nics will be bonded and used for the external, api and tenant networks. - 2 nics will be bonded and used on the storage and the storage management networks. Regards. Le jeu. 12 août 2021 à 03:04, Wan, Sam <Sam.Wan(a)dell.com&gt; a écrit : > Hi Wodel Youchi, > > > > You’re using the template for Victoria and prior releases according to > https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu... > . > > > > For wallaby, the hierarchy is like this: > > *name* > > Name of the network (mandatory) > > *vip* > > Enable creation of a virtual IP on this network > > *subnets* > > Dictionary’s, one or more subnet definition items keyed by the subnet > name. > > *subnet_name* > > Name of the subnet > > *ip_subnet* > > IP/CIDR, e.g. *'10.0.0.0/24 <http://10.0.0.0/24>'* > > *allocation_pools* > > IP range list, e.g. *[{'start':'10.0.0.4',* *'end':'10.0.0.250'}]* > > *gateway_ip* > > Gateway for the network > > *vlan* > > Vlan ID for this network. (supported in Queens and later) > > > > And there’s an example in the doc > > - *name*: CustomNetwork > > *vip*: false > > *name_lower*: custom_network > > *subnets*: > > *custom_network_subnet*: > > *ip_subnet*: 172.16.6.0/24 > > *allocation_pools*: > > - *start*: 172.16.6.4 > > - *end*: 172.16.6.250 > > *gateway_ip*: 172.16.6.1 > > > > > > Another example in the doc: > > *subnets*: > > *subnet_name_a*: > > *ip_subnet*: 192.0.2.0/24 > > *allocation_pools*: > > - *start*: 192.0.2.50 > > *end*: 192.0.2.99 > > *gateway_ip*: 192.0.2.1 > > *vlan*: 102 > > *subnet_name_b*: > > *ip_subnet*: 198.51.100.0/24 > > *allocation_pools*: > > - *start*: 198.51.100.50 > > *end*: 198.51.100.99 > > *gateway_ip*: 198.51.100.1 > > *vlan*: 101 > > > > > > So your network_data.yaml should be like this: > > - name: Storage > > vip: true > > mtu: 1500 > > name_lower: storage > > subnets: > > storage_subnet: > > ip_subnet: 10.100.7.0/24 > > allocation_pools: [{'start': '10.100.7.150', 'end': '10.100.7.250'} > > vlan: 1107 > > - name: StorageMgmt > > vip: true > > mtu: 1500 > > name_lower: storage_mgmt > > subnets: > > storagemgmt_subnet: > > ip_subnet: 10.100.8.0/24 > > allocation_pools: [{'start': '10.100.8.150', 'end': '10.100.8.250'} > > vlan: 1108 > > - name: InternalApi > > vip: true > > mtu: 1500 > > name_lower: internal_api > > subnets: > > internalapi_subnet: > > ip_subnet: 10.100.5.0/24 > > allocation_pools: [{'start': '10.100.5.150', 'end': '10.100.5.250'}] > > vlan: 1105 > > - name: Tenant > > vip: false > > mtu: 1500 > > name_lower: tenant > > subnets: > > tenant_subnet: > > ip_subnet: 10.100.6.0/24 > > allocation_pools: [{'start': '10.100.6.150', 'end': '10.100.6.250'}] > > vlan: 1106 > > - name: External > > vip: true > > mtu: 1500 > > name_lower: external > > subnets: > > external_subnet: > > ip_subnet: 10.0.1.0/24 > > allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] > > gateway_ip: '10.0.1.1' > > vlan: 2100 > > > > > > Thanks and regards > > > > =============================== > > *sam.wan(a)dell.com <sam.wan(a)dell.com&gt;* > > *E-LAB* > > *Dell **EMC** | Technical Operations IEO* > > *Phone: **+86 (28) 82966713* > > > > *From:* wodel youchi <wodel.youchi(a)gmail.com&gt; > *Sent:* 2021年8月11日 20:42 > *To:* Wan, Sam > *Cc:* users(a)lists.rdoproject.org > *Subject:* Re: [rdo-users] Error creating network isolation file > > > > [EXTERNAL EMAIL] > > Hi, > > > > After re-reading the documentation, I found another document that > explains that there were new modifications in Wallaby (https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deplo... > [docs.openstack.org] > <https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid... > ). > > The document points to other links like this one (https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu... > [docs.openstack.org] > <https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid...>), > it's really hard to follow and understand the documentation. > > > > > > Regards. > > > > [avast.com] > <https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema... > > Virus-free. www.avast.com [avast.com] > <https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema... > > > > Le mer. 11 août 2021 à 05:25, Wan, Sam <Sam.Wan(a)dell.com&gt; a écrit : > > Sorry I see you’ve paste the content of your network_data.yaml. > > Please make changes to your network_data.yaml following the sample. > > > > Thanks and regards > > > > =============================== > > *sam.wan(a)dell.com <sam.wan(a)dell.com&gt;* > > *E-LAB* > > *Dell **EMC** | Technical Operations IEO* > > *Phone: **+86 (28) 82966713* > > > > *From:* Wan, Sam > *Sent:* 2021年8月11日 12:23 > *To:* 'wodel youchi'; users(a)lists.rdoproject.org > *Subject:* RE: [rdo-users] Error creating network isolation file > > > > Hi Wodel Youchi, > > > > The error is obvious. > > *Additional properties are not allowed ('ip_subnet', 'enabled', > 'allocation_pools', 'gateway_ip', 'vlan', 'ipv6_subnet', > 'ipv6_allocation_pools', 'gateway_ipv6' were unexpected) \n\nFailed schema > validation at :\n 'subnets' is a required property"* > > > > Seems you’ve specified an unexpected ‘gateway_ipv6’ in ‘Management' > network > > Could you please share your ‘network_data.yaml' File? > > > > There’s a link to network-data samples in the documentation you gave > however it’s broken. > > Create and Edit network data YAML definition file¶ [docs.openstack.org] > <https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid... > > Use the network-data-samples [opendev.org] > <https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem... > (broken) in tripleo-heat-templates [opendev.org] > <https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem... as > a reference and customize the networks, IP addressing, VLANs, etc., as per > the cluster requirements. > > > > > > But you can still find a sample in the source: https://opendev.org/openstack/tripleo-heat-templates/src/branch/stable/wa... > [opendev.org] > <https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem... > > And there’s an example with gateway_ipv6, it should be in the subnets > property. > > > > You might need to change your network-data.yaml following this sample. > > > > Thanks and regards > > > > =============================== > > *sam.wan(a)dell.com <sam.wan(a)dell.com&gt;* > > *E-LAB* > > *Dell **EMC** | Technical Operations IEO* > > *Phone: **+86 (28) 82966713* > > > > *From:* users <users-bounces(a)lists.rdoproject.org&gt; *On Behalf Of *wodel > youchi > *Sent:* 2021年8月5日 0:22 > *To:* users(a)lists.rdoproject.org > *Subject:* [rdo-users] Error creating network isolation file > > > > [EXTERNAL EMAIL] > > Hi, > > A newbie in Openstack, I am deploying an overcloud using the Wallaby > version. > > I am using "container-tools 3.0 [e]" > > > > I am trying to create the networks-deployed-environment.yaml file using : > > *openstack overcloud network provision -o > /home/stack/templates/networks-deployed-environment.yaml > /home/stack/templates/network_data.yaml * > > I am following this documentation : https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu... > [docs.openstack.org] > <https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid... > > > > But I am getting these errors on all networks defined in > network_data.yaml: > > > *2021-08-04 17:13:54.071521 | 52540075-9baf-e063-4b37-00000000000e | > FATAL | Create/Update composable networks | localhost | item={'name': > 'Management', 'enabled': True, 'vip': False, 'name_lower': 'management', > 'vlan': 60, 'ip_subnet': '10.0.1.0/24 [10.0.1.0] > <https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI...;, > 'allocation_pools': [{'start': '10.0.1.4', 'end': '10.0.1.250'}], > 'gateway_ip': '10.0.1.1', 'gateway_ipv6': 'fd00:fd00:fd00:6000::1', > 'ipv6_subnet': 'fd00:fd00:fd00:6000::/64', 'ipv6_allocation_pools': > [{'start': 'fd00:fd00:fd00:6000::10', 'end': > 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}], 'mtu': 1500} | > error={"ansible_index_var": "idx", "ansible_loop_var": "item", "changed": > false, "idx": 5, "item": {"allocation_pools": [{"end": "10.0.1.250", > "start": "10.0.1.4"}], "enabled": true, "gateway_ip": "10.0.1.1", > "gateway_ipv6": "fd00:fd00:fd00:6000::1", "ip_subnet": "10.0.1.0/24 > [10.0.1.0] > <https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI...;, > "ipv6_allocation_pools": [{"end": > "fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe", "start": > "fd00:fd00:fd00:6000::10"}], "ipv6_subnet": "fd00:fd00:fd00:6000::/64", > "mtu": 1500, "name": "Management", "name_lower": "management", "vip": > false, "vlan": 60}, "msg": "Failed schema validation at :\n Additional > properties are not allowed ('ip_subnet', 'enabled', 'allocation_pools', > 'gateway_ip', 'vlan', 'ipv6_subnet', 'ipv6_allocation_pools', > 'gateway_ipv6' were unexpected)\n\nFailed schema validation at :\n > 'subnets' is a required property"} ......* > > > > > > > > Here is my network_data.yaml : > > - name: Storage > vip: true > vlan: 1107 > name_lower: storage > ip_subnet: '10.100.7.0/24 [10.100.7.0] > <https://urldefense.com/v3/__http:/10.100.7.0/24__;!!LpKI!xc4qNPJ0garbZ7l0... > ' > allocation_pools: [{'start': '10.100.7.150', 'end': '10.100.7.250'}] > mtu: 1500 > - name: StorageMgmt > name_lower: storage_mgmt > vip: true > vlan: 1108 > ip_subnet: '10.100.8.0/24 [10.100.8.0] > <https://urldefense.com/v3/__http:/10.100.8.0/24__;!!LpKI!xc4qNPJ0garbZ7l0... > ' > allocation_pools: [{'start': '10.100.8.150', 'end': '10.100.8.250'}] > mtu: 1500 > - name: InternalApi > name_lower: internal_api > vip: true > vlan: 1105 > ip_subnet: '10.100.5.0/24 [10.100.5.0] > <https://urldefense.com/v3/__http:/10.100.5.0/24__;!!LpKI!xc4qNPJ0garbZ7l0... > ' > allocation_pools: [{'start': '10.100.5.150', 'end': '10.100.5.250'}] > mtu: 1500 > - name: Tenant > vip: false # Tenant network does not use VIPs > name_lower: tenant > vlan: 1106 > ip_subnet: '10.100.6.0/24 [10.100.6.0] > <https://urldefense.com/v3/__http:/10.100.6.0/24__;!!LpKI!xc4qNPJ0garbZ7l0... > ' > allocation_pools: [{'start': '10.100.6.150', 'end': '10.100.6.250'}] > mtu: 1500 > - name: External > vip: true > name_lower: external > vlan: 2100 > ip_subnet: '10.0.1.0/24 [10.0.1.0] > <https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI... > ' > allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] > gateway_ip: '10.0.1.1' > mtu: 1500 > > > > What I am missing. > > Regards. > > > > [avast.com] > <https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema... > > Virus-free. www.avast.com [avast.com] > <https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema... > > >