5:11 a.m.
Hi, and thank you for your help.
As I said, after re-reading the documentation, I found the new
documentation, and I tried to follow it, but it's not clear.
First of all, I did not find the
"/usr/share/openstack-tripleo-heat-templates/network-data-samples"
directory in my system, so I used the one from the GIT.
1 - I modified the network_data.yaml file as needed.
2 - Then I copied the vip_data.yaml file as is without modification.
3 - I created then the network-environment-overrides.yaml using this link (
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu...),
I wanted to use bond-with-vlans configuration.
4 - I used this file (
https://opendev.org/openstack/tripleo-ansible/src/branch/master/tripleo_a...)
and I modified it to create my bonds and vlans and to map them to the
different networks.
5 - I created the networks-deployed-environment.yaml as mentioned like this
:
openstack overcloud network provision --output
networks-deployed-environment.yaml network_data.yaml
6 - Then I created the vip-deployed-environment.yaml using :
openstack overcloud network vip provision --output
~/templates/vip-deployed-environment.yaml ~/templates/vip_data.yaml
Am I correct till now? my conf files are attached
Then the documentation says, if you want to deploy use :
a - this command
openstack overcloud deploy --templates \
-n network_data.yaml \
-e networks-deployed-environment.yaml \
-e vip-deployed-environment.yaml \
-e network-environment-overrides.yaml
b - Or this command
openstack overcloud deploy --templates \
--networks-file network_data.yaml \
--vip-file vip_data.yaml \
--baremetal-deployment baremetal_deployment.yaml \
--network-config \
-e network-environment-overrides.yaml
What I don't understand is the difference between the two of them,
Does the first command mean : deploy the configuration on the already
deployed nodes (or already deployed overcloud)?
And does the second command mean : deploy the OS on the overcloud nodes
before deploying the overcloud itself?
PS : for the network part :
Each overcloud node has 6 nics :
- 2 nics will be bonded and used for the provisioning network. -> I didn't
know how to modify the bonds_vlans.j2 to create a bond on the ctplane
network.
- 2 nics will be bonded and used for the external, api and tenant networks.
- 2 nics will be bonded and used on the storage and the storage management
networks.
Regards.
Le jeu. 12 août 2021 à 03:04, Wan, Sam <Sam.Wan(a)dell.com> a écrit :
Hi Wodel Youchi,
You’re using the template for Victoria and prior releases according to
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu...
.
For wallaby, the hierarchy is like this:
*name*
Name of the network (mandatory)
*vip*
Enable creation of a virtual IP on this network
*subnets*
Dictionary’s, one or more subnet definition items keyed by the subnet name.
*subnet_name*
Name of the subnet
*ip_subnet*
IP/CIDR, e.g. *'10.0.0.0/24 <http://10.0.0.0/24>'*
*allocation_pools*
IP range list, e.g. *[{'start':'10.0.0.4',*
*'end':'10.0.0.250'}]*
*gateway_ip*
Gateway for the network
*vlan*
Vlan ID for this network. (supported in Queens and later)
And there’s an example in the doc
- *name*: CustomNetwork
*vip*: false
*name_lower*: custom_network
*subnets*:
*custom_network_subnet*:
*ip_subnet*: 172.16.6.0/24
*allocation_pools*:
- *start*: 172.16.6.4
- *end*: 172.16.6.250
*gateway_ip*: 172.16.6.1
Another example in the doc:
*subnets*:
*subnet_name_a*:
*ip_subnet*: 192.0.2.0/24
*allocation_pools*:
- *start*: 192.0.2.50
*end*: 192.0.2.99
*gateway_ip*: 192.0.2.1
*vlan*: 102
*subnet_name_b*:
*ip_subnet*: 198.51.100.0/24
*allocation_pools*:
- *start*: 198.51.100.50
*end*: 198.51.100.99
*gateway_ip*: 198.51.100.1
*vlan*: 101
So your network_data.yaml should be like this:
- name: Storage
vip: true
mtu: 1500
name_lower: storage
subnets:
storage_subnet:
ip_subnet: 10.100.7.0/24
allocation_pools: [{'start': '10.100.7.150', 'end':
'10.100.7.250'}
vlan: 1107
- name: StorageMgmt
vip: true
mtu: 1500
name_lower: storage_mgmt
subnets:
storagemgmt_subnet:
ip_subnet: 10.100.8.0/24
allocation_pools: [{'start': '10.100.8.150', 'end':
'10.100.8.250'}
vlan: 1108
- name: InternalApi
vip: true
mtu: 1500
name_lower: internal_api
subnets:
internalapi_subnet:
ip_subnet: 10.100.5.0/24
allocation_pools: [{'start': '10.100.5.150', 'end':
'10.100.5.250'}]
vlan: 1105
- name: Tenant
vip: false
mtu: 1500
name_lower: tenant
subnets:
tenant_subnet:
ip_subnet: 10.100.6.0/24
allocation_pools: [{'start': '10.100.6.150', 'end':
'10.100.6.250'}]
vlan: 1106
- name: External
vip: true
mtu: 1500
name_lower: external
subnets:
external_subnet:
ip_subnet: 10.0.1.0/24
allocation_pools: [{'start': '10.0.1.4', 'end':
'10.0.1.250'}]
gateway_ip: '10.0.1.1'
vlan: 2100
Thanks and regards
===============================
*sam.wan(a)dell.com <sam.wan(a)dell.com>*
*E-LAB*
*Dell **EMC** | Technical Operations IEO*
*Phone: **+86 (28) 82966713*
*From:* wodel youchi <wodel.youchi(a)gmail.com>
*Sent:* 2021年8月11日 20:42
*To:* Wan, Sam
*Cc:* users(a)lists.rdoproject.org
*Subject:* Re: [rdo-users] Error creating network isolation file
[EXTERNAL EMAIL]
Hi,
After re-reading the documentation, I found another document that explains
that there were new modifications in Wallaby
(https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/deplo...
[docs.openstack.org]
<https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid...
).
The document points to other links like this one
(https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu...
[docs.openstack.org]
<https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid...>),
it's really hard to follow and understand the documentation.
Regards.
[avast.com]
<https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema...
Virus-free. www.avast.com [avast.com]
<https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema...
Le mer. 11 août 2021 à 05:25, Wan, Sam <Sam.Wan(a)dell.com> a écrit :
Sorry I see you’ve paste the content of your network_data.yaml.
Please make changes to your network_data.yaml following the sample.
Thanks and regards
===============================
*sam.wan(a)dell.com <sam.wan(a)dell.com>*
*E-LAB*
*Dell **EMC** | Technical Operations IEO*
*Phone: **+86 (28) 82966713*
*From:* Wan, Sam
*Sent:* 2021年8月11日 12:23
*To:* 'wodel youchi'; users(a)lists.rdoproject.org
*Subject:* RE: [rdo-users] Error creating network isolation file
Hi Wodel Youchi,
The error is obvious.
*Additional properties are not allowed ('ip_subnet', 'enabled',
'allocation_pools', 'gateway_ip', 'vlan', 'ipv6_subnet',
'ipv6_allocation_pools', 'gateway_ipv6' were unexpected) \n\nFailed
schema
validation at :\n 'subnets' is a required property"*
Seems you’ve specified an unexpected ‘gateway_ipv6’ in ‘Management' network
Could you please share your ‘network_data.yaml' File?
There’s a link to network-data samples in the documentation you gave
however it’s broken.
Create and Edit network data YAML definition file¶ [docs.openstack.org]
<https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid...
Use the network-data-samples [opendev.org]
<https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem...
(broken) in tripleo-heat-templates [opendev.org]
<https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem...
as
a reference and customize the networks, IP addressing, VLANs, etc., as per
the cluster requirements.
But you can still find a sample in the source:
https://opendev.org/openstack/tripleo-heat-templates/src/branch/stable/wa...
[opendev.org]
<https://urldefense.com/v3/__https:/opendev.org/openstack/tripleo-heat-tem...
And there’s an example with gateway_ipv6, it should be in the subnets
property.
You might need to change your network-data.yaml following this sample.
Thanks and regards
===============================
*sam.wan(a)dell.com <sam.wan(a)dell.com>*
*E-LAB*
*Dell **EMC** | Technical Operations IEO*
*Phone: **+86 (28) 82966713*
*From:* users <users-bounces(a)lists.rdoproject.org> *On Behalf Of *wodel
youchi
*Sent:* 2021年8月5日 0:22
*To:* users(a)lists.rdoproject.org
*Subject:* [rdo-users] Error creating network isolation file
[EXTERNAL EMAIL]
Hi,
A newbie in Openstack, I am deploying an overcloud using the Wallaby
version.
I am using "container-tools 3.0 [e]"
I am trying to create the networks-deployed-environment.yaml file using :
*openstack overcloud network provision -o
/home/stack/templates/networks-deployed-environment.yaml
/home/stack/templates/network_data.yaml *
I am following this documentation :
https://docs.openstack.org/project-deploy-guide/tripleo-docs/latest/featu...
[docs.openstack.org]
<https://urldefense.com/v3/__https:/docs.openstack.org/project-deploy-guid...
But I am getting these errors on all networks defined in network_data.yaml:
*2021-08-04 17:13:54.071521 | 52540075-9baf-e063-4b37-00000000000e |
FATAL | Create/Update composable networks | localhost | item={'name':
'Management', 'enabled': True, 'vip': False,
'name_lower': 'management',
'vlan': 60, 'ip_subnet': '10.0.1.0/24 [10.0.1.0]
<https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI...;,
'allocation_pools': [{'start': '10.0.1.4', 'end':
'10.0.1.250'}],
'gateway_ip': '10.0.1.1', 'gateway_ipv6':
'fd00:fd00:fd00:6000::1',
'ipv6_subnet': 'fd00:fd00:fd00:6000::/64',
'ipv6_allocation_pools':
[{'start': 'fd00:fd00:fd00:6000::10', 'end':
'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}], 'mtu': 1500} |
error={"ansible_index_var": "idx", "ansible_loop_var":
"item", "changed":
false, "idx": 5, "item": {"allocation_pools":
[{"end": "10.0.1.250",
"start": "10.0.1.4"}], "enabled": true,
"gateway_ip": "10.0.1.1",
"gateway_ipv6": "fd00:fd00:fd00:6000::1", "ip_subnet":
"10.0.1.0/24
[10.0.1.0]
<https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI...;,
"ipv6_allocation_pools": [{"end":
"fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe", "start":
"fd00:fd00:fd00:6000::10"}], "ipv6_subnet":
"fd00:fd00:fd00:6000::/64",
"mtu": 1500, "name": "Management", "name_lower":
"management", "vip":
false, "vlan": 60}, "msg": "Failed schema validation at :\n
Additional
properties are not allowed ('ip_subnet', 'enabled',
'allocation_pools',
'gateway_ip', 'vlan', 'ipv6_subnet',
'ipv6_allocation_pools',
'gateway_ipv6' were unexpected)\n\nFailed schema validation at :\n
'subnets' is a required property"} ......*
Here is my network_data.yaml :
- name: Storage
vip: true
vlan: 1107
name_lower: storage
ip_subnet: '10.100.7.0/24 [10.100.7.0]
<https://urldefense.com/v3/__http:/10.100.7.0/24__;!!LpKI!xc4qNPJ0garbZ7l0...
'
allocation_pools: [{'start': '10.100.7.150', 'end':
'10.100.7.250'}]
mtu: 1500
- name: StorageMgmt
name_lower: storage_mgmt
vip: true
vlan: 1108
ip_subnet: '10.100.8.0/24 [10.100.8.0]
<https://urldefense.com/v3/__http:/10.100.8.0/24__;!!LpKI!xc4qNPJ0garbZ7l0...
'
allocation_pools: [{'start': '10.100.8.150', 'end':
'10.100.8.250'}]
mtu: 1500
- name: InternalApi
name_lower: internal_api
vip: true
vlan: 1105
ip_subnet: '10.100.5.0/24 [10.100.5.0]
<https://urldefense.com/v3/__http:/10.100.5.0/24__;!!LpKI!xc4qNPJ0garbZ7l0...
'
allocation_pools: [{'start': '10.100.5.150', 'end':
'10.100.5.250'}]
mtu: 1500
- name: Tenant
vip: false # Tenant network does not use VIPs
name_lower: tenant
vlan: 1106
ip_subnet: '10.100.6.0/24 [10.100.6.0]
<https://urldefense.com/v3/__http:/10.100.6.0/24__;!!LpKI!xc4qNPJ0garbZ7l0...
'
allocation_pools: [{'start': '10.100.6.150', 'end':
'10.100.6.250'}]
mtu: 1500
- name: External
vip: true
name_lower: external
vlan: 2100
ip_subnet: '10.0.1.0/24 [10.0.1.0]
<https://urldefense.com/v3/__http:/10.0.1.0/24__;!!LpKI!xc4qNPJ0garbZ7l0yI...
'
allocation_pools: [{'start': '10.0.1.4', 'end':
'10.0.1.250'}]
gateway_ip: '10.0.1.1'
mtu: 1500
What I am missing.
Regards.
[avast.com]
<https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema...
Virus-free. www.avast.com [avast.com]
<https://urldefense.com/v3/__https:/www.avast.com/sig-email?utm_medium=ema...
