11:07 a.m.
On 10/23/2017 04:11 PM, Jason E. Rist wrote:
Sorry for the slow/late reply on this. There is a bug right now for
just the TripleO-UI tunneling wherein the SSH tunnel doesn't get written
properly. https://launchpad.net/bugs/1722674 I put up a patch and so did
Sagi:
https://review.openstack.org/#/c/511143/1
Both work for me in solving the tunneling issue, but then there is
another issue wherein the TripleO-UI config doesn't get written properly
if the Quickstart setup is SSL, which it is by default (and honestly I
don't know how to disable). https://bugs.launchpad.net/tripleo/+bug/1725115
At the bottom of the /etc/systemd/system/ssh-tunnel.service tunnel there
is two lines that should help hitting horizon:
-L 0.0.0.0:8181:overcloud.localdomain:80 \
-L 0.0.0.0:8443:overcloud.localdomain:443
modify as necessary.
I already have those two lines in place, but still don't get forwarding.
From the config file, I have:
[Service]
ExecStart=/usr/bin/ssh -NT -o \
ServerAliveInterval=60 -o \
UserKnownHostsFile=/dev/null -o \
StrictHostKeyChecking=no -o \
ExitOnForwardFailure=no -i \
/home/stack/id_rsa_undercloud stack(a)192.168.23.33 \
-L 0.0.0.0:6385:https://192.168.24.2:6385 \
-L 0.0.0.0:5000:https://192.168.24.2:5000 \
-L 0.0.0.0:5050:https://192.168.24.2:5050 \
-L 0.0.0.0:8004:https://192.168.24.2:8004 \
-L 0.0.0.0:8080:https://192.168.24.2:8080 \
-L 0.0.0.0:9000:https://192.168.24.2:9000 \
-L 0.0.0.0:8989:https://192.168.24.2:8989 \
-L 0.0.0.0:3000:https://192.168.24.2:3000 \
-L 0.0.0.0:443:https://192.168.24.2:443 \
-L 0.0.0.0:13000:https://192.168.24.2:13000 \
-L 0.0.0.0:8181:overcloud.localdomain:80 \
-L 0.0.0.0:8443:overcloud.localdomain:443
12:14 p.m.
New subject: [rdo-list] tunneling to Horizon
On Tue, Oct 24, 2017 at 12:07 PM, James LaBarre <jlabarre(a)redhat.com> wrote:
On 10/23/2017 04:11 PM, Jason E. Rist wrote:
>
> Sorry for the slow/late reply on this. There is a bug right now for
> just the TripleO-UI tunneling wherein the SSH tunnel doesn't get written
> properly. https://launchpad.net/bugs/1722674 I put up a patch and so did
> Sagi:
>
> https://review.openstack.org/#/c/511143/1
>
> Both work for me in solving the tunneling issue, but then there is
> another issue wherein the TripleO-UI config doesn't get written properly
> if the Quickstart setup is SSL, which it is by default (and honestly I
> don't know how to disable). https://bugs.launchpad.net/
tripleo/+bug/1725115
>
> At the bottom of the /etc/systemd/system/ssh-tunnel.service tunnel there
> is two lines that should help hitting horizon:
> -L 0.0.0.0:8181:overcloud.localdomain:80 \
> -L 0.0.0.0:8443:overcloud.localdomain:443
> modify as necessary.
I already have those two lines in place, but still don't get forwarding.
From the config file, I have:
[Service]
ExecStart=/usr/bin/ssh -NT -o \
ServerAliveInterval=60 -o \
UserKnownHostsFile=/dev/null -o \
StrictHostKeyChecking=no -o \
ExitOnForwardFailure=no -i \
/home/stack/id_rsa_undercloud stack(a)192.168.23.33 \
-L 0.0.0.0:6385:https://192.168.24.2:6385 \
-L 0.0.0.0:5000:https://192.168.24.2:5000 \
-L 0.0.0.0:5050:https://192.168.24.2:5050 \
-L 0.0.0.0:8004:https://192.168.24.2:8004 \
-L 0.0.0.0:8080:https://192.168.24.2:8080 \
-L 0.0.0.0:9000:https://192.168.24.2:9000 \
-L 0.0.0.0:8989:https://192.168.24.2:8989 \
-L 0.0.0.0:3000:https://192.168.24.2:3000 \
-L 0.0.0.0:443:https://192.168.24.2:443 \
-L 0.0.0.0:13000:https://192.168.24.2:13000 \
-L 0.0.0.0:8181:overcloud.localdomain:80 \
-L 0.0.0.0:8443:overcloud.localdomain:443
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: rdo-list-unsubscribe(a)redhat.com
FYI.. I have confirmed this is working with the patches and dependencies in
https://bugs.launchpad.net/tripleo/+bug/1722674
The bug is updated with instructions on how to test w/ the unmerged code.
The doc is updated as well.
Thanks all!
9:37 a.m.
New subject: [rdo-list] tunneling to Horizon
On 10/24/2017 01:14 PM, Wesley Hayutin wrote:
FYI.. I have confirmed this is working with the patches and
dependencies in
https://bugs.launchpad.net/tripleo/+bug/1722674
The bug is updated with instructions on how to test w/ the unmerged code.
The doc is updated as well.
Thanks all!
Would I need to completely remove the existing .quickstart directory in
order to run this, or can I update an existing install? (it didn't seen
to work with an existing config, but I might have done it wrong)
3:05 p.m.
New subject: [rdo-list] tunneling to Horizon
On Wed, Oct 25, 2017 at 10:37 AM, James LaBarre <jlabarre(a)redhat.com> wrote:
On 10/24/2017 01:14 PM, Wesley Hayutin wrote:
FYI.. I have confirmed this is working with the patches and dependencies in
https://bugs.launchpad.net/tripleo/+bug/1722674
The bug is updated with instructions on how to test w/ the unmerged code.
The doc is updated as well.
Thanks all!
Would I need to completely remove the existing .quickstart directory in
order to run this, or can I update an existing install? (it didn't seen to
work with an existing config, but I might have done it wrong)
If you want to update your .quickstart directory vs blow it away you can
source ~/.quickstart/bin/activate and execute python setup.py install from
tq and tqe to get the latest changes into the right locations.
10:01 a.m.
New subject: [rdo-list] tunneling to Horizon
On 10/26/2017 04:05 PM, Wesley Hayutin wrote:
On Wed, Oct 25, 2017 at 10:37 AM, James LaBarre <jlabarre(a)redhat.com
<mailto:jlabarre@redhat.com>> wrote:
Would I need to completely remove the existing .quickstart
directory in order to run this, or can I update an existing
install? (it didn't seen to work with an existing config, but I
might have done it wrong)
If you want to update your .quickstart directory vs blow it away you
can source ~/.quickstart/bin/activate and execute python setup.py
install from tq and tqe to get the latest changes into the right
locations.
I've been trying this, but the re-run of quickstart.sh fails a short way
into the process. Once O get to a fetch-images task, it quits the process.
===================================
TASK [fetch-images : Get image expected checksum]
******************************
task path: /root/tripleo-quickstart/roles/fetch-images/tasks/fetch.yml:66
Monday 30 October 2017 10:28:18 -0400 (0:00:00.053) 0:01:01.036
********
fatal: [127.0.0.2]: FAILED! => {"changed": true, "cmd":
["curl", "-sfL",
"http://images.rdoproject.org/pike/rdo_trunk/current-tripleo/stable/undercloud.qcow2.md5"],
"delta": "0:00:00.338819", "end": "2017-10-30
10:28:19.249427",
"failed": true, "rc": 22, "start": "2017-10-30
10:28:18.910608",
"stderr": "", "stdout": "",
"stdout_lines": [], "warnings": ["Consider
using get_url or uri module rather than running curl"]}
PLAY RECAP
*********************************************************************
127.0.0.2 : ok=84 changed=25 unreachable=0
failed=1
localhost : ok=11 changed=4 unreachable=0
failed=0
===================================
At this point the only thing I can do is reprovision the system (load a
fresh OS image and start the whole install again). Have been trying to
find a way of avoiding that, since it takes a couple hours to run
quickstart again (on top of bringing the OS to a ready state first).
As it is, have yet to make Horizon accessible. I expect it's some
simple setup switch I'm missing (it'll be a "duh" moment when I figure
that one out).
8:38 a.m.
New subject: [rdo-list] tunneling to Horizon
On 10/26/2017 04:05 PM, Wesley Hayutin wrote:
On Wed, Oct 25, 2017 at 10:37 AM, James LaBarre <jlabarre(a)redhat.com
<mailto:jlabarre@redhat.com>> wrote:
On 10/24/2017 01:14 PM, Wesley Hayutin wrote:
>
> FYI.. I have confirmed this is working with the patches and
> dependencies in
> https://bugs.launchpad.net/tripleo/+bug/1722674
> <https://bugs.launchpad.net/tripleo/+bug/1722674>
>
> The bug is updated with instructions on how to test w/ the
> unmerged code.
> The doc is updated as well.
>
> Thanks all!
Would I need to completely remove the existing .quickstart
directory in order to run this, or can I update an existing
install? (it didn't seen to work with an existing config, but I
might have done it wrong)
If you want to update your .quickstart directory vs blow it away you
can source ~/.quickstart/bin/activate and execute python setup.py
install from tq and tqe to get the latest changes into the right
locations.
With enough juggling (and figuring how to pull in patches) I can finally
access Horizon, both from the HW host that the quickstart is installed
on, as well as my laptop.
I would note, though, I connected through HW_host:8443. I recall there
was also supposed to be a redirect to ports 8080 or 8181 (still trying
to find which went where, my memory never was what it used to be). 8443
works for me right now, I'll see if any other errors come up later.
10:17 a.m.
New subject: [rdo-list] tunneling to Horizon
On 10/31/2017 07:38 AM, James LaBarre wrote:
On 10/26/2017 04:05 PM, Wesley Hayutin wrote:
>
>
> On Wed, Oct 25, 2017 at 10:37 AM, James LaBarre <jlabarre(a)redhat.com
> <mailto:jlabarre@redhat.com>> wrote:
>
> On 10/24/2017 01:14 PM, Wesley Hayutin wrote:
>>
>> FYI.. I have confirmed this is working with the patches and
>> dependencies in
>> https://bugs.launchpad.net/tripleo/+bug/1722674
>> <https://bugs.launchpad.net/tripleo/+bug/1722674>
>>
>> The bug is updated with instructions on how to test w/ the
>> unmerged code.
>> The doc is updated as well.
>>
>> Thanks all!
>
> Would I need to completely remove the existing .quickstart
> directory in order to run this, or can I update an existing
> install? (it didn't seen to work with an existing config, but I
> might have done it wrong)
>
>
> If you want to update your .quickstart directory vs blow it away you
> can source ~/.quickstart/bin/activate and execute python setup.py
> install from tq and tqe to get the latest changes into the right
> locations.
With enough juggling (and figuring how to pull in patches) I can finally
access Horizon, both from the HW host that the quickstart is installed
on, as well as my laptop.
I would note, though, I connected through HW_host:8443. I recall there
was also supposed to be a redirect to ports 8080 or 8181 (still trying
to find which went where, my memory never was what it used to be). 8443
works for me right now, I'll see if any other errors come up later.
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: rdo-list-unsubscribe(a)redhat.com
8181 is where the insecure listen is for Horizon if that's not set up to
listen, I don't think it will work.
-J
2376
days inactive
2383
days old
6 comments
3 participants
participants (3)
-
James LaBarre -
Jason E. Rist -
Wesley Hayutin