Re: [rdo-users] UnderCloud Failed for Stein

Hi, What version of CentOS are you using for the underlying OS in the undercloud and how did you deploy it? Best regards, Alfredo On Thu, Jun 20, 2019 at 10:47 AM Pradeep Antil <pradeepantil(a)gmail.com&gt; wrote: > Hi Folks, > > I am trying to install undercloud on CentOS 7 VirtualBox VM. Two Nics are > assigned to VM, first NIC is used for Provisioning N/w(192.168.56.0/24) > and second is used for internet (NAT - 10.0.3.15) > > When i try to install undercloud using below command, getting the > following error, > > Any idea and suggestion to resolve the error. > > [stack@undercloud ~]$ openstack undercloud install > > TASK [Restart Keepalived container] > ******************************************************************************************* > fatal: [undercloud]: FAILED! => {"changed": true, "cmd": "podman restart > keepalived", "delta": "0:00:00.090226", "end": "2019-06-20 > 03:50:58.583423", "msg": "non-zero return code", "rc": 125, "start": > "2019-06-20 03:50:58.493197", "stderr": "Error: error creating libpod > runtime: kernel does not support overlay fs: overlay: the backing xfs > filesystem is formatted without d_type support, which leads to incorrect > behavior. Reformat the filesystem with ftype=1 to enable d_type support. > Running without d_type is not supported.: driver not supported", > "stderr_lines": ["Error: error creating libpod runtime: kernel does not > support overlay fs: overlay: the backing xfs filesystem is formatted > without d_type support, which leads to incorrect behavior. Reformat the > filesystem with ftype=1 to enable d_type support. Running without d_type is > not supported.: driver not supported"], "stdout": "", "stdout_lines": []} > ...ignoring > > [stack@undercloud ~]$ df -Th > Filesystem Type Size Used Avail Use% Mounted on > /dev/mapper/centos-root xfs 31G 2.3G 29G 8% / > devtmpfs devtmpfs 3.9G 0 3.9G 0% /dev > tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm > tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run > tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup > /dev/sda1 xfs 497M 141M 356M 29% /boot > tmpfs tmpfs 782M 0 782M 0% /run/user/0 > tmpfs tmpfs 500M 36M 465M 8% > /var/log/heat-launcher > [stack@undercloud ~]$ free -h > total used free shared buff/cache > available > Mem: 7.6G 232M 5.7G 44M 1.7G > 7.0G > Swap: 3.5G 0B 3.5G > [stack@undercloud ~]$ > > [stack@undercloud ~]$ cat ~/undercloud.conf > # Config generated by undercloud wizard > # Use these values in undercloud.conf > [DEFAULT] > undercloud_hostname = undercloud.localdomain > local_interface = enp0s3 > local_mtu = 1500 > local_ip = 192.168.56.2/24 > undercloud_public_host = 192.168.56.3 > undercloud_admin_host = 192.168.56.4 > undercloud_service_certificate = > generate_service_certificate = True > scheduler_max_attempts = 10 > > # Deprecated names for compatibility with older releases > discovery_iprange = 192.168.56.16,192.168.56.20 > undercloud_public_vip = 192.168.56.3 > undercloud_admin_vip = 192.168.56.4 > network_cidr = 192.168.56.0/24 > dhcp_start = 192.168.56.6 > dhcp_end = 192.168.56.15 > inspection_iprange = 192.168.56.16,192.168.56.20 > network_gateway = 192.168.56.1 > #masquerade_network = 192.168.56.0/24 > # End of deprecated names > > [ctlplane-subnet] > cidr = 192.168.56.0/24 > gateway = 192.168.56.1 > dhcp_start = 192.168.56.6 > dhcp_end = 192.168.56.15 > inspection_iprange = 192.168.56.16,192.168.56.20 > #masquerade = true > > [stack@undercloud ~]$ > > -- > Best Regards > Pradeep Kumar > _______________________________________________ > users mailing list > users(a)lists.rdoproject.org > http://lists.rdoproject.org/mailman/listinfo/users > > To unsubscribe: users-unsubscribe(a)lists.rdoproject.org > _______________________________________________ users mailing list users(a)lists.rdoproject.org http://lists.rdoproject.org/mailman/listinfo/users To unsubscribe: users-unsubscribe(a)lists.rdoproject.org