7:31 a.m.
I have used older images, with a bit less sw, but still, with my
modifications, and it works.
drwxrwxr-x. 3 stack stack 27 Dec 22 15:51 ironic-python-agent.d
-rw-rw-r--. 1 stack stack 514499100 Dec 22 19:07
ironic-python-agent.initramfs
-rwxr-xr-x. 1 stack stack 9514120 Dec 22 15:52
ironic-python-agent.kernel
-rw-rw-r--. 1 stack stack 511381 Dec 22 15:52 ironic-python-agent.log
drwxrwxr-x. 3 stack stack 27 Dec 22 15:39 overcloud-full.d
-rw-r--r--. 1 root root 62170282 Dec 22 15:39 overcloud-full.initrd
-rw-rw-r--. 1 stack stack 810492 Dec 22 15:43 overcloud-full.log
-rw-r--r--. 1 stack stack 1199177728 Dec 22 19:09 overcloud-full.qcow2
-rwxr-xr-x. 1 root root 9514120 Dec 22 15:39 overcloud-full.vmlinuz
after this date, it does not work...
On Sat, 23 Jan 2021 at 11:55, Ruslanas Gžibovskis <ruslanas(a)lpic.lt> wrote:
hmmmm, I will try to catch it.
I have setup rsyslog to send logs to my undercloud...
This is what I received from remote side.
it's rebooting after unsuccessful boot, so I cannot get final version in
one file...
On Sat, 23 Jan 2021 at 00:46, Julia Kreger <juliaashleykreger(a)gmail.com>
wrote:
> Umm, wow. That is a new one.
>
> Any chance you can post or supply the entire ramdisk log that would
> have been uploaded to ironic?
>
> On Fri, Jan 22, 2021 at 3:02 PM Ruslanas Gžibovskis <ruslanas(a)lpic.lt>
> wrote:
> >
> > Hi all,
> >
> > I am trying to build some cloud again and failing with [1]. I think
> this is a most critical line. It fails during GRUB2 deployment on overcloud
> image, I believe main error message is: mount: only root can do that. I
> used the following steps to create image:
> >
> > cp -ar /etc/yum.repos.d repos
> > # enable: repos/CentOS-HA.repo
> > sed -i "s/enabled=0/enabled=1/g"
> repos/CentOS-Linux-HighAvailability.repo
> > sed -i "s/gpgcheck=1/gpgcheck=0/g" repos/*repo
> > export DIB_YUM_REPO_CONF="$(ls $(pwd)/repos/*repo)"
> > export STABLE_RELEASE="ussuri"
> > source /home/stack/stackrc
> > mkdir /home/stack/images
> > cd /home/stack/images
> > openstack overcloud image build --config-file
> /home/stack/overcloud-images-python3.yaml
> > openstack overcloud image upload --update-existing
> > # openstack overcloud node configure --all-manageable
> >
> > overcloud-images-python3.yaml file content can be found here [2], just
> added additional packages, such as tcpdump, iperf, iptraf and so on...
> > And steps from link [3] to set root pass to troubleshoot if needed.
> >
> > any thoughts? Maybe there were some changes recently (from 22 of
> December) PRevious images from there. Thank you for your thoughts and
> attention.
> >
> > [1] http://paste.openstack.org/show/GDYriAXxQniZTPQGJGbH/
> > [2] http://paste.openstack.org/show/2tkVFdwSZ0QMjoJKmOrm/
> > [3]
>
https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/...
> >
> >
> > --
> > Ruslanas Gžibovskis
> > +370 6030 7030
>
--
Ruslanas Gžibovskis
+370 6030 7030
--
Ruslanas Gžibovskis
+370 6030 7030