3:58 p.m.
Thank you for responding.
I installed Stein.
Packstack version says 14.0.0, but I'm not sure how to determine RDO
version.
Here's the output of ip a:
[root@shp-vmc-00-man ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
4: ens2f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovs-system state UP group default qlen 1000
link/ether 3c:fd:fe:c5:82:60 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3efd:feff:fec5:8260/64 scope link
valid_lft forever preferred_lft forever
5: eno3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether f4:03:43:43:c1:1e brd ff:ff:ff:ff:ff:ff
6: ens2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
link/ether 3c:fd:fe:c5:82:61 brd ff:ff:ff:ff:ff:ff
inet 10.57.37.123/24 brd 10.57.37.255 scope global ens2f1
valid_lft forever preferred_lft forever
inet6 fe80::3efd:feff:fec5:8261/64 scope link
valid_lft forever preferred_lft forever
7: eno4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether f4:03:43:43:c1:1f brd ff:ff:ff:ff:ff:ff
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
inet 10.57.38.123/24 brd 10.57.38.255 scope global bond0
valid_lft forever preferred_lft forever
inet6 fe80::f603:43ff:fe43:c11c/64 scope link
valid_lft forever preferred_lft forever
11: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether b6:0f:96:16:31:4e brd ff:ff:ff:ff:ff:ff
13: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 6e:e9:0e:c6:42:48 brd ff:ff:ff:ff:ff:ff
14: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc
noqueue master ovs-system state UNKNOWN group default qlen 1000
link/ether d6:7e:75:80:f9:ce brd ff:ff:ff:ff:ff:ff
inet6 fe80::d47e:75ff:fe80:f9ce/64 scope link
valid_lft forever preferred_lft forever
17: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN group default qlen 1000
link/ether 3c:fd:fe:c5:82:60 brd ff:ff:ff:ff:ff:ff
inet 10.57.36.217/24 brd 10.57.36.255 scope global br-ex
valid_lft forever preferred_lft forever
inet6 fe80::6ccc:80ff:fe30:b541/64 scope link
valid_lft forever preferred_lft forever
Best Regards,
Todd
On Thu, Jul 11, 2019 at 7:35 AM Alfredo Moralejo Alonso <amoralej(a)redhat.com>
wrote:
Hi,
What version of RDO and packstack are you using?, could you provide the
output of command "ip a"?
Best regards,
Alfredo
On Mon, Jul 8, 2019 at 11:43 PM Todd Leishman <toddleish(a)gmail.com> wrote:
> Hello,
> I am attempting to use Packstack with an answer file to install Openstack
> on two nodes -- a controller/network node and a compute node. I installed
> Packstack new today.
>
> When I run packstack with the answer file, it gets to the step:
> "Preparing Neutron API entries" and then errors out. The error reads:
> ERROR : "Couldn't detect ipaddress of interface ens2f1 on node
10.57.38.123"
>
> The controller node management IP is 10.57.38.123 (on bond0). I am
> trying to use ens2f1 for the OVN tunnel. It's IP address is 10.57.37.123.
>
> Attached are my answer file and the setup log with failure.
>
> Any ideas on what could be wrong?
>
> Thanks,
>
> --
>
> Todd Leishman
>
> toddleish(a)gmail.com
> _______________________________________________
> users mailing list
> users(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/users
>
> To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
>
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
--
Todd Leishman
toddleish(a)gmail.com