1:05 p.m.
On Wed, Nov 15, 2017 at 2:41 PM, Samuel Monderer <
smonderer(a)vasonanetworks.com> wrote:
Hi,
I managed to deploy a compute node with ovs-dpdk using two NICs. The first
for the provisioning network and control plane, the other NIC is used
tenant network over ovs-dpdk.
I then tried to use only a single nic for provisioning and ovs-dpdk.
I used the nic configuration below for the compute nodes running ovs-dpdk
but encountered two problems.
First the tenant network was working (wasn't able to get DHCP running and
even when I manually configured it wasn't able to reach the router)
Second the default route on control plane is not set even though it is
configured in /etc/sysconfig/network-scripts/route-br-ex
Samuel
OsNetConfigImpl:
type: OS::Heat::StructuredConfig
properties:
group: os-apply-config
config:
os_net_config:
network_config:
-
type: ovs_user_bridge
name: {get_input: bridge_name}
use_dhcp: false
dns_servers: {get_param: DnsServers}
addresses:
-
ip_netmask:
list_join:
- '/'
- - {get_param: ControlPlaneIp}
- {get_param: ControlPlaneSubnetCidr}
routes:
-
ip_netmask: 169.254.169.254/32
next_hop: {get_param: EC2MetadataIp}
-
default: true
next_hop: {get_param: ControlPlaneDefaultRoute}
members:
-
type: ovs_dpdk_port
name: dpdk0
members:
-
type: interface
name: nic1
-
type: vlan
vlan_id: {get_param: InternalApiNetworkVlanID}
addresses:
-
ip_netmask: {get_param: InternalApiIpSubnet}
-
type: vlan
vlan_id: {get_param: TenantNetworkVlanID}
addresses:
-
ip_netmask: {get_param: TenantIpSubnet}
_______________________________________________
users mailing list
users(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/users
To unsubscribe: users-unsubscribe(a)lists.rdoproject.org
Samuel,
Can you attach an unmodified version of this NIC config, rather than
copy/paste into the email?
I think you have an issue here:
members:
-
type: ovs_dpdk_port
name: dpdk0
members:
-
type: interface
name: nic1
It appears that you have the ovs_dpdk_port as a member of the user bridge,
but then you have the NIC and the VLANs as members of the ovs_dpdk_port,
but the VLANs should be members of the bridge, not the ovs_dpdk_port.
But that might not be the case, which is why I would like to see the
original unmodifed NIC config.
--
Dan Sneddon | Senior Principal OpenStack Engineer
dsneddon(a)redhat.com | redhat.com/openstack
dsneddon:irc | @dxs:twitter