Re: [Rdo-list] Single Node Openstack

Usually this is because you forgot to allow ssh and icmp in the security group rules. It's easiest to configure if you use the GUI. Hope it helps. -- Udi. ----- Original Message ----- From: "David Krovich" <David.Krovich(a)mail.wvu.edu&gt; To: rdo-list(a)redhat.com Sent: Wednesday, December 24, 2014 2:59:22 AM Subject: Re: [Rdo-list] Single Node Openstack Adding more information. ONBOOT=yes[root@localhost ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p5p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:22:41:28:14:20 brd ff:ff:ff:ff:ff:ff inet 192.168.5.151/24 brd 192.168.5.255 scope global dynamic p5p1 valid_lft 85871sec preferred_lft 85871sec inet6 fe80::222:41ff:fe28:1420/64 scope link valid_lft forever preferred_lft forever 3: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 22:4a:7f:81:49:15 brd ff:ff:ff:ff:ff:ff 4: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 32:1a:96:7a:7e:4a brd ff:ff:ff:ff:ff:ff inet 192.168.5.151/24 brd 192.168.5.255 scope global br-ex valid_lft forever preferred_lft forever inet6 fe80::301a:96ff:fe7a:7e4a/64 scope link valid_lft forever preferred_lft forever 8: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 32:99:19:54:f9:40 brd ff:ff:ff:ff:ff:ff 10: br-tun: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 76:49:ac:a6:ce:4f brd ff:ff:ff:ff:ff:ff /etc/sysconfig/network-scripts/ifcfg-br-ex [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-br-ex DEVICE=br-ex DEVICETYPE=ovs TYPE=OVSBridge BOOTPROTO=static IPADDR=192.168.5.151 NETMASK=255.255.255.0 ONBOOT=yes [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-p5p1 TYPE="OVSPort" DEVICETYPE="ovs" OVS_BRIDGE="br-ex" DEFROUTE="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_PEERDNS="yes" IPV6_PEERROUTES="yes" IPV6_FAILURE_FATAL="no" NAME="p5p1" UUID="70997a7b-a01c-48a6-b961-b11304839108" ONBOOT="yes" HWADDR="00:22:41:28:14:20" PEERDNS="yes" PEERROUTES="yes" Ran the following: [root@localhost ~]# . keystonerc_admin [root@localhost ~(keystone_admin)]# neutron router-gateway-clear router1 Removed gateway from router router1 [root@localhost ~(keystone_admin)]# neutron subnet-delete public_subnet Deleted subnet: public_subnet [root@localhost ~(keystone_admin)]# neutron subnet-create --name public_subnet --enable_dhcp=False --allocation-pool=start=192.168.5.10,end=192.168.5.20 --gateway=192.168.5.1 public 192.168.5.0/24 Created a new subnet: +-------------------+--------------------------------------------------+ | Field | Value | +-------------------+--------------------------------------------------+ | allocation_pools | {"start": "192.168.5.10", "end": "192.168.5.20"} | | cidr | 192.168.5.0/24 | | dns_nameservers | | | enable_dhcp | False | | gateway_ip | 192.168.5.1 | | host_routes | | | id | 8f11b060-73a9-4b43-a3cc-be192436102c | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | public_subnet | | network_id | 7fbe63c2-0745-45c3-9f00-622ee0eb223b | | tenant_id | 636f926081a345fc93ca12fb5401ffe5 | +-------------------+--------------------------------------------------+ [root@localhost ~(keystone_admin)]# ​ From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on behalf of David Krovich <David.Krovich(a)mail.wvu.edu&gt; Sent: Tuesday, December 23, 2014 3:56 PM To: rdo-list(a)redhat.com Subject: [Rdo-list] Single Node Openstack Hi, I'm trying to learn about how to setup and configure OpenStack. I've got a laptop that I want to use a test machine to run a single OpenStack node with instances appearing on the same network as the node itself. I'm trying to follow the instructions from this web site. https://openstack.redhat.com/Neutron_with_existing_external_network I'm running Fedora 20 on this laptop. My network range is 192.168.5.0/24. First question, does anyone have a similar setup? Fedora 20, single node, instances on the same network? I can get openstack installed via packstack and everything appears to work except that I can't seem to talk to the instances over the network. At this point I'm stuck and could use some advise on where to look further. Thanks. -Dave _______________________________________________ Rdo-list mailing list Rdo-list(a)redhat.com https://www.redhat.com/mailman/listinfo/rdo-list