8:42 p.m.
so i am experimenting with staypuft trying to learn how to install it
i have set up a VM with the latest centos6 and then added the foreman
repository and installed the staypuft-installer
it then fails but doesnt give me an error output - there is nothing in the
logs. whatsoever i have are my inputs. pls advise on how to get staypuft
installed
yum -y install
http://yum.theforeman.org/releases/latest/el6/x86_64/foreman-release.rpm
yum -y install foreman-installer-staypuft
staypuft-installer --foreman-plugin-discovery-install-images=true
ifconfig #confirm ip
vi /etc/hosts #make an entry for this host
hostname -f #verify
staypuft-installer --foreman-plugin-discovery-install-images=true
cat /var/log/foreman-installer/foreman-installer.log |grep -i error
___
[root@staypuft ~]# hostname -f
staypuft.marafa.vm
[root@staypuft ~]# staypuft-installer
--foreman-plugin-discovery-install-images=true
Networking setup:
Network interface: 'eth0'
IP address: '10.0.1.2'
Network mask: '255.255.255.0'
Network address: '10.0.1.0'
Host Gateway: '10.0.1.1'
DHCP range start: '10.0.1.3'
DHCP range end: '10.0.1.254'
DHCP Gateway: '10.0.1.2'
DNS forwarder: '8.8.8.7'
Domain: 'marafa.vm'
Foreman URL: 'https://staypuft.marafa.vm'
NTP sync host: '1.centos.pool.ntp.org'
Timezone: 'UTC'
Configure networking on this machine: ✓
Configure firewall on this machine: ✓
The installer can configure the networking and firewall rules on this
machine with the above configuration. Default values are populated from the
this machine's existing networking configuration.
If you DO NOT want to configure networking please set 'Configure networking
on this machine' to No before proceeding. Do this by selecting option 'Do
not configure networking' from the list below.
How would you like to proceed?:
1. Proceed with the above values
2. Change Network interface
3. Change IP address
4. Change Network mask
5. Change Network address
6. Change Host Gateway
7. Change DHCP range start
8. Change DHCP range end
9. Change DHCP Gateway
10. Change DNS forwarder
11. Change Domain
12. Change Foreman URL
13. Change NTP sync host
14. Change Timezone
15. Do not configure networking
16. Do not configure firewall
17. Cancel Installation
1
Configure client authentication
SSH public key: ''
Root password: '*******************************************'
Please set a default root password for newly provisioned machines. If you
choose not to set a password, it will be generated randomly. The password
must be a minimum of 8 characters. You can also set a public ssh key which
will be deployed to newly provisioned machines.
How would you like to proceed?:
1. Proceed with the above values
2. Change SSH public key
3. Change Root password
4. Toggle Root password visibility
3
new value for root password
********
enter new root password again to confirm
********
Configure client authentication
SSH public key: ''
Root password: '********'
Please set a default root password for newly provisioned machines. If you
choose not to set a password, it will be generated randomly. The password
must be a minimum of 8 characters. You can also set a public ssh key which
will be deployed to newly provisioned machines.
How would you like to proceed?:
1. Proceed with the above values
2. Change SSH public key
3. Change Root password
4. Toggle Root password visibility
4
Configure client authentication
SSH public key: ''
Root password: 'password'
Please set a default root password for newly provisioned machines. If you
choose not to set a password, it will be generated randomly. The password
must be a minimum of 8 characters. You can also set a public ssh key which
will be deployed to newly provisioned machines.
How would you like to proceed?:
1. Proceed with the above values
2. Change SSH public key
3. Change Root password
4. Toggle Root password visibility
1
Starting networking setup
Networking setup has finished
Preparing installation Done
Not running provisioning configuration since installation encountered
errors, exit code was 1
Something went wrong! Check the log for ERROR-level output
* Foreman is running at https://staypuft.marafa.vm
Initial credentials are admin / ZZVBfQ3WLAwnpHJH
* Foreman Proxy is running at https://staypuft.marafa.vm:8443
* Puppetmaster is running at port 8140
The full log is at /var/log/foreman-installer/foreman-installer.log
Something went wrong! Check the log for ERROR-level output
The full log is at /var/log/foreman-installer/foreman-installer.log
[root@staypuft ~]# cat /var/log/foreman-installer/foreman-installer.log
|grep -i error
[root@staypuft ~]#
--
<https://candidate.peoplecert.org/ReportsLink.aspx?argType=1&id=13D642...
*805010942448935*
<https://www.redhat.com/wapps/training/certification/verify.html?certNumbe...
*GR750055912MA*
<https://candidate.peoplecert.org/ReportsLink.aspx?argType=1&id=13D642...
*Link to me on LinkedIn <http://www.linkedin.com/in/mohammedarafa>*