[Rdo-list] Permission denied on console.log after failed migration
by Elías David
Hello, I've an issue, I started a migration of an instance (not live if
relevant), the instance was in a vmserver2 and it was supposed to start on
vmserver4, there it failed with the message "libvirtError Cannot access
/nova/instances/instance_uuid/console.log Access denied"
Both servers were installed with packstack, the permission on the file is
root:root 660 as it was on the original server.
Selinux is not used, nova user is capable of passworless ssh between servers
Libvirtd runs as root, operating system is CentOS 6.5, openstack version is
icehouse, I've checked permissions and logs and all I have is this
permission denied message
Dies anyone have experienced something similar?
Thanks in advance!
9 years, 7 months
[Rdo-list] Updated Cloud Images to test
by Karanbir Singh
Hi guys,
forwarding here as well, will track feedback here on the rdo list, so
you dont need to cross post to the centos-devel list
-------- Original Message --------
Subject: [CentOS-devel] Updated Cloud Images to test
Date: Tue, 16 Sep 2014 22:20:27 +0100
From: Karanbir Singh <mail-lists(a)karan.org>
Reply-To: The CentOS developers mailing list. <centos-devel(a)centos.org>
To: The CentOS developers mailing list. <centos-devel(a)centos.org>
hi folks,
24ff09989ed8e80bbf3ba7b85e1e00b024645b2b5f1bf65b22061bbeccbd2922
CentOS-7-x86_64-GenericCloud-20140916_01.qcow2
c2a30027bafd9042508dfe4ef46c2a9189bbe914e716721268b9812d32174420
CentOS-7-x86_64-GenericCloud-20140916_01.raw
6a31fa7ad8c5b10d4c58e2dec47bf5971bb21ec730b830d9b6201eada1c9200c
CentOS-7-x86_64-GenericCloud-GA-7.0.1406_01.qcow2
52a27e9b1fbd55982a6e9221c115c3eac436bda3aa020b7882d03f32a9da04a6
CentOS-7-x86_64-GenericCloud-GA-7.0.1406_01.raw
are now at http://cloud.centos.org/centos/7/devel/
Please test and provide feedback, these should now be pretty close to
release grade.
Main highlight here is that all content is .centos.org hosted, signed
and we now include cloud-utils-growpart.
Regards,
--
Karanbir Singh
+44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh
GnuPG Key : http://www.karan.org/publickey.asc
_______________________________________________
CentOS-devel mailing list
CentOS-devel(a)centos.org
http://lists.centos.org/mailman/listinfo/centos-devel
9 years, 7 months
[Rdo-list] Error: sysctl -p /etc/sysctl.conf returned 255 instead of one of [0]
by foss geek
Dear All,
I trying to install openstack with vCenter on CentOS 6.5.
I am getting below error:
*SequenceError: Error appeared during Puppet run: 10.10.2.2_neutron.pp*
*Error: sysctl -p /etc/sysctl.conf returned 255 instead of one of [0]*
*You will find full trace in log
/var/tmp/packstack/20140916-191749-_fyhX5/manifests/10.10.2.2_neutron.pp.log*
*2014-09-16 19:21:57::INFO::shell::81::root:: [10.10.2.2] Executing script:*
*rm -rf /var/tmp/packstack/9d8561bfd26c44b392473e9f0e601bbb*
Here is detailed error message and answer file:
2014-09-16 19:21:57::INFO::shell::81::root:: [10.10.2.2] Executing script:
rm -rf /var/tmp/packstack/9d8561bfd26c44b392473e9f0e601bbb
[root@vCenter-OS-Dev ~]# tail -n 30
/var/tmp/packstack/20140916-191749-_fyhX5/openstack-setup.log
rpm -q --whatprovides puppet || yum install -y puppet
rpm -q --whatprovides openssh-clients || yum install -y openssh-clients
rpm -q --whatprovides tar || yum install -y tar
rpm -q --whatprovides nc || yum install -y nc
rpm -q --whatprovides rubygem-json || yum install -y rubygem-json
2014-09-16 19:18:13::INFO::shell::81::root:: [localhost] Executing script:
cd /usr/lib/python2.6/site-packages/packstack/puppet
cd /var/tmp/packstack/20140916-191749-_fyhX5/manifests
tar --dereference -cpzf - ../manifests | ssh -o StrictHostKeyChecking=no -o
UserKnownHostsFile=/dev/null root(a)10.10.2.2 tar -C
/var/tmp/packstack/9d8561bfd26c44b392473e9f0e601bbb -xpzf -
cd /usr/share/openstack-puppet/modules
tar --dereference -cpzf - apache ceilometer certmonger cinder concat
firewall glance heat horizon inifile keystone memcached mongodb mysql
neutron nova nssdb openstack packstack qpid rabbitmq remote rsync ssh
stdlib swift sysctl tempest vcsrepo vlan vswitch xinetd | ssh -o
StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null root(a)10.10.2.2 tar
-C /var/tmp/packstack/9d8561bfd26c44b392473e9f0e601bbb/modules -xpzf -
2014-09-16 19:21:57::ERROR::run_setup::921::root:: Traceback (most recent
call last):
File "/usr/lib/python2.6/site-packages/packstack/installer/run_setup.py",
line 916, in main
_main(confFile)
File "/usr/lib/python2.6/site-packages/packstack/installer/run_setup.py",
line 605, in _main
runSequences()
File "/usr/lib/python2.6/site-packages/packstack/installer/run_setup.py",
line 584, in runSequences
controller.runAllSequences()
File
"/usr/lib/python2.6/site-packages/packstack/installer/setup_controller.py",
line 68, in runAllSequences
sequence.run(config=self.CONF, messages=self.MESSAGES)
File
"/usr/lib/python2.6/site-packages/packstack/installer/core/sequences.py",
line 98, in run
step.run(config=config, messages=messages)
File
"/usr/lib/python2.6/site-packages/packstack/installer/core/sequences.py",
line 44, in run
raise SequenceError(str(ex))
SequenceError: Error appeared during Puppet run: 10.10.2.2_neutron.pp
Error: sysctl -p /etc/sysctl.conf returned 255 instead of one of [0]
You will find full trace in log
/var/tmp/packstack/20140916-191749-_fyhX5/manifests/10.10.2.2_neutron.pp.log
2014-09-16 19:21:57::INFO::shell::81::root:: [10.10.2.2] Executing script:
rm -rf /var/tmp/packstack/9d8561bfd26c44b392473e9f0e601bbb
# cat all-in-one.conf
[general]
# Path to a Public key to install on servers. If a usable key has not
# been installed on the remote servers the user will be prompted for a
# password and this key will be installed so the password will not be
# required again
CONFIG_SSH_KEY=
# Set to 'y' if you would like Packstack to install MySQL
CONFIG_MYSQL_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack Image
# Service (Glance)
CONFIG_GLANCE_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack Block
# Storage (Cinder)
CONFIG_CINDER_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack Compute
# (Nova)
CONFIG_NOVA_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack
# Networking (Neutron). Otherwise Nova Network will be used.
CONFIG_NEUTRON_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack
# Dashboard (Horizon)
CONFIG_HORIZON_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack Object
# Storage (Swift)
CONFIG_SWIFT_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack
# Metering (Ceilometer)
CONFIG_CEILOMETER_INSTALL=y
# Set to 'y' if you would like Packstack to install OpenStack
# Orchestration (Heat)
CONFIG_HEAT_INSTALL=y
# Set to 'y' if you would like Packstack to install the OpenStack
# Client packages. An admin "rc" file will also be installed
CONFIG_CLIENT_INSTALL=y
# Comma separated list of NTP servers. Leave plain if Packstack
# should not install ntpd on instances.
CONFIG_NTP_SERVERS=
# Set to 'y' if you would like Packstack to install Nagios to monitor
# OpenStack hosts
CONFIG_NAGIOS_INSTALL=y
# Comma separated list of servers to be excluded from installation in
# case you are running Packstack the second time with the same answer
# file and don't want Packstack to touch these servers. Leave plain if
# you don't need to exclude any server.
EXCLUDE_SERVERS=
# Set to 'y' if you want to run OpenStack services in debug mode.
# Otherwise set to 'n'.
CONFIG_DEBUG_MODE=n
# The IP address of the server on which to install OpenStack services
# specific to controller role such as API servers, Horizon, etc.
CONFIG_CONTROLLER_HOST=10.10.2.2
# The list of IP addresses of the server on which to install the Nova
# compute service
CONFIG_COMPUTE_HOSTS=10.10.2.2
# The list of IP addresses of the server on which to install the
# network service such as Nova network or Neutron
CONFIG_NETWORK_HOSTS=10.10.2.2
# Set to 'y' if you want to use VMware vCenter as hypervisor and
# storage. Otherwise set to 'n'.
CONFIG_VMWARE_BACKEND=y
# The IP address of the VMware vCenter server
CONFIG_VCENTER_HOST=192.168.1.9
# The username to authenticate to VMware vCenter server
CONFIG_VCENTER_USER=root
# The password to authenticate to VMware vCenter server
CONFIG_VCENTER_PASSWORD=tcl@123
# The name of the vCenter cluster
CONFIG_VCENTER_CLUSTER_NAME=ssoccluster
# To subscribe each server to EPEL enter "y"
CONFIG_USE_EPEL=y
# A comma separated list of URLs to any additional yum repositories
# to install
CONFIG_REPO=
# To subscribe each server with Red Hat subscription manager, include
# this with CONFIG_RH_PW
CONFIG_RH_USER=
# To subscribe each server with Red Hat subscription manager, include
# this with CONFIG_RH_USER
CONFIG_RH_PW=
# To enable RHEL optional repos use value "y"
CONFIG_RH_OPTIONAL=y
# To subscribe each server with RHN Satellite,fill Satellite's URL
# here. Note that either satellite's username/password or activation
# key has to be provided
CONFIG_SATELLITE_URL=
# Username to access RHN Satellite
CONFIG_SATELLITE_USER=
# Password to access RHN Satellite
CONFIG_SATELLITE_PW=
# Activation key for subscription to RHN Satellite
CONFIG_SATELLITE_AKEY=
# Specify a path or URL to a SSL CA certificate to use
CONFIG_SATELLITE_CACERT=
# If required specify the profile name that should be used as an
# identifier for the system in RHN Satellite
CONFIG_SATELLITE_PROFILE=
# Comma separated list of flags passed to rhnreg_ks. Valid flags are:
# novirtinfo, norhnsd, nopackages
CONFIG_SATELLITE_FLAGS=
# Specify a HTTP proxy to use with RHN Satellite
CONFIG_SATELLITE_PROXY=
# Specify a username to use with an authenticated HTTP proxy
CONFIG_SATELLITE_PROXY_USER=
# Specify a password to use with an authenticated HTTP proxy.
CONFIG_SATELLITE_PROXY_PW=
# Set the AMQP service backend. Allowed values are: qpid, rabbitmq
CONFIG_AMQP_BACKEND=rabbitmq
# The IP address of the server on which to install the AMQP service
CONFIG_AMQP_HOST=10.10.2.2
# Enable SSL for the AMQP service
CONFIG_AMQP_ENABLE_SSL=n
# Enable Authentication for the AMQP service
CONFIG_AMQP_ENABLE_AUTH=n
# The password for the NSS certificate database of the AMQP service
CONFIG_AMQP_NSS_CERTDB_PW=changeme
# The port in which the AMQP service listens to SSL connections
CONFIG_AMQP_SSL_PORT=5671
# The filename of the certificate that the AMQP service is going to
# use
CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
# The filename of the private key that the AMQP service is going to
# use
CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
# Auto Generates self signed SSL certificate and key
CONFIG_AMQP_SSL_SELF_SIGNED=y
# User for amqp authentication
CONFIG_AMQP_AUTH_USER=amqp_user
# Password for user authentication
CONFIG_AMQP_AUTH_PASSWORD=changeme
# The IP address of the server on which to install MySQL or IP
# address of DB server to use if MySQL installation was not selected
CONFIG_MYSQL_HOST=10.10.2.2
# Username for the MySQL admin user
CONFIG_MYSQL_USER=root
# Password for the MySQL admin user
CONFIG_MYSQL_PW=changeme
# The password to use for the Keystone to access DB
CONFIG_KEYSTONE_DB_PW=changeme
# The token to use for the Keystone service api
CONFIG_KEYSTONE_ADMIN_TOKEN=changeme
# The password to use for the Keystone admin user
CONFIG_KEYSTONE_ADMIN_PW=changeme
# The password to use for the Keystone demo user
CONFIG_KEYSTONE_DEMO_PW=changeme
# Kestone token format. Use either UUID or PKI
CONFIG_KEYSTONE_TOKEN_FORMAT=UUID
# The password to use for the Glance to access DB
CONFIG_GLANCE_DB_PW=changeme
# The password to use for the Glance to authenticate with Keystone
CONFIG_GLANCE_KS_PW=changeme
# The password to use for the Cinder to access DB
CONFIG_CINDER_DB_PW=changeme
# The password to use for the Cinder to authenticate with Keystone
CONFIG_CINDER_KS_PW=changeme
# The Cinder backend to use, valid options are: lvm, gluster, nfs
CONFIG_CINDER_BACKEND=lvm
# Create Cinder's volumes group. This should only be done for testing
# on a proof-of-concept installation of Cinder. This will create a
# file-backed volume group and is not suitable for production usage.
CONFIG_CINDER_VOLUMES_CREATE=y
# Cinder's volumes group size. Note that actual volume size will be
# extended with 3% more space for VG metadata.
CONFIG_CINDER_VOLUMES_SIZE=8G
# A single or comma separated list of gluster volume shares to mount,
# eg: ip-address:/vol-name, domain:/vol-name
CONFIG_CINDER_GLUSTER_MOUNTS=
# A single or comma seprated list of NFS exports to mount, eg: ip-
# address:/export-name
CONFIG_CINDER_NFS_MOUNTS=
# The password to use for the Nova to access DB
CONFIG_NOVA_DB_PW=changeme
# The password to use for the Nova to authenticate with Keystone
CONFIG_NOVA_KS_PW=changeme
# The overcommitment ratio for virtual to physical CPUs. Set to 1.0
# to disable CPU overcommitment
CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
# The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
# disable RAM overcommitment
CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
# Private interface for Flat DHCP on the Nova compute servers
CONFIG_NOVA_COMPUTE_PRIVIF=eth1
# Nova network manager
CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
# Public interface on the Nova network server
CONFIG_NOVA_NETWORK_PUBIF=
# Private interface for network manager on the Nova network server
CONFIG_NOVA_NETWORK_PRIVIF=
# IP Range for network manager
CONFIG_NOVA_NETWORK_FIXEDRANGE=
# IP Range for Floating IP's
CONFIG_NOVA_NETWORK_FLOATRANGE=
# Name of the default floating pool to which the specified floating
# ranges are added to
CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
# Automatically assign a floating IP to new instances
CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
# First VLAN for private networks
CONFIG_NOVA_NETWORK_VLAN_START=
# Number of networks to support
CONFIG_NOVA_NETWORK_NUMBER=
# Number of addresses in each private subnet
CONFIG_NOVA_NETWORK_SIZE=
# The password to use for Neutron to authenticate with Keystone
CONFIG_NEUTRON_KS_PW=changeme
# The password to use for Neutron to access DB
CONFIG_NEUTRON_DB_PW=changeme
# The name of the bridge that the Neutron L3 agent will use for
# external traffic, or 'provider' if using provider networks
CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
# The name of the L2 plugin to be used with Neutron
CONFIG_NEUTRON_L2_PLUGIN=ml2
# Neutron metadata agent password
CONFIG_NEUTRON_METADATA_PW=changeme
# Set to 'y' if you would like Packstack to install Neutron LBaaS
CONFIG_LBAAS_INSTALL=y
# Set to 'y' if you would like Packstack to install Neutron L3
# Metering agent
CONFIG_NEUTRON_METERING_AGENT_INSTALL=n
# Whether to configure neutron Firewall as a Service
CONFIG_NEUTRON_FWAAS=y
# A comma separated list of network type driver entrypoints to be
# loaded from the neutron.ml2.type_drivers namespace.
CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vlan,vxlan
# A comma separated ordered list of network_types to allocate as
# tenant networks. The value 'local' is only useful for single-box
# testing but provides no connectivity between hosts.
CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vlan
# A comma separated ordered list of networking mechanism driver
# entrypoints to be loaded from the neutron.ml2.mechanism_drivers
# namespace.
CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch,cisco_nexus
# A comma separated list of physical_network names with which flat
# networks can be created. Use * to allow flat networks with arbitrary
# physical_network names.
CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
# A comma separated list of <physical_network>:<vlan_min>:<vlan_max>
# or <physical_network> specifying physical_network names usable for
# VLAN provider and tenant networks, as well as ranges of VLAN tags on
# each available for allocation to tenant networks.
CONFIG_NEUTRON_ML2_VLAN_RANGES=
# A comma separated list of <tun_min>:<tun_max> tuples enumerating
# ranges of GRE tunnel IDs that are available for tenant network
# allocation. Should be an array with tun_max +1 - tun_min > 1000000
CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=
# Multicast group for VXLAN. If unset, disables VXLAN enable sending
# allocate broadcast traffic to this multicast group. When left
# unconfigured, will disable multicast VXLAN mode. Should be an
# Multicast IP (v4 or v6) address.
CONFIG_NEUTRON_ML2_VXLAN_GROUP=
# A comma separated list of <vni_min>:<vni_max> tuples enumerating
# ranges of VXLAN VNI IDs that are available for tenant network
# allocation. Min value is 0 and Max value is 16777215.
CONFIG_NEUTRON_ML2_VNI_RANGES=
# The name of the L2 agent to be used with Neutron
CONFIG_NEUTRON_L2_AGENT=openvswitch
# The type of network to allocate for tenant networks (eg. vlan,
# local)
CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
# A comma separated list of VLAN ranges for the Neutron linuxbridge
# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
CONFIG_NEUTRON_LB_VLAN_RANGES=
# A comma separated list of interface mappings for the Neutron
# linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
# :br-eth3)
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
# Type of network to allocate for tenant networks (eg. vlan, local,
# gre, vxlan)
CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vlan
# A comma separated list of VLAN ranges for the Neutron openvswitch
# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
CONFIG_NEUTRON_OVS_VLAN_RANGES=
# A comma separated list of bridge mappings for the Neutron
# openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
# :br-eth3)
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=
# A comma separated list of colon-separated OVS bridge:interface
# pairs. The interface will be added to the associated bridge.
CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
# A comma separated list of tunnel ranges for the Neutron openvswitch
# plugin (eg. 1:1000)
CONFIG_NEUTRON_OVS_TUNNEL_RANGES=
# The interface for the OVS tunnel. Packstack will override the IP
# address used for tunnels on this hypervisor to the IP found on the
# specified interface. (eg. eth1)
CONFIG_NEUTRON_OVS_TUNNEL_IF=
# VXLAN UDP port
CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
# To set up Horizon communication over https set this to 'y'
CONFIG_HORIZON_SSL=n
# PEM encoded certificate to be used for ssl on the https server,
# leave blank if one should be generated, this certificate should not
# require a passphrase
CONFIG_SSL_CERT=
# SSL keyfile corresponding to the certificate if one was entered
CONFIG_SSL_KEY=
# PEM encoded CA certificates from which the certificate chain of the
# server certificate can be assembled.
CONFIG_SSL_CACHAIN=
# The password to use for the Swift to authenticate with Keystone
CONFIG_SWIFT_KS_PW=changeme
# A comma separated list of devices which to use as Swift Storage
# device. Each entry should take the format /path/to/dev, for example
# /dev/vdb will install /dev/vdb as Swift storage device (packstack
# does not create the filesystem, you must do this first). If value is
# omitted Packstack will create a loopback device for test setup
CONFIG_SWIFT_STORAGES=
# Number of swift storage zones, this number MUST be no bigger than
# the number of storage devices configured
CONFIG_SWIFT_STORAGE_ZONES=1
# Number of swift storage replicas, this number MUST be no bigger
# than the number of storage zones configured
CONFIG_SWIFT_STORAGE_REPLICAS=1
# FileSystem type for storage nodes
CONFIG_SWIFT_STORAGE_FSTYPE=ext4
# Shared secret for Swift
CONFIG_SWIFT_HASH=changeme
# Size of the swift loopback file storage device
CONFIG_SWIFT_STORAGE_SIZE=2G
# Whether to provision for demo usage and testing. Note that
# provisioning is only supported for all-in-one installations.
CONFIG_PROVISION_DEMO=y
# Whether to configure tempest for testing
CONFIG_PROVISION_TEMPEST=n
# The name of the Tempest Provisioning user. If you don't provide a
# user name, Tempest will be configured in a standalone mode
CONFIG_PROVISION_TEMPEST_USER=
# The password to use for the Tempest Provisioning user
CONFIG_PROVISION_TEMPEST_USER_PW=changeme
# The CIDR network address for the floating IP subnet
CONFIG_PROVISION_DEMO_FLOATRANGE=10.10.4.0/24
# The uri of the tempest git repository to use
CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
# The revision of the tempest git repository to use
CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
# Whether to configure the ovs external bridge in an all-in-one
# deployment
CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
# The password used by Heat user to authenticate against MySQL
CONFIG_HEAT_DB_PW=changeme
# The encryption key to use for authentication info in database
CONFIG_HEAT_AUTH_ENC_KEY=changeme
# The password to use for the Heat to authenticate with Keystone
CONFIG_HEAT_KS_PW=changeme
# Set to 'y' if you would like Packstack to install Heat CloudWatch
# API
CONFIG_HEAT_CLOUDWATCH_INSTALL=n
# Set to 'y' if you would like Packstack to install Heat
# CloudFormation API
CONFIG_HEAT_CFN_INSTALL=n
# Name of Keystone domain for Heat
CONFIG_HEAT_DOMAIN=heat
# Name of Keystone domain admin user for Heat
CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
# Password for Keystone domain admin user for Heat
CONFIG_HEAT_DOMAIN_PASSWORD=changeme
# Secret key for signing metering messages
CONFIG_CEILOMETER_SECRET=changeme
# The password to use for Ceilometer to authenticate with Keystone
CONFIG_CEILOMETER_KS_PW=changeme
# The IP address of the server on which to install MongoDB
CONFIG_MONGODB_HOST=10.10.2.2
# The password of the nagiosadmin user on the Nagios server
CONFIG_NAGIOS_PW=changeme
==============
9 years, 7 months
[Rdo-list] Getting support for AMQP 1.0 messaging in RDO
by Ken Giusti
Greetings!
The next release of oslo.messaging (Juno) will provide support for version 1.0 of the AMQP messaging protocol. This is new feature is being released as an experimental rpc_backend option, with the hopes that the community will take this opportunity to 'kick the tires' a bit.
This new feature has dependencies on the following:
1) A version of the qpidd broker >= 0.26
2) The Qpid Proton libraries (qpid-proton-c)
3) Python bindings for Qpid Proton (python-qpid-proton)
4) The pyngus pure python client API
Items 2 and 3 are available for fedora19+ and RHEL/Centos 6+7 via EPEL.
Item 1 is available for fedora19+, RHEL/Centos 7 _only_ via EPEL.
pyngus (item 4) is currently available via PyPi https://pypi.python.org/pypi/pyngus/1.1.0 - there are no RPMs for it (yet).
My main concerns are RHEL6/Centos6 support for a version of the qpid broker that supports AMQP 1.0, and easier access to pyngus.
I'd like to get pyngus into EPEL, which I assume would satisfy that dependency for RDO.
The bigger issue is broker support in RHEL/Centos6 - base RHEL6 has an old, unsupported version of qpidd (0.14), and the icehouse repo has an old version that does not support AMQP 1.0.
Would it be possible to update the version of qpidd broker in the RDO repos for RHEL/Centos6?
Thanks,
-K
9 years, 7 months
[Rdo-list] RDO-related Meetups in the coming week (September 15, 2014)
by Rich Bowen
The following are the meetups I'm aware of in the coming week where RDO
enthusiasts will be gathering. If you know of others, please do add them
to http://openstack.redhat.com/Events
If you attend any of these meetups, please take pictures, and send me
some. If you blog about the events (and you should), please send me
that, too.
* OpenStack WorkShop by UnitedStack, Tuesday, September 16th, Shanghai -
http://www.meetup.com/China-OpenStack-User-Group/events/203178112/
* Red Hat User Group inaugural happy hour, Wednesday, September 17th,
Seattle -
http://www.meetup.com/Seattle-Red-Hat-Enterprise-Linux-User-Group/
* All about Open Source with The Fedora Project's Robyn Bergeron,
Wednesday, September 17th, Tempe AZ -
http://www.meetup.com/PhoenixRedHatSoftwareUserGroup/events/202336622/
(Ok, so, nothing to do with RDO or OpenStack, but Robyn is well worth
going to hear if you're in the area.
* Taking the Long View: How the Oslo Program Reduces Technical Debt,
Thursday, September 18th, Atlanta, GA -
http://www.meetup.com/openstack-atlanta/events/199573312/
* OpenStack Conference Benelux, Friday, September 19th, Bossum -
http://www.meetup.com/Openstack-Netherlands/events/181447772/
* Tech Day - Rochester, NY - RHCI & JBoss Middleware, Tuesday, September
23, West Henrietta, NY -
http://www.meetup.com/RedHatTechDay/events/204676922/ (Will include
discussion of using CloudForms to orchestrate self-service provisioning
of virtual machines to private and public clouds based on technologies
like Openstack)
--
Rich Bowen - rbowen(a)redhat.com
OpenStack Community Liaison
http://openstack.redhat.com/
9 years, 7 months
