________________________________ From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on behalf of Dmitry Tantsur <dtantsur(a)redhat.com&gt; Sent: Thursday, October 6, 2016 2:03 PM To: rdo-list(a)redhat.com Subject: Re: [rdo-list] RDO Newton GA Test Day - October 13, 14 On 10/05/2016 04:05 PM, Rich Bowen wrote: May I shamelessly ask folks to give Ironic support in TripleO overcloud a try? This is a new thing in Newton, and I know that a lot of people were excited about it. Here is the rough walk-through for testing it: http://tripleo.org/advanced_deployment/baremetal_overcloud.html Could you provide a sample of ironic-config.yaml, which is ready to go , then it would not be a problem to make a test via instack-virt-setup install based on "centos7-newton/current-passed-ci" trunk. Thanks. Boris Thanks! _______________________________________________ rdo-list mailing list rdo-list(a)redhat.com https://www.redhat.com/mailman/listinfo/rdo-list rdo-list Info Page - Red Hat<https://www.redhat.com/mailman/listinfo/rdo-list> www.redhat.com The rdo-list mailing list provides a forum for discussions about installing, running, and using OpenStack on Red Hat based distributions. To see the collection of ... To unsubscribe: rdo-list-unsubscribe(a)redhat.com

On 10/07/2016 08:38 AM, Boris Derzhavets wrote: This is what I used the last time: parameter_defaults: IronicEnabledDrivers: - pxe_ssh - pxe_ipmitool IronicCleaningDiskErase: 'metadata' ControllerExtraConfig: ironic::drivers::ssh::libvirt_uri: 'qemu:///session' NovaSchedulerDefaultFilters: - RetryFilter - AggregateInstanceExtraSpecsFilter - AvailabilityZoneFilter - RamFilter - DiskFilter - ComputeFilter - ComputeCapabilitiesFilter - ImagePropertiesFilter ControllerCount: 3 ComputeCount: 1 OvercloudControlFlavor: control OvercloudComputeFlavor: compute NtpServer: 'pool.ntp.org' This does not include ironic::conductor::cleaning_network_uuid, which has to be set later. As you see, it assumes HA configuration, and using hybrid BM-VM. It can be used for both virtual and non-virtual environments. Also note that setting ironic::drivers::ssh::libvirt_uri is because I used tripleo-quickstart. Remove it for instack-virt-setup. Overall, I would recommend you start with an easier configuration: parameter_defaults: IronicEnabledDrivers: - pxe_ssh - pxe_ipmitool IronicCleaningDiskErase: 'metadata' ControllerCount: 1 ComputeCount: 0 OvercloudControlFlavor: control NtpServer: 'pool.ntp.org'

It would be really helpful to have this somewhere less ephemeral than email, linked in the test day page. On Oct 7, 2016 06:52, "Dmitry Tantsur" <dtantsur(a)redhat.com&gt; wrote:

In testcases etherpad linked from https://www.rdoproject.org/testday/newton/final/ Cheers, Alan

Backup e-mail has been used due to local DNS issues with hotmail.com. Follow http://tripleo.org/advanced_deployment/baremetal_overcloud.html with  your sample parameter_defaults:      IronicEnabledDrivers:          - pxe_ssh          - pxe_ipmitool      IronicCleaningDiskErase: 'metadata'      ControllerCount: 1      ComputeCount: 0      OvercloudControlFlavor: control      NtpServer: 'pool.ntp.org' via instack-virt-setup with NODE_CPU=2 NODE_COUNT=2 NODE_MEMORY=80000 UNDERCLOUD_MEMORY=12000 on  32 GB VIRTHOST 4 CORE i7 CPU (Haswell ) Every time get during overcloud deployment ================================================================================================= 2016-10-10 07:35:42Z [overcloud.Controller.0.Controller]: CREATE_FAILED  ResourceInError: resources.Controller: Went to status ERROR due to "Message: No valid host was found. There are not enough hosts available., Code: 500" ================================================================================================== Due to limited experience both cases tested 1. openstack baremetal introspection bulk start -  is skipped <== I guess has to be skipped. 2. openstack baremetal introspection bulk start -   is done Before overcloud-deploy.sh run. Crashes with same error above. Repos setup (same on VIRTHOST and "instack VM") :- $ sudo yum -y install yum-plugin-priorities $ sudo curl -o /etc/yum.repos.d/delorean-newton.repo \ http://buildlogs.centos.org/centos/7/cloud/x86_64/rdo-trunk-newton-tested... $ sudo curl -o /etc/yum.repos.d/delorean-deps-newton.repo \ https://trunk.rdoproject.org/centos7-newton/delorean-deps.repo  One other test has been completed OK . RDO Newton Overcloud HA deployment via instack-virt-setup on CentOS 7.2 VIRTHOST http://dbaxps.blogspot.com/2016/10/rdo-newton-overcloud-ha-deployment-via... Thanks. Boris. Sorry, but current time frame is more suitable for myself. Понедельник, 10 октября 2016, 13:10 +03:00 от Dmitry Tantsur <dtantsur(a)redhat.com&gt;: С уважением, Boris Derzhavets dba477(a)list.ru

Finally, using template "Simplest ironic-config.yaml (instack-virt-setup)" parameter_defaults: IronicEnabledDrivers: - pxe_ssh IronicCleaningDiskErase: 'metadata' ControllerCount: 1 ComputeCount: 0 I've got :- [stack@instack ~]$ source overcloudrc [stack@instack ~]$ openstack baremetal driver list WARNING: openstackclient.common.utils is deprecated and will be removed after Jun 2017. Please use osc_lib.utils +------------------------------------+------------------------------------+ | Supported driver(s) | Active host(s) | +---------------------+---------------------------------------------------+ | pxe_ssh | overcloud-controller-0.localdomain | +---------------------+---------------------------------------------------+ However , following schema splitting nodes (NODE_COUNT=2) 1. jq '.nodes[0:1] | {nodes: .}' instackenv.json > undercloud.json 2. jq '.nodes[1:2] | {nodes: map({driver: .pm_type, name: .name, driver_info: {ssh_username: .pm_user, ssh_address: .pm_addr, ssh_key_contents: .pm_password, ssh_virt_type: "virsh"}, properties: {cpus: .cpu, cpu_arch: .arch, local_gb: .disk, memory_mb: .memory}, ports: .mac | map({address: .})})}' instackenv.json > overcloud-nodes.yaml 3. * Then we only register the undercloud.json on the undercloud: * source stackrc; openstack baremetal import undercloud.json causes immediate exit of $ source stackrc $ openstack overcloud deploy --templates \ -e /usr/share/openstack-tripleo-heat-templates/environments/services/ironic.yaml \ -e ironic-config.yaml with message "One node registered, but 2 nodes required" So , to get this running I was forced cancel splitting nodes $ jq '.nodes[0:2] | {nodes: .}' instackenv.json > undercloud.json What in turn results :- [stack@instack ~]$ . stackrc [stack@instack ~]$ openstack baremetal node list WARNING: openstackclient.common.utils is deprecated and will be removed after Jun 2017. Please use osc_lib.utils +-------------------+------+-------------------+-------------+--------------------+-----------------------------------------+ | UUID | Name | Instance UUID | Power State | Provisioning State | Maintenance | +-------------------+------+-------------------+-------------+--------------------+------------------------------------------+ | 66ede001-8a82 | None | None | power off | available | False | | -40df- | | | | | | | 8ee6-22511169a2fa | | | | | | | 376b50bc-8ccd-4ac | None | 8ddbe9d1-f8f9-4f2 | power on | active | False | | 0-8191-ce523a8cc9 | | 8-9562-63b10b0d5c | | | | | 4f | | 9f | | | | +-------------------+------+-------------------+-------------+--------------------+-----------------------------------------+ I missing something here, template suggested above requires registering 2 nodes, but not one. Please, advise. Thanks Boris. _____________________________________________________________________________________________ From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on behalf of Dmitry Tantsur <dtantsur(a)redhat.com&gt; Sent: Monday, October 10, 2016 3:42 PM To: Boris Cc: rdo-list Subject: Re: [rdo-list] RDO Newton GA Test Day - October 13, 14 TripleO VENV Testing Sorry, I think you have to either remove "OvercloudControlFlavor: control" or tweak you flavors (the former is the easiest). https://etherpad.openstack.org/p/rdo-newton-ga-testday-ironic-overcloud has the updated samples. On 10/10/2016 02:39 PM, Boris wrote: Bare Metal Instances in Overcloud — tripleo-docs 0.0.1 ...<http://tripleo.org/advanced_deployment/baremetal_overcloud.html> tripleo.org Bare Metal Instances in Overcloud¶ This documentation explains installing Ironic for providing bare metal instances in the overcloud to end users. [https://1.bp.blogspot.com/-OuG1rBXIckc/V_ltfZJ54mI/AAAAAAAAHME/4jHIDlJ8bB... RDO Newton Overcloud HA deployment via instack-virt-setup on CentOS 7.2 VIRTHOST<http://dbaxps.blogspot.com/2016/10/rdo-newton-overcloud-ha-de... dbaxps.blogspot.com Draft belllow may be considered as POC awaiting release of TripleoO QuickStart along with flexible templates managed by ansible and KSM pa... _______________________________________________ rdo-list mailing list rdo-list(a)redhat.com https://www.redhat.com/mailman/listinfo/rdo-list To unsubscribe: rdo-list-unsubscribe(a)redhat.com

On Mon, Oct 10, 2016 at 11:42 AM, Alan Pevec <apevec(a)redhat.com&gt; wrote: Hello, which is the difference between "TripleO" and "TripleO baremetal"? Does is simply because in the first case quickstart script is used, and in second one not? -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com&gt;

Hi Guys, I am really interested in participating in RDO Newton GA test day and we have few baremetal (atleast 5) Cisco UCS servers. I have gone through the test cases related to Triple-O on CentOS and we are really interested in testing out the following : 1. UnderCloud VM and Baremetal Overcloud 2. HA deployment with 3 controllers I am also really interested in testing out "Ironic support in TripleO overcloud". I will be joining in the IRC channel on Newton GA Test Day to work with you guys. Also , please let me know if there is anything else has to be done before starting the testing. I have been part of this community for few months now and I would like to help in any way I can, Thanks a lot. Best Regards, Milind From: rdo-list-bounces(a)redhat.com [mailto:rdo-list-bounces@redhat.com] On Behalf Of Boris Derzhavets Sent: Friday, October 07, 2016 2:38 AM To: Dmitry Tantsur <dtantsur(a)redhat.com>; rdo-list(a)redhat.com Subject: Re: [rdo-list] RDO Newton GA Test Day - October 13, 14 ________________________________ From: rdo-list-bounces@redhat.com<mailto:rdo-list-bounces@redhat.com> <rdo-list-bounces@redhat.com<mailto:rdo-list-bounces@redhat.com>> on behalf of Dmitry Tantsur <dtantsur@redhat.com<mailto:dtantsur@redhat.com>> Sent: Thursday, October 6, 2016 2:03 PM To: rdo-list@redhat.com<mailto:rdo-list@redhat.com> Subject: Re: [rdo-list] RDO Newton GA Test Day - October 13, 14 On 10/05/2016 04:05 PM, Rich Bowen wrote: May I shamelessly ask folks to give Ironic support in TripleO overcloud a try? This is a new thing in Newton, and I know that a lot of people were excited about it. Here is the rough walk-through for testing it: http://tripleo.org/advanced_deployment/baremetal_overcloud.html Could you provide a sample of ironic-config.yaml, which is ready to go , then it would not be a problem to make a test via instack-virt-setup install based on "centos7-newton/current-passed-ci" trunk. Thanks. Boris Thanks! _______________________________________________ rdo-list mailing list rdo-list@redhat.com<mailto:rdo-list@redhat.com> https://www.redhat.com/mailman/listinfo/rdo-list rdo-list Info Page - Red Hat<https://www.redhat.com/mailman/listinfo/rdo-list> www.redhat.com<http://www.redhat.com> The rdo-list mailing list provides a forum for discussions about installing, running, and using OpenStack on Red Hat based distributions. To see the collection of ... To unsubscribe: rdo-list-unsubscribe@redhat.com<mailto:rdo-list-unsubscribe@redhat.com> ________________________________ This e-mail may contain Sprint proprietary information intended for the sole use of the recipient(s). Any use by others is prohibited. If you are not the intended recipient, please contact the sender and delete all copies of the message.