12:42 p.m.
All,
I am hoping you can help to resolve this. While installing RDO into a single VM, I
continue to hit this problem. Appreciate any inputs ..
==
10.110.80.62_mysql.pp: [ DONE ]
10.110.80.62_amqp.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.110.80.62_amqp.pp
err: /Stage[main]/Rabbitmq::Service/Service[rabbitmq-server]/ensure: change from stopped
to running failed: Could not start Service[rabbitmq-server]: Execution of
'/sbin/service rabbitmq-server start' returned 1: at
/var/tmp/packstack/754293704d5e4f66b3dd8532e8bd0300/modules/rabbitmq/manifests/service.pp:37
You will find full trace in log
/var/tmp/packstack/20140702-123959-kJYnai/manifests/10.110.80.62_amqp.pp.log
Please check log file /var/tmp/packstack/20140702-123959-kJYnai/openstack-setup.log for
more information
-----------------------------------------
Lance K. Fang
Consultant Solutions Engineer
Mobile: (510) 393-6208
------------------------------------------
1 p.m.
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
All,
I am hoping you can help to resolve this. While installing RDO into a single VM, I
continue to hit this problem. Appreciate any inputs ..
==
10.110.80.62_mysql.pp: [ DONE ]
10.110.80.62_amqp.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.110.80.62_amqp.pp
err: /Stage[main]/Rabbitmq::Service/Service[rabbitmq-server]/ensure: change from stopped
to running failed: Could not start Service[rabbitmq-server]: Execution of
'/sbin/service rabbitmq-server start' returned 1: at
/var/tmp/packstack/754293704d5e4f66b3dd8532e8bd0300/modules/rabbitmq/manifests/service.pp:37
You will find full trace in log
/var/tmp/packstack/20140702-123959-kJYnai/manifests/10.110.80.62_amqp.pp.log
Please check log file /var/tmp/packstack/20140702-123959-kJYnai/openstack-setup.log for
more information
There's quite a few bugs in the rabbitmq-server package that might be
causing this. Some of them have been fixed recently and some of them I
am actively fixing in rawhide and backporting to F20 (assuming you are
using Fedora).
Can you provide the output of:
rpm -q rabbitmq-server
journalctl -u rabbitmq-server
That should help pin down why it's failing.
1:03 p.m.
John,
Thanks for the prompt response.
Here is the output:
[root@sse-durl-ora1 ~]# rpm -q rabbitmq-server
rabbitmq-server-3.1.5-1.el6.noarch
[root@sse-durl-ora1 ~]# journalctl -u rabbitmq-server (looks like the command was not
found)
-bash: journalctl: command not found
-----Original Message-----
From: John Eckersberg [mailto:jeckersb@redhat.com]
Sent: Wednesday, July 02, 2014 11:01 AM
To: Fang, Lance; rdo-list(a)redhat.com
Subject: Re: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
All,
I am hoping you can help to resolve this. While installing RDO into a single VM, I
continue to hit this problem. Appreciate any inputs ..
==
10.110.80.62_mysql.pp: [ DONE ]
10.110.80.62_amqp.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.110.80.62_amqp.pp
err: /Stage[main]/Rabbitmq::Service/Service[rabbitmq-server]/ensure:
change from stopped to running failed: Could not start
Service[rabbitmq-server]: Execution of '/sbin/service rabbitmq-server
start' returned 1: at
/var/tmp/packstack/754293704d5e4f66b3dd8532e8bd0300/modules/rabbitmq/m
anifests/service.pp:37 You will find full trace in log
/var/tmp/packstack/20140702-123959-kJYnai/manifests/10.110.80.62_amqp.
pp.log Please check log file
/var/tmp/packstack/20140702-123959-kJYnai/openstack-setup.log for more
information
There's quite a few bugs in the rabbitmq-server package that might be causing this.
Some of them have been fixed recently and some of them I am actively fixing in rawhide and
backporting to F20 (assuming you are using Fedora).
Can you provide the output of:
rpm -q rabbitmq-server
journalctl -u rabbitmq-server
That should help pin down why it's failing.
1:50 p.m.
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
John,
Thanks for the prompt response.
Here is the output:
[root@sse-durl-ora1 ~]# rpm -q rabbitmq-server
rabbitmq-server-3.1.5-1.el6.noarch
[root@sse-durl-ora1 ~]# journalctl -u rabbitmq-server (looks like the command was not
found)
-bash: journalctl: command not found
Ah ok, this is an EL6 system, not Fedora. In that case, how about the
output from...
cat /var/log/rabbitmq/startup_log
cat /var/log/rabbitmq/startup_err
1:53 p.m.
John,
Yes .. this is RH. Here you go...
==
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_log
RabbitMQ 3.1.5. Copyright (C) 2007-2013 GoPivotal, Inc.
## ## Licensed under the MPL. See http://www.rabbitmq.com/
## ##
########## Logs: /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
###### ## /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
##########
Starting broker...
BOOT FAILED
===========
Error description:
{could_not_start_tcp_listener,{"::",5672}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
Stack trace:
[{rabbit_networking,start_listener0,4},
{rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
{rabbit_networking,start_listener,4},
{rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
{rabbit_networking,boot_tcp,0},
{rabbit_networking,boot,0},
{rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
{rabbit,run_boot_step,1}]
BOOT FAILED
===========
Error description:
{could_not_start,rabbit,
{bad_return,
{{rabbit,start,[normal,[]]},
{'EXIT',
{rabbit,failure_during_boot,
{could_not_start_tcp_listener,{"::",5672}}}}}}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
{"init terminating in
do_boot",{rabbit,failure_during_boot,{could_not_start,rabbit,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot,{could_not_start_tcp_listener,{"::",5672}}}}}}}}}
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_err
Crash dump was written to: erl_crash.dump
init terminating in do_boot ()
==
-----Original Message-----
From: John Eckersberg [mailto:jeckersb@redhat.com]
Sent: Wednesday, July 02, 2014 11:50 AM
To: Fang, Lance; rdo-list(a)redhat.com
Subject: RE: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
John,
Thanks for the prompt response.
Here is the output:
[root@sse-durl-ora1 ~]# rpm -q rabbitmq-server
rabbitmq-server-3.1.5-1.el6.noarch
[root@sse-durl-ora1 ~]# journalctl -u rabbitmq-server (looks like the command was not
found)
-bash: journalctl: command not found
Ah ok, this is an EL6 system, not Fedora. In that case, how about the output from...
cat /var/log/rabbitmq/startup_log
cat /var/log/rabbitmq/startup_err
2:03 p.m.
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
John,
Yes .. this is RH. Here you go...
==
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_log
RabbitMQ 3.1.5. Copyright (C) 2007-2013 GoPivotal, Inc.
## ## Licensed under the MPL. See http://www.rabbitmq.com/
## ##
########## Logs: /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
###### ## /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
##########
Starting broker...
BOOT FAILED
===========
Error description:
{could_not_start_tcp_listener,{"::",5672}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
Stack trace:
[{rabbit_networking,start_listener0,4},
{rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
{rabbit_networking,start_listener,4},
{rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
{rabbit_networking,boot_tcp,0},
{rabbit_networking,boot,0},
{rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
{rabbit,run_boot_step,1}]
BOOT FAILED
===========
Error description:
{could_not_start,rabbit,
{bad_return,
{{rabbit,start,[normal,[]]},
{'EXIT',
{rabbit,failure_during_boot,
{could_not_start_tcp_listener,{"::",5672}}}}}}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
{"init terminating in
do_boot",{rabbit,failure_during_boot,{could_not_start,rabbit,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot,{could_not_start_tcp_listener,{"::",5672}}}}}}}}}
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_err
Crash dump was written to: erl_crash.dump
init terminating in do_boot ()
OK, that looks like something else is already listening on the port.
Anything in the output for:
ss -lp sport = :amqp
?
4:35 p.m.
Sorry for the delay .. .Here is the output.
[root@sse-durl-ora1 howto]# ss -lp sport = :amqp
State Recv-Q Send-Q Local Address:Port
Peer Address:Port
LISTEN 0 10 :::amqp
:::* users:(("qpidd",1925,12))
LISTEN 0 10 *:amqp
*:* users:(("qpidd",1925,11))
-----Original Message-----
From: John Eckersberg [mailto:jeckersb@redhat.com]
Sent: Wednesday, July 02, 2014 12:04 PM
To: Fang, Lance; rdo-list(a)redhat.com
Subject: RE: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
John,
Yes .. this is RH. Here you go...
==
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_log
RabbitMQ 3.1.5. Copyright (C) 2007-2013 GoPivotal, Inc.
## ## Licensed under the MPL. See http://www.rabbitmq.com/
## ##
########## Logs: /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
###### ## /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
##########
Starting broker...
BOOT FAILED
===========
Error description:
{could_not_start_tcp_listener,{"::",5672}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
Stack trace:
[{rabbit_networking,start_listener0,4},
{rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
{rabbit_networking,start_listener,4},
{rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
{rabbit_networking,boot_tcp,0},
{rabbit_networking,boot,0},
{rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
{rabbit,run_boot_step,1}]
BOOT FAILED
===========
Error description:
{could_not_start,rabbit,
{bad_return,
{{rabbit,start,[normal,[]]},
{'EXIT',
{rabbit,failure_during_boot,
{could_not_start_tcp_listener,{"::",5672}}}}}}}
Log files (may contain more information):
/var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
/var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
{"init terminating in
do_boot",{rabbit,failure_during_boot,{could_not_start,rabbit,{bad_retu
rn,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot,{co
uld_not_start_tcp_listener,{"::",5672}}}}}}}}}
[root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_err
Crash dump was written to: erl_crash.dump init terminating in do_boot
()
OK, that looks like something else is already listening on the port.
Anything in the output for:
ss -lp sport = :amqp
?
5:14 p.m.
On 2 Jul 2014, at 22:35, Fang, Lance <Lance.Fang(a)emc.com> wrote:
Sorry for the delay .. .Here is the output.
[root@sse-durl-ora1 howto]# ss -lp sport = :amqp
State Recv-Q Send-Q Local Address:Port
Peer Address:Port
LISTEN 0 10 :::amqp
:::*
users:(("qpidd",1925,12))
LISTEN 0 10 *:amqp
*:*
users:(("qpidd",1925,11))
Looks like you’ve somehow got qpid installed and running too.
Firstly, I’d stop and disable this service:
service qpidd stop && chkconfig qpidd off
Then attempt to restart RabbitMQ (or re-run packstack)
Did you attempt this installation on a clean system or one that already had a previous
OpenStack installation?
-----Original Message-----
From: John Eckersberg [mailto:jeckersb@redhat.com]
Sent: Wednesday, July 02, 2014 12:04 PM
To: Fang, Lance; rdo-list(a)redhat.com
Subject: RE: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
> John,
>
> Yes .. this is RH. Here you go...
>
> ==
> [root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_log
>
> RabbitMQ 3.1.5. Copyright (C) 2007-2013 GoPivotal, Inc.
> ## ## Licensed under the MPL. See http://www.rabbitmq.com/
> ## ##
> ########## Logs: /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> ###### ## /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
> ##########
> Starting broker...
>
> BOOT FAILED
> ===========
>
> Error description:
> {could_not_start_tcp_listener,{"::",5672}}
>
> Log files (may contain more information):
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
>
> Stack trace:
> [{rabbit_networking,start_listener0,4},
> {rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
> {rabbit_networking,start_listener,4},
> {rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
> {rabbit_networking,boot_tcp,0},
> {rabbit_networking,boot,0},
> {rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
> {rabbit,run_boot_step,1}]
>
>
>
> BOOT FAILED
> ===========
>
> Error description:
> {could_not_start,rabbit,
> {bad_return,
> {{rabbit,start,[normal,[]]},
> {'EXIT',
> {rabbit,failure_during_boot,
> {could_not_start_tcp_listener,{"::",5672}}}}}}}
>
> Log files (may contain more information):
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
>
> {"init terminating in
> do_boot",{rabbit,failure_during_boot,{could_not_start,rabbit,{bad_retu
> rn,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot,{co
> uld_not_start_tcp_listener,{"::",5672}}}}}}}}}
>
>
> [root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_err
>
> Crash dump was written to: erl_crash.dump init terminating in do_boot
> ()
>
OK, that looks like something else is already listening on the port.
Anything in the output for:
ss -lp sport = :amqp
?
_______________________________________________
Rdo-list mailing list
Rdo-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list
5:53 p.m.
Guys,
Thanks ...
Executed the following and seems like I got passed the rabbitmq issue but not out of the
wood as yet.
service qpidd stop
chkconfig qpidd off
HammerRemoveOpenStack.sh
packstack --allinone
Now I am hitting keystone error below. From log
/var/tmp/packstack/20140702-174029-Wvlkfj/manifests/10.110.80.62_keystone.pp.log.
Appreciate your continue help ...
==
warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because
of failed dependencies
notice: /Stage[main]/Swift::Keystone::Auth/Keystone_role[SwiftOperator]: Dependency
Service[keystone] has failures: true
warning: /Stage[main]/Swift::Keystone::Auth/Keystone_role[SwiftOperator]: Skipping because
of failed dependencies
err: Could not prefetch keystone_endpoint provider 'keystone': Execution of
'/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ e
ndpoint-list' returned 1: /usr/lib64/python2.6/site-packages/Crypto/Util/number.py:57:
PowmInsecureWarning: Not using mpz_powm_sec. You should r
ebuild using libgmp >= 5 to avoid timing attack vulnerability.
_warn("Not using mpz_powm_sec. You should rebuild using libgmp >= 5 to avoid
timing attack vulnerability.", PowmInsecureWarning)
Unable to establish connection to http://127.0.0.1:35357/v2.0/endpoints
When manually execute command:
[root@sse-durl-ora1 ~]# /sbin/service openstack-keystone start
Starting keystone: [FAILED]
-----Original Message-----
From: Rhys Oxenham [mailto:roxenham@redhat.com]
Sent: Wednesday, July 02, 2014 3:15 PM
To: Fang, Lance
Cc: John Eckersberg; rdo-list(a)redhat.com
Subject: Re: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
On 2 Jul 2014, at 22:35, Fang, Lance <Lance.Fang(a)emc.com> wrote:
Sorry for the delay .. .Here is the output.
[root@sse-durl-ora1 howto]# ss -lp sport = :amqp
State Recv-Q Send-Q Local Address:Port
Peer Address:Port
LISTEN 0 10 :::amqp
:::*
users:(("qpidd",1925,12))
LISTEN 0 10 *:amqp
*:*
users:(("qpidd",1925,11))
Looks like you've somehow got qpid installed and running too.
Firstly, I'd stop and disable this service:
service qpidd stop && chkconfig qpidd off
Then attempt to restart RabbitMQ (or re-run packstack)
Did you attempt this installation on a clean system or one that already had a previous
OpenStack installation?
-----Original Message-----
From: John Eckersberg [mailto:jeckersb@redhat.com]
Sent: Wednesday, July 02, 2014 12:04 PM
To: Fang, Lance; rdo-list(a)redhat.com
Subject: RE: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
"Fang, Lance" <Lance.Fang(a)emc.com> writes:
> John,
>
> Yes .. this is RH. Here you go...
>
> ==
> [root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_log
>
> RabbitMQ 3.1.5. Copyright (C) 2007-2013 GoPivotal, Inc.
> ## ## Licensed under the MPL. See http://www.rabbitmq.com/
> ## ##
> ########## Logs: /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> ###### ## /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
> ##########
> Starting broker...
>
> BOOT FAILED
> ===========
>
> Error description:
> {could_not_start_tcp_listener,{"::",5672}}
>
> Log files (may contain more information):
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
>
> Stack trace:
> [{rabbit_networking,start_listener0,4},
> {rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
> {rabbit_networking,start_listener,4},
> {rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
> {rabbit_networking,boot_tcp,0},
> {rabbit_networking,boot,0},
> {rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
> {rabbit,run_boot_step,1}]
>
>
>
> BOOT FAILED
> ===========
>
> Error description:
> {could_not_start,rabbit,
> {bad_return,
> {{rabbit,start,[normal,[]]},
> {'EXIT',
> {rabbit,failure_during_boot,
> {could_not_start_tcp_listener,{"::",5672}}}}}}}
>
> Log files (may contain more information):
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1.log
> /var/log/rabbitmq/rabbit(a)sse-durl-ora1-sasl.log
>
> {"init terminating in
> do_boot",{rabbit,failure_during_boot,{could_not_start,rabbit,{bad_ret
> u
> rn,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot,{c
> o uld_not_start_tcp_listener,{"::",5672}}}}}}}}}
>
>
> [root@sse-durl-ora1 howto]# cat /var/log/rabbitmq/startup_err
>
> Crash dump was written to: erl_crash.dump init terminating in do_boot
> ()
>
OK, that looks like something else is already listening on the port.
Anything in the output for:
ss -lp sport = :amqp
?
_______________________________________________
Rdo-list mailing list
Rdo-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list
3:45 a.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
On 03/07/14 00:53, Fang, Lance wrote:
PowmInsecureWarning: Not using mpz_powm_sec. You should r ebuild
using libgmp >= 5 to avoid timing attack vulnerability
Do you have all the needed repos enabled for yum?
See: http://openstack.redhat.com/Repositories
/Ihar
-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.22 (Darwin)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBCgAGBQJTtRgfAAoJEC5aWaUY1u57VOwIAI+bKVyZ7IkAIyLCZBeTYwgE
J4ecYKv/LerCel/lFlJGhw1KApdqS9VvFJibGFpQlHtPA/DEgoENPcpxEkAaXB/z
BXd/6Cm/H+d6TL1bSPK89bKn2FIZnnw0koTXUTkV4nTX+Kt3O5ojo/jWpL1HP/x2
LGUqIQZUkQyr2NbRR8LL7UnAQZM8PXFWLST0XAIOXWXwxwDMl5pcENJucT5iC5cR
DLbNs8mtm7OgQG5+eTic2OvIVv8LY8ufbeOqr79MoB2FNIWUnw6aUMwiFJe4umsM
mHNFGn4RQk/wr8cfRuC2sOA5uZUSh4XF1JiwLis6McML/7C8OblJ5bODSzwXolA=
=NPPV
-----END PGP SIGNATURE-----
11:47 a.m.
Ihar,
Thank you for responding. Looking at the link and it is not clear what I should add/enable
to the repos.
Here is what I have:
[root@sse-durl-ora1 yum.repos.d]# ls -lt
total 64
-rw-r--r-- 1 root root 1056 Jul 7 11:19 epel-testing.repo
-rw-r--r-- 1 root root 248 Jul 2 17:40 rdo-release.repo
-rw-r--r-- 1 root root 957 Jul 2 17:40 epel.repo
-rw-r--r-- 1 root root 1220 Jul 2 17:39 puppetlabs.repo
-rw-r--r-- 1 root root 707 Jul 2 17:39 foreman.repo
-----Original Message-----
From: rdo-list-bounces(a)redhat.com [mailto:rdo-list-bounces@redhat.com] On Behalf Of Ihar
Hrachyshka
Sent: Thursday, July 03, 2014 1:45 AM
To: rdo-list(a)redhat.com
Subject: Re: [Rdo-list] ERROR while installing RDO (rabbitmq-server)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
On 03/07/14 00:53, Fang, Lance wrote:
PowmInsecureWarning: Not using mpz_powm_sec. You should r ebuild
using libgmp >= 5 to avoid timing attack vulnerability
Do you have all the needed repos enabled for yum?
See: http://openstack.redhat.com/Repositories
/Ihar
-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.22 (Darwin)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBCgAGBQJTtRgfAAoJEC5aWaUY1u57VOwIAI+bKVyZ7IkAIyLCZBeTYwgE
J4ecYKv/LerCel/lFlJGhw1KApdqS9VvFJibGFpQlHtPA/DEgoENPcpxEkAaXB/z
BXd/6Cm/H+d6TL1bSPK89bKn2FIZnnw0koTXUTkV4nTX+Kt3O5ojo/jWpL1HP/x2
LGUqIQZUkQyr2NbRR8LL7UnAQZM8PXFWLST0XAIOXWXwxwDMl5pcENJucT5iC5cR
DLbNs8mtm7OgQG5+eTic2OvIVv8LY8ufbeOqr79MoB2FNIWUnw6aUMwiFJe4umsM
mHNFGn4RQk/wr8cfRuC2sOA5uZUSh4XF1JiwLis6McML/7C8OblJ5bODSzwXolA=
=NPPV
-----END PGP SIGNATURE-----
_______________________________________________
Rdo-list mailing list
Rdo-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list
3588
days inactive
3593
days old
10 comments
4 participants
participants (4)
-
Fang, Lance -
Ihar Hrachyshka -
John Eckersberg -
Rhys Oxenham