1:03 p.m.
I've been working with mjturek and baha on this a bit. I've responded inline
below, but also want to clarify on the desired workflow.
TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly integrated and
uploaded. This can be done with docker manifest list images.
The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
The process boils down to the following steps:
1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
2) Upload an image of the second architecture (ex: image1:ppc64le_01012019)
3) Upload manifest list image of the image (ex: image1:01012019)
Step 3 is essentially just pushing a JSON body that has descriptors and references to the
other two images, such that when someone does a pull request of the manifest list image,
it will gather the appropriate architecture for that image based on the host's
architecture.
-Trevor
PS. If I've missed something important with the overall concerns here I apologize, but
thought it necessary to spell out the goal as I understand it.
On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com>
wrote:
----- Original Message -----
> Hi all,
>
> Over the last few weeks, mjturek and baha have been busy working on a set of
> periodic jobs to build TripleO images for the ppc64le arch [1].
>
> The current missing step is publishing those images, and they are proposing
> to push those to the RDO Registry instance at registry.rdoproject.org, just
> like we do with our TripleO images. I have tried to understand the
> requirements, and would like to get input on the following topics:
>
> - Which namespace would these images use? Based on some logs [2] it looks
> like they use tripleomaster-ppc64le, will they also push the images to that
> namespace?
I have no experience in namespaces inside of a registry or how that differentiates images
from one another, but the images should be pushed (in my opinion) to the same location in
which the x86 images reside.
> - Could this create any conflicts with our current promotion
pipeline?
This should not cause conflicts in current promotion pipeline, as the process should be an
extension to existing functionality.
> - Is registry.rdo the right place for those images? I'm not
familiar with the
> next steps for ppc64le images after that (will it then go through a
> promotion pipeline?), so that might affect.
If the x86 images exist in registry.rdo, then the ppc64le (and any other architecture
image) should exist there as well. I can't think of a reason to differentiate between
architectures when the desired result is parity and support of more architectures.
>
> If we decide to upload the images to images.rdo, we'll need to do the
Correction: this should read "registry.rdo"
> following:
>
> - Create the tripleomaster-ppc64le namespace in registry.rdo, following a
> similar pattern to [3].
> - Schedule a short registry downtime to increase its disk space, since it is
> currently near its limit.
This is definitely necessary, given the capacity requirement will double, give or take, to
support the additional architecture.
> - Update the job at ci.centos to include the REGISTRY_PASSWORD
environment
> variable with the right token (see [4]). This is missing today, and causing
> the job failure.
>
> Once we get input from all interested parties, we will decide on the next
> steps.
>
> Thanks,
> Javier
>
>
> [1] -
> https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> [2] -
>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> [3] - https://review.rdoproject.org/r/19063
> [4] -
>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
1:12 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Thu, Mar 21, 2019 at 12:03 PM Trevor Vardeman <tvardema(a)redhat.com>
wrote:
I've been working with mjturek and baha on this a bit. I've
responded
inline below, but also want to clarify on the desired workflow.
TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly
integrated and uploaded. This can be done with docker manifest list images.
The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
The process boils down to the following steps:
1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
2) Upload an image of the second architecture (ex:
image1:ppc64le_01012019)
3) Upload manifest list image of the image (ex: image1:01012019)
I think this is implying we upload x86_64, and PPC containers to the rdo
registry together. We specifically do NOT want to do that. One set of
images should not be blocked by the other at this stage of the testing.
I only just read through the manifest doc, so I may be misunderstanding
something.
Any container built w/ tripleo should be tagged w/ the dlrn_hash used while
building so if we needed some containers from x86_64 and some from PPC that
should be relatively simple.
Step 3 is essentially just pushing a JSON body that has descriptors
and
references to the other two images, such that when someone does a pull
request of the manifest list image, it will gather the appropriate
architecture for that image based on the host's architecture.
-Trevor
PS. If I've missed something important with the overall concerns here I
apologize, but thought it necessary to spell out the goal as I understand
it.
> On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
>
>
> ----- Original Message -----
>> Hi all,
>>
>> Over the last few weeks, mjturek and baha have been busy working on a
set of
>> periodic jobs to build TripleO images for the ppc64le arch [1].
>>
>> The current missing step is publishing those images, and they are
proposing
>> to push those to the RDO Registry instance at registry.rdoproject.org,
just
>> like we do with our TripleO images. I have tried to understand the
>> requirements, and would like to get input on the following topics:
>>
>> - Which namespace would these images use? Based on some logs [2] it
looks
>> like they use tripleomaster-ppc64le, will they also push the images to
that
>> namespace?
I have no experience in namespaces inside of a registry or how that
differentiates images from one another, but the images should be pushed (in
my opinion) to the same location in which the x86 images reside.
>> - Could this create any conflicts with our current promotion pipeline?
This should not cause conflicts in current promotion pipeline, as the
process should be an extension to existing functionality.
>> - Is registry.rdo the right place for those images? I'm not familiar
with the
>> next steps for ppc64le images after that (will it then go through a
>> promotion pipeline?), so that might affect.
If the x86 images exist in registry.rdo, then the ppc64le (and any other
architecture image) should exist there as well. I can't think of a reason
to differentiate between architectures when the desired result is parity
and support of more architectures.
>>
>> If we decide to upload the images to images.rdo, we'll need to do the
>
> Correction: this should read "registry.rdo"
>
>> following:
>>
>> - Create the tripleomaster-ppc64le namespace in registry.rdo, following
a
>> similar pattern to [3].
>> - Schedule a short registry downtime to increase its disk space, since
it is
>> currently near its limit.
This is definitely necessary, given the capacity requirement will double,
give or take, to support the additional architecture.
>> - Update the job at ci.centos to include the REGISTRY_PASSWORD
environment
>> variable with the right token (see [4]). This is missing today, and
causing
>> the job failure.
>>
>> Once we get input from all interested parties, we will decide on the
next
>> steps.
>>
>> Thanks,
>> Javier
>>
>>
>> [1] -
>>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
>> [2] -
>>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
>> [3] - https://review.rdoproject.org/r/19063
>> [4] -
>>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
>> _______________________________________________
>> dev mailing list
>> dev(a)lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/dev
>>
>> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
1:20 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Mar 21, 2019, at 1:12 PM, Wesley Hayutin
<whayutin(a)redhat.com> wrote:
On Thu, Mar 21, 2019 at 12:03 PM Trevor Vardeman <tvardema(a)redhat.com> wrote:
I've been working with mjturek and baha on this a bit. I've responded inline
below, but also want to clarify on the desired workflow.
TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly integrated and
uploaded. This can be done with docker manifest list images.
The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
The process boils down to the following steps:
1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
2) Upload an image of the second architecture (ex: image1:ppc64le_01012019)
3) Upload manifest list image of the image (ex: image1:01012019)
I think this is implying we upload x86_64, and PPC containers to the rdo registry
together. We specifically do NOT want to do that. One set of images should not be
blocked by the other at this stage of the testing.
That's not quite right, the images can be uploaded separately, but for the manifest
list image to function properly you'd need both images uploaded. Also, as for the
tagging, I wasn't suggesting a change to how images are tagged save for potentially
modifying it such that the manifest list image is the default tag, versus the x86_64
image.
I only just read through the manifest doc, so I may be misunderstanding something.
Any container built w/ tripleo should be tagged w/ the dlrn_hash used while building so
if we needed some containers from x86_64 and some from PPC that should be relatively
simple.
Step 3 is essentially just pushing a JSON body that has descriptors and references to the
other two images, such that when someone does a pull request of the manifest list image,
it will gather the appropriate architecture for that image based on the host's
architecture.
-Trevor
PS. If I've missed something important with the overall concerns here I apologize,
but thought it necessary to spell out the goal as I understand it.
> On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
>
>
> ----- Original Message -----
>> Hi all,
>>
>> Over the last few weeks, mjturek and baha have been busy working on a set of
>> periodic jobs to build TripleO images for the ppc64le arch [1].
>>
>> The current missing step is publishing those images, and they are proposing
>> to push those to the RDO Registry instance at registry.rdoproject.org, just
>> like we do with our TripleO images. I have tried to understand the
>> requirements, and would like to get input on the following topics:
>>
>> - Which namespace would these images use? Based on some logs [2] it looks
>> like they use tripleomaster-ppc64le, will they also push the images to that
>> namespace?
I have no experience in namespaces inside of a registry or how that differentiates images
from one another, but the images should be pushed (in my opinion) to the same location in
which the x86 images reside.
>> - Could this create any conflicts with our current promotion pipeline?
This should not cause conflicts in current promotion pipeline, as the process should be
an extension to existing functionality.
>> - Is registry.rdo the right place for those images? I'm not familiar with
the
>> next steps for ppc64le images after that (will it then go through a
>> promotion pipeline?), so that might affect.
If the x86 images exist in registry.rdo, then the ppc64le (and any other architecture
image) should exist there as well. I can't think of a reason to differentiate between
architectures when the desired result is parity and support of more architectures.
>>
>> If we decide to upload the images to images.rdo, we'll need to do the
>
> Correction: this should read "registry.rdo"
>
>> following:
>>
>> - Create the tripleomaster-ppc64le namespace in registry.rdo, following a
>> similar pattern to [3].
>> - Schedule a short registry downtime to increase its disk space, since it is
>> currently near its limit.
This is definitely necessary, given the capacity requirement will double, give or take,
to support the additional architecture.
>> - Update the job at ci.centos to include the REGISTRY_PASSWORD environment
>> variable with the right token (see [4]). This is missing today, and causing
>> the job failure.
>>
>> Once we get input from all interested parties, we will decide on the next
>> steps.
>>
>> Thanks,
>> Javier
>>
>>
>> [1] -
>> https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
>> [2] -
>>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
>> [3] - https://review.rdoproject.org/r/19063
>> [4] -
>>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
>> _______________________________________________
>> dev mailing list
>> dev(a)lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/dev
>>
>> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
1:36 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Thu, Mar 21, 2019 at 12:20 PM Trevor Vardeman <tvardema(a)redhat.com>
wrote:
> On Mar 21, 2019, at 1:12 PM, Wesley Hayutin <whayutin(a)redhat.com> wrote:
>
>
>
> On Thu, Mar 21, 2019 at 12:03 PM Trevor Vardeman <tvardema(a)redhat.com>
wrote:
> I've been working with mjturek and baha on this a bit. I've responded
inline below, but also want to clarify on the desired workflow.
>
> TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly
integrated and uploaded. This can be done with docker manifest list images.
>
> The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
>
> The process boils down to the following steps:
>
> 1) Upload an image of the first architecture (ex:
image1:x86_64_01012019)
> 2) Upload an image of the second architecture (ex:
image1:ppc64le_01012019)
> 3) Upload manifest list image of the image (ex: image1:01012019)
>
>
> I think this is implying we upload x86_64, and PPC containers to the rdo
registry together. We specifically do NOT want to do that. One set of
images should not be blocked by the other at this stage of the testing.
That's not quite right, the images can be uploaded separately, but for the
manifest list image to function properly you'd need both images uploaded.
Also, as for the tagging, I wasn't suggesting a change to how images are
tagged save for potentially modifying it such that the manifest list image
is the default tag, versus the x86_64 image.
OK.. thanks Trevor for the explanation. Since you are executing in
ci.centos and not via Zuul I can see how you are having to readdress a lot
of the infrastructure bits like uploading to the registry.
If we can get you on the zuul platform you won't have to rework or redo at
least some of that work. In zuul we have some post playbooks that execute
after the build job [1]. I think you'll be able to find just about
everything we do w/ containers here [2] now.
Perhaps you can join the tripleo community sync on Tuesdays directly after
the TripleO upstream community meeting on #tripleo so we can get you
introduced to some folks who may not have met you yet.
Thanks
[1]
https://github.com/openstack-infra/tripleo-ci/blob/master/playbooks/tripl...
[2]
https://github.com/openstack-infra/tripleo-ci/tree/master/playbooks/tripl...
>
> I only just read through the manifest doc, so I may be misunderstanding
something.
> Any container built w/ tripleo should be tagged w/ the dlrn_hash used
while building so if we needed some containers from x86_64 and some from
PPC that should be relatively simple.
>
>
> Step 3 is essentially just pushing a JSON body that has descriptors and
references to the other two images, such that when someone does a pull
request of the manifest list image, it will gather the appropriate
architecture for that image based on the host's architecture.
>
> -Trevor
>
> PS. If I've missed something important with the overall concerns here I
apologize, but thought it necessary to spell out the goal as I understand
it.
>
> > On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi all,
> >>
> >> Over the last few weeks, mjturek and baha have been busy working on a
set of
> >> periodic jobs to build TripleO images for the ppc64le arch [1].
> >>
> >> The current missing step is publishing those images, and they are
proposing
> >> to push those to the RDO Registry instance at registry.rdoproject.org,
just
> >> like we do with our TripleO images. I have tried to understand the
> >> requirements, and would like to get input on the following topics:
> >>
> >> - Which namespace would these images use? Based on some logs [2] it
looks
> >> like they use tripleomaster-ppc64le, will they also push the images
to that
> >> namespace?
>
> I have no experience in namespaces inside of a registry or how that
differentiates images from one another, but the images should be pushed (in
my opinion) to the same location in which the x86 images reside.
>
> >> - Could this create any conflicts with our current promotion pipeline?
>
> This should not cause conflicts in current promotion pipeline, as the
process should be an extension to existing functionality.
>
> >> - Is registry.rdo the right place for those images? I'm not familiar
with the
> >> next steps for ppc64le images after that (will it then go through a
> >> promotion pipeline?), so that might affect.
>
> If the x86 images exist in registry.rdo, then the ppc64le (and any other
architecture image) should exist there as well. I can't think of a reason
to differentiate between architectures when the desired result is parity
and support of more architectures.
>
> >>
> >> If we decide to upload the images to images.rdo, we'll need to do the
> >
> > Correction: this should read "registry.rdo"
> >
> >> following:
> >>
> >> - Create the tripleomaster-ppc64le namespace in registry.rdo,
following a
> >> similar pattern to [3].
> >> - Schedule a short registry downtime to increase its disk space,
since it is
> >> currently near its limit.
>
> This is definitely necessary, given the capacity requirement will
double, give or take, to support the additional architecture.
>
> >> - Update the job at ci.centos to include the REGISTRY_PASSWORD
environment
> >> variable with the right token (see [4]). This is missing today, and
causing
> >> the job failure.
> >>
> >> Once we get input from all interested parties, we will decide on the
next
> >> steps.
> >>
> >> Thanks,
> >> Javier
> >>
> >>
> >> [1] -
> >>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> >> [2] -
> >>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> >> [3] - https://review.rdoproject.org/r/19063
> >> [4] -
> >>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> >> _______________________________________________
> >> dev mailing list
> >> dev(a)lists.rdoproject.org
> >> http://lists.rdoproject.org/mailman/listinfo/dev
> >>
> >> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
> >>
> > _______________________________________________
> > dev mailing list
> > dev(a)lists.rdoproject.org
> > http://lists.rdoproject.org/mailman/listinfo/dev
> >
> > To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
1:40 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Mar 21, 2019, at 1:36 PM, Wesley Hayutin
<whayutin(a)redhat.com> wrote:
On Thu, Mar 21, 2019 at 12:20 PM Trevor Vardeman <tvardema(a)redhat.com> wrote:
> On Mar 21, 2019, at 1:12 PM, Wesley Hayutin <whayutin(a)redhat.com> wrote:
>
>
>
> On Thu, Mar 21, 2019 at 12:03 PM Trevor Vardeman <tvardema(a)redhat.com> wrote:
> I've been working with mjturek and baha on this a bit. I've responded
inline below, but also want to clarify on the desired workflow.
>
> TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly integrated and
uploaded. This can be done with docker manifest list images.
>
> The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
>
> The process boils down to the following steps:
>
> 1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
> 2) Upload an image of the second architecture (ex: image1:ppc64le_01012019)
> 3) Upload manifest list image of the image (ex: image1:01012019)
>
>
> I think this is implying we upload x86_64, and PPC containers to the rdo registry
together. We specifically do NOT want to do that. One set of images should not be
blocked by the other at this stage of the testing.
That's not quite right, the images can be uploaded separately, but for the manifest
list image to function properly you'd need both images uploaded. Also, as for the
tagging, I wasn't suggesting a change to how images are tagged save for potentially
modifying it such that the manifest list image is the default tag, versus the x86_64
image.
OK.. thanks Trevor for the explanation. Since you are executing in ci.centos and not via
Zuul I can see how you are having to readdress a lot of the infrastructure bits like
uploading to the registry.
If we can get you on the zuul platform you won't have to rework or redo at least some
of that work. In zuul we have some post playbooks that execute after the build job [1]. I
think you'll be able to find just about everything we do w/ containers here [2] now.
Perhaps you can join the tripleo community sync on Tuesdays directly after the TripleO
upstream community meeting on #tripleo so we can get you introduced to some folks who may
not have met you yet.
I'll do exactly that, thanks for the information! Sorry if I was running in circles a
bit, my exposure has been relatively minimal. I'll do my best to join in next week
:)
Thanks
[1]
https://github.com/openstack-infra/tripleo-ci/blob/master/playbooks/tripl...
[2]
https://github.com/openstack-infra/tripleo-ci/tree/master/playbooks/tripl...
>
> I only just read through the manifest doc, so I may be misunderstanding something.
> Any container built w/ tripleo should be tagged w/ the dlrn_hash used while building
so if we needed some containers from x86_64 and some from PPC that should be relatively
simple.
>
>
> Step 3 is essentially just pushing a JSON body that has descriptors and references
to the other two images, such that when someone does a pull request of the manifest list
image, it will gather the appropriate architecture for that image based on the host's
architecture.
>
> -Trevor
>
> PS. If I've missed something important with the overall concerns here I
apologize, but thought it necessary to spell out the goal as I understand it.
>
> > On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi all,
> >>
> >> Over the last few weeks, mjturek and baha have been busy working on a set
of
> >> periodic jobs to build TripleO images for the ppc64le arch [1].
> >>
> >> The current missing step is publishing those images, and they are
proposing
> >> to push those to the RDO Registry instance at registry.rdoproject.org,
just
> >> like we do with our TripleO images. I have tried to understand the
> >> requirements, and would like to get input on the following topics:
> >>
> >> - Which namespace would these images use? Based on some logs [2] it looks
> >> like they use tripleomaster-ppc64le, will they also push the images to
that
> >> namespace?
>
> I have no experience in namespaces inside of a registry or how that differentiates
images from one another, but the images should be pushed (in my opinion) to the same
location in which the x86 images reside.
>
> >> - Could this create any conflicts with our current promotion pipeline?
>
> This should not cause conflicts in current promotion pipeline, as the process should
be an extension to existing functionality.
>
> >> - Is registry.rdo the right place for those images? I'm not familiar
with the
> >> next steps for ppc64le images after that (will it then go through a
> >> promotion pipeline?), so that might affect.
>
> If the x86 images exist in registry.rdo, then the ppc64le (and any other
architecture image) should exist there as well. I can't think of a reason to
differentiate between architectures when the desired result is parity and support of more
architectures.
>
> >>
> >> If we decide to upload the images to images.rdo, we'll need to do the
> >
> > Correction: this should read "registry.rdo"
> >
> >> following:
> >>
> >> - Create the tripleomaster-ppc64le namespace in registry.rdo, following a
> >> similar pattern to [3].
> >> - Schedule a short registry downtime to increase its disk space, since it
is
> >> currently near its limit.
>
> This is definitely necessary, given the capacity requirement will double, give or
take, to support the additional architecture.
>
> >> - Update the job at ci.centos to include the REGISTRY_PASSWORD environment
> >> variable with the right token (see [4]). This is missing today, and
causing
> >> the job failure.
> >>
> >> Once we get input from all interested parties, we will decide on the next
> >> steps.
> >>
> >> Thanks,
> >> Javier
> >>
> >>
> >> [1] -
> >>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> >> [2] -
> >>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> >> [3] - https://review.rdoproject.org/r/19063
> >> [4] -
> >>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> >> _______________________________________________
> >> dev mailing list
> >> dev(a)lists.rdoproject.org
> >> http://lists.rdoproject.org/mailman/listinfo/dev
> >>
> >> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
> >>
> > _______________________________________________
> > dev mailing list
> > dev(a)lists.rdoproject.org
> > http://lists.rdoproject.org/mailman/listinfo/dev
> >
> > To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
2:16 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
Hi Wes,
On 3/21/19 2:36 PM, Wesley Hayutin wrote:
On Thu, Mar 21, 2019 at 12:20 PM Trevor Vardeman <tvardema(a)redhat.com
<mailto:tvardema@redhat.com>> wrote:
> On Mar 21, 2019, at 1:12 PM, Wesley Hayutin <whayutin(a)redhat.com
<mailto:whayutin@redhat.com>> wrote:
>
>
>
> On Thu, Mar 21, 2019 at 12:03 PM Trevor Vardeman
<tvardema(a)redhat.com <mailto:tvardema@redhat.com>> wrote:
> I've been working with mjturek and baha on this a bit. I've
responded inline below, but also want to clarify on the desired
workflow.
>
> TL;DR: The desired workflow is to have ppc64le and x86_64
seamlessly integrated and uploaded. This can be done with docker
manifest list images.
>
> The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
>
> The process boils down to the following steps:
>
> 1) Upload an image of the first architecture (ex:
image1:x86_64_01012019)
> 2) Upload an image of the second architecture (ex:
image1:ppc64le_01012019)
> 3) Upload manifest list image of the image (ex: image1:01012019)
>
>
> I think this is implying we upload x86_64, and PPC containers to
the rdo registry together. We specifically do NOT want to do
that. One set of images should not be blocked by the other at
this stage of the testing.
That's not quite right, the images can be uploaded separately, but
for the manifest list image to function properly you'd need both
images uploaded. Also, as for the tagging, I wasn't suggesting a
change to how images are tagged save for potentially modifying it
such that the manifest list image is the default tag, versus the
x86_64 image.
OK.. thanks Trevor for the explanation. Since you are executing in
ci.centos and not via Zuul I can see how you are having to readdress a
lot of the infrastructure bits like uploading to the registry.
If we can get you on the zuul platform you won't have to rework or
redo at least some of that work. In zuul we have some post playbooks
that execute after the build job [1]. I think you'll be able to find
just about everything we do w/ containers here [2] now.
This is non-trivial as we do not have access to power hardware in RDO
CI. The reason we are using ci.centos is because it has access to cico,
which has ppc64le hardware to use.
Perhaps you can join the tripleo community sync on Tuesdays directly
after the TripleO upstream community meeting on #tripleo so we can get
you introduced to some folks who may not have met you yet.
Thanks
[1]
https://github.com/openstack-infra/tripleo-ci/blob/master/playbooks/tripl...
[2]
https://github.com/openstack-infra/tripleo-ci/tree/master/playbooks/tripl...
>
> I only just read through the manifest doc, so I may be
misunderstanding something.
> Any container built w/ tripleo should be tagged w/ the dlrn_hash
used while building so if we needed some containers from x86_64
and some from PPC that should be relatively simple.
>
>
> Step 3 is essentially just pushing a JSON body that has
descriptors and references to the other two images, such that when
someone does a pull request of the manifest list image, it will
gather the appropriate architecture for that image based on the
host's architecture.
>
> -Trevor
>
> PS. If I've missed something important with the overall concerns
here I apologize, but thought it necessary to spell out the goal
as I understand it.
>
> > On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com
<mailto:jpena@redhat.com>> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi all,
> >>
> >> Over the last few weeks, mjturek and baha have been busy
working on a set of
> >> periodic jobs to build TripleO images for the ppc64le arch [1].
> >>
> >> The current missing step is publishing those images, and they
are proposing
> >> to push those to the RDO Registry instance at
registry.rdoproject.org <http://registry.rdoproject.org>;, just
> >> like we do with our TripleO images. I have tried to
understand the
> >> requirements, and would like to get input on the following
topics:
> >>
> >> - Which namespace would these images use? Based on some logs
[2] it looks
> >> like they use tripleomaster-ppc64le, will they also push the
images to that
> >> namespace?
>
> I have no experience in namespaces inside of a registry or how
that differentiates images from one another, but the images should
be pushed (in my opinion) to the same location in which the x86
images reside.
>
> >> - Could this create any conflicts with our current promotion
pipeline?
>
> This should not cause conflicts in current promotion pipeline,
as the process should be an extension to existing functionality.
>
> >> - Is registry.rdo the right place for those images? I'm not
familiar with the
> >> next steps for ppc64le images after that (will it then go
through a
> >> promotion pipeline?), so that might affect.
>
> If the x86 images exist in registry.rdo, then the ppc64le (and
any other architecture image) should exist there as well. I can't
think of a reason to differentiate between architectures when the
desired result is parity and support of more architectures.
>
> >>
> >> If we decide to upload the images to images.rdo, we'll need
to do the
> >
> > Correction: this should read "registry.rdo"
> >
> >> following:
> >>
> >> - Create the tripleomaster-ppc64le namespace in registry.rdo,
following a
> >> similar pattern to [3].
> >> - Schedule a short registry downtime to increase its disk
space, since it is
> >> currently near its limit.
>
> This is definitely necessary, given the capacity requirement
will double, give or take, to support the additional architecture.
>
> >> - Update the job at ci.centos to include the
REGISTRY_PASSWORD environment
> >> variable with the right token (see [4]). This is missing
today, and causing
> >> the job failure.
> >>
> >> Once we get input from all interested parties, we will decide
on the next
> >> steps.
> >>
> >> Thanks,
> >> Javier
> >>
> >>
> >> [1] -
> >>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> >> [2] -
> >>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> >> [3] - https://review.rdoproject.org/r/19063
> >> [4] -
> >>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> >> _______________________________________________
> >> dev mailing list
> >> dev(a)lists.rdoproject.org <mailto:dev@lists.rdoproject.org>
> >> http://lists.rdoproject.org/mailman/listinfo/dev
> >>
> >> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
<mailto:dev-unsubscribe@lists.rdoproject.org>
> >>
> > _______________________________________________
> > dev mailing list
> > dev(a)lists.rdoproject.org <mailto:dev@lists.rdoproject.org>
> > http://lists.rdoproject.org/mailman/listinfo/dev
> >
> > To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
<mailto:dev-unsubscribe@lists.rdoproject.org>
>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org <mailto:dev@lists.rdoproject.org>
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
<mailto:dev-unsubscribe@lists.rdoproject.org>
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
3:58 p.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
> If we can get you on the zuul platform you won't have to
rework or redo at least some of that work. In zuul we have some post playbooks that
execute after the build job [1]. I think you'll be able to find just about everything
we do w/ containers here [2] now.
This is non-trivial as we do not have access to power hardware in RDO CI. The reason we
are using ci.centos is because it has access to cico, which has ppc64le hardware to use.
Just thinking aloud w/o much clue: maybe we could have a nodepool
driver for cico nodes, if they can be accessed from the outside via
jumphost?
Cheers,
Alan
4:35 a.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
----- Original Message -----
I've been working with mjturek and baha on this a bit. I've
responded inline
below, but also want to clarify on the desired workflow.
TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly
integrated and uploaded. This can be done with docker manifest list images.
The following link explains in greater detail:
https://docs.docker.com/registry/spec/manifest-v2-2/
The process boils down to the following steps:
1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
2) Upload an image of the second architecture (ex: image1:ppc64le_01012019)
3) Upload manifest list image of the image (ex: image1:01012019)
This is one of the details where I had my doubts. Currently, the images uploaded to the
registry use the following naming convention:
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40
Where:
- tripleomaster is associated to the release (we have tripleomaster, tripleostein,
tripleorocky...)
- centos is associated to the OS (we have centos and fedora)
- 42a882962919b867c91a182b83acca6d8004096e_ee467b40 refers to the repository in
trunk.rdoproject.org used to build the image (commit hash and short distro hash)
If we want to go multi-arch, we need to change that tag to include the architecture, is
this correct? Otherwise, we could have conflicts between the x86_64 and ppc64le pipelines
trying to upload the same image.
Regards,
Javier
Step 3 is essentially just pushing a JSON body that has descriptors
and
references to the other two images, such that when someone does a pull
request of the manifest list image, it will gather the appropriate
architecture for that image based on the host's architecture.
-Trevor
PS. If I've missed something important with the overall concerns here I
apologize, but thought it necessary to spell out the goal as I understand
it.
> On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
>
>
> ----- Original Message -----
>> Hi all,
>>
>> Over the last few weeks, mjturek and baha have been busy working on a set
>> of
>> periodic jobs to build TripleO images for the ppc64le arch [1].
>>
>> The current missing step is publishing those images, and they are
>> proposing
>> to push those to the RDO Registry instance at registry.rdoproject.org,
>> just
>> like we do with our TripleO images. I have tried to understand the
>> requirements, and would like to get input on the following topics:
>>
>> - Which namespace would these images use? Based on some logs [2] it looks
>> like they use tripleomaster-ppc64le, will they also push the images to
>> that
>> namespace?
I have no experience in namespaces inside of a registry or how that
differentiates images from one another, but the images should be pushed (in
my opinion) to the same location in which the x86 images reside.
>> - Could this create any conflicts with our current promotion pipeline?
This should not cause conflicts in current promotion pipeline, as the process
should be an extension to existing functionality.
>> - Is registry.rdo the right place for those images? I'm not familiar with
>> the
>> next steps for ppc64le images after that (will it then go through a
>> promotion pipeline?), so that might affect.
If the x86 images exist in registry.rdo, then the ppc64le (and any other
architecture image) should exist there as well. I can't think of a reason
to differentiate between architectures when the desired result is parity and
support of more architectures.
>>
>> If we decide to upload the images to images.rdo, we'll need to do the
>
> Correction: this should read "registry.rdo"
>
>> following:
>>
>> - Create the tripleomaster-ppc64le namespace in registry.rdo, following a
>> similar pattern to [3].
>> - Schedule a short registry downtime to increase its disk space, since it
>> is
>> currently near its limit.
This is definitely necessary, given the capacity requirement will double,
give or take, to support the additional architecture.
>> - Update the job at ci.centos to include the REGISTRY_PASSWORD environment
>> variable with the right token (see [4]). This is missing today, and
>> causing
>> the job failure.
>>
>> Once we get input from all interested parties, we will decide on the next
>> steps.
>>
>> Thanks,
>> Javier
>>
>>
>> [1] -
>> https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
>> [2] -
>>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
>> [3] - https://review.rdoproject.org/r/19063
>> [4] -
>>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
>> _______________________________________________
>> dev mailing list
>> dev(a)lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/dev
>>
>> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
8:46 a.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Fri, Mar 22, 2019 at 3:36 AM Javier Pena <jpena(a)redhat.com> wrote:
----- Original Message -----
> I've been working with mjturek and baha on this a bit. I've responded
inline
> below, but also want to clarify on the desired workflow.
>
> TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly
> integrated and uploaded. This can be done with docker manifest list
images.
>
> The following link explains in greater detail:
> https://docs.docker.com/registry/spec/manifest-v2-2/
>
> The process boils down to the following steps:
>
> 1) Upload an image of the first architecture (ex:
image1:x86_64_01012019)
> 2) Upload an image of the second architecture (ex:
image1:ppc64le_01012019)
> 3) Upload manifest list image of the image (ex: image1:01012019)
>
This is one of the details where I had my doubts. Currently, the images
uploaded to the registry use the following naming convention:
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40
Where:
- tripleomaster is associated to the release (we have tripleomaster,
tripleostein, tripleorocky...)
- centos is associated to the OS (we have centos and fedora)
- 42a882962919b867c91a182b83acca6d8004096e_ee467b40 refers to the
repository in trunk.rdoproject.org used to build the image (commit hash
and short distro hash)
If we want to go multi-arch, we need to change that tag to include the
architecture, is this correct? Otherwise, we could have conflicts between
the x86_64 and ppc64le pipelines trying to upload the same image.
Regards,
Javier
Right.. I'm agreeing w/ you..
I'm recommending the following change
tripleomaster -> tripleomaster_x86_64
and add
tripleomaster_ppc64le
> Step 3 is essentially just pushing a JSON body that has descriptors and
> references to the other two images, such that when someone does a pull
> request of the manifest list image, it will gather the appropriate
> architecture for that image based on the host's architecture.
>
> -Trevor
>
> PS. If I've missed something important with the overall concerns here I
> apologize, but thought it necessary to spell out the goal as I understand
> it.
>
> > On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi all,
> >>
> >> Over the last few weeks, mjturek and baha have been busy working on a
set
> >> of
> >> periodic jobs to build TripleO images for the ppc64le arch [1].
> >>
> >> The current missing step is publishing those images, and they are
> >> proposing
> >> to push those to the RDO Registry instance at registry.rdoproject.org
,
> >> just
> >> like we do with our TripleO images. I have tried to understand the
> >> requirements, and would like to get input on the following topics:
> >>
> >> - Which namespace would these images use? Based on some logs [2] it
looks
> >> like they use tripleomaster-ppc64le, will they also push the images to
> >> that
> >> namespace?
>
> I have no experience in namespaces inside of a registry or how that
> differentiates images from one another, but the images should be pushed
(in
> my opinion) to the same location in which the x86 images reside.
>
> >> - Could this create any conflicts with our current promotion pipeline?
>
> This should not cause conflicts in current promotion pipeline, as the
process
> should be an extension to existing functionality.
>
> >> - Is registry.rdo the right place for those images? I'm not familiar
with
> >> the
> >> next steps for ppc64le images after that (will it then go through a
> >> promotion pipeline?), so that might affect.
>
> If the x86 images exist in registry.rdo, then the ppc64le (and any other
> architecture image) should exist there as well. I can't think of a
reason
> to differentiate between architectures when the desired result is parity
and
> support of more architectures.
>
> >>
> >> If we decide to upload the images to images.rdo, we'll need to do the
> >
> > Correction: this should read "registry.rdo"
> >
> >> following:
> >>
> >> - Create the tripleomaster-ppc64le namespace in registry.rdo,
following a
> >> similar pattern to [3].
> >> - Schedule a short registry downtime to increase its disk space,
since it
> >> is
> >> currently near its limit.
>
> This is definitely necessary, given the capacity requirement will double,
> give or take, to support the additional architecture.
>
> >> - Update the job at ci.centos to include the REGISTRY_PASSWORD
environment
> >> variable with the right token (see [4]). This is missing today, and
> >> causing
> >> the job failure.
> >>
> >> Once we get input from all interested parties, we will decide on the
next
> >> steps.
> >>
> >> Thanks,
> >> Javier
> >>
> >>
> >> [1] -
> >>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> >> [2] -
> >>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> >> [3] - https://review.rdoproject.org/r/19063
> >> [4] -
> >>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> >> _______________________________________________
> >> dev mailing list
> >> dev(a)lists.rdoproject.org
> >> http://lists.rdoproject.org/mailman/listinfo/dev
> >>
> >> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
> >>
> > _______________________________________________
> > dev mailing list
> > dev(a)lists.rdoproject.org
> > http://lists.rdoproject.org/mailman/listinfo/dev
> >
> > To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
11:45 a.m.
New subject: [infra][tripleoci] ppc64le container images in registry.rdoproject.org
On Mar 22, 2019, at 8:46 AM, Wesley Hayutin
<whayutin(a)redhat.com> wrote:
On Fri, Mar 22, 2019 at 3:36 AM Javier Pena <jpena(a)redhat.com> wrote:
----- Original Message -----
> I've been working with mjturek and baha on this a bit. I've responded
inline
> below, but also want to clarify on the desired workflow.
>
> TL;DR: The desired workflow is to have ppc64le and x86_64 seamlessly
> integrated and uploaded. This can be done with docker manifest list images.
>
> The following link explains in greater detail:
> https://docs.docker.com/registry/spec/manifest-v2-2/
>
> The process boils down to the following steps:
>
> 1) Upload an image of the first architecture (ex: image1:x86_64_01012019)
> 2) Upload an image of the second architecture (ex: image1:ppc64le_01012019)
> 3) Upload manifest list image of the image (ex: image1:01012019)
>
This is one of the details where I had my doubts. Currently, the images uploaded to the
registry use the following naming convention:
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40
Where:
- tripleomaster is associated to the release (we have tripleomaster, tripleostein,
tripleorocky...)
- centos is associated to the OS (we have centos and fedora)
- 42a882962919b867c91a182b83acca6d8004096e_ee467b40 refers to the repository in
trunk.rdoproject.org used to build the image (commit hash and short distro hash)
If we want to go multi-arch, we need to change that tag to include the architecture, is
this correct? Otherwise, we could have conflicts between the x86_64 and ppc64le pipelines
trying to upload the same image.
Regards,
Javier
Right.. I'm agreeing w/ you..
I'm recommending the following change
tripleomaster -> tripleomaster_x86_64
and add
tripleomaster_ppc64le
I'm not sure if I'm getting the right information here, but from what I
understand, a namespace is just a separate repo inside the same image registry, is that
right? I'm not sure if manifest list images can be created between images in
different namespaces, but if its possible, that's how things *should* be done.
I'm not advocating for it to be done this way immediately (unless the changes turn out
to be relatively trivial), but it should be the end goal of making this multiarch aware.
To explain: the suggested change to putting specific architecture images in their own
separate namespaces might not be a problem, assuming a manifest list image can be set up
across namespaces. However, if that's not possible, then we should append (or
prepend) the architecture to the tag, and create the manifest list image with the original
name that has no architecture described. This would extend existing functionality within
the registry itself, and allow for a seamless transition to the consumers of these
images.
The final list of images would be as follows:
x86_64 specific image:
-
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40_x86_64
ppc64le specific image:
-
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40_ppc64le
manifest list image:
-
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40
So the consumer would do "docker pull
tripleomaster/centos-binary-neutron-l3-agent:42a882962919b867c91a182b83acca6d8004096e_ee467b40"
and it would automatically retrieve the appropriate architecture image based on the host
machine's architecture.
*IF* manifest list images can span across namespaces, all you'd have to do is move
those architecture tags to the namespace definition, and you could *still* use the same
manifest list image definition above and it would work the same way.
-Trevor
> Step 3 is essentially just pushing a JSON body that has descriptors and
> references to the other two images, such that when someone does a pull
> request of the manifest list image, it will gather the appropriate
> architecture for that image based on the host's architecture.
>
> -Trevor
>
> PS. If I've missed something important with the overall concerns here I
> apologize, but thought it necessary to spell out the goal as I understand
> it.
>
> > On Mar 21, 2019, at 12:28 PM, Javier Pena <jpena(a)redhat.com> wrote:
> >
> >
> > ----- Original Message -----
> >> Hi all,
> >>
> >> Over the last few weeks, mjturek and baha have been busy working on a set
> >> of
> >> periodic jobs to build TripleO images for the ppc64le arch [1].
> >>
> >> The current missing step is publishing those images, and they are
> >> proposing
> >> to push those to the RDO Registry instance at registry.rdoproject.org,
> >> just
> >> like we do with our TripleO images. I have tried to understand the
> >> requirements, and would like to get input on the following topics:
> >>
> >> - Which namespace would these images use? Based on some logs [2] it looks
> >> like they use tripleomaster-ppc64le, will they also push the images to
> >> that
> >> namespace?
>
> I have no experience in namespaces inside of a registry or how that
> differentiates images from one another, but the images should be pushed (in
> my opinion) to the same location in which the x86 images reside.
>
> >> - Could this create any conflicts with our current promotion pipeline?
>
> This should not cause conflicts in current promotion pipeline, as the process
> should be an extension to existing functionality.
>
> >> - Is registry.rdo the right place for those images? I'm not familiar
with
> >> the
> >> next steps for ppc64le images after that (will it then go through a
> >> promotion pipeline?), so that might affect.
>
> If the x86 images exist in registry.rdo, then the ppc64le (and any other
> architecture image) should exist there as well. I can't think of a reason
> to differentiate between architectures when the desired result is parity and
> support of more architectures.
>
> >>
> >> If we decide to upload the images to images.rdo, we'll need to do the
> >
> > Correction: this should read "registry.rdo"
> >
> >> following:
> >>
> >> - Create the tripleomaster-ppc64le namespace in registry.rdo, following a
> >> similar pattern to [3].
> >> - Schedule a short registry downtime to increase its disk space, since it
> >> is
> >> currently near its limit.
>
> This is definitely necessary, given the capacity requirement will double,
> give or take, to support the additional architecture.
>
> >> - Update the job at ci.centos to include the REGISTRY_PASSWORD environment
> >> variable with the right token (see [4]). This is missing today, and
> >> causing
> >> the job failure.
> >>
> >> Once we get input from all interested parties, we will decide on the next
> >> steps.
> >>
> >> Thanks,
> >> Javier
> >>
> >>
> >> [1] -
> >>
https://ci.centos.org/job/tripleo-upstream-containers-build-master-ppc64le/
> >> [2] -
> >>
https://centos.logs.rdoproject.org/tripleo-upstream-containers-build-mast...
> >> [3] - https://review.rdoproject.org/r/19063
> >> [4] -
> >>
https://github.com/rdo-infra/review.rdoproject.org-config/blob/master/pla...
> >> _______________________________________________
> >> dev mailing list
> >> dev(a)lists.rdoproject.org
> >> http://lists.rdoproject.org/mailman/listinfo/dev
> >>
> >> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
> >>
> > _______________________________________________
> > dev mailing list
> > dev(a)lists.rdoproject.org
> > http://lists.rdoproject.org/mailman/listinfo/dev
> >
> > To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
> _______________________________________________
> dev mailing list
> dev(a)lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/dev
>
> To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
>
_______________________________________________
dev mailing list
dev(a)lists.rdoproject.org
http://lists.rdoproject.org/mailman/listinfo/dev
To unsubscribe: dev-unsubscribe(a)lists.rdoproject.org
1861
days inactive
1862
days old
9 comments
5 participants
participants (5)
-
Alan Pevec -
Javier Pena -
Michael Turek -
Trevor Vardeman -
Wesley Hayutin