4:12 p.m.
If you see the biginning of the cloud ini: you 'll find out that i
configured a wordpress repo on a web server: 192.168.5.105/repos/wordpress.
and normaly my vm should download the packages from that repos. But, I
don't know why it doesn't
Towards the end of the log is the following:
cloud-init[922]: No package wordpress available.
The main Fedora repository includes wordpress, but the CentOS one does
not. You will either need to add the CentOS EPEL repository in your boot
script, or switch to a Fedora cloud image.
On 03/06/15 08:06, ICHIBA Sara wrote:
> Hello there,
>
> Lately i was trying to make work the autoscaling.yaml template. So I
> installed a web server and uploaded the wordpress repo . when I launch
> my template with heat, and take a look at the log of the web server
> and the db server launched with heat I found these errors. Can you
> tell me what I can do to fix them? below the logs and attached the
> temmplate I use
>
> ====> database server log
> cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
15:47:39 +0000. Up 9.78 seconds.
> cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
info++++++++++++++++++++++++++
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | Device | Up | Address | Mask
| Hw-Address |
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
| . |
> cloud-init[728]: ci-info: | eth0: | True | 20.0.0.169 | 255.255.255.0 |
fa:16:3e:f3:f2:25 |
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
info++++++++++++++++++++++++++++++
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
| Interface | Flags |
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
| eth0 | UG |
> cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
255.255.255.0 | eth0 | U |
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
>
> CentOS Linux 7 (Core)
> Kernel 3.10.0-229.el7.x86_64 on an x86_64
>
> host-20-0-0-169 login: cloud-init[901]: Cloud-init v. 0.7.5 running
'modules:config' at Tue, 02 Jun 2015 15:47:44 +0000. Up 15.32 seconds.
> cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
Jun 2015 15:47:45 +0000. Up 15.87 seconds.
> cloud-init[922]: #!/bin/bash -v
> cloud-init[922]: cat << EOF > /etc/resolv.conf
> cloud-init[922]: nameserver 8.8.8.8
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install firewalld
> cloud-init[922]: Loaded plugins: fastestmirror
> cloud-init[922]: Determining fastest mirrors
> cloud-init[922]: * base:centos.quelquesmots.fr <
http://centos.quelquesmots.fr/>
> cloud-init[922]: * extras:centos.mirrors.ovh.net <
http://centos.mirrors.ovh.net/>
> cloud-init[922]: * updates:centos.quelquesmots.fr <
http://centos.quelquesmots.fr/>
> cloud-init[922]: Resolving Dependencies
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package firewalld.noarch 0:0.3.9-11.el7 will be
installed
> cloud-init[922]: --> Processing Dependency: python-slip-dbus for
package: firewalld-0.3.9-11.el7.noarch
> cloud-init[922]: --> Processing Dependency: ebtables for package:
firewalld-0.3.9-11.el7.noarch
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package ebtables.x86_64 0:2.0.10-13.el7 will be
installed
> cloud-init[922]: ---> Package python-slip-dbus.noarch 0:0.4.0-2.el7 will
be installed
> cloud-init[922]: --> Processing Dependency: python-slip = 0.4.0-2.el7
for package: python-slip-dbus-0.4.0-2.el7.noarch
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package python-slip.noarch 0:0.4.0-2.el7 will be
installed
> cloud-init[922]: --> Finished Dependency Resolution
> cloud-init[922]: Dependencies Resolved
> cloud-init[922]:
================================================================================
> cloud-init[922]: Package Arch Version
Repository Size
> cloud-init[922]:
================================================================================
> cloud-init[922]: Installing:
> cloud-init[922]: firewalld noarch 0.3.9-11.el7
base 465 k
> cloud-init[922]: Installing for dependencies:
> cloud-init[922]: ebtables x86_64 2.0.10-13.el7
base 122 k
> cloud-init[922]: python-slip noarch 0.4.0-2.el7
base 30 k
> cloud-init[922]: python-slip-dbus noarch 0.4.0-2.el7
base 31 k
> cloud-init[922]: Transaction Summary
> cloud-init[922]:
================================================================================
> cloud-init[922]: Install 1 Package (+3 Dependent packages)
> cloud-init[922]: Total download size: 649 k
> cloud-init[922]: Installed size: 2.8 M
> cloud-init[922]: Downloading packages:
> cloud-init[922]: warning:
/var/cache/yum/x86_64/7/base/packages/python-slip-0.4.0-2.el7.noarch.rpm:
Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> cloud-init[922]: Public key for python-slip-0.4.0-2.el7.noarch.rpm is
not installed
> cloud-init[922]:
--------------------------------------------------------------------------------
> cloud-init[922]: Total 462
kB/s | 649 kB 00:01
> cloud-init[922]: Retrieving key from
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Importing GPG key 0xF4A80EB5:
> cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
Key) <security(a)centos.org <mailto:security@centos.org>>"
> cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
f4a8 0eb5
> cloud-init[922]: Package :
centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Running transaction check
> cloud-init[922]: Running transaction test
> cloud-init[922]: Transaction test succeeded
> cloud-init[922]: Running transaction
> cloud-init[922]: Installing : python-slip-0.4.0-2.el7.noarch
1/4
> cloud-init[922]: Installing : python-slip-dbus-0.4.0-2.el7.noarch
2/4
> cloud-init[922]: Installing : ebtables-2.0.10-13.el7.x86_64
3/4
> cloud-init[922]: Installing : firewalld-0.3.9-11.el7.noarch
4/4
> cloud-init[922]: Verifying : firewalld-0.3.9-11.el7.noarch
1/4
> cloud-init[922]: Verifying : python-slip-dbus-0.4.0-2.el7.noarch
2/4
> cloud-init[922]: Verifying : ebtables-2.0.10-13.el7.x86_64
3/4
> cloud-init[922]: Verifying : python-slip-0.4.0-2.el7.noarch
4/4
> cloud-init[922]: Installed:
> cloud-init[922]: firewalld.noarch 0:0.3.9-11.el7
> cloud-init[922]: Dependency Installed:
> cloud-init[922]: ebtables.x86_64 0:2.0.10-13.el7
python-slip.noarch 0:0.4.0-2.el7
> cloud-init[922]: python-slip-dbus.noarch 0:0.4.0-2.el7
> cloud-init[922]: Complete!
> cloud-init[922]: systemctl start firewalld
> Starting firewalld - dynamic firewall daemon...
> [ 37.378596] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 37.429522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 37.491387] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 37.539733] Ebtables v2.0 registered
> [ 37.572087] Bridge firewalling registered
> [[32m OK [0m] Started firewalld - dynamic firewall daemon.
> cloud-init[922]: systemctl enable firewalld
> cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> [ 40.564139] Adjusting kvm-clock more than 11% (9437184 vs 9311354)
> cloud-init[922]: ERROR:dbus.proxies:Introspect error on
:1.6:/org/fedoraproject/FirewallD1: dbus.exceptions.DBusException:
org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
causes include: the remote application did not send a reply, the message
bus security policy blocked the reply, the reply timeout expired, or the
network connection was broken.
> Starting Authorization Manager...
> [[32m OK [0m] Started Authorization Manager.
> [[32m OK [0m] Created slice user-0.slice.
> Starting Cleanup of Temporary Directories...
> [[32m OK [0m] Started Cleanup of Temporary Directories.
> ===>web-server log
> cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
16:01:42 +0000. Up 12.17 seconds.
> cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
info++++++++++++++++++++++++++
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | Device | Up | Address | Mask
| Hw-Address |
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
| . |
> cloud-init[728]: ci-info: | eth0: | True | 20.0.0.172 | 255.255.255.0 |
fa:16:3e:61:e9:0e |
> cloud-init[728]: ci-info:
+--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
info++++++++++++++++++++++++++++++
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
| Interface | Flags |
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
| eth0 | UG |
> cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
255.255.255.0 | eth0 | U |
> cloud-init[728]: ci-info:
+-------+-------------+----------+---------------+-----------+-------+
>
> CentOS Linux 7 (Core)
> Kernel 3.10.0-229.el7.x86_64 on an x86_64
>
> host-20-0-0-172 login: cloud-init[901]: Cloud-init v. 0.7.5 running
'modules:config' at Tue, 02 Jun 2015 16:01:47 +0000. Up 16.92 seconds.
> cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
Jun 2015 16:01:47 +0000. Up 17.53 seconds.
> cloud-init[922]: #!/bin/bash -v
> cloud-init[922]: cat << EOF > /etc/resolv.conf
> cloud-init[922]: nameserver 8.8.8.8
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install firewalld
> cloud-init[922]: systemctl start firewalld
> cloud-init[922]: systemctl enable firewalld
> cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> cloud-init[922]: firewall-cmd --permanent --add-port=80/tcp
> cloud-init[922]: firewall-cmd --permanent --add-port=443/tcp
> cloud-init[922]: firewall-cmd --reload
> cloud-init[922]: cat << EOF >> /etc/yum.repos.d/rhel.repo
> cloud-init[922]: [rhel-7-server-rpms]
> cloud-init[922]: name=rhel-7-server-rpms
> cloud-init[922]: baseurl=http://172.16.0.129:81/repos/rhel-7-server-rpms
> cloud-init[922] <
http://172.16.0.129:81/repos/rhel-7-server-rpmscloud-init%5B922%5D>;:
gpgcheck=0
> cloud-init[922]: enabled=1
> cloud-init[922]: [wordpress]
> cloud-init[922]: name=wordpress
> cloud-init[922]: baseurl=http://192.168.5.105:80/repos/wordpress
> cloud-init[922] <
http://192.168.5.105:80/repos/wordpresscloud-init%5B922%5D>;: gpgcheck=0
> cloud-init[922]: enabled=1
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install httpd wordpress
> cloud-init[922]: Loaded plugins: fastestmirror
> cloud-init[922]: Determining fastest mirrors
> cloud-init[922]: * base:centos.crazyfrogs.org <
http://centos.crazyfrogs.org>
> cloud-init[922]: * extras:centos.crazyfrogs.org <
http://centos.crazyfrogs.org>
> cloud-init[922]: * updates:centos.crazyfrogs.org <
http://centos.crazyfrogs.org>
> cloud-init[922]: No package wordpress available.
> cloud-init[922]: Resolving Dependencies
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package httpd.x86_64 0:2.4.6-31.el7.centos will be
installed
> cloud-init[922]: --> Processing Dependency: httpd-tools =
2.4.6-31.el7.centos for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: /etc/mime.types for package:
httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: libaprutil-1.so.0()(64bit)
for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: libapr-1.so.0()(64bit) for
package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
> cloud-init[922]: ---> Package apr-util.x86_64 0:1.5.2-6.el7 will be
installed
> cloud-init[922]: ---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos
will be installed
> cloud-init[922]: ---> Package mailcap.noarch 0:2.1.41-2.el7 will be
installed
> cloud-init[922]: --> Finished Dependency Resolution
> cloud-init[922]: Dependencies Resolved
> cloud-init[922]:
================================================================================
> cloud-init[922]: Package Arch Version
Repository Size
> cloud-init[922]:
================================================================================
> cloud-init[922]: Installing:
> cloud-init[922]: httpd x86_64 2.4.6-31.el7.centos
base 2.7 M
> cloud-init[922]: Installing for dependencies:
> cloud-init[922]: apr x86_64 1.4.8-3.el7
base 103 k
> cloud-init[922]: apr-util x86_64 1.5.2-6.el7
base 92 k
> cloud-init[922]: httpd-tools x86_64 2.4.6-31.el7.centos
base 79 k
> cloud-init[922]: mailcap noarch 2.1.41-2.el7
base 31 k
> cloud-init[922]: Transaction Summary
> cloud-init[922]:
================================================================================
> cloud-init[922]: Install 1 Package (+4 Dependent packages)
> cloud-init[922]: Total download size: 3.0 M
> cloud-init[922]: Installed size: 10 M
> cloud-init[922]: Downloading packages:
> cloud-init[922]: warning:
/var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3
RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> cloud-init[922]: Public key for apr-1.4.8-3.el7.x86_64.rpm is not
installed
> cloud-init[922]:
--------------------------------------------------------------------------------
> cloud-init[922]: Total 949
kB/s | 3.0 MB 00:03
> cloud-init[922]: Retrieving key from
file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Importing GPG key 0xF4A80EB5:
> cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
Key) <security(a)centos.org <mailto:security@centos.org>>"
> cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
f4a8 0eb5
> cloud-init[922]: Package :
centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Running transaction check
> cloud-init[922]: Running transaction test
> cloud-init[922]: Transaction test succeeded
> cloud-init[922]: Running transaction
> cloud-init[922]: Installing : apr-1.4.8-3.el7.x86_64
1/5
> cloud-init[922]: Installing : apr-util-1.5.2-6.el7.x86_64
2/5
> cloud-init[922]: Installing : httpd-tools-2.4.6-31.el7.centos.x86_64
3/5
> cloud-init[922]: Installing : mailcap-2.1.41-2.el7.noarch
4/5
> cloud-init[922]: Installing : httpd-2.4.6-31.el7.centos.x86_64
5/5
> cloud-init[922]: Verifying : httpd-tools-2.4.6-31.el7.centos.x86_64
1/5
> cloud-init[922]: Verifying : apr-1.4.8-3.el7.x86_64
2/5
> cloud-init[922]: Verifying : mailcap-2.1.41-2.el7.noarch
3/5
> cloud-init[922]: Verifying : httpd-2.4.6-31.el7.centos.x86_64
4/5
> cloud-init[922]: Verifying : apr-util-1.5.2-6.el7.x86_64
5/5
> cloud-init[922]: Installed:
> cloud-init[922]: httpd.x86_64 0:2.4.6-31.el7.centos
> cloud-init[922]: Dependency Installed:
> cloud-init[922]: apr.x86_64 0:1.4.8-3.el7
apr-util.x86_64 0:1.5.2-6.el7
> cloud-init[922]: httpd-tools.x86_64 0:2.4.6-31.el7.centos
mailcap.noarch 0:2.1.41-2.el7
> cloud-init[922]: Complete!
> cloud-init[922]: systemctl start httpd.service
> Starting The Apache HTTP Server...
> [[32m OK [0m] Started The Apache HTTP Server.
> cloud-init[922]: systemctl enable httpd.service
> cloud-init[922]: ln -s '/usr/lib/systemd/system/httpd.service'
'/etc/systemd/system/multi-user.target.wants/httpd.service'
> cloud-init[922]: setsebool -P httpd_can_network_connect_db=1
> cloud-init[922]: sed -i "/Deny from All/d"
/etc/httpd/conf.d/wordpress.conf
> cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
such file or directory
> cloud-init[922]: sed -i "s/Require local/Require all granted/"
/etc/httpd/conf.d/wordpress.conf
> cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
such file or directory
> cloud-init[922]: sed -i s/database_name_here/wordpress/
/etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
file or directory
> cloud-init[922]: sed -i s/username_here/wordpress/
/etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
file or directory
> cloud-init[922]: sed -i
s/password_here/GJM76RbvIje4C7eh2aOdlQQedqvxjBH2/
/etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
file or directory
> cloud-init[922]: sed -i s/localhost/20.0.0.68/ <http://20.0.0.68/>
/etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
file or directory
> cloud-init[922]: systemctl restart httpd.service
> Stopping The Apache HTTP Server...
> [[32m OK [0m] Stopped The Apache HTTP Server.
> Starting The Apache HTTP Server...
> [[32m OK [0m] Started The Apache HTTP Server.
> ci-info: ++++++++++Authorized keys from
/home/centos/.ssh/authorized_keys for user centos+++++++++++
> ci-info:
+---------+-------------------------------------------------+---------+-------------------+
> ci-info: | Keytype | Fingerprint (md5) |
Options | Comment |
> ci-info:
+---------+-------------------------------------------------+---------+-------------------+
> ci-info: | ssh-rsa | 2d:b8:76:2f:ab:f5:f1:72:f8:75:46:00:f9:d3:24:60 |
- | Generated-by-Nova |
> ci-info:
+---------+-------------------------------------------------+---------+-------------------+
> ec2:
> ec2: #############################################################
> ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
> ec2: 256 88:ab:b1:ac:08:d9:70:41:f2:04:14:a3:1a:4d:02:fe (ECDSA)
> ec2: 256 0e:3e:9b:d5:4b:cb:c9:78:c7:99:a4:bf:05:0d:7a:a8 (ED25519)
> ec2: 2048 f2:f8:e5:70:d1:f4:f0:57:ea:9c:d1:75:f3:75:17:22 (RSA)
> ec2: -----END SSH HOST KEY FINGERPRINTS-----
> ec2: #############################################################
> -----BEGIN SSH HOST KEY KEYS-----
> ecdsa-sha2-nistp256
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCXquFpCyVkwLlWJ81GozEjViYP41EELARbVt5ISfsRCDNGk31bsGmgy7ecjg7g1LRtTxTs0OWJ3Hy2fZhio1KQ=
> ssh-ed25519
AAAAC3NzaC1lZDI1NTE5AAAAICORDKYmglupDLdv8Cj5ut14BpD65Grm8p0SQDifMans
> ssh-rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQDTQjdbT8OCAnmV5bbO/llks+2E26pajgS9ZortTLKOGQp9KmYMIq9CXjUWQjmn+vlFMPkyMk4DG9K/XDX3WRXgErNUpIsmJPUMOnoyxz4U+dYCOSm7pUfoyQphvqxGzkzC/UMwHYcakSpUssLUY85ZcoIz9HmaNTkiiHoJe/ezvjVrAAAcOViYL2qcOATf7MfNqkyqJlk65O7k5pf3+RFh9ta1rijubzaHfBZxKiQfVeJV61vwmF6tBONDOlC/BVSI+k/zg0Evsn+5uKPlhsoeB5uSr1DxTSdBYn3yrHcqceEtgh2uiwhS7prvU911KfRjkf+PwGvtDg9iLlAuJioV
> -----END SSH HOST KEY KEYS-----
> cloud-init[922]: Cloud-init v. 0.7.5 finished at Tue, 02 Jun 2015
16:02:31 +0000. Datasource DataSourceOpenStack [net,ver=2]. Up 60.92
seconds
> [[32m OK [0m] Started Execute cloud user/final scripts.
> [[32m OK [0m] Reached target Multi-User System.
>
>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list(a)redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe(a)redhat.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
https://www.redhat.com/archives/rdo-list/attachments/20150603/b703d8c3/at...
>
------------------------------
_______________________________________________
Rdo-list mailing list
Rdo-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list
End of Rdo-list Digest, Vol 27, Issue 4
***************************************
6:08 p.m.
New subject: [Rdo-list] autoscaling.yaml template
On Tue, Jun 2, 2015 at 11:12 PM, ICHIBA Sara <ichi.sara(a)gmail.com> wrote:
If you see the biginning of the cloud ini: you 'll find out that
i
configured a wordpress repo on a web server: 192.168.5.105/repos/wordpress.
and normaly my vm should download the packages from that repos. But, I don't
know why it doesn't
What result do you get if you add that /etc/yum.repos.d/rhel.repo file
manually on an instance?
>>
>> Towards the end of the log is the following:
>>
>> cloud-init[922]: No package wordpress available.
>>
>> The main Fedora repository includes wordpress, but the CentOS one does
>> not. You will either need to add the CentOS EPEL repository in your boot
>> script, or switch to a Fedora cloud image.
>>
>>
>>
>> On 03/06/15 08:06, ICHIBA Sara wrote:
>> > Hello there,
>> >
>> > Lately i was trying to make work the autoscaling.yaml template. So I
>> > installed a web server and uploaded the wordpress repo . when I launch
>> > my template with heat, and take a look at the log of the web server
>> > and the db server launched with heat I found these errors. Can you
>> > tell me what I can do to fix them? below the logs and attached the
>> > temmplate I use
>> >
>> > ====> database server log
>> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun
2015
>> > 15:47:39 +0000. Up 9.78 seconds.
>> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
>> > info++++++++++++++++++++++++++
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: | Device | Up | Address | Mask |
>> > Hw-Address |
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0 |
>> > . |
>> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.169 | 255.255.255.0 |
>> > fa:16:3e:f3:f2:25 |
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
>> > info++++++++++++++++++++++++++++++
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> > cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
>> > | Interface | Flags |
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
>> > | eth0 | UG |
>> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
>> > 255.255.255.0 | eth0 | U |
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> >
>> > CentOS Linux 7 (Core)
>> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
>> >
>> > host-20-0-0-169 login: cloud-init[901]: Cloud-init v. 0.7.5 running
>> > 'modules:config' at Tue, 02 Jun 2015 15:47:44 +0000. Up 15.32
seconds.
>> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue,
02
>> > Jun 2015 15:47:45 +0000. Up 15.87 seconds.
>> > cloud-init[922]: #!/bin/bash -v
>> > cloud-init[922]: cat << EOF > /etc/resolv.conf
>> > cloud-init[922]: nameserver 8.8.8.8
>> > cloud-init[922]: EOF
>> > cloud-init[922]: yum -y install firewalld
>> > cloud-init[922]: Loaded plugins: fastestmirror
>> > cloud-init[922]: Determining fastest mirrors
>> > cloud-init[922]: * base:centos.quelquesmots.fr
>> > <http://centos.quelquesmots.fr/>
>> > cloud-init[922]: * extras:centos.mirrors.ovh.net
>> > <http://centos.mirrors.ovh.net/>
>> > cloud-init[922]: * updates:centos.quelquesmots.fr
>> > <http://centos.quelquesmots.fr/>
>>
>> > cloud-init[922]: Resolving Dependencies
>> > cloud-init[922]: --> Running transaction check
>> > cloud-init[922]: ---> Package firewalld.noarch 0:0.3.9-11.el7 will be
>> > installed
>> > cloud-init[922]: --> Processing Dependency: python-slip-dbus for
>> > package: firewalld-0.3.9-11.el7.noarch
>> > cloud-init[922]: --> Processing Dependency: ebtables for package:
>> > firewalld-0.3.9-11.el7.noarch
>> > cloud-init[922]: --> Running transaction check
>> > cloud-init[922]: ---> Package ebtables.x86_64 0:2.0.10-13.el7 will be
>> > installed
>> > cloud-init[922]: ---> Package python-slip-dbus.noarch 0:0.4.0-2.el7 will
>> > be installed
>> > cloud-init[922]: --> Processing Dependency: python-slip = 0.4.0-2.el7
>> > for package: python-slip-dbus-0.4.0-2.el7.noarch
>> > cloud-init[922]: --> Running transaction check
>> > cloud-init[922]: ---> Package python-slip.noarch 0:0.4.0-2.el7 will be
>> > installed
>> > cloud-init[922]: --> Finished Dependency Resolution
>> > cloud-init[922]: Dependencies Resolved
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Package Arch Version
>> > Repository Size
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Installing:
>> > cloud-init[922]: firewalld noarch 0.3.9-11.el7
>> > base 465 k
>> > cloud-init[922]: Installing for dependencies:
>> > cloud-init[922]: ebtables x86_64 2.0.10-13.el7
>> > base 122 k
>> > cloud-init[922]: python-slip noarch 0.4.0-2.el7
>> > base 30 k
>> > cloud-init[922]: python-slip-dbus noarch 0.4.0-2.el7
>> > base 31 k
>> > cloud-init[922]: Transaction Summary
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Install 1 Package (+3 Dependent packages)
>> > cloud-init[922]: Total download size: 649 k
>> > cloud-init[922]: Installed size: 2.8 M
>> > cloud-init[922]: Downloading packages:
>> > cloud-init[922]: warning:
>> > /var/cache/yum/x86_64/7/base/packages/python-slip-0.4.0-2.el7.noarch.rpm:
>> > Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
>> > cloud-init[922]: Public key for python-slip-0.4.0-2.el7.noarch.rpm is
>> > not installed
>> > cloud-init[922]:
>> >
--------------------------------------------------------------------------------
>> > cloud-init[922]: Total 462
>> > kB/s | 649 kB 00:01
>> > cloud-init[922]: Retrieving key from
>> > file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
>> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
>> > Key) <security(a)centos.org <mailto:security@centos.org>>"
>>
>> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
>> > f4a8 0eb5
>> > cloud-init[922]: Package :
>> > centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
>> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> > cloud-init[922]: Running transaction check
>> > cloud-init[922]: Running transaction test
>> > cloud-init[922]: Transaction test succeeded
>> > cloud-init[922]: Running transaction
>> > cloud-init[922]: Installing : python-slip-0.4.0-2.el7.noarch
>> > 1/4
>> > cloud-init[922]: Installing : python-slip-dbus-0.4.0-2.el7.noarch
>> > 2/4
>> > cloud-init[922]: Installing : ebtables-2.0.10-13.el7.x86_64
>> > 3/4
>> > cloud-init[922]: Installing : firewalld-0.3.9-11.el7.noarch
>> > 4/4
>> > cloud-init[922]: Verifying : firewalld-0.3.9-11.el7.noarch
>> > 1/4
>> > cloud-init[922]: Verifying : python-slip-dbus-0.4.0-2.el7.noarch
>> > 2/4
>> > cloud-init[922]: Verifying : ebtables-2.0.10-13.el7.x86_64
>> > 3/4
>> > cloud-init[922]: Verifying : python-slip-0.4.0-2.el7.noarch
>> > 4/4
>> > cloud-init[922]: Installed:
>> > cloud-init[922]: firewalld.noarch 0:0.3.9-11.el7
>> > cloud-init[922]: Dependency Installed:
>> > cloud-init[922]: ebtables.x86_64 0:2.0.10-13.el7
>> > python-slip.noarch 0:0.4.0-2.el7
>> > cloud-init[922]: python-slip-dbus.noarch 0:0.4.0-2.el7
>> > cloud-init[922]: Complete!
>> > cloud-init[922]: systemctl start firewalld
>> > Starting firewalld - dynamic firewall daemon...
>> > [ 37.378596] ip_tables: (C) 2000-2006 Netfilter Core Team
>> > [ 37.429522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> > [ 37.491387] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> > [ 37.539733] Ebtables v2.0 registered
>> > [ 37.572087] Bridge firewalling registered
>> > [[32m OK [0m] Started firewalld - dynamic firewall daemon.
>> > cloud-init[922]: systemctl enable firewalld
>> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
>> > [ 40.564139] Adjusting kvm-clock more than 11% (9437184 vs 9311354)
>> > cloud-init[922]: ERROR:dbus.proxies:Introspect error on
>> > :1.6:/org/fedoraproject/FirewallD1: dbus.exceptions.DBusException:
>> > org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
causes
>> > include: the remote application did not send a reply, the message bus
>> > security policy blocked the reply, the reply timeout expired, or the
network
>> > connection was broken.
>> > Starting Authorization Manager...
>> > [[32m OK [0m] Started Authorization Manager.
>> > [[32m OK [0m] Created slice user-0.slice.
>> > Starting Cleanup of Temporary Directories...
>> > [[32m OK [0m] Started Cleanup of Temporary Directories.
>> > ===>web-server log
>> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun
2015
>> > 16:01:42 +0000. Up 12.17 seconds.
>> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
>> > info++++++++++++++++++++++++++
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: | Device | Up | Address | Mask |
>> > Hw-Address |
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0 |
>> > . |
>> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.172 | 255.255.255.0 |
>> > fa:16:3e:61:e9:0e |
>> > cloud-init[728]: ci-info:
>> > +--------+------+------------+---------------+-------------------+
>> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
>> > info++++++++++++++++++++++++++++++
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> > cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
>> > | Interface | Flags |
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
>> > | eth0 | UG |
>> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
>> > 255.255.255.0 | eth0 | U |
>> > cloud-init[728]: ci-info:
>> > +-------+-------------+----------+---------------+-----------+-------+
>> >
>> > CentOS Linux 7 (Core)
>> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
>> >
>> > host-20-0-0-172 login: cloud-init[901]: Cloud-init v. 0.7.5 running
>> > 'modules:config' at Tue, 02 Jun 2015 16:01:47 +0000. Up 16.92
seconds.
>> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue,
02
>> > Jun 2015 16:01:47 +0000. Up 17.53 seconds.
>> > cloud-init[922]: #!/bin/bash -v
>> > cloud-init[922]: cat << EOF > /etc/resolv.conf
>> > cloud-init[922]: nameserver 8.8.8.8
>> > cloud-init[922]: EOF
>> > cloud-init[922]: yum -y install firewalld
>> > cloud-init[922]: systemctl start firewalld
>> > cloud-init[922]: systemctl enable firewalld
>> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
>> > cloud-init[922]: firewall-cmd --permanent --add-port=80/tcp
>> > cloud-init[922]: firewall-cmd --permanent --add-port=443/tcp
>> > cloud-init[922]: firewall-cmd --reload
>> > cloud-init[922]: cat << EOF >> /etc/yum.repos.d/rhel.repo
>> > cloud-init[922]: [rhel-7-server-rpms]
>> > cloud-init[922]: name=rhel-7-server-rpms
>> > cloud-init[922]: baseurl=http://172.16.0.129:81/repos/rhel-7-server-rpms
>> > cloud-init[922]
>> > <http://172.16.0.129:81/repos/rhel-7-server-rpmscloud-init%5B922%5D>;:
>> > gpgcheck=0
>> > cloud-init[922]: enabled=1
>> > cloud-init[922]: [wordpress]
>> > cloud-init[922]: name=wordpress
>> > cloud-init[922]: baseurl=http://192.168.5.105:80/repos/wordpress
>> > cloud-init[922]
>> > <http://192.168.5.105:80/repos/wordpresscloud-init%5B922%5D>;:
gpgcheck=0
>> > cloud-init[922]: enabled=1
>> > cloud-init[922]: EOF
>> > cloud-init[922]: yum -y install httpd wordpress
>> > cloud-init[922]: Loaded plugins: fastestmirror
>> > cloud-init[922]: Determining fastest mirrors
>> > cloud-init[922]: * base:centos.crazyfrogs.org
>> > <http://centos.crazyfrogs.org>
>> > cloud-init[922]: * extras:centos.crazyfrogs.org
>> > <http://centos.crazyfrogs.org>
>> > cloud-init[922]: * updates:centos.crazyfrogs.org
>> > <http://centos.crazyfrogs.org>
>>
>> > cloud-init[922]: No package wordpress available.
>> > cloud-init[922]: Resolving Dependencies
>> > cloud-init[922]: --> Running transaction check
>> > cloud-init[922]: ---> Package httpd.x86_64 0:2.4.6-31.el7.centos will be
>> > installed
>> > cloud-init[922]: --> Processing Dependency: httpd-tools =
>> > 2.4.6-31.el7.centos for package: httpd-2.4.6-31.el7.centos.x86_64
>> > cloud-init[922]: --> Processing Dependency: /etc/mime.types for package:
>> > httpd-2.4.6-31.el7.centos.x86_64
>> > cloud-init[922]: --> Processing Dependency: libaprutil-1.so.0()(64bit)
>> > for package: httpd-2.4.6-31.el7.centos.x86_64
>> > cloud-init[922]: --> Processing Dependency: libapr-1.so.0()(64bit) for
>> > package: httpd-2.4.6-31.el7.centos.x86_64
>> > cloud-init[922]: --> Running transaction check
>> > cloud-init[922]: ---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
>> > cloud-init[922]: ---> Package apr-util.x86_64 0:1.5.2-6.el7 will be
>> > installed
>> > cloud-init[922]: ---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos
>> > will be installed
>> > cloud-init[922]: ---> Package mailcap.noarch 0:2.1.41-2.el7 will be
>> > installed
>> > cloud-init[922]: --> Finished Dependency Resolution
>> > cloud-init[922]: Dependencies Resolved
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Package Arch Version
>> > Repository Size
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Installing:
>> > cloud-init[922]: httpd x86_64 2.4.6-31.el7.centos
>> > base 2.7 M
>> > cloud-init[922]: Installing for dependencies:
>> > cloud-init[922]: apr x86_64 1.4.8-3.el7
>> > base 103 k
>> > cloud-init[922]: apr-util x86_64 1.5.2-6.el7
>> > base 92 k
>> > cloud-init[922]: httpd-tools x86_64 2.4.6-31.el7.centos
>> > base 79 k
>> > cloud-init[922]: mailcap noarch 2.1.41-2.el7
>> > base 31 k
>> > cloud-init[922]: Transaction Summary
>> > cloud-init[922]:
>> >
================================================================================
>> > cloud-init[922]: Install 1 Package (+4 Dependent packages)
>> > cloud-init[922]: Total download size: 3.0 M
>> > cloud-init[922]: Installed size: 10 M
>> > cloud-init[922]: Downloading packages:
>> > cloud-init[922]: warning:
>> > /var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3
>> > RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
>> > cloud-init[922]: Public key for apr-1.4.8-3.el7.x86_64.rpm is not
>> > installed
>> > cloud-init[922]:
>> >
--------------------------------------------------------------------------------
>> > cloud-init[922]: Total 949
>> > kB/s | 3.0 MB 00:03
>> > cloud-init[922]: Retrieving key from
>> > file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
>> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
>> > Key) <security(a)centos.org <mailto:security@centos.org>>"
>>
>> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
>> > f4a8 0eb5
>> > cloud-init[922]: Package :
>> > centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
>> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> > cloud-init[922]: Running transaction check
>> > cloud-init[922]: Running transaction test
>> > cloud-init[922]: Transaction test succeeded
>> > cloud-init[922]: Running transaction
>> > cloud-init[922]: Installing : apr-1.4.8-3.el7.x86_64
>> > 1/5
>> > cloud-init[922]: Installing : apr-util-1.5.2-6.el7.x86_64
>> > 2/5
>> > cloud-init[922]: Installing : httpd-tools-2.4.6-31.el7.centos.x86_64
>> > 3/5
>> > cloud-init[922]: Installing : mailcap-2.1.41-2.el7.noarch
>> > 4/5
>> > cloud-init[922]: Installing : httpd-2.4.6-31.el7.centos.x86_64
>> > 5/5
>> > cloud-init[922]: Verifying : httpd-tools-2.4.6-31.el7.centos.x86_64
>> > 1/5
>> > cloud-init[922]: Verifying : apr-1.4.8-3.el7.x86_64
>> > 2/5
>> > cloud-init[922]: Verifying : mailcap-2.1.41-2.el7.noarch
>> > 3/5
>> > cloud-init[922]: Verifying : httpd-2.4.6-31.el7.centos.x86_64
>> > 4/5
>> > cloud-init[922]: Verifying : apr-util-1.5.2-6.el7.x86_64
>> > 5/5
>> > cloud-init[922]: Installed:
>> > cloud-init[922]: httpd.x86_64 0:2.4.6-31.el7.centos
>> > cloud-init[922]: Dependency Installed:
>> > cloud-init[922]: apr.x86_64 0:1.4.8-3.el7
>> > apr-util.x86_64 0:1.5.2-6.el7
>> > cloud-init[922]: httpd-tools.x86_64 0:2.4.6-31.el7.centos
>> > mailcap.noarch 0:2.1.41-2.el7
>> > cloud-init[922]: Complete!
>> > cloud-init[922]: systemctl start httpd.service
>> > Starting The Apache HTTP Server...
>> > [[32m OK [0m] Started The Apache HTTP Server.
>> > cloud-init[922]: systemctl enable httpd.service
>> > cloud-init[922]: ln -s '/usr/lib/systemd/system/httpd.service'
>> > '/etc/systemd/system/multi-user.target.wants/httpd.service'
>> > cloud-init[922]: setsebool -P httpd_can_network_connect_db=1
>> > cloud-init[922]: sed -i "/Deny from All/d"
>> > /etc/httpd/conf.d/wordpress.conf
>> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
>> > such file or directory
>> > cloud-init[922]: sed -i "s/Require local/Require all granted/"
>> > /etc/httpd/conf.d/wordpress.conf
>> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
>> > such file or directory
>> > cloud-init[922]: sed -i s/database_name_here/wordpress/
>> > /etc/wordpress/wp-config.php
>> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
>> > file or directory
>> > cloud-init[922]: sed -i s/username_here/wordpress/
>> > /etc/wordpress/wp-config.php
>> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
>> > file or directory
>> > cloud-init[922]: sed -i
>> > s/password_here/GJM76RbvIje4C7eh2aOdlQQedqvxjBH2/
>> > /etc/wordpress/wp-config.php
>> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
>> > file or directory
>> > cloud-init[922]: sed -i s/localhost/20.0.0.68/ <http://20.0.0.68/>
>> > /etc/wordpress/wp-config.php
>>
>> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
>> > file or directory
>> > cloud-init[922]: systemctl restart httpd.service
>> > Stopping The Apache HTTP Server...
>> > [[32m OK [0m] Stopped The Apache HTTP Server.
>> > Starting The Apache HTTP Server...
>> > [[32m OK [0m] Started The Apache HTTP Server.
>> > ci-info: ++++++++++Authorized keys from
>> > /home/centos/.ssh/authorized_keys for user centos+++++++++++
>> > ci-info:
>> >
+---------+-------------------------------------------------+---------+-------------------+
>> > ci-info: | Keytype | Fingerprint (md5) |
>> > Options | Comment |
>> > ci-info:
>> >
+---------+-------------------------------------------------+---------+-------------------+
>> > ci-info: | ssh-rsa | 2d:b8:76:2f:ab:f5:f1:72:f8:75:46:00:f9:d3:24:60 |
>> > - | Generated-by-Nova |
>> > ci-info:
>> >
+---------+-------------------------------------------------+---------+-------------------+
>> > ec2:
>> > ec2: #############################################################
>> > ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
>> > ec2: 256 88:ab:b1:ac:08:d9:70:41:f2:04:14:a3:1a:4d:02:fe (ECDSA)
>> > ec2: 256 0e:3e:9b:d5:4b:cb:c9:78:c7:99:a4:bf:05:0d:7a:a8 (ED25519)
>> > ec2: 2048 f2:f8:e5:70:d1:f4:f0:57:ea:9c:d1:75:f3:75:17:22 (RSA)
>> > ec2: -----END SSH HOST KEY FINGERPRINTS-----
>> > ec2: #############################################################
>> > -----BEGIN SSH HOST KEY KEYS-----
>> > ecdsa-sha2-nistp256
>> >
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCXquFpCyVkwLlWJ81GozEjViYP41EELARbVt5ISfsRCDNGk31bsGmgy7ecjg7g1LRtTxTs0OWJ3Hy2fZhio1KQ=
>> > ssh-ed25519
>> > AAAAC3NzaC1lZDI1NTE5AAAAICORDKYmglupDLdv8Cj5ut14BpD65Grm8p0SQDifMans
>> > ssh-rsa
>> >
AAAAB3NzaC1yc2EAAAADAQABAAABAQDTQjdbT8OCAnmV5bbO/llks+2E26pajgS9ZortTLKOGQp9KmYMIq9CXjUWQjmn+vlFMPkyMk4DG9K/XDX3WRXgErNUpIsmJPUMOnoyxz4U+dYCOSm7pUfoyQphvqxGzkzC/UMwHYcakSpUssLUY85ZcoIz9HmaNTkiiHoJe/ezvjVrAAAcOViYL2qcOATf7MfNqkyqJlk65O7k5pf3+RFh9ta1rijubzaHfBZxKiQfVeJV61vwmF6tBONDOlC/BVSI+k/zg0Evsn+5uKPlhsoeB5uSr1DxTSdBYn3yrHcqceEtgh2uiwhS7prvU911KfRjkf+PwGvtDg9iLlAuJioV
>> > -----END SSH HOST KEY KEYS-----
>> > cloud-init[922]: Cloud-init v. 0.7.5 finished at Tue, 02 Jun 2015
>> > 16:02:31 +0000. Datasource DataSourceOpenStack [net,ver=2]. Up 60.92
>> > seconds
>> > [[32m OK [0m] Started Execute cloud user/final scripts.
>> > [[32m OK [0m] Reached target Multi-User System.
>> >
>> >
>> >
>> > _______________________________________________
>> > Rdo-list mailing list
>> > Rdo-list(a)redhat.com
>> > https://www.redhat.com/mailman/listinfo/rdo-list
>> >
>> > To unsubscribe: rdo-list-unsubscribe(a)redhat.com
>>
>>
10:20 a.m.
New subject: [Rdo-list] autoscaling.yaml template
Hey guys,
Thank you so much. I switched to fedora 21 image for my stack instead of
centos7 and it's working as expected. Wordpress is installed and I can
login and do whatever I want. I have one remaining issue. I tried to
consume cpu with some dd commands but ceilometer is taking so much time to
report it. I tried these commands :
sudo nice -n -20 dd if=/dev/zero of=/dev/null bs=1024k
dd if=/dev/urandom of=/dev/null &
I did these commands a lot of times, but the alarm is never triggered
quickly ( I have to count 20 min at least to see the first one) even if i'm
sitting the cpu_scaleup alarm at 1 min.
can you help me?
2015-06-02 23:12 GMT+02:00 ICHIBA Sara <ichi.sara(a)gmail.com>:
If you see the biginning of the cloud ini: you 'll find out that
i
configured a wordpress repo on a web server: 192.168.5.105/repos/wordpress.
and normaly my vm should download the packages from that repos. But, I
don't know why it doesn't
>
> Towards the end of the log is the following:
>
> cloud-init[922]: No package wordpress available.
>
> The main Fedora repository includes wordpress, but the CentOS one does
> not. You will either need to add the CentOS EPEL repository in your boot
> script, or switch to a Fedora cloud image.
>
>
>
>
> On 03/06/15 08:06, ICHIBA Sara wrote:
> > Hello there,
> >
> > Lately i was trying to make work the autoscaling.yaml template. So I
> > installed a web server and uploaded the wordpress repo . when I launch
> > my template with heat, and take a look at the log of the web server
> > and the db server launched with heat I found these errors. Can you
> > tell me what I can do to fix them? below the logs and attached the
> > temmplate I use
> >
> > ====> database server log
> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
> 15:47:39 +0000. Up 9.78 seconds.
> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
> info++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | Device | Up | Address | Mask
> | Hw-Address |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
> | . |
> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.169 | 255.255.255.0
> | fa:16:3e:f3:f2:25 |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
> info++++++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | Route | Destination | Gateway |
> Genmask | Interface | Flags |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 |
> 0.0.0.0 | eth0 | UG |
> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
> 255.255.255.0 | eth0 | U |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> >
> > CentOS Linux 7 (Core)
> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
> >
> > host-20-0-0-169 login: cloud-init[901]: Cloud-init v. 0.7.5 running
> 'modules:config' at Tue, 02 Jun 2015 15:47:44 +0000. Up 15.32 seconds.
> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
> Jun 2015 15:47:45 +0000. Up 15.87 seconds.
> > cloud-init[922]: #!/bin/bash -v
> > cloud-init[922]: cat << EOF > /etc/resolv.conf
> > cloud-init[922]: nameserver 8.8.8.8
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install firewalld
> > cloud-init[922]: Loaded plugins: fastestmirror
> > cloud-init[922]: Determining fastest mirrors
> > cloud-init[922]: * base:centos.quelquesmots.fr <
> http://centos.quelquesmots.fr/>
> > cloud-init[922]: * extras:centos.mirrors.ovh.net <
> http://centos.mirrors.ovh.net/>
> > cloud-init[922]: * updates:centos.quelquesmots.fr <
> http://centos.quelquesmots.fr/>
>
> > cloud-init[922]: Resolving Dependencies
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package firewalld.noarch 0:0.3.9-11.el7 will be
> installed
> > cloud-init[922]: --> Processing Dependency: python-slip-dbus for
> package: firewalld-0.3.9-11.el7.noarch
> > cloud-init[922]: --> Processing Dependency: ebtables for package:
> firewalld-0.3.9-11.el7.noarch
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package ebtables.x86_64 0:2.0.10-13.el7 will be
> installed
> > cloud-init[922]: ---> Package python-slip-dbus.noarch 0:0.4.0-2.el7
> will be installed
> > cloud-init[922]: --> Processing Dependency: python-slip = 0.4.0-2.el7
> for package: python-slip-dbus-0.4.0-2.el7.noarch
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package python-slip.noarch 0:0.4.0-2.el7 will be
> installed
> > cloud-init[922]: --> Finished Dependency Resolution
> > cloud-init[922]: Dependencies Resolved
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Package Arch Version
> Repository Size
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Installing:
> > cloud-init[922]: firewalld noarch 0.3.9-11.el7
> base 465 k
> > cloud-init[922]: Installing for dependencies:
> > cloud-init[922]: ebtables x86_64 2.0.10-13.el7
> base 122 k
> > cloud-init[922]: python-slip noarch 0.4.0-2.el7
> base 30 k
> > cloud-init[922]: python-slip-dbus noarch 0.4.0-2.el7
> base 31 k
> > cloud-init[922]: Transaction Summary
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Install 1 Package (+3 Dependent packages)
> > cloud-init[922]: Total download size: 649 k
> > cloud-init[922]: Installed size: 2.8 M
> > cloud-init[922]: Downloading packages:
> > cloud-init[922]: warning:
> /var/cache/yum/x86_64/7/base/packages/python-slip-0.4.0-2.el7.noarch.rpm:
> Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> > cloud-init[922]: Public key for python-slip-0.4.0-2.el7.noarch.rpm is
> not installed
> > cloud-init[922]:
> --------------------------------------------------------------------------------
> > cloud-init[922]: Total 462
> kB/s | 649 kB 00:01
> > cloud-init[922]: Retrieving key from
> file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
> Key) <security(a)centos.org <mailto:security@centos.org>>"
>
> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
> f4a8 0eb5
> > cloud-init[922]: Package :
> centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Running transaction check
> > cloud-init[922]: Running transaction test
> > cloud-init[922]: Transaction test succeeded
> > cloud-init[922]: Running transaction
> > cloud-init[922]: Installing : python-slip-0.4.0-2.el7.noarch
> 1/4
> > cloud-init[922]: Installing : python-slip-dbus-0.4.0-2.el7.noarch
> 2/4
> > cloud-init[922]: Installing : ebtables-2.0.10-13.el7.x86_64
> 3/4
> > cloud-init[922]: Installing : firewalld-0.3.9-11.el7.noarch
> 4/4
> > cloud-init[922]: Verifying : firewalld-0.3.9-11.el7.noarch
> 1/4
> > cloud-init[922]: Verifying : python-slip-dbus-0.4.0-2.el7.noarch
> 2/4
> > cloud-init[922]: Verifying : ebtables-2.0.10-13.el7.x86_64
> 3/4
> > cloud-init[922]: Verifying : python-slip-0.4.0-2.el7.noarch
> 4/4
> > cloud-init[922]: Installed:
> > cloud-init[922]: firewalld.noarch 0:0.3.9-11.el7
> > cloud-init[922]: Dependency Installed:
> > cloud-init[922]: ebtables.x86_64 0:2.0.10-13.el7
> python-slip.noarch 0:0.4.0-2.el7
> > cloud-init[922]: python-slip-dbus.noarch 0:0.4.0-2.el7
> > cloud-init[922]: Complete!
> > cloud-init[922]: systemctl start firewalld
> > Starting firewalld - dynamic firewall daemon...
> > [ 37.378596] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 37.429522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 37.491387] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 37.539733] Ebtables v2.0 registered
> > [ 37.572087] Bridge firewalling registered
> > [[32m OK [0m] Started firewalld - dynamic firewall daemon.
> > cloud-init[922]: systemctl enable firewalld
> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> > [ 40.564139] Adjusting kvm-clock more than 11% (9437184 vs 9311354)
> > cloud-init[922]: ERROR:dbus.proxies:Introspect error on
> :1.6:/org/fedoraproject/FirewallD1: dbus.exceptions.DBusException:
> org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
> causes include: the remote application did not send a reply, the message
> bus security policy blocked the reply, the reply timeout expired, or the
> network connection was broken.
> > Starting Authorization Manager...
> > [[32m OK [0m] Started Authorization Manager.
> > [[32m OK [0m] Created slice user-0.slice.
> > Starting Cleanup of Temporary Directories...
> > [[32m OK [0m] Started Cleanup of Temporary Directories.
> > ===>web-server log
> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
> 16:01:42 +0000. Up 12.17 seconds.
> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
> info++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | Device | Up | Address | Mask
> | Hw-Address |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
> | . |
> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.172 | 255.255.255.0
> | fa:16:3e:61:e9:0e |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
> info++++++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | Route | Destination | Gateway |
> Genmask | Interface | Flags |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 |
> 0.0.0.0 | eth0 | UG |
> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
> 255.255.255.0 | eth0 | U |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> >
> > CentOS Linux 7 (Core)
> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
> >
> > host-20-0-0-172 login: cloud-init[901]: Cloud-init v. 0.7.5 running
> 'modules:config' at Tue, 02 Jun 2015 16:01:47 +0000. Up 16.92 seconds.
> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
> Jun 2015 16:01:47 +0000. Up 17.53 seconds.
> > cloud-init[922]: #!/bin/bash -v
> > cloud-init[922]: cat << EOF > /etc/resolv.conf
> > cloud-init[922]: nameserver 8.8.8.8
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install firewalld
> > cloud-init[922]: systemctl start firewalld
> > cloud-init[922]: systemctl enable firewalld
> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> > cloud-init[922]: firewall-cmd --permanent --add-port=80/tcp
> > cloud-init[922]: firewall-cmd --permanent --add-port=443/tcp
> > cloud-init[922]: firewall-cmd --reload
> > cloud-init[922]: cat << EOF >> /etc/yum.repos.d/rhel.repo
> > cloud-init[922]: [rhel-7-server-rpms]
> > cloud-init[922]: name=rhel-7-server-rpms
> > cloud-init[922]: baseurl=
> http://172.16.0.129:81/repos/rhel-7-server-rpms
> > cloud-init[922] <
> http://172.16.0.129:81/repos/rhel-7-server-rpmscloud-init%5B922%5D>;:
> gpgcheck=0
> > cloud-init[922]: enabled=1
> > cloud-init[922]: [wordpress]
> > cloud-init[922]: name=wordpress
> > cloud-init[922]: baseurl=http://192.168.5.105:80/repos/wordpress
> > cloud-init[922] <
> http://192.168.5.105:80/repos/wordpresscloud-init%5B922%5D>;: gpgcheck=0
> > cloud-init[922]: enabled=1
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install httpd wordpress
> > cloud-init[922]: Loaded plugins: fastestmirror
> > cloud-init[922]: Determining fastest mirrors
> > cloud-init[922]: * base:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
> > cloud-init[922]: * extras:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
> > cloud-init[922]: * updates:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
>
> > cloud-init[922]: No package wordpress available.
> > cloud-init[922]: Resolving Dependencies
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package httpd.x86_64 0:2.4.6-31.el7.centos will
> be installed
> > cloud-init[922]: --> Processing Dependency: httpd-tools =
> 2.4.6-31.el7.centos for package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: /etc/mime.types for
> package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: libaprutil-1.so.0()(64bit)
> for package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: libapr-1.so.0()(64bit) for
> package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
> > cloud-init[922]: ---> Package apr-util.x86_64 0:1.5.2-6.el7 will be
> installed
> > cloud-init[922]: ---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos
> will be installed
> > cloud-init[922]: ---> Package mailcap.noarch 0:2.1.41-2.el7 will be
> installed
> > cloud-init[922]: --> Finished Dependency Resolution
> > cloud-init[922]: Dependencies Resolved
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Package Arch Version
> Repository Size
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Installing:
> > cloud-init[922]: httpd x86_64 2.4.6-31.el7.centos
> base 2.7 M
> > cloud-init[922]: Installing for dependencies:
> > cloud-init[922]: apr x86_64 1.4.8-3.el7
> base 103 k
> > cloud-init[922]: apr-util x86_64 1.5.2-6.el7
> base 92 k
> > cloud-init[922]: httpd-tools x86_64 2.4.6-31.el7.centos
> base 79 k
> > cloud-init[922]: mailcap noarch 2.1.41-2.el7
> base 31 k
> > cloud-init[922]: Transaction Summary
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Install 1 Package (+4 Dependent packages)
> > cloud-init[922]: Total download size: 3.0 M
> > cloud-init[922]: Installed size: 10 M
> > cloud-init[922]: Downloading packages:
> > cloud-init[922]: warning:
> /var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3
> RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> > cloud-init[922]: Public key for apr-1.4.8-3.el7.x86_64.rpm is not
> installed
> > cloud-init[922]:
> --------------------------------------------------------------------------------
> > cloud-init[922]: Total 949
> kB/s | 3.0 MB 00:03
> > cloud-init[922]: Retrieving key from
> file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
> Key) <security(a)centos.org <mailto:security@centos.org>>"
>
> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
> f4a8 0eb5
> > cloud-init[922]: Package :
> centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Running transaction check
> > cloud-init[922]: Running transaction test
> > cloud-init[922]: Transaction test succeeded
> > cloud-init[922]: Running transaction
> > cloud-init[922]: Installing : apr-1.4.8-3.el7.x86_64
> 1/5
> > cloud-init[922]: Installing : apr-util-1.5.2-6.el7.x86_64
> 2/5
> > cloud-init[922]: Installing : httpd-tools-2.4.6-31.el7.centos.x86_64
> 3/5
> > cloud-init[922]: Installing : mailcap-2.1.41-2.el7.noarch
> 4/5
> > cloud-init[922]: Installing : httpd-2.4.6-31.el7.centos.x86_64
> 5/5
> > cloud-init[922]: Verifying : httpd-tools-2.4.6-31.el7.centos.x86_64
> 1/5
> > cloud-init[922]: Verifying : apr-1.4.8-3.el7.x86_64
> 2/5
> > cloud-init[922]: Verifying : mailcap-2.1.41-2.el7.noarch
> 3/5
> > cloud-init[922]: Verifying : httpd-2.4.6-31.el7.centos.x86_64
> 4/5
> > cloud-init[922]: Verifying : apr-util-1.5.2-6.el7.x86_64
> 5/5
> > cloud-init[922]: Installed:
> > cloud-init[922]: httpd.x86_64 0:2.4.6-31.el7.centos
> > cloud-init[922]: Dependency Installed:
> > cloud-init[922]: apr.x86_64 0:1.4.8-3.el7
> apr-util.x86_64 0:1.5.2-6.el7
> > cloud-init[922]: httpd-tools.x86_64 0:2.4.6-31.el7.centos
> mailcap.noarch 0:2.1.41-2.el7
> > cloud-init[922]: Complete!
> > cloud-init[922]: systemctl start httpd.service
> > Starting The Apache HTTP Server...
> > [[32m OK [0m] Started The Apache HTTP Server.
> > cloud-init[922]: systemctl enable httpd.service
> > cloud-init[922]: ln -s '/usr/lib/systemd/system/httpd.service'
> '/etc/systemd/system/multi-user.target.wants/httpd.service'
> > cloud-init[922]: setsebool -P httpd_can_network_connect_db=1
> > cloud-init[922]: sed -i "/Deny from All/d"
> /etc/httpd/conf.d/wordpress.conf
> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
> such file or directory
> > cloud-init[922]: sed -i "s/Require local/Require all granted/"
> /etc/httpd/conf.d/wordpress.conf
> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
> such file or directory
> > cloud-init[922]: sed -i s/database_name_here/wordpress/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i s/username_here/wordpress/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i
> s/password_here/GJM76RbvIje4C7eh2aOdlQQedqvxjBH2/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i s/localhost/20.0.0.68/ <http://20.0.0.68/>
> /etc/wordpress/wp-config.php
>
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: systemctl restart httpd.service
> > Stopping The Apache HTTP Server...
> > [[32m OK [0m] Stopped The Apache HTTP Server.
> > Starting The Apache HTTP Server...
> > [[32m OK [0m] Started The Apache HTTP Server.
> > ci-info: ++++++++++Authorized keys from
> /home/centos/.ssh/authorized_keys for user centos+++++++++++
> > ci-info:
>
+---------+-------------------------------------------------+---------+-------------------+
> > ci-info: | Keytype | Fingerprint (md5) |
> Options | Comment |
> > ci-info:
>
+---------+-------------------------------------------------+---------+-------------------+
> > ci-info: | ssh-rsa | 2d:b8:76:2f:ab:f5:f1:72:f8:75:46:00:f9:d3:24:60 |
> - | Generated-by-Nova |
> > ci-info:
>
+---------+-------------------------------------------------+---------+-------------------+
> > ec2:
> > ec2: #############################################################
> > ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
> > ec2: 256 88:ab:b1:ac:08:d9:70:41:f2:04:14:a3:1a:4d:02:fe (ECDSA)
> > ec2: 256 0e:3e:9b:d5:4b:cb:c9:78:c7:99:a4:bf:05:0d:7a:a8 (ED25519)
> > ec2: 2048 f2:f8:e5:70:d1:f4:f0:57:ea:9c:d1:75:f3:75:17:22 (RSA)
> > ec2: -----END SSH HOST KEY FINGERPRINTS-----
> > ec2: #############################################################
> > -----BEGIN SSH HOST KEY KEYS-----
> > ecdsa-sha2-nistp256
>
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCXquFpCyVkwLlWJ81GozEjViYP41EELARbVt5ISfsRCDNGk31bsGmgy7ecjg7g1LRtTxTs0OWJ3Hy2fZhio1KQ=
> > ssh-ed25519
> AAAAC3NzaC1lZDI1NTE5AAAAICORDKYmglupDLdv8Cj5ut14BpD65Grm8p0SQDifMans
> > ssh-rsa
>
AAAAB3NzaC1yc2EAAAADAQABAAABAQDTQjdbT8OCAnmV5bbO/llks+2E26pajgS9ZortTLKOGQp9KmYMIq9CXjUWQjmn+vlFMPkyMk4DG9K/XDX3WRXgErNUpIsmJPUMOnoyxz4U+dYCOSm7pUfoyQphvqxGzkzC/UMwHYcakSpUssLUY85ZcoIz9HmaNTkiiHoJe/ezvjVrAAAcOViYL2qcOATf7MfNqkyqJlk65O7k5pf3+RFh9ta1rijubzaHfBZxKiQfVeJV61vwmF6tBONDOlC/BVSI+k/zg0Evsn+5uKPlhsoeB5uSr1DxTSdBYn3yrHcqceEtgh2uiwhS7prvU911KfRjkf+PwGvtDg9iLlAuJioV
> > -----END SSH HOST KEY KEYS-----
> > cloud-init[922]: Cloud-init v. 0.7.5 finished at Tue, 02 Jun 2015
> 16:02:31 +0000. Datasource DataSourceOpenStack [net,ver=2]. Up 60.92
> seconds
> > [[32m OK [0m] Started Execute cloud user/final scripts.
> > [[32m OK [0m] Reached target Multi-User System.
> >
> >
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe(a)redhat.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
>
https://www.redhat.com/archives/rdo-list/attachments/20150603/b703d8c3/at...
> >
>
> ------------------------------
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list(a)redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
>
> End of Rdo-list Digest, Vol 27, Issue 4
> ***************************************
>
4034
days inactive
4035
days old
2 comments
2 participants
participants (2)
-
ICHIBA Sara -
Marius Cornea