Re: [Rdo-list] RH OpenStack v4 Evaluation: Initial Setup: First Compute Node Doesn't Show Up in Hypervisor List
2:01 p.m.
So even though the default controller puppet module configures qpidd.conf to say
"auth=yes", I changed it to "auth=no" and restarted qpidd service. I
now see my compute host in the dashboard.
Is that a misconfiguration in RHOSv4 that I should submit for a change somewhere?
-----Original Message-----
From: Lodgen, Brad
Sent: Wednesday, July 02, 2014 12:53 PM
To: 'Rhys Oxenham'
Cc: 'rdo-list(a)redhat.com'
Subject: RE: [Rdo-list] RH OpenStack v4 Evaluation: Initial Setup: First Compute Node
Doesn't Show Up in Hypervisor List
The settings in the controller/compute host group parameters regarding qpidd are all
default, except for the host, which is the private IP of the controller.
I haven't made any changes outside of the Foreman host group parameters and I
don't see any compute host group parameters that would allow me to specify whether a
service uses Qpid authentication or not.
I did change the compute host group parameter "auth_host" and
"nova_host" (originally by default set to 127.0.0.1) to the private IP of the
controller. Would that have any effect?
-----Original Message-----
From: Rhys Oxenham [mailto:roxenham@redhat.com]
Sent: Wednesday, July 02, 2014 12:35 PM
To: Lodgen, Brad
Cc: rdo-list(a)redhat.com
Subject: Re: [Rdo-list] RH OpenStack v4 Evaluation: Initial Setup: First Compute Node
Doesn't Show Up in Hypervisor List
Have you specified Qpid authentication in any of the rest of the services? I suspect that
Qpid is set up to use authentication but none of the other services are.
On 2 Jul 2014, at 18:30, Lodgen, Brad <Brad.Lodgen(a)centurylink.com> wrote:
# GENERATED BY PUPPET
#
# Configuration file for qpidd. Entries are of the form:
# name=value
#
# (Note: no spaces on either side of '='). Using default settings:
# "qpidd --help" or "man qpidd" for more details.
port=5672
max-connections=65535
worker-threads=17
connection-backlog=10
auth=yes
realm=QPID
-----Original Message-----
From: Rhys Oxenham [mailto:roxenham@redhat.com]
Sent: Wednesday, July 02, 2014 12:27 PM
To: Lodgen, Brad
Cc: rdo-list(a)redhat.com
Subject: Re: [Rdo-list] RH OpenStack v4 Evaluation: Initial Setup:
First Compute Node Doesn't Show Up in Hypervisor List
No worries!
Can you paste out your /etc/qpidd.conf file from the controller? (Make
sure you sanitise the output)
Cheers
Rhys
On 2 Jul 2014, at 18:23, Lodgen, Brad <Brad.Lodgen(a)centurylink.com> wrote:
> Thanks for the quick response! Based on the below log findings and what I just found
searching, is this caused by the controller host group parameter "freeipa" being
set to the default "false"? Change it to "true"?
>
>
>
> On the compute node, I'm seeing this over and over in the compute log:
>
> Unable to connect to AMQP server: Error in sasl_client_start (-1)
> SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure.
> Minor code may provide more information (Cannot determine realm for
> numeric host address). Sleeping 5 seconds
>
> On the controller conductor log:
>
> Unable to connect to AMQP server: Error in sasl_client_start (-1)
> SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure.
> Minor code may provide more information (Cannot determine realm for
> numeric host address). Sleeping 5 seconds
>
> In the controller messages file:
>
> python: GSSAPI Error: Unspecified GSS failure. Minor code may
> provide more information (Cannot determine realm for numeric host
> address)
>
>
>
>
>
> -----Original Message-----
> From: Rhys Oxenham [mailto:roxenham@redhat.com]
> Sent: Wednesday, July 02, 2014 12:14 PM
> To: Lodgen, Brad
> Cc: rdo-list(a)redhat.com
> Subject: Re: [Rdo-list] RH OpenStack v4 Evaluation: Initial Setup:
> First Compute Node Doesn't Show Up in Hypervisor List
>
> Hi Brad,
>
> Have you checked the nova-compute logs in /var/log/nova/compute.log
> (on your new compute node?)
>
> This should point towards why it's unable to connect/start etc. I suspect that
it's unable to join the message queue, and hence show up as an available hypervisor.
>
> Many thanks
> Rhys
>
> On 2 Jul 2014, at 18:05, Lodgen, Brad <Brad.Lodgen(a)centurylink.com> wrote:
>
>> Hi folks,
>>
>> I have an issue where I've just done the initial setup and added a controller
node, it finished, then I added a compute node, it finished, but I don't see the
compute node in the hypervisor list on the dashboard. I'm using the RH OpenStack
evaluation version 4. I have five hosts present in Foreman.
>>
>> -Foreman host (purely for Foreman)
>> -Controller host (applied Controller(Nova) host group) -Compute Host
>> (applied Compute(Nova) host group)
>> -2 other hosts (not host group applied, but one will be compute and
>> one will be storage)
>>
>> Did I miss something on the controller/compute host group parameters that would
cause it to not show up in the dashboard?
>> _______________________________________________
>> Rdo-list mailing list
>> Rdo-list(a)redhat.com
>> https://www.redhat.com/mailman/listinfo/rdo-list
>
3597
days inactive
3597
days old
0 comments
1 participants
participants (1)
-
Lodgen, Brad