On Tue, May 9, 2017 at 2:22 PM, Justin Kilpatrick <jkilpatr(a)redhat.com&gt; wrote: I'm already running in an oVirt VM, so too many levels of nesting might be bad. I'll try it, but this method seems to mean that my cinder-volumes VG can't be used. It's also not particularly useful if I want to develop an OpenStack application, as there's no capacity... -- 真実はいつも一つ！/ Always, there's only one truth!

On Tue, May 9, 2017 at 2:55 PM, David Moreau Simard <dms(a)redhat.com&gt; wrote: I followed the "Summary for the impatient" steps for CentOS from: https://www.rdoproject.org/install/quickstart/ There was one exception: I set up a 400GB VG called "cinder-volumes" before starting. Aside from that, nothing special at all. -- 真実はいつも一つ！/ Always, there's only one truth!

​On Tue, May 9, 2017 at 3:04 PM, Neal Gompa <ngompa13(a)gmail.com&gt; wrote: ​Hm, that should work. I'll try it out if I have time.​ On Tue, May 9, 2017 at 3:26 PM, Boris Derzhavets <bderzhavets(a)hotmail.com&gt; wrote: Don't use trunk repositories unless you know what you are doing and you have a good reason to use them. ​The repositories are buildlogs are being phased out [1] so I would also advise against using those. [1]: https://review.rdoproject.org/r/#/q/topic:remove-buildlogs David Moreau Simard Senior Software Engineer | Openstack RDO dmsimard = [irc, github, twitter] On Tue, May 9, 2017 at 3:26 PM, Boris Derzhavets <bderzhavets(a)hotmail.com&gt; wrote:

________________________________ From: David Moreau Simard <dms(a)redhat.comSent: Tuesday, May 9, 2017 10:33 PM To: Boris Derzhavets Cc: Neal Gompa; rdo-list(a)redhat.com Subject: Re: [rdo-list] Failures when trying to set up OpenStack Ocata all-in-one with Packstack On Tue, May 9, 2017 at 3:04 PM, Neal Gompa <ngompa13@gmail.com<mailto:ngompa13@gmail.com>> wrote: Hm, that should work. I'll try it out if I have time. On Tue, May 9, 2017 at 3:26 PM, Boris Derzhavets <bderzhavets@hotmail.com<mailto:bderzhavets@hotmail.com>> wrote: # curl -o /etc/yum.repos.d/delorean-ocata.repo https://buildlogs.centos.org/centos/7/cloud/x86_64/rdo-trunk-ocata-tested... # curl -o /etc/yum.repos.d/delorean-deps-ocata.repo https://trunk.rdoproject.org/centos7-ocata/delorean-deps.repo If something was recently changed in https://trunk.rdoproject.org/centos7-ocata/delorean-deps.repo Don't use trunk repositories unless you know what you are doing and you have a good reason to use them. The repositories are buildlogs are being phased out [1] so I would also advise against using those. [1]: https://review.rdoproject.org/r/#/q/topic:remove-buildlogs As far as I see OOOQ does use ( on undercloud ) https://trunk.rdoproject.org/centos7-ocata/current-passed-ci/delorean.repo https://trunk.rdoproject.org/centos7-ocata/delorean-deps.repo with yum-plugin-priorities-1.1.31-40.el7.noarch installed. I am going to test this set up with packstack at my earliest convenience. I cannot believe that the most recent Ocata trunk "current passed ci" won't work for packstack, unless you have made some serious changes vs RDO Newton packaging design. Thank you. Boris David Moreau Simard Senior Software Engineer | Openstack RDO dmsimard = [irc, github, twitter] On Tue, May 9, 2017 at 3:26 PM, Boris Derzhavets <bderzhavets@hotmail.com<mailto:bderzhavets@hotmail.com>> wrote: ________________________________ From: rdo-list-bounces@redhat.com<mailto:rdo-list-bounces@redhat.com> <rdo-list-bounces@redhat.com<mailto:rdo-list-bounces@redhat.com>> on behalf of Neal Gompa <ngompa13@gmail.com<mailto:ngompa13@gmail.com>Sent: Tuesday, May 9, 2017 9:00 PM To: rdo-list@redhat.com<mailto:rdo-list@redhat.comSubject: [rdo-list] Failures when trying to set up OpenStack Ocata all-in-one with Packstack Hello, I'm trying to set up RDO OpenStack Ocata using Packstack in an all-in-one configuration for evaluation purposes. However, Packstack ultimately fails because it can't start the Nova scheduler. interaction with MariaDB. I'm using CentOS 7.3 with latest updates. It's an 8 core system with 32GB of RAM. Does anyone have any idea what's going wrong? The last time I deployed RDO Ocata via packstack, repos set up on each deployment node was as follows :- # yum -y install yum-plugin-priorities # curl -o /etc/yum.repos.d/delorean-ocata.repo https://buildlogs.centos.org/centos/7/cloud/x86_64/rdo-trunk-ocata-tested... # curl -o /etc/yum.repos.d/delorean-deps-ocata.repo https://trunk.rdoproject.org/centos7-ocata/delorean-deps.repo If something was recently changed in https://trunk.rdoproject.org/centos7-ocata/delorean-deps.repo I believe David Moreau Simard will correct me. Thanks Boris Thanks in advance. [1]: https://paste.fedoraproject.org/paste/q9gtHkmaJauZazYbj7cGSl5M1UNdIGYhyRL... -- 真実はいつも一つ！/ Always, there's only one truth! _______________________________________________ rdo-list mailing list rdo-list@redhat.com<mailto:rdo-list@redhat.comhttps://www.redhat.com/mailman/listinfo/rdo-list rdo-list Info Page - Red Hat<https://www.redhat.com/mailman/listinfo/rdo-listwww.redhat.com<http://www.redhat.comThe rdo-list mailing list provides a forum for discussions about installing, running, and using OpenStack on Red Hat based distributions. To see the collection of ... To unsubscribe: rdo-list-unsubscribe@redhat.com<mailto:rdo-list-unsubscribe@redhat.com _______________________________________________ rdo-list mailing list rdo-list@redhat.com<mailto:rdo-list@redhat.comhttps://www.redhat.com/mailman/listinfo/rdo-list To unsubscribe: rdo-list-unsubscribe@redhat.com<mailto:rdo-list-unsubscribe@redhat.com

From: David Moreau Simard <dms(a)redhat.comSent: Friday, May 12, 2017 5:21 PM To: Boris Derzhavets Cc: Neal Gompa; rdo-list(a)redhat.com Subject: Re: [rdo-list] Failures when trying to set up OpenStack Ocata all-in-one with Packstack On Fri, May 12, 2017 at 5:21 AM, Boris Derzhavets <bderzhavets@hotmail.com<mailto:bderzhavets@hotmail.com>> wrote: I cannot believe that the most recent Ocata trunk "current passed ci" won't work for packstack, unless you have made some serious changes vs RDO Newton packaging design. Packstack is part of the testing pipeline that promotes trunk repositories to "current-passed-ci", if the one of the three Packstack integration tests [1] failed, it would not have been promoted. I feel some confusion. You, actually, confirm that :- # yum install yum-plugin-priorities -y # curl -o /etc/yum.repos.d/delorean-ocata.repo \ https://trunk.rdoproject.org/centos7-ocata/current-passed-ci/delorean.repo <https://trunk.rdoproject.org/centos7-ocata/current-passed-ci/delorean.rep... curl -o /etc/yum.repos.d/delorean-deps-ocata.repo \ <https://trunk.rdoproject.org/centos7-ocata/current-passed-ci/delorean.rep... should be correct usage of trunks for packstack deployment , which picks up the most recent updates from upstream Ocata Stable. At the same time you advise against using trunks for deployment via packstack regardless they are standard TripleO QuickStart set up the undrercloud before running overcloud deployment. Seems like I cannot properly understand why you advise against trunks ? I might be unaware of changes in RDO happened since Newton's times, when another URLs were used for same purpose. I apologize in advance if i am asking stupid questions. Thank you once again. Boris. [1]: https://github.com/openstack/packstack#packstack-integration-tests David Moreau Simard Senior Software Engineer | Openstack RDO dmsimard = [irc, github, twitter]