Hi, I have a dedicated server which has 2 public ip ranges allotted to it by the DC. I am trying out OpenStack RDO on this server (allinone install), and I was able to assign one of the mentioned ranges (let's say 173.xxx.xxx.144/29) and managed to use up all the available ips in this range for a few vms. This floating-ip range is now accessible from outside, and everything is fine. [root@mycloud ~(keystone_admin)]# neutron net-list +--------------------------------------+---------+---------------------------------------------------------+ | id | name | subnets | +--------------------------------------+---------+---------------------------------------------------------+ | 09c8da8e-79d7-49e1-9af8-c2a13a032040 | private | | b7eeae38-682a-4397-8b3c-e3dee88527ab 10.0.0.0/24 | | 31956556-c540-4676-9cd4-e618a4f93fc8 | public | | 14d4b197-1121-4a4b-80b3-b8d80115f734 173.xxx.xxx.144/29 | +--------------------------------------+---------+---------------------------------------------------------+ [root@yocloud ~(keystone_admin)]# neutron subnet-list +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ | id | name | cidr | allocation_pools | +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ | b7eeae38-682a-4397-8b3c-e3dee88527ab | private_subnet | 10.0.0.0/24 | | {"start": "10.0.0.2", "end": "10.0.0.254"} | | 14d4b197-1121-4a4b-80b3-b8d80115f734 | public_subnet | 173.xxx.xxx.144/29 | | {"start": "173.xxx.xxx.147", "end": "173.xxx.xxx.150"} | +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ I am now looking to use the second public ip range for next vms and I am not sure how to proceed. I tried to create a subnet (public_subnet2) inside "public" net for the new ip block but fail to get it working. Neutron does not appear to know that it has a few more free floating-ips available, and throws 'No more IP addresses available on network'. Can someone point to the right direction? Is it not possible to add multiple subnets inside a public network?

Regards, Vimal _______________________________________________ Rdo-list mailing list Rdo-list(a)redhat.com https://www.redhat.com/mailman/listinfo/rdo-list

Hi Assaf, Thank you for responding. This was a single node install (packstack --allinone) with only 1 eth (eth0). So eth0 is already assigned a public ip address (which is later moved to br-ex as required during Openstack installation). The initial IP range allotted by Datacenter was: 173.xxx.xxx.144/29, so 173.xxx.xxx.146 is eth0. Now, the free ips that can be assigned are: 173.xxx.xxx.147-.150. These ips were used up by the few VMs (and a ovs router). So next, the DC assigned another block of ips which is of an entirely different subnet, **and making the second ip range work in a single node install was a pain for me** I asked about this particular error in the OpenStack list with no response, so maybe I was doing something really stupid. http://lists.openstack.org/pipermail/openstack/2014-June/007987.html .. and.. http://lists.openstack.org/pipermail/openstack/2014-June/007992.html Even after adding another public subnet (neutron subnet-create ..), I was unable to "interface-attach", with error saying that no free IPs are available, where as in reality: 1. private network has lot of ips available 2. First public subnet is full 3. Second subnet is already added in public net, and it has free ips available. From logs it was evident that "Interface-attach" action was complaining about a public subnet being full (Shouldn't it simply create eth1 and assign a private IP? Why the heck should it complain about a public subnet being full?) I was hitting some kind of port-limit there but I do not recollect what I did to fix it (apparently I spent a couple of days testing things out so not sure what eventually fixed it). I finally added one ip from the second public subnet to br-ex, and then created a public subnet with the rest of the ips on that range with gateway set to this ip on br-ex and it worked. I hope this is how it can be done.

Also, your blog on Openvswitch and Openstack networking is undoubtedly the best ever explanation of how networking works in OpenStack. I noted down every word and pic from your blog (on topics: ovs & gre) in my notebook, read and re-read them some 10-15 times and I can confidently say I have a better understanding on these things now than when I posted this query (a week ago, that is). Do keep writing, please!

I successfully tested out a 3-node OpenStack install earlier today, and your notes on GRE helped me in troubleshooting like a pro :-) Regards, Vimal On Sun, Jun 29, 2014 at 2:58 PM, Assaf Muller <amuller(a)redhat.com&gt; wrote: > Hi Vimal, > > Answers inline. > > ----- Original Message ----- > > Hi, > > > > I have a dedicated server which has 2 public ip ranges allotted to it by > the > > DC. I am trying out OpenStack RDO on this server (allinone install), and > I > > was able to assign one of the mentioned ranges (let's say > > 173.xxx.xxx.144/29) and managed to use up all the available ips in this > > range for a few vms. This floating-ip range is now accessible from > outside, > > and everything is fine. > > > > [root@mycloud ~(keystone_admin)]# neutron net-list > > > +--------------------------------------+---------+---------------------------------------------------------+ > > | id | name | subnets | > > > +--------------------------------------+---------+---------------------------------------------------------+ > > | 09c8da8e-79d7-49e1-9af8-c2a13a032040 | private | > > | b7eeae38-682a-4397-8b3c-e3dee88527ab 10.0.0.0/24 | > > | 31956556-c540-4676-9cd4-e618a4f93fc8 | public | > > | 14d4b197-1121-4a4b-80b3-b8d80115f734 173.xxx.xxx.144/29 | > > > +--------------------------------------+---------+---------------------------------------------------------+ > > > > [root@yocloud ~(keystone_admin)]# neutron subnet-list > > > +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ > > | id | name | cidr | allocation_pools | > > > +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ > > | b7eeae38-682a-4397-8b3c-e3dee88527ab | private_subnet | 10.0.0.0/24 | > > | {"start": "10.0.0.2", "end": "10.0.0.254"} | > > | 14d4b197-1121-4a4b-80b3-b8d80115f734 | public_subnet | > 173.xxx.xxx.144/29 | > > | {"start": "173.xxx.xxx.147", "end": "173.xxx.xxx.150"} | > > > +--------------------------------------+----------------+--------------------+--------------------------------------------------------+ > > > > I am now looking to use the second public ip range for next vms and I am > not > > sure how to proceed. > > > > I tried to create a subnet (public_subnet2) inside "public" net for the > new > > ip block but fail to get it working. Neutron does not appear to know > that it > > has a few more free floating-ips available, and throws 'No more IP > addresses > > available on network'. > > > > Can someone point to the right direction? Is it not possible to add > multiple > > subnets inside a public network? > > When exactly do you fail? When I run neutron floatingip-create <public > network> > it successfully creates floating IPs from the first subnet, then when that > runs > out it starts creating FIPs on the second subnet. > > > > > Regards, > > Vimal > > > > _______________________________________________ > > Rdo-list mailing list > > Rdo-list(a)redhat.com > > https://www.redhat.com/mailman/listinfo/rdo-list > > >