9:42 a.m.
Yes, I've installed.
----- Messaggio originale -----
Da: Yogev Rabl <yrabl(a)redhat.com>
A: Walter Valenti <waltervalenti(a)yahoo.it>
Cc:
Inviato: Giovedì 15 Gennaio 2015 16:30
Oggetto: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
did you install ceph-common & python-ceph?
----- Original Message -----
> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
> To: "Yogev Rabl" <yrabl(a)redhat.com>
> Sent: Thursday, January 15, 2015 5:08:51 PM
> Subject: Re: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
>
> Yes, with enabled_backends = rbd,
> Cinder-Volume tries to use Ceph, but now I've
> got the following error:
>
> WARNING cinder.volume.manager [-] Unable to update volume replication
status,
> RBDDriver -1.1.0 (config name rbd) driver is uninitialized.
>
>
>
> Walter
>
>
>
>
>
>
> ----- Messaggio originale -----
> > Da: Yogev Rabl <yrabl(a)redhat.com>
> > A: waltervalenti(a)yahoo.itYe
> > Cc:
> > Inviato: Giovedì 15 Gennaio 2015 14:18
> > Oggetto: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >
> > Hi Walter,
> >
> > You this configuration is incorrect from what I know.
> >
> > try this:
> >
> > [DEFAULT]
> >
> > enabled_backends = rbd
> >
> > [rbd]
> > volume_driver=cinder.volume.drivers.rbd.RBDDriver
> > rbd_pool=volumes
> > rbd_ceph_conf=etc/ceph/ceph.conf
> > rbd_flatten_volume_from_snapshot=false
> > rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf747
> > rbd_max_clone_depth=5
> > rbd_store_chunk_size=4
> > rados_connect_timeout=-1
> >
> >
> > In addition, I've just finish to write a small tool in python that
> > configures Ceph in Openstack components configuration files (and set
the
> > pools +
> > keyrings in the Ceph server).
> > You can have a look at it in github:
> > https://github.com/yorabl/Openstack-Ceph
> >
> > Good luck,
> > Yogev Rabl
> > Quality Engineer,
> > RHOS storage
> > Red Hat
> >
> >> ----- Forwarded Message -----
> >> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
> >> To: rdo-list(a)redhat.com
> >> Sent: Thursday, January 15, 2015 1:04:58 PM
> >> Subject: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >>
> >> Hi,
> >> we're trying Juno with Ceph (Giant) integration on Centos7.
> >>
> >> The problem is that Cinder-Volume ignores, the directives
> >> for use rbd protocol, but every uses LVM.
> >>
> >> This is our rbd configuration in cinder.conf:
> >>
> >> [DEFAULT]
> >>
> >> volume_driver=cinder.volume.drivers.rbd.RBDDriver
> >> [rbd]
> >> rbd_pool=volumes
> >> rbd_user=cinder
> >> rbd_ceph_conf=etc/ceph/ceph.conf
> >> rbd_flatten_volume_from_snapshot=false
> >> rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf7471
> >> rbd_max_clone_depth=5
> >> rbd_store_chunk_size=4
> >> rados_connect_timeout=-1
> >>
> >> We also tried with all configuration in "rdb" section,
and
> >> with all configuration in DEFAULT section, but the problem is the
same.
> >>
> >>
> >> Any ideas??
> >>
> >> Thanks
> >> Walter
> >>
> >> _______________________________________________
> >> Rdo-list mailing list
> >> Rdo-list(a)redhat.com
> >> https://www.redhat.com/mailman/listinfo/rdo-list
> >>
> >
>
9:53 a.m.
New subject: [Rdo-list] Problem with Cinder (Juno) and Ceph
Did you go through 4th point in section, Install Virtualization for Ceph Block Devices, in
this manual: https://openstack.redhat.com/Using_Ceph_for_block_storage_with_RDO ?
Yogev
----- Original Message -----
From: "Walter Valenti" <waltervalenti(a)yahoo.it>
To: "Yogev Rabl" <yrabl(a)redhat.com>
Cc: rdo-list(a)redhat.com
Sent: Thursday, January 15, 2015 5:42:03 PM
Subject: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
Yes, I've installed.
----- Messaggio originale -----
> Da: Yogev Rabl <yrabl(a)redhat.com>
> A: Walter Valenti <waltervalenti(a)yahoo.it>
> Cc:
> Inviato: Giovedì 15 Gennaio 2015 16:30
> Oggetto: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
>
> did you install ceph-common & python-ceph?
>
>
> ----- Original Message -----
>> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
>> To: "Yogev Rabl" <yrabl(a)redhat.com>
>> Sent: Thursday, January 15, 2015 5:08:51 PM
>> Subject: Re: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
>>
>> Yes, with enabled_backends = rbd,
>> Cinder-Volume tries to use Ceph, but now I've
>> got the following error:
>>
>> WARNING cinder.volume.manager [-] Unable to update volume replication
> status,
>> RBDDriver -1.1.0 (config name rbd) driver is uninitialized.
>>
>>
>>
>> Walter
>>
>>
>>
>>
>>
>>
>> ----- Messaggio originale -----
>> > Da: Yogev Rabl <yrabl(a)redhat.com>
>> > A: waltervalenti(a)yahoo.itYe
>> > Cc:
>> > Inviato: Giovedì 15 Gennaio 2015 14:18
>> > Oggetto: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
>> >
>> > Hi Walter,
>> >
>> > You this configuration is incorrect from what I know.
>> >
>> > try this:
>> >
>> > [DEFAULT]
>> >
>> > enabled_backends = rbd
>> >
>> > [rbd]
>> > volume_driver=cinder.volume.drivers.rbd.RBDDriver
>> > rbd_pool=volumes
>> > rbd_ceph_conf=etc/ceph/ceph.conf
>> > rbd_flatten_volume_from_snapshot=false
>> > rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf747
>> > rbd_max_clone_depth=5
>> > rbd_store_chunk_size=4
>> > rados_connect_timeout=-1
>> >
>> >
>> > In addition, I've just finish to write a small tool in python that
>> > configures Ceph in Openstack components configuration files (and set
> the
>> > pools +
>> > keyrings in the Ceph server).
>> > You can have a look at it in github:
>> > https://github.com/yorabl/Openstack-Ceph
>> >
>> > Good luck,
>> > Yogev Rabl
>> > Quality Engineer,
>> > RHOS storage
>> > Red Hat
>> >
>> >> ----- Forwarded Message -----
>> >> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
>> >> To: rdo-list(a)redhat.com
>> >> Sent: Thursday, January 15, 2015 1:04:58 PM
>> >> Subject: [Rdo-list] Problem with Cinder (Juno) and Ceph
>> >>
>> >> Hi,
>> >> we're trying Juno with Ceph (Giant) integration on
Centos7.RBDDriver -1.1.0 (config name rbd) driver is uninitialized
>> >>
>> >> The problem is that Cinder-Volume ignores, the directives
>> >> for use rbd protocol, but every uses LVM.
>> >>
>> >> This is our rbd configuration in cinder.conf:
>> >>
>> >> [DEFAULT]
>> >>
>> >> volume_driver=cinder.volume.drivers.rbd.RBDDriver
>> >> [rbd]
>> >> rbd_pool=volumes
>> >> rbd_user=cinder
>> >> rbd_ceph_conf=etc/ceph/ceph.conf
>> >> rbd_flatten_volume_from_snapshot=false
>> >> rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf7471
>> >> rbd_max_clone_depth=5
>> >> rbd_store_chunk_size=4
>> >> rados_connect_timeout=-1
>> >>
>> >> We also tried with all configuration in "rdb" section,
> and
>> >> with all configuration in DEFAULT section, but the problem is the
> same.
>> >>
>> >>
>> >> Any ideas??
>> >>
>> >> Thanks
>> >> Walter
>> >>
>> >> _______________________________________________
>> >> Rdo-list mailing list
>> >> Rdo-list(a)redhat.com
>> >> https://www.redhat.com/mailman/listinfo/rdo-list
>> >>
>> >
>>
>
10:29 a.m.
New subject: [Rdo-list] Problem with Cinder (Juno) and Ceph
I've followed directly the ceph documentation.
Reading the RDO documentation, at point 4 of
"Install Virtualization for Ceph Block Devices" tells:
Older releases of RHEL and CentOS don't provide the rbd format required for use with
Ceph.
Now, I think: Centos7 isn't a older release.
But the execution of "qemu-img -f", give me:
vvfat vpc vmdk vhdx vdi sheepdog sheepdog sheepdog raw host_cdrom host_floppy host_device
file qed qcow2 qcow parallels nbd nbd nbd iscsi gluster gluster gluster gluster dmg cow
cloop bochs blkverify blkdebug
There isn't "rdb".... Why ????
Walter
----- Messaggio originale -----
Da: Yogev Rabl <yrabl(a)redhat.com>
A: Walter Valenti <waltervalenti(a)yahoo.it>
Cc: rdo-list(a)redhat.com
Inviato: Giovedì 15 Gennaio 2015 16:53
Oggetto: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
Did you go through 4th point in section, Install Virtualization for Ceph Block
Devices, in this manual:
https://openstack.redhat.com/Using_Ceph_for_block_storage_with_RDO ?
Yogev
----- Original Message -----
> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
> To: "Yogev Rabl" <yrabl(a)redhat.com>
> Cc: rdo-list(a)redhat.com
> Sent: Thursday, January 15, 2015 5:42:03 PM
> Subject: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
>
>
>
> Yes, I've installed.
>
>
>
>
>
> ----- Messaggio originale -----
> > Da: Yogev Rabl <yrabl(a)redhat.com>
> > A: Walter Valenti <waltervalenti(a)yahoo.it>
> > Cc:
> > Inviato: Giovedì 15 Gennaio 2015 16:30
> > Oggetto: Re: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >
> > did you install ceph-common & python-ceph?
> >
> >
> > ----- Original Message -----
> >> From: "Walter Valenti" <waltervalenti(a)yahoo.it>
> >> To: "Yogev Rabl" <yrabl(a)redhat.com>
> >> Sent: Thursday, January 15, 2015 5:08:51 PM
> >> Subject: Re: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >>
> >> Yes, with enabled_backends = rbd,
> >> Cinder-Volume tries to use Ceph, but now I've
> >> got the following error:
> >>
> >> WARNING cinder.volume.manager [-] Unable to update volume
replication
> > status,
> >> RBDDriver -1.1.0 (config name rbd) driver is uninitialized.
> >>
> >>
> >>
> >> Walter
> >>
> >>
> >>
> >>
> >>
> >>
> >> ----- Messaggio originale -----
> >> > Da: Yogev Rabl <yrabl(a)redhat.com>
> >> > A: waltervalenti(a)yahoo.itYe
> >> > Cc:
> >> > Inviato: Giovedì 15 Gennaio 2015 14:18
> >> > Oggetto: Fwd: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >> >
> >> > Hi Walter,
> >> >
> >> > You this configuration is incorrect from what I know.
> >> >
> >> > try this:
> >> >
> >> > [DEFAULT]
> >> >
> >> > enabled_backends = rbd
> >> >
> >> > [rbd]
> >> > volume_driver=cinder.volume.drivers.rbd.RBDDriver
> >> > rbd_pool=volumes
> >> > rbd_ceph_conf=etc/ceph/ceph.conf
> >> > rbd_flatten_volume_from_snapshot=false
> >> > rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf747
> >> > rbd_max_clone_depth=5
> >> > rbd_store_chunk_size=4
> >> > rados_connect_timeout=-1
> >> >
> >> >
> >> > In addition, I've just finish to write a small tool in
python that
> >> > configures Ceph in Openstack components configuration files
(and set
> > the
> >> > pools +
> >> > keyrings in the Ceph server).
> >> > You can have a look at it in github:
> >> > https://github.com/yorabl/Openstack-Ceph
> >> >
> >> > Good luck,
> >> > Yogev Rabl
> >> > Quality Engineer,
> >> > RHOS storage
> >> > Red Hat
> >> >
> >> >> ----- Forwarded Message -----
> >> >> From: "Walter Valenti"
<waltervalenti(a)yahoo.it>
> >> >> To: rdo-list(a)redhat.com
> >> >> Sent: Thursday, January 15, 2015 1:04:58 PM
> >> >> Subject: [Rdo-list] Problem with Cinder (Juno) and Ceph
> >> >>
> >> >> Hi,
> >> >> we're trying Juno with Ceph (Giant) integration on
Centos7.RBDDriver -1.1.0 (config name rbd) driver is uninitialized
> >> >>
> >> >> The problem is that Cinder-Volume ignores, the
directives
> >> >> for use rbd protocol, but every uses LVM.
> >> >>
> >> >> This is our rbd configuration in cinder.conf:
> >> >>
> >> >> [DEFAULT]
> >> >>
> >> >> volume_driver=cinder.volume.drivers.rbd.RBDDriver
> >> >> [rbd]
> >> >> rbd_pool=volumes
> >> >> rbd_user=cinder
> >> >> rbd_ceph_conf=etc/ceph/ceph.conf
> >> >> rbd_flatten_volume_from_snapshot=false
> >> >> rbd_secret_uuid=ac94d7df-4271-4080-b1fd-8cf577bf7471
> >> >> rbd_max_clone_depth=5
> >> >> rbd_store_chunk_size=4
> >> >> rados_connect_timeout=-1
> >> >>
> >> >> We also tried with all configuration in "rdb"
section,
> > and
> >> >> with all configuration in DEFAULT section, but the
problem is the
> > same.
> >> >>
> >> >>
> >> >> Any ideas??
> >> >>
> >> >> Thanks
> >> >> Walter
> >> >>
> >> >> _______________________________________________
> >> >> Rdo-list mailing list
> >> >> Rdo-list(a)redhat.com
> >> >> https://www.redhat.com/mailman/listinfo/rdo-list
> >> >>
> >> >
> >>
> >
>
3410
days inactive
3410
days old
2 comments
2 participants
participants (2)
-
Walter Valenti -
Yogev Rabl