Thank you! In case anyone is interested in following this bug: https://bugzilla. redhat.com/show_bug.cgi?id=1353976 Ilja From: Boris Derzhavets [mailto:bderzhavets@hotmail.com]  Sent: Friday, July 08, 2016 10:21 AM To: Ilja Maslov <imaslov(a)dispersivegroup.com>; rdo-list(a)redhat.com Subject: Re: tripleo centos7 images missing linux-firmware package From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on behalf of Ilja Maslov <imaslov(a)dispersivegroup.com&gt; Sent: Friday, July 8, 2016 7:46 AM To: rdo-list(a)redhat.com Subject: [rdo-list] tripleo centos7 images missing linux-firmware package Hi, I’ve noticed that tripleo built/CI images do not have linux-firmware package installed since they are based on the Centos 7 generic cloud image. This causes a lot of pain with the baremetal deployments that depend on the firmware to be present (in my case, bnx2 firmware is missing which causes introspection and overcloud deployment to fail, because PXE-booted images lose all network connectivity the moment networking is initialized from the image with messages like “bnx2: Can’t load firmware file “bnx2/bnx2-rv2p-09ax-6.0.17.fw”. Is there a good overview of the typical decision tree on where to open a bug, for which component, etc? File bug against openstack-tripleo at https://bugzilla.redhat.com/ Select version ( the one affected ) Hardware Severity Just follow instructions on bug's blank Boris. BTW. Here is a sample https://bugzilla.redhat.com/show_bug.cgi?id=1330289 Bug 1330289 – Failure to install Controller/Network ... bugzilla.redhat.com Red Hat Bugzilla – Bug 1330289. Failure to install Controller/Network&&Compute Cluster on RDO Mitaka with keystone API V3. Last modified: 2016-05-21 17:20:31 EDT Thanks, Ilja

Thanks! I've been using guestmount + chroot to achieve the same :) How do I install linux-firmware in the IPA ramdisk? I do not think that libguestfs tools work with these and if I gunzip -c | cpio -id and then re-assemble, the image is not working anymore (kernel crashes). Ilja -----Original Message----- From: Christopher Brown [mailto:cbrown2@ocf.co.uk] Sent: Friday, July 08, 2016 11:43 AM To: rdo-list(a)redhat.com; Ilja Maslov <imaslov(a)dispersivegroup.com>; b derzhavets(a)hotmail.com Subject: Re: [rdo-list] tripleo centos7 images missing linux-firmware package Hi Ilja, Whilst it doesn't help fix the underlying issue, as a workaround you can use virt-customize to add this package in prior to uploading the overcloud image which is a fairly trivial task. E.g. $ virt-customize -a overcloud-full.qcow2 --install linux-firmware ... $ openstack overcloud image upload --update-existing This article is a good reference although it requires a Red Hat account: https://access.redhat.com/articles/1556833 Regards On Fri, 2016-07-08 at 16:14 +0100, Ilja Maslov wrote: > Thank you! > > In case anyone is interested in following this bug: https://bugzill > a. > redhat.com/show_bug.cgi?id=1353976 > > Ilja > > From: Boris Derzhavets [mailto:bderzhavets@hotmail.com] > Sent: Friday, July 08, 2016 10:21 AM > To: Ilja Maslov <imaslov(a)dispersivegroup.com>; rdo-list(a)redhat.com > Subject: Re: tripleo centos7 images missing linux-firmware package > > > > > From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on > behalf of Ilja Maslov <imaslov(a)dispersivegroup.com&gt; > Sent: Friday, July 8, 2016 7:46 AM > To: rdo-list(a)redhat.com > Subject: [rdo-list] tripleo centos7 images missing linux-firmware > package > > Hi, > > I’ve noticed that tripleo built/CI images do not have linux- > firmware > package installed since they are based on the Centos 7 generic > cloud > image. > > This causes a lot of pain with the baremetal deployments that > depend > on the firmware to be present (in my case, bnx2 firmware is missing > which causes introspection and overcloud deployment to fail, > because > PXE-booted images lose all network connectivity the moment > networking > is initialized from the image with messages like “bnx2: Can’t load > firmware file “bnx2/bnx2-rv2p-09ax-6.0.17.fw”. > > Is there a good overview of the typical decision tree on where to > open > a bug, for which component, etc? > > File bug against openstack-tripleo at https://bugzilla.redhat.co > m/ > Select version ( the one affected ) > Hardware > Severity > Just follow instructions on bug's blank > > Boris. > BTW. Here is a sample > https://bugzilla.redhat.com/show_bug.cgi?id=1330289 > > > Bug 1330289 – Failure to install Controller/Network ... > > bugzilla.redhat.com > > Red Hat Bugzilla – Bug 1330289. Failure to install > Controller/Network&&Compute Cluster on RDO Mitaka with keystone API > V3. Last modified: 2016-05-21 17:20:31 EDT > > > Thanks, > Ilja -- Regards, Christopher Brown OpenStack Engineer OCF plc Tel: +44 (0)114 257 2200 Web: www.ocf.co.uk Blog: blog.ocf.co.uk Twitter: @ocfplc Please note, any emails relating to an OCF Support request must always be sent to support(a)ocf.co.uk for a ticket number to be generated or existing support ticket to be updated. Should this not be done then OCF cannot be held responsible for requests not dealt with in a timely manner. OCF plc is a company registered in England and Wales. Registered number 4132533, VAT number GB 780 6803 14. Registered office address: OCF plc, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, Sheffield S35 2PG. This message is private and confidential. If you have received this message in error, please notify us immediately and remove it from your system.