[Rdo-list] Outbound packet traffic with nova-network

Hi list. I'm having some trouble with my network setup and I thought maybe the group could help. I have three compute nodes with two network interfaces. There's a private 192.168.32.0/24 network (fixed range) on eth1 and a 10.17.12.128/25 network (floating range) on eth0 on these nodes. Networking works as expected. Connectivity is good on the 192 network and traffic is forwarded from the floating range inbound to the fixed range correctly. That is, I can ssh into an instance from the outside world using the floating address. However, when traffic is leaving the instance, it doesn't seem to get translated. Here's a concrete example: Instance has a fixed address of 192.168.32.4. Instance is assigned a floating address of 10.17.12.139. Instance is running on a hypervisor with the address 10.17.12.12. Pings from the instance to 10.17.12.12 return fine, but pings from the instance out to the internet don't work. When I run a tcpdump, I see that the pings reach the destination with the source address set to 192.168.32.4: [root(a)10.17.12.11 ~]# tcpdump -n -i eth0 icmp tcpdump: WARNING: eth0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:55:38.238739 IP 192.168.32.4 > 10.17.12.11: ICMP echo request, id 45321, seq 1, length 64 23:55:38.238774 IP 10.17.12.11 > 192.168.32.4: ICMP echo reply, id 45321, seq 1, length 64 Is this expected? If so, is there any way to get nova-network to translate the outbound traffic so that it looks like it's coming from 10.17.12.139 instead of 192.168.32.4? Thanks. Michael. -- Michael Solberg Principal Architect, Red Hat, Inc.