9:11 a.m.
The exact command here is not important because we primarily discovered this issue through
Horizon.
disk_format and (I think) container_format MUST be given when image is created, otherwise
Glance API server would not accept them if you omit it.
I tried adding image without disk_format and it is rejected. When I add an image with
disk_format specified, image is correctly downloaded and saved but disk_format property is
not saved to the database. Same with container_format and is_public. The only property
that is saved is the name of the image.
Therefore I think the problem is not related to any sort of client (command) but the
server itself, no client is able to omit disk_format property.
I ran Glance Registry in sqlachemy debug mode and pasted SQL queries before - they lack
values for these properties.
We started to experience this problem 2 weeks ago after we reinstalled everything again
according to Ansible recipe (so in fact all the configuration is the same). If there was a
package update in that time it seems like the only reason for anything to change.
Regards,
Daniel Speichert
----- Original Message -----
From: "Flavio Percoco" <flavio(a)redhat.com>
To: "Daniel Speichert" <daniel(a)speichert.pl>
Cc: "Tzach Shefi" <tshefi(a)redhat.com>, rdo-list(a)redhat.com
Sent: Monday, February 3, 2014 2:46:17 AM
Subject: Re: [Rdo-list] Glance does not save properties of images
On 03/02/14 05:59 +0100, Daniel Speichert wrote:
>Yes, I tested that with an admin user. The bigger problem that
>is_public is that required disk_format and container_format are
>lost too.
This sounds like a bigger problem, though.
What do you mean with `disk_format` and `container_format` are lost?
for what command? Could you please share the exact command you're
running?
Notice that some of these parameters are available at creation time
but not as part of updates. That said, I recall you said it used to
work and stopped working after you updated / reinstalled your system.
Thanks!
flaper
>
>Regards,
>Daniel Speichert
>The e
>----- Original Message -----
>> From: "Tzach Shefi" <tshefi(a)redhat.com>
>> To: "Daniel Speichert" <daniel(a)speichert.pl>
>> Cc: "Flavio Percoco" <flavio(a)redhat.com>, rdo-list(a)redhat.com
>> Sent: Sunday, February 2, 2014 10:43:49 AM
>> Subject: Re: [Rdo-list] Glance does not save properties of images
>>
>> Unfortunately don't have other ideas, I'll try a setup with Rabbit
>> just to make sure this isn't the cause.
>>
>> A long shoot but i'll ask any way the user that set is_public
>> param,
>> has admin permissions right?
>> http://docs.openstack.org/developer/glance/glanceapi.html
>>
>> "Use of the is_public parameter is restricted to admin users. For
>> all
>> other users it will be ignored."
>>
>> Regards,
>> Tzach
>>
>>
>> ----- Original Message -----
>> From: "Daniel Speichert" <daniel(a)speichert.pl>
>> To: "Tzach Shefi" <tshefi(a)redhat.com>
>> Cc: "Flavio Percoco" <flavio(a)redhat.com>, rdo-list(a)redhat.com
>> Sent: Thursday, January 30, 2014 6:01:26 PM
>> Subject: Re: [Rdo-list] Glance does not save properties of images
>>
>> Yes, Ceph is working well as backend (images are uploaded there
>> successfully and retrieved as well).
>> The same problem occurs also when the image is kept locally
>> (default_store = file).
>>
>> We have checked multiple images and the problem is the same.
>> Interestingly, we had the same setup before (we reinstalled last
>> week) and it was working fine. That makes me think that something
>> might be different in the package.
>>
>> We use rabbit and it seems to be working fine - ceilometer is
>> getting
>> these notifications.
>>
>> Do you have any other ideaas? I'm running the latest package
>> version
>> form RDO.
>>
>> Thanks,
>> Daniel Speichert
>>
>> ----- Original Message -----
>> > From: "Tzach Shefi" <tshefi(a)redhat.com>
>> > To: "Daniel Speichert" <daniel(a)speichert.pl>
>> > Cc: "Flavio Percoco" <flavio(a)redhat.com>,
rdo-list(a)redhat.com
>> > Sent: Thursday, January 30, 2014 7:22:58 AM
>> > Subject: Re: [Rdo-list] Glance does not save properties of
>> > images
>> >
>> > Hello Daniel,
>> >
>> > On your posted glance-api.con noticed default_store = rbd,
>> > assuming
>> > Glance back end is CEPH (correct?).
>> >
>> > Just installed AIO RDO Havana on RHEL 6.5.
>> > Is_public updated successfully via Horizon\CLI, image shows up
>> > as
>> > public on Horizon\image-show.
>> >
>> >
>> > I'm assuming (the obvious..) that you checked this on more than
>> > just
>> > that one image, eliminates a single bad image as source of this
>> > problem.
>> > BTW what type\source of image was used\checked?
>> >
>> > Another difference in setups mine notifier_strategy =QPID your's
>> > uses
>> > rabbit.
>> >
>> > Regards,
>> > Tzach
>> >
>> > ----- Original Message -----
>> > From: "Daniel Speichert" <daniel(a)speichert.pl>
>> > To: "Flavio Percoco" <flavio(a)redhat.com>
>> > Cc: rdo-list(a)redhat.com
>> > Sent: Wednesday, January 29, 2014 4:30:56 PM
>> > Subject: [Rdo-list] Glance does not save properties of images
>> >
>> > ----- Original Message -----
>> > > From: "Flavio Percoco" <flavio(a)redhat.com>
>> > > To: "Daniel Speichert" <daniel(a)speichert.pl>
>> > > Cc: "Lars Kellogg-Stedman" <lars(a)redhat.com>,
>> > > rdo-list(a)redhat.com
>> > > Sent: Tuesday, January 28, 2014 3:37:27 AM
>> > > Subject: Re: [Rdo-list] Glance does not save properties of
>> > > images
>> > >
>> > >
>> > > Could you please share the commands your using?
>> > >
>> > > - How are you adding the properties?
>> > > - How are you reading the propoerties?
>> > >
>> > > You're sharing your registry.log configurations which means
>> > > you've
>> > > configured the registry. Could you share how you did that?
>> > >
>> > > Thanks,
>> > > flaper
>> > >
>> >
>> > These are required properties when adding any Glance image
>> > (disk_format and container_format). I was trying to set
>> > is_public
>> > through 'glance image-edit' and Horizon. The change seems to be
>> > accepted (no error) but on subsequent image-show it's just not
>> > there.
>> >
>> > Registry and API are set up almost by defaults:
>> > glance-registry.conf: http://pastebin.com/M7Ybjnf9
>> > glance-api.conf: http://pastebin.com/5sPXr3mG
>> >
>> > Regards,
>> > Daniel Speichert
>> >
>> > _______________________________________________
>> > Rdo-list mailing list
>> > Rdo-list(a)redhat.com
>> > https://www.redhat.com/mailman/listinfo/rdo-list
>> >
>>
--
@flaper87
Flavio Percoco