True, check that Maarten, it’s on the guide to “boot a VM” after setting up everything.  
--  
Miguel Angel Ajo
Sent with Sparrow (
 Ping and ssh are disabled in the default security group.
  
 Thanks,
 Kevin  
   
 From: rdo-list-bounces(a)redhat.com (mailto:rdo-list-bounces@redhat.com) on behalf of
Maarten Hoes
 Sent: Friday, June 05, 2015 7:53:27 AM
 To: Miguel Angel Ajo
 Cc: rdo-list(a)redhat.com (mailto:rdo-list@redhat.com)
 Subject: Re: [Rdo-list] RDO with existing external network
  
 Hi,
  
  
 Thanks again for the update and effort.
  
 The guide works (produces no errors), but ...
  
 When I try to connect to the launched instance with either ping or ssh, I get these
errors:
  
 # ping 192.168.178.52
 PING 192.168.178.52 (192.168.178.52) 56(84) bytes of data.
 From 192.168.178.23 icmp_seq=1 Destination Host Unreachable
  
 # ssh 192.168.178.52
 ssh: connect to host 192.168.178.52 port 22: No route to host
  
 I guess it has something to do with my setup ?
  
  
 - Maarten
  
  
  
 On Fri, Jun 5, 2015 at 4:08 PM, Miguel Angel Ajo <mangelajo(a)redhat.com
(mailto:mangelajo@redhat.com)> wrote:
 > Could you try now?,   
 >  
 > 
https://www.rdoproject.org/Neutron_with_existing_external_network  
 >  
 > Let me know if it works for you, here it does work.  
 >  
 > On Friday 5 June 2015 at 15:36, Maarten Hoes wrote:
 >  
 > > Hi,
 > >  
 > >  
 > > Thanks, that would be great.  
 > >  
 > >  
 > > - Maarten
 > >  
 > >  
 > >  
 > > On Fri, Jun 5, 2015 at 3:17 PM, Miguel Angel Ajo <mangelajo(a)redhat.com
(mailto:mangelajo@redhat.com)> wrote:
 > > > It’s a bit rusty,   
 > > >  
 > > > I’m working in an updated version,   
 > > >  
 > > > To start, I want to remove replication from the quickstart guide, so I’ll
add a reference to Steps 1-2 from there, and then separate steps from there.  
 > > >  
 > > >  
 > > >  
 > > > --   
 > > > Miguel Angel Ajo
 > > >  
 > > >  
 > > > On Thursday 4 June 2015 at 13:57, Maarten Hoes wrote:
 > > >  
 > > > > Hi,
 > > > >  
 > > > >  
 > > > > (like asked on irc)
 > > > >  
 > > > > Im struggling with getting RDO to work with my existing network. Ive
tried to follow this guide:
 > > > >  
 > > > > 
https://www.rdoproject.org/Neutron_with_existing_external_network
 > > > >  
 > > > >  
 > > > > But cant seem to get it to work for me. Could you take a look at that
guide and see if its still accurate ?
 > > > >  
 > > > >  
 > > > >  
 > > > > Thanks,
 > > > >  
 > > > >  
 > > > >  
 > > > > - Maarten Hoes.
 > > > >  
 > > >  
 > >  
 >