Re: [Rdo-list] Attempt to reproduce https://github.com/beekhof/osp-ha-deploy/blob/master/HA-keepalived.md

________________________________________ From: Dan Sneddon <dsneddon(a)redhat.com&gt; Sent: Friday, November 13, 2015 2:46 PM To: Boris Derzhavets; Javier Pena Cc: rdo-list(a)redhat.com Subject: Re: [Rdo-list] Attempt to reproduce https://github.com/beekhof/osp-ha-deploy/blob/master/HA-keepalived.md On 11/13/2015 11:38 AM, Boris Derzhavets wrote: > I understand that in usual situation , creating ifcfg-br-ex and ifcfg-eth2 ( as OVS bridge and OVS port) , > `service network restart` should be run to make eth2 (no IP) OVS port of br-ex (any IP which belongs ext net and is available) > What bad does NetworkManager when external network provider is used ? > Disabling it, I break routing via eth0's interfaces of cluster nodes to 10.10.10.0/24 ( ext net), > so nothing is supposed to work :- > http://blog.oddbit.com/2014/05/28/multiple-external-networks-wit/ > http://dbaxps.blogspot.com/2015/10/multiple-external-networks-with-single... > Either I am missing something here. > ________________________________________ > From: rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on behalf of Boris Derzhavets <bderzhavets(a)hotmail.com&gt; > Sent: Friday, November 13, 2015 1:09 PM > To: Javier Pena > Cc: rdo-list(a)redhat.com > Subject: [Rdo-list] Attempt to reproduce https://github.com/beekhof/osp-ha-deploy/blob/master/HA-keepalived.md > > Working on this task I was able to build 3 node HAProxy/Keepalived Controller's cluster , create compute node , launch CirrOS VM, > However, I cannot ping floating IP of VM running on compute ( total 4 CentOS 7.1 VMs, nested kvm enabled ) > Looks like provider external networks doesn't work for me. > > But , to have eth0 without IP (due to `ovs-vsctl add-port br-eth0 eth0 ) still allowing to ping 10.10.10.1, > I need NetworkManager active, rather then network.service > > [root@hacontroller1 network-scripts]# systemctl status NetworkManager > NetworkManager.service - Network Manager > Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled) > Active: active (running) since Fri 2015-11-13 20:39:21 MSK; 12min ago > Main PID: 808 (NetworkManager) > CGroup: /system.slice/NetworkManager.service > ├─ 808 /usr/sbin/NetworkManager --no-daemon > └─2325 /sbin/dhclient -d -q -sf /usr/libexec/nm-dhcp-helper -pf /var/run/dhclient-eth0... > > Nov 13 20:39:22 hacontroller1.example.com NetworkManager[808]: <info> NetworkManager state is n...L > Nov 13 20:39:22 hacontroller1.example.com dhclient[2325]: bound to 10.10.10.216 -- renewal in 1...s. > Nov 13 20:39:22 hacontroller1.example.com NetworkManager[808]: <info> (eth0): Activation: succe.... > Nov 13 20:39:25 hacontroller1.example.com NetworkManager[808]: <info> startup complete > > [root@hacontroller1 network-scripts]# systemctl status network.service > network.service - LSB: Bring up/down networking > Loaded: loaded (/etc/rc.d/init.d/network) > Active: inactive (dead) > > [root@hacontroller1 network-scripts]# cat ifcfg-eth0 > TYPE="Ethernet" > BOOTPROTO="static" > NAME="eth0" > DEVICE=eth0 > ONBOOT="yes" > > [root@hacontroller1 network-scripts]# ping -c 3 10.10.10.1 > PING 10.10.10.1 (10.10.10.1) 56(84) bytes of data. > 64 bytes from 10.10.10.1: icmp_seq=1 ttl=64 time=0.087 ms > 64 bytes from 10.10.10.1: icmp_seq=2 ttl=64 time=0.128 ms > 64 bytes from 10.10.10.1: icmp_seq=3 ttl=64 time=0.117 ms > > --- 10.10.10.1 ping statistics --- > 3 packets transmitted, 3 received, 0% packet loss, time 1999ms > rtt min/avg/max/mdev = 0.087/0.110/0.128/0.021 ms > > If I disable NetworkManager and enable network this feature will be lost. Eth0 would have to have static IP or dhcp lease, > to provide route to 10.10.10.0/24. > > Thank you. > Boris. > > _______________________________________________ > Rdo-list mailing list > Rdo-list(a)redhat.com > https://www.redhat.com/mailman/listinfo/rdo-list > > To unsubscribe: rdo-list-unsubscribe(a)redhat.com > OK, a few things here. First of all, you don't actually need to have an IP address on the host system to use a VLAN or interface as an external provider network. The Neutron router will have an IP on the right network, and within its namespace will be able to reach the 10.10.10.x network. > It looks to me like NetworkManager is running dhclient for eth0, even > though you have BOOTPROTO="static". This is causing an IP address to be > added to eth0, so you are able to ping 10.10.10.x from the host. When > you turn off NetworkManager, this unexpected behavior goes away, *but > you should still be able to use provider networks*. Here I am quoting Lars Kellogg Stedman http://blog.oddbit.com/2014/05/28/multiple-external-networks-wit/ The bottom statement in blog post above states :- "This assumes that eth1 is connected to a network using 10.1.0.0/24 and eth2 is connected to a network using 10.2.0.0/24, and that each network has a gateway sitting at the corresponding .1 address."

> Try creating a Neutron router with an IP on 10.10.10.x, and then you > should be able to ping that network from the router namespace. " When I issue `neutron router-creater --ha True --tenant-id xxxxxx RouterHA` , i cannot specify router's IP "

> If you want to be able to ping 10.10.10.x from the host, then you > should put either a static IP or DHCP on the bridge, not on eth0. This > should work whether you are running NetworkManager or network.service. "I do can ping 10.0.0.x from F23 KVM Server (running cluster's VMs as Controller's nodes), it's just usual non-default libvirt subnet,matching exactly external network creating in Javier's "Howto". It was created via `virsh net-define openstackvms.xml`, but I cannot ping FIPs belong to cloud VM on this subnet."