Re: [Rdo-list] SR-IOV on openstack: no valid host is found

Hi, Anyone interested, I got it working using this procedure: http://docs-draft.openstack.org/85/213985/10/check/gate-openstack-manuals... I'm using *RDO/Juno Centos 7.1* My conf: *Controller/Network Node:* */etc/neutron/plugins/ml2/ml2_conf.ini* type_drivers = vlan tenant_network_types = vlan mechanism_drivers =openvswitch,sriovnicswitch [ml2_type_vlan] network_vlan_ranges =int-vlan:1440:1449 [securitygroup] enable_security_group = True firewall_driver = neutron.agent.firewall.NoopFirewallDriver */etc/neutron/plugins/ml2/ml2_conf_sriov.ini* [ml2_sriov] supported_pci_vendor_devs = 14e4:16af agent_required = True [sriov_nic] physical_device_mappings = int-vlan:p2p1 */etc/nova/nova.conf* [Default] scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,PciPassthroughFilter scheduler_available_filters = nova.scheduler.filters.all_filters scheduler_available_filters = nova.scheduler.filters.pci_passthrough_filter.PciPassthroughFilter */usr/lib/systemd/system/neutron-server.service* ExecStart=/usr/bin/neutron-server --config-file /usr/share/neutron/neutron-dist.conf --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini --config-file /etc/neutron/plugins/ml2/ml2_conf_sriov.ini --log-file /var/log/neutron/server.log *Compute Node:* I had to install ml2 plugin and sr-iov agent. Note, in the compute node using rdo packstack the ml2 plugin is not installed by default. # yum install openstack-neutron-ml2 openstack-neutron-sriov-nic-agent */etc/neutron/plugins/ml2/ml2_conf.ini* [securitygroup] # Controls if neutron security group is enabled or not. # It should be false when you use nova security group. # enable_security_group = True enable_security_group = True firewall_driver = neutron.agent.firewall.NoopFirewallDriver */etc/neutron/plugins/ml2/ml2_conf_sriov.ini* [securitygroup] firewall_driver = neutron.agent.firewall.NoopFirewallDriver [sriov_nic] physical_device_mappings = int-vlan:p2p1 */usr/lib/systemd/system/neutron-sriov-nic-agent.service* ExecStart=/usr/bin/neutron-sriov-nic-agent --config-file /usr/share/neutron/neutron-dist.conf --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf_sriov.ini --log-file /var/log/neutron/sriov-nic-agent.log Regards, Pedro Sousa On Tue, Aug 25, 2015 at 11:04 AM, Joe Talerico <jtaleric(a)redhat.com&gt; wrote: > > > On Monday, August 17, 2015, שחם פרידנברג <shahamf(a)gmail.com&gt; wrote: > >> Hey all, >> >> I deployed openstack on DELL PowerEdge R620 installed with Centos 7. >> >> SR-IOV is enabled in BIOS (both Virtualization Technology & SR-IOV). >> >> Also, I added the needed kernel parameters and created virtual functions >> on 82599 Intel 10G NIC. >> >> in nova.conf: >> >> 1. >> pci_passthrough_whitelist={"devname":"p2p1","physical_network":"sriovnet"} >> 2. >> scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,ComputeFilter,ComputeCapabilitiesFilter, >> ImagePropertiesFilter,CoreFilter,PciPassthroughFilter >> >> > Where did you supply the whitelist? > > Also, after making the whitelist change did you check the > nova-compute.log? It typically reports the PCI devices that can be used for > instances. > > Joe > > > >> in ml2_conf.ini: >> >> 1. type_drivers = vxlan,vlan >> 2. mechanism_drivers =openvswitch,sriovnicswitch >> 3. network_vlan_ranges = sriovnet:80:90 >> in ml2_conf_sriov.ini: >> >> 1. supported_pci_vendor_devs = 8086:10ed >> 2. agent_required = False >> in neutron-server.service: >> >> 1. ExecStart=/usr/bin/neutron-server --config-file >> /usr/share/neutron/neutron-dist.conf --config-dir /usr/share/neutron/server >> --config-file /etc/neutron/neutron.conf --config-file >> /etc/neutron/plugin.ini >> --config-file /etc/neutron/plugins/ml2/ml2_conf_sriov.ini --config-dir >> /etc/neutron/conf.d/neutron-server >> --log-file /var/log/neutron/server.log >> >> created Network based on physical network I defined (sriovnet), >> configured subnet and created direct type port. >> >> When I creating an image (nova boot --flavor m1.large --image my_img >> --nic port-id=087ff574-fb14-47fd-82cb-454f176154ff test_sriov) >> >> I get the following error: >> >> Traceback (most recent call last): >> >> File "/usr/lib/python2.7/site-packages/oslo_messaging/rpc/server.py", >> line 142, in inner >> return func(*args, **kwargs) >> >> File "/usr/lib/python2.7/site-packages/nova/scheduler/manager.py", >> line 86, in select_destinations >> filter_properties) >> >> File >> "/usr/lib/python2.7/site-packages/nova/scheduler/filter_scheduler.py", line >> 80, in select_destinations >> raise exception.NoValidHost(reason=reason) >> >> NoValidHost: No valid host was found. There are not enough hosts >> available. >> >> 2015-08-18 04:28:22.886 17998 WARNING nova.scheduler.utils >> [req-5804960b-4614-4d0e-9a3d-a94964cf93f8 caf2b9813205455896e60c6d00c92b4d >> 4bd6b22041ef4123958a0f85c775b770 - - -] [instance: >> 470e16f9-002f-4ae4-82f4-17a83a93d860] Setting instance to ERROR state. >> >> Any idea what might be the problem here? >> >> Thanks, >> Shaham >> > > _______________________________________________ > Rdo-list mailing list > Rdo-list(a)redhat.com > https://www.redhat.com/mailman/listinfo/rdo-list > > To unsubscribe: rdo-list-unsubscribe(a)redhat.com >