[Rdo-list] snat and my WRT54G router

Hello, I'm still not able to get snat to work (connecting to the Internet) with my RDO all-in-one installation, and I'm wondering if my router is the issue. My router is a Linksys WRT54G, which does not support a "DHCP reservation" feature. I was able to set a fixed ip on it, because there is a range available from 192.168.1.2 through to 192.168.1.99, also 192.168.1.150 through 192.168.1.254. This is according to "toomanydonuts" posting here: http://community.linksys.com/t5/Wireless-Routers/WRT54G-Static-IP-Questio... I've been using the lower address range. Could this be the problem, or should I look elsewhere? In my setup I have two private subnets, and three VMs. I can ping between the VMs, but can't ping the Internet. A virtual router connects the subnets and external network. I set up my external subnet as 192.168.1.0/28. I use the 28 to limit the range for my router. The external range is the same as my actual physical addresses on my LAN. I should add, I'm not a network guy. I'm learning a lot of networking on the fly here. Thanks for any feedback!! ...John