Hi Jay,
thank you for you answer, in fact I was running instack-deploy-overcloud
after those commands, I didn't realize it deleted the plan, so a couple of
questions:
- Should I run something like "heat stack-create -f
tuskar_templates/plan.yaml -e tuskar_templates/environment.yaml" instead?
Will it work?
- Or should I wait for that to be ready in UI, if I understood correctly,
and test it from there?
Thanks,
Pedro Sousa
On Tue, May 26, 2015 at 8:07 PM, Jay Dobies <jason.dobies(a)redhat.com> wrote:
On 05/26/2015 02:19 PM, Pedro Sousa wrote:
> Hi Hugh,
>
> I've tried to change the plan:
>
> # tuskar plan-update -A Compute-1::NeutronEnableTunnelling=False
> c91b13a2-afd6-4eb2-9a78-46335190519d
> # tuskar plan-update -A Controller-1::NeutronEnableTunnelling=False
> c91b13a2-afd6-4eb2-9a78-46335190519d
> # export NEUTRON_NETWORK_TYPE=vlan
>
> But the stack failed, I also see that plan-update doesn't work:
>
It depends on what you did between the lines above and the line below.
If you're making the updates above and then running
instack-deploy-overcloud, it's not going to work. That script deletes the
plan and recreates it, losing your updates in the process.
That logic (role addition and plan create) is being moved out of
instack-deploy-overcloud to an installation-time step to enable this sort
of thing (not fully sure the state of that, but the UI needs the plan
create to be done during install as well).
[stack@instack ~]$ heat stack-show 4dd74e83-e90f-437f-b8b5-ac45d6ada9db
> | grep Tunnel
> | | "Controller-1::NeutronEnableTunnelling":
> "True",
>
> Regards
> Pedro Sousa
>
>
>
>
> On Tue, May 26, 2015 at 6:39 PM, Hugh Brock <hbrock(a)redhat.com
> <mailto:hbrock@redhat.com>> wrote:
>
> It should be... But we haven't really tested it yet, to my
> knowledge. It's an important configuration that we want to support.
>
> If you are able to sort it out and past your results here, that
> would be great!
>
> -Hugh
>
> Sent from my mobile, please pardon the top posting.
>
> *From:* Pedro Sousa <pgsousa(a)gmail.com <mailto:pgsousa@gmail.com>>
> *Sent:* May 26, 2015 7:28 PM
> *To:* Giulio Fidente
> *Cc:* Marios Andreou;rdo-list(a)redhat.com
> <mailto:Andreou%3Brdo-list@redhat.com>;Jason Dobies
> *Subject:* Re: [Rdo-list] RDO-Manager ovecloud change existing plan,
> how?
>
>
> Hi all,
>
> thanks to Giulio recommendations in #rdo I've managed to change some
> parameters:
>
> #heat stack-delete overcloud
> #export NEUTRON_TUNNEL_TYPES=vxlan
> #export NEUTRON_TUNNEL_TYPE=vxlan
> #export NEUTRON_NETWORK_TYPE=vxlan
> #instack-deploy-overcloud --tuskar
>
> This works for TUSKAR_PARAMETERS contained in the
> instack-deploy-overcloud script (please correct me if I'm wrong).
>
> My question is if it's possible to use VLAN for tenants, using a
> VLAN range and disable GRE/VXLAN tunneling.
>
> Thanks,
> Pedro Sousa
>
>
> On Mon, May 25, 2015 at 12:36 PM, Giulio Fidente
> <gfidente(a)redhat.com <mailto:gfidente@redhat.com>> wrote:
>
> On 05/25/2015 01:09 PM, Pedro Sousa wrote:
>
> Hi all,
>
> I've deployed rdo-manager in a virt env and everything is
> working fine
> except the vnc console which is alreday an open bug for that.
>
> Now I would like to change some parameters on my deployment,
> let's say I
> wan't to disable NeutronTunneling, I wan't to use VLAN for
> tenants and
> use 1500 MTU on dnsmasq.
>
> So I downloaded the plan:
>
> #tuskar plan-templates -O /tmp uuid
>
> changed plan.yaml, environment.yaml,
> provider-Controller-1.yaml,
> provider-Compute-1.yaml.
>
> than I ran the stack:
>
> # heat stack-create -f tmp/plan.yaml -e tmp/environment.yaml
> overcloud
>
> The overcloud is deployed fine but the values aren't
> changed. What I'm
> missing here?
>
>
> hi,
>
> if you launch stack-create manually the newly created overcloud
> is not reprovisioned with the initial keystone
> endpoints/users/roles ... to get an usable overcloud you should
> launch instack-deploy-overcloud again
>
> so you can change the defaults for the various params by
> patching the tuskar plan with 'tuskar plan-update' see [1]
>
> yet some of these are automatically parsed from ENV vars, like
> NEUTRON_TUNNEL_TYPES and NEUTRON_NETWORK_TYPE see [2]
>
> the NeutronDnsmasqOptions param instead is not parsed from any
> ENV var, so you're forced to use 'tuskar plan-update'
>
> I'm adding a couple of guys on CC who migh help but, let us know
> how it goes!
>
> 1.
>
>
https://github.com/rdo-management/instack-undercloud/blob/master/scripts/...
>
> 2.
>
>
https://github.com/rdo-management/instack-undercloud/blob/master/scripts/...
> --
> Giulio Fidente
> GPG KEY: 08D733BA
>
>
>
>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list(a)redhat.com
>
https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe(a)redhat.com
>
>
_______________________________________________
Rdo-list mailing list
Rdo-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/rdo-list
To unsubscribe: rdo-list-unsubscribe(a)redhat.com