7:13 a.m.
----- Original Message -----
Thank you for the reply.
I forgot to ask you, what are you using for your tenant networks?
VLANs, flat, GRE or VXLAN?
But I'd wanna know something more detail; I mean, how could the
network be
constructed?
Even if we use two different physical networks, the configuration seems not
easy to deploy.
which files should be modified or configured at allinone PackStack?
You'd only have to change the Packstack answer file. You should run
packstack --gen-answer-file=ans
'ans' will contain an answer file with all-in-one default values.
You should add all of the compute nodes to the compute node list
(Providing their management IP). If you're using VLANs then fill
in the bridge mappings keys (You'll put in the second NIC there),
or if you're using tunnels then specify the 2nd NIC as the tunnel
endpoint. The RDO docs have more specifics.
Anyway, I really appreciate your kind.
Best regards,
Byeong-Gi Kim
2014-04-02 19:37 GMT+09:00 Assaf Muller <amuller(a)redhat.com>:
> ----- Original Message -----
> > Hello.
> >
>
> Hi!
>
> > I installed Packstack for Openstack allinone installation, and I'm now
> trying
> > to add several compute nodes using different PCs.
> >
> > According to http://openstack.redhat.com/Adding_a_compute_node , the
> > additional Compute Nodes seems to connect with the PC what allinone has
> been
> > installed by PackStack via a LAN; Data Network and Management Network
> > described in the OpenStack Havana 3 node (Network Node, Compute Node, and
> > Controller Node) setup guide look like sharing the LAN cable.
> >
> > Conceptually, two networks need to use different port. Do the additional
> > Compute Nodes use a LAN as a trunk port to distinguish between the
> networks?
> > Or could you explain how does the multiple connection in PackStack work?
> >
>
> The easiest configuration (from Packstack's point of view) would be to use
> two
> different physical networks, with one NIC connected to each. So, for
> example,
> you could have eth0 of all nodes connected to the management network, and
> eth1
> connected to the VM / data network.
>
> Otherwise, you'd use two VLAN devices over your single NIC
> (You'd have to configure this, Packstack doesn't do this for you).
> Then place eth0.100, eth0.200 in your answer file where appropriate.
>
> If you get any failures, you could post your answer file and I'll take a
> look.
>
> > Thanks in advance!
> >
> > Byeong-Gi Kim
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
>