Re: [Rdo-list] The RDO Quickstart Guide and Private Network

------------------------------ *From:* John Alway <jalway(a)gmail.com&gt; *Sent:* Friday, February 19, 2016 12:00 AM *To:* Boris Derzhavets *Cc:* rdo-list(a)redhat.com *Subject:* Re: [Rdo-list] The RDO Quickstart Guide and Private Network Thanks, Boris. I was able to get the instance running, but in Step 7, when I used the command # ssh -i cloud2.pem fedora(a)172.24.4.227 It returned "ssh: connect to host 172.24.4.227 port 22: Connection timed out" [BD] When you ran packstack :- 1. How looked puppets XX.XX.XX.XX_keystone.pp ( for instance ) ? 2. What is CIDR of LAN your box is located ? In the Dashboard is says that the instance is "active" and power state is "running". On Wed, Feb 17, 2016 at 2:04 PM, Boris Derzhavets <bderzhavets(a)hotmail.com > wrote: > > > > ------------------------------ > *From:* John Alway <jalway(a)gmail.com&gt; > *Sent:* Wednesday, February 17, 2016 1:42 PM > *To:* Boris Derzhavets > *Cc:* rdo-list(a)redhat.com > *Subject:* Re: [Rdo-list] The RDO Quickstart Guide and Private Network > > Thanks a lot for the help, Boris. I'll try this out. However, a lot > of these concepts I'm not sure of, so I'll have to study them. > > Is this RDO project for beginners, or do they expect you to have some > previous knowledge, because I'd like to learn some of these prior concepts, > so that I can move through this process more smoothly? > > [BD] I believe packstack will be supported. But, I already got > experience with manual set up > HA 3 Node (Active/Active) Controller ( Haproxy/Keepalived) . RH is > targeting RDO Manager > or TripleO with deploying to overcloud (Active/Passive) HA Controllers > (Pacemaker/Corosync). > At the point when RDO Manager (Triple0) will be used by everybody, > packstack won't be > needed at all. > > Many thanks! > > ...John > > On Tue, Feb 16, 2016 at 2:41 PM, Boris Derzhavets < > bderzhavets(a)hotmail.com&gt; wrote: > >> >> >> >> ------------------------------ >> *From:* rdo-list-bounces(a)redhat.com <rdo-list-bounces(a)redhat.com&gt; on >> behalf of John Alway <jalway(a)gmail.com&gt; >> *Sent:* Tuesday, February 16, 2016 3:16 PM >> *To:* rdo-list(a)redhat.com >> *Subject:* [Rdo-list] The RDO Quickstart Guide and Private Network >> >> Hello, >> >> I overcame the problem of getting a valid key-pair value. I'm not sure >> exactly how it was fixed, but I found the rabbitmq server was down. This >> was a result of a host name conflict. The /etc/hostname and /etc/hosts >> files must both have the same hostname. I fixed that, and key-value pair >> now works. I'm not sure if that was the reason, because of some funny >> behavior prior, and it didn't initially complain about this. Suffice to >> say, I'm glad it's working! >> >> Anyway, I'm doing the first tutorial, and I've run into an issue. >> >> Here is the tutorial: >> https://www.rdoproject.org/install/running-an-instance/ >> <https://www.rdoproject.org/install/running-an-instance/> >> Running an instance — RDO >> <https://www.rdoproject.org/install/running-an-instance/> >> www.rdoproject.org >> Running an Instance Step 1: Visit the Dashboard. Log in to the Openstack >> dashboard at http://CONTROL_NODE/dashboard - the username is "demo". >> The password can be ... >> >> >> I ran through the steps, and when I got to Step 5, it wanted me to >> select a "private network," however I only have a public network to select. >> >> [BD] >> >> Create demo_network under particular user belongs to tenant "demo" ( >> whose login has been used ) >> demo_network should have interface attached to router, created by same >> user ( ACTIVE State ) >> and having external gateway to public. >> Then in dropdown menu will appear just created demo_network. If you >> select it ( with correct DNS server >> been defined ) then VM supposed to be launched ( say CirrOS 3.4) will >> get Internet outbound connectivity. >> As soon as you assign floating IP from public pool VM will get inbound >> connectivity. >> >> I'm running this thing to get myself started, so that I can learn >> Openstack. So, I'm not sure why there is no private network, nor how I can >> create one. >> >> [BD] >> Network may be created via dashboard GUI right here . Maybe be created >> via Neutron CLI with corresponding credentials been sourced previously (# >> . keystonerc_user ) >> >> Does anyone have any ideas on this? >> >> Thanks! >> ...John >> > >