[Rdo-list] RDO meetup at DevConf.cz?
by Rich Bowen
We have the opportunity to have a RDO meetup at DevConf.cz for those of
us who will be there. The room is available 9H00 through 18H00 on
Saturday, and we can pick any time that we like. (Although it'll fill up
quickly, I presume.)
I see OpenStack content at:
14:00
16:30
17:20
https://devconfcz2016.sched.org/?s=openstack
We could either do this in the morning, say, 11:00, or we could do it at
15:00 right after Jakub's rdopkg talk.
Thoughts?
--
Rich Bowen - rbowen(a)redhat.com
OpenStack Community Liaison
http://rdoproject.org/
8 years, 10 months
[Rdo-list] Unanswered ask.openstack.org "RDO" questions (Jan 11, 2016)
by Rich Bowen
In an attempt to raise awareness of the questions that folks are asking
about RDO on ask.openstack.org, as well as to get those questions
answered, I'm thinking of doing a weekly automated mailing of the
unanswered questions containing (or tagged with) "RDO".
These are sorted by age, so some of the ones at the end are very old and
probably ready to be closed.
Thanks for any time you can devote to answering one or two of these.
OpenStack-Docker driver failed
https://ask.openstack.org/en/question/87243/openstack-docker-driver-failed/
Tags: docker, openstack, liberty
Upgrading from RDO commercial RHEL OSP
https://ask.openstack.org/en/question/87200/upgrading-from-rdo-commercial...
Tags: upgrading, rdo, rhel, osp
Abnormal resource consumption in RDO environment.
https://ask.openstack.org/en/question/87189/abnormal-resource-consumption...
Tags: rdo, liberty, kilo, fedora, centos
Clarification on docs for self service connectivity
https://ask.openstack.org/en/question/87183/clarification-on-docs-for-sel...
Tags: liberty, neutron, connectivity, router
RDO installation : Huge resources consumption (RAM)
https://ask.openstack.org/en/question/87158/rdo-installation-huge-resourc...
Tags: ram, rdo, liberty, juno, kilo
Can't create volume with cinder
https://ask.openstack.org/en/question/86670/cant-create-volume-with-cinder/
Tags: cinder, glusterfs, nfs
Packstack install MongoDB Error
https://ask.openstack.org/en/question/86293/packstack-install-mongodb-error/
Tags: mongodb, mongodb.pp, packstack, rdo, error
Sahara HDP Cluster: error_message=Cluster is missing a service: YARN
https://ask.openstack.org/en/question/85801/sahara-hdp-cluster-error_mess...
Tags: sahara, hdp, hadoop, error, yarn
error installing rdo kilo with proxy
https://ask.openstack.org/en/question/85703/error-installing-rdo-kilo-wit...
Tags: rdo, packstack, centos, proxy
Why is /usr/bin/openstack domain list ... hanging?
https://ask.openstack.org/en/question/85593/why-is-usrbinopenstack-domain...
Tags: puppet, keystone, kilo
Internal Server Error when access horizon kilo
https://ask.openstack.org/en/question/85331/internal-server-error-when-ac...
Tags: rdo, horizon
How to configure the RDO Dashboard for SSL
https://ask.openstack.org/en/question/85284/how-to-configure-the-rdo-dash...
Tags: mod_ssl, rdo
[ RDO ] Could not find declared class ::remote::db
https://ask.openstack.org/en/question/84820/rdo-could-not-find-declared-c...
Tags: rdo
Sahara SSHException: Error reading SSH protocol banner
https://ask.openstack.org/en/question/84710/sahara-sshexception-error-rea...
Tags: sahara, icehouse, ssh, vanila
Error Sahara create cluster: 'Error attach volume to instance
https://ask.openstack.org/en/question/84651/error-sahara-create-cluster-e...
Tags: sahara, attach-volume, vanila, icehouse
Creating Sahara cluster: Error attach volume to instance
https://ask.openstack.org/en/question/84650/creating-sahara-cluster-error...
Tags: sahara, attach-volume, hadoop, icehouse, vanilla
Routing between two tenants
https://ask.openstack.org/en/question/84645/routing-between-two-tenants/
Tags: kilo, fuel, rdo, routing
Freeing IP from FLAT network setup
https://ask.openstack.org/en/question/84063/freeing-ip-from-flat-network-...
Tags: juno, existing-network, rdo, neutron, flat
How to deploy Virtual network function (VNF) in Opnstack integrated
Opendaylight
https://ask.openstack.org/en/question/84061/how-to-deploy-virtual-network...
Tags: vnf, kilo, opendaylight, nfv
cann't install python-keystone-auth-token [Close Duplicate]
https://ask.openstack.org/en/question/83942/cannt-install-python-keystone...
Tags: python-keystone, openstack-swift
RDO kilo installation metadata widget doesn't work
https://ask.openstack.org/en/question/83870/rdo-kilo-installation-metadat...
Tags: kilo, flavor, metadata
Not able to ssh into RDO Kilo instance
https://ask.openstack.org/en/question/83707/not-able-to-ssh-into-rdo-kilo...
Tags: rdo, instance-ssh
No able to create an instance in odl integrated RDO Kilo openstack
https://ask.openstack.org/en/question/83700/no-able-to-create-an-instance...
Tags: kilo, rdo, opendaylight, kilo-neutron, integration
redhat RDO enable access to swift via S3
https://ask.openstack.org/en/question/83607/redhat-rdo-enable-access-to-s...
Tags: swift, s3
Doesn't Swift use storage the same way Cinder does?
https://ask.openstack.org/en/question/83532/doesnt-swift-use-storage-the-...
Tags: swift, cinder, storage, network, topology
Heat stack create failed
https://ask.openstack.org/en/question/82846/heat-stack-create-failed/
Tags: rdo, tripleo, heat, overcloud
openstack baremetal introspection internal server error
https://ask.openstack.org/en/question/82790/openstack-baremetal-introspec...
Tags: rdo, ironic-inspector, tripleo
glance\nova command line SSL failure
https://ask.openstack.org/en/question/82692/glancenova-command-line-ssl-f...
Tags: glance, kilo-openstack, ssl
Cannot create/update flavor metadata from horizon
https://ask.openstack.org/en/question/82477/cannot-createupdate-flavor-me...
Tags: rdo, kilo, flavor, metadata
Installing openstack using packstack (rdo) failed
https://ask.openstack.org/en/question/82473/installing-openstack-using-pa...
Tags: rdo, packstack, installation-error, keystone
--
Rich Bowen - rbowen(a)redhat.com
OpenStack Community Liaison
http://rdoproject.org/
8 years, 10 months
[Rdo-list] openstack-puppet-modules branches
by Alan Pevec
Hi all (but specifically Puppet folks in CC :)
we need to rebase openstack-puppet-modules[1] (short OPM) to Mitaka
while leaving Liberty on the stable branch asap.
OPM is a special case in Delorean, it is built from master-patches,
not master like other projects, because there are always some patches
required by packstack or rdom which are not or cannot be merged in
upstream openstack-puppet.
For Delorean Liberty rdoinfo was not forked, instead Delorean was
modified to try distro and source branch specified in projects.ini[2]
then fallback to default rpm-master and master respectively. This
works nicely for most of the projects but fallback is not active when
branch is specified explicitly in rdoinfo, like it is for OPM
special-case[3].
Alternative solutions are:
1. fork rdoinfo for Liberty
2. modify Delorean to support this special case
3. modify OPM repo to match working schema for other projects
AD 1. I'm -2, fork for just one special case is unjustified and
keeping everything else in sync would be wasteful.
AD 2. After quick poking at it, clear -2 from me.
AD 3. Rename branches in OPM repo like this:
current master -> upstream-master (verbatim copies of upstream
modules' master branches)
master-patches -> master (non-upstream patches rebased on top of
upstream-master)
current stable/liberty -> upstream-liberty (verbatim copies of
upstream modules' stable/liberty branches)
liberty-patches -> stable/liberty (non-upstream patches rebased on
top of upstream-liberty)
This would work immediately with current Delorean tooling, only
required change is to remove source-branch in rdoinfo for OPM,
and I hope OPM tooling could be modified easily to handle this change?
Cheers,
Alan
[1] https://github.com/redhat-openstack/openstack-puppet-modules
[2] https://github.com/redhat-openstack/delorean-instance/blob/2c182dd57c590c...
[3] https://github.com/redhat-openstack/rdoinfo/blob/60e523481def987d6592f0dc...
8 years, 10 months
[Rdo-list] RDO/OpenStack meetups this week.
by Rich Bowen
The following are the meetups I'm aware of in the coming week where
OpenStack and/or RDO enthusiasts are likely to be present. If you know
of others, please let me know, and/or add them to
http://rdoproject.org/events, which also lists events further in the
future than just this week.
If there's a meetup in your area, please consider attending. If you
attend, please consider taking a few photos, and possibly even writing
up a brief summary of what was covered.
--Rich
* Tuesday January 12 in Los Angeles, CA, US: Webinar - Red Hat and
Cisco: Making OpenStack work for the Enterprise -
http://www.meetup.com/Southern-California-Red-Hat-User-Group-RHUG/events/...
* Tuesday January 12 in Boston, MA, US: OpenStack and data bases! -
http://www.meetup.com/Openstack-Boston/events/227826780/
* Wednesday January 13 in Amersfoort, NL: OpenStack Jobs -
http://www.meetup.com/Openstack-Netherlands/events/227409852/
* Thursday January 14 in Fort Lauderdale, FL, US: Monthly SFOUG Meeting
-
http://www.meetup.com/South-Florida-OpenStack-Users-Group/events/227415610/
* Saturday January 16 in Shenzhen, CN: 2016深圳第一场技术大趴:The
Dragons of OpenStack -
http://www.meetup.com/Shenzhen-openstack-usergroup/events/228001930/
--
Rich Bowen - rbowen(a)redhat.com
OpenStack Community Liaison
http://rdoproject.org/
8 years, 10 months
[Rdo-list] HA setup in Kilo
by Netravali, Ganesh
Hi Experts.
I am trying bring up 2 instance on Kilo with Active-Backup configuration. I need to float the external net IP between 2 instances. IP should get assigned to instance which acts as active. Can you please suggest the best method?
Thanks
Ganesh
8 years, 10 months
[Rdo-list] Confusion with Floating IPs in RDO Liberty Packstack 3-node setup
by Jamie Duncan
I have a 3-node setup using packstack. It went smoothly with no issues.
I created a public subnet with the following command.
neutron subnet-create --name public_subnet --enable_dhcp=False
--allocation-pool=start=10.10.179.230,end=10.10.179.250
--gateway=10.10.183.254 external_network 10.10.176.0/21
So I should have about 18 usable IP addresses. Perfect.
But I only have 2.
[root@dell-r430-13 ~(keystone_atomic)]# neutron floatingip-list
+--------------------------------------+------------------+---------------------+---------+
| id | fixed_ip_address |
floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+---------+
| 1c94a153-20d4-43cd-b8c2-4d259975e043 | | 10.10.179.235
| |
| ad4e0089-2d4d-46dd-a0f2-21b6c854398d | | 10.10.179.232
| |
+--------------------------------------+------------------+---------------------+---------+
I had to create the floating IPs manually with a for loop.
It wasn't hard. I'm just wondering what I did wrong, or if that's something
I've just somehow missed every other time.
8 years, 10 months