[rdo-list] RDO Newton GA Test Day - October 13, 14

[Dmitry Tantsur]

Sure, what's the best place to put it?

On 10/09/2016 12:03 AM, Rich Bowen wrote:
> It would be really helpful to have this somewhere less ephemeral than email,
> linked in the test day page.
>
>
> On Oct 7, 2016 06:52, "Dmitry Tantsur" <dtantsur at redhat.com
> <mailto:dtantsur at redhat.com>> wrote:
>
>     On 10/07/2016 08:38 AM, Boris Derzhavets wrote:
>
>
>
>
>         --------------------------------------------------------------------------------
>         *From:* rdo-list-bounces at redhat.com <mailto:rdo-list-bounces at redhat.com>
>         <rdo-list-bounces at redhat.com <mailto:rdo-list-bounces at redhat.com>> on
>         behalf of
>         Dmitry Tantsur <dtantsur at redhat.com <mailto:dtantsur at redhat.com>>
>         *Sent:* Thursday, October 6, 2016 2:03 PM
>         *To:* rdo-list at redhat.com <mailto:rdo-list at redhat.com>
>         *Subject:* Re: [rdo-list] RDO Newton GA Test Day - October 13, 14
>
>         On 10/05/2016 04:05 PM, Rich Bowen wrote:
>
>             Please join us for the final test day of the Newton cycle.
>
>             Full details of the test day are at
>             https://www.rdoproject.org/testday/newton/final/
>             <https://www.rdoproject.org/testday/newton/final/>
>
>             We will be testing on October 13th and 14th. Come to #rdo on the
>             Freenode IRC network for help and discussion.
>
>             Based on discussion on the list, I've moved the test scenarios document
>             entirely to an etherpad, to make it easier to add test scenarios, as
>             well as easier for people to add their test day notes.
>
>             Please have a look at the test scenario etherpad prior to test day, and
>             ensure that desired scenarios are listed, and that instructions are
>             there for testers to follow -
>             https://etherpad.openstack.org/p/rdo-newton-ga-testday-testplan
>             <https://etherpad.openstack.org/p/rdo-newton-ga-testday-testplan>
>
>
>
>         May I shamelessly ask folks to give Ironic support in TripleO overcloud
>         a try?
>         This is a new thing in Newton, and I know that a lot of people were excited
>         about it. Here is the rough walk-through for testing it:
>         http://tripleo.org/advanced_deployment/baremetal_overcloud.html
>         <http://tripleo.org/advanced_deployment/baremetal_overcloud.html>
>
>         Could you provide a sample of ironic-config.yaml, which is ready to go ,
>         then it would not be a problem to make a test via instack-virt-setup install
>         based on "centos7-newton/current-passed-ci" trunk.
>
>         Thanks.
>         Boris
>
>         Thanks!
>
>
>     This is what I used the last time:
>
>     parameter_defaults:
>         IronicEnabledDrivers:
>             - pxe_ssh
>             - pxe_ipmitool
>         IronicCleaningDiskErase: 'metadata'
>         ControllerExtraConfig:
>             ironic::drivers::ssh::libvirt_uri: 'qemu:///session'
>         NovaSchedulerDefaultFilters:
>             - RetryFilter
>             - AggregateInstanceExtraSpecsFilter
>             - AvailabilityZoneFilter
>             - RamFilter
>             - DiskFilter
>             - ComputeFilter
>             - ComputeCapabilitiesFilter
>             - ImagePropertiesFilter
>         ControllerCount: 3
>         ComputeCount: 1
>         OvercloudControlFlavor: control
>         OvercloudComputeFlavor: compute
>         NtpServer: 'pool.ntp.org <http://pool.ntp.org>'
>
>
>     This does not include ironic::conductor::cleaning_network_uuid, which has to
>     be set later. As you see, it assumes HA configuration, and using hybrid
>     BM-VM. It can be used for both virtual and non-virtual environments. Also
>     note that setting ironic::drivers::ssh::libvirt_uri is because I used
>     tripleo-quickstart. Remove it for instack-virt-setup.
>
>     Overall, I would recommend you start with an easier configuration:
>
>     parameter_defaults:
>         IronicEnabledDrivers:
>             - pxe_ssh
>             - pxe_ipmitool
>         IronicCleaningDiskErase: 'metadata'
>         ControllerCount: 1
>         ComputeCount: 0
>         OvercloudControlFlavor: control
>         NtpServer: 'pool.ntp.org <http://pool.ntp.org>'
>
>     _______________________________________________
>     rdo-list mailing list
>     rdo-list at redhat.com <mailto:rdo-list at redhat.com>
>     https://www.redhat.com/mailman/listinfo/rdo-list
>     <https://www.redhat.com/mailman/listinfo/rdo-list>
>
>     To unsubscribe: rdo-list-unsubscribe at redhat.com
>     <mailto:rdo-list-unsubscribe at redhat.com>
>