[rdo-list] RDO Newton GA Test Day - October 13, 14

[Rich Bowen]

It would be really helpful to have this somewhere less ephemeral than
email, linked in the test day page.

On Oct 7, 2016 06:52, "Dmitry Tantsur" <dtantsur at redhat.com> wrote:

> On 10/07/2016 08:38 AM, Boris Derzhavets wrote:
>
>>
>>
>>
>> ------------------------------------------------------------
>> --------------------
>> *From:* rdo-list-bounces at redhat.com <rdo-list-bounces at redhat.com> on
>> behalf of
>> Dmitry Tantsur <dtantsur at redhat.com>
>> *Sent:* Thursday, October 6, 2016 2:03 PM
>> *To:* rdo-list at redhat.com
>> *Subject:* Re: [rdo-list] RDO Newton GA Test Day - October 13, 14
>>
>> On 10/05/2016 04:05 PM, Rich Bowen wrote:
>>
>>> Please join us for the final test day of the Newton cycle.
>>>
>>> Full details of the test day are at
>>> https://www.rdoproject.org/testday/newton/final/
>>>
>>> We will be testing on October 13th and 14th. Come to #rdo on the
>>> Freenode IRC network for help and discussion.
>>>
>>> Based on discussion on the list, I've moved the test scenarios document
>>> entirely to an etherpad, to make it easier to add test scenarios, as
>>> well as easier for people to add their test day notes.
>>>
>>> Please have a look at the test scenario etherpad prior to test day, and
>>> ensure that desired scenarios are listed, and that instructions are
>>> there for testers to follow -
>>> https://etherpad.openstack.org/p/rdo-newton-ga-testday-testplan
>>>
>>>
>>>
>> May I shamelessly ask folks to give Ironic support in TripleO overcloud a
>> try?
>> This is a new thing in Newton, and I know that a lot of people were
>> excited
>> about it. Here is the rough walk-through for testing it:
>> http://tripleo.org/advanced_deployment/baremetal_overcloud.html
>>
>> Could you provide a sample of ironic-config.yaml, which is ready to go ,
>> then it would not be a problem to make a test via instack-virt-setup
>> install
>> based on "centos7-newton/current-passed-ci" trunk.
>>
>> Thanks.
>> Boris
>>
>> Thanks!
>>
>>
> This is what I used the last time:
>
> parameter_defaults:
>     IronicEnabledDrivers:
>         - pxe_ssh
>         - pxe_ipmitool
>     IronicCleaningDiskErase: 'metadata'
>     ControllerExtraConfig:
>         ironic::drivers::ssh::libvirt_uri: 'qemu:///session'
>     NovaSchedulerDefaultFilters:
>         - RetryFilter
>         - AggregateInstanceExtraSpecsFilter
>         - AvailabilityZoneFilter
>         - RamFilter
>         - DiskFilter
>         - ComputeFilter
>         - ComputeCapabilitiesFilter
>         - ImagePropertiesFilter
>     ControllerCount: 3
>     ComputeCount: 1
>     OvercloudControlFlavor: control
>     OvercloudComputeFlavor: compute
>     NtpServer: 'pool.ntp.org'
>
>
> This does not include ironic::conductor::cleaning_network_uuid, which has
> to be set later. As you see, it assumes HA configuration, and using hybrid
> BM-VM. It can be used for both virtual and non-virtual environments. Also
> note that setting ironic::drivers::ssh::libvirt_uri is because I used
> tripleo-quickstart. Remove it for instack-virt-setup.
>
> Overall, I would recommend you start with an easier configuration:
>
> parameter_defaults:
>     IronicEnabledDrivers:
>         - pxe_ssh
>         - pxe_ipmitool
>     IronicCleaningDiskErase: 'metadata'
>     ControllerCount: 1
>     ComputeCount: 0
>     OvercloudControlFlavor: control
>     NtpServer: 'pool.ntp.org'
>
> _______________________________________________
> rdo-list mailing list
> rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20161008/600d9de9/attachment.html>