[Rdo-list] TripleO quickstart problem by deploying the overcloud
Arash Kaffamanesh
ak at cloudssky.com
Mon Mar 28 20:12:40 UTC 2016
Finally I got the TripleO installation running.
After the virtual environment setup via:
bash quickstart.sh $virthost
If I run "*openstack undercloud install" *directly, the undercloud
installation completes, but the following steps leads to an incomplete
setup (I could reproduce this several times on our own hardware and on
Rackspace Ironic powered :-) OnMetal servers):
[stack at undercloud ~]$ . stackrc
[stack at undercloud ~]$ openstack overcloud image upload
[stack at undercloud ~]$ openstack baremetal import --json instackenv.json
[stack at undercloud ~]$ ironic node-list
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| UUID | Name | Instance UUID | Power
State | Provisioning State | Maintenance |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| 57db4c06-7bb9-40c8-8530-6e9d5efb83c5 | control-0 | None | *None*
| available | False |
| 21af64b4-d3c3-4b63-ba97-aa14173a21be | compute-0 | None | *None*
| available | False |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
and as I mentioned earlier the "openstack baremetal configure boot" times
out:
[stack at undercloud ~]$ openstack baremetal configure boot
Node 57db4c06-7bb9-40c8-8530-6e9d5efb83c5 power state is in transition.
Waiting up to 120 seconds for it to complete.
*Timed out* waiting for node 57db4c06-7bb9-40c8-8530-6e9d5efb83c5 power
state.
And I guess because the Power State is set to None!
But if I run the following scripts by hand the installation completes
successfully (in most cases):
undercloud-install.sh
undercloud-post-install.sh
overcloud-deploy.sh
overcloud-deploy-post.sh
overcloud-validate.sh
Only once by my last tests it failed after running:
[stack at undercloud ~]$ bash overcloud-deploy.sh
2016-03-28 15:21:56 [Compute]: CREATE_COMPLETE state changed
Stack overcloud *CREATE_FAILED*
*Deployment failed: Heat Stack create failed.*
And I had to delete the stack and re-deploy it again, which worked :-)
[stack at undercloud ~]$ heat stack-delete overcloud
[stack at undercloud ~]$ bash overcloud-deploy.sh
[stack at undercloud ~]$ heat stack-list
+--------------------------------------+------------+-----------------+---------------------+--------------+
| id | stack_name | stack_status |
creation_time | updated_time |
+--------------------------------------+------------+-----------------+---------------------+--------------+
| 8e588312-d839-4089-b123-3fa9b5e76c82 | overcloud | *CREATE_COMPLETE* |
2016-03-28T16:44:59 | None |
+--------------------------------------+------------+-----------------+---------------------+--------------+
Here are the steps which might lead to a successful TripleO quickstart
setup with a seed and baremetal host (virthost-01).
(the seed / ansible host is a CentOS 7 machine (could be a VM running in
VirtualBox on localhost on Mac or Windows for instance), the baremetal host
needs 32 GB RAM, 2 nics and 150 GB Disk).
On the seed / ansible host run:
[root at seed ~]# yum -y update
[root at seed ~]# yum install git -y
[root at seed ~]# vim /etc/hosts
<ip-virthost-01> virthost-01
[root at seed ~] git clone
https://github.com/redhat-openstack/tripleo-quickstart/
[root at seed ~] cd tripleo-quickstart/
[root at seed ~] sudo bash quickstart.sh --install-deps
[root at seed ~] reboot (not needed, but doesn't hurt :-))
[root at seed ~] ssh-keygen -t rsa
[root at seed ~] ssh-copy-id -i ~/.ssh/id_rsa.pub virthost-01
[root at seed ~] ssh <ip-virthost-01>
exit
Deploy your virtual environment by running:
[root at seed ~] *bash quickstart.sh virthost-01 *
##################################
Virtual Environment Setup Complete
##################################
Access the undercloud by:
*ssh -F /root/.quickstart/ssh.config.ansible undercloud*
*USE THIS: There are scripts in the home directory to continue the deploy:*
undercloud-install.sh will run the undercloud install
undercloud-post-install.sh will perform all pre-deploy steps
overcloud-deploy.sh will deploy the overcloud
overcloud-deploy-post.sh will do any post-deploy configuration
overcloud-validate.sh will run post-deploy validation
Alternatively, you can ignore these scripts and follow the upstream docs:
First: *(DON’t use this!!!!!!!!!!!!!!!!!!!!!!!!!!!!!)*
*openstack undercloud install*
source stackrc
Verify your Stack:
[stack at undercloud ~]$ heat stack-list
+--------------------------------------+------------+-----------------+---------------------+--------------+
| id | stack_name | stack_status |
creation_time | updated_time |
+--------------------------------------+------------+-----------------+---------------------+--------------+
| 8e588312-d839-4089-b123-3fa9b5e76c82 | overcloud | *CREATE_COMPLETE* |
2016-03-28T16:44:59 | None |
+--------------------------------------+------------+-----------------+---------------------+--------------+
By the way, I'd love to see and help to have an complete installation guide
for TripleO powered by RDO on the RDO site (the instack virt setup without
quickstart on http://docs.openstack.org/ doesn't work and this might be
changed through the RDO community power :-)).
Thx,
-Arash
On Sat, Mar 26, 2016 at 3:52 AM, Adam Young <ayoung at redhat.com> wrote:
> On 03/25/2016 02:52 PM, Arash Kaffamanesh wrote:
>
> Hi,
>
> I'm trying to deploy OpenStack via TripleO quickstart in AIO / virt mode
> and I'm getting by the last step deploying the overcloud the following
> "Heat Stack create failed" message (There are not enough hosts available,
> due to Configuration has 4 errors, fix them before proceeding ????).
>
> After running openstack overcloud deploy I'm getting *Configuration has 4
> errors, fix them before proceeding*: (and I guess the problem lies
> somehow here with the "incorrectly configured driver_info"):
>
> [stack at undercloud ~]$ openstack overcloud deploy --templates
>
> Node uuid=a62116c4-1daf-45e9-aa2d-ef8a4effdc20 has an incorrectly
> configured driver_info/deploy_ramdisk. Expected
> "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
>
> Node uuid=a62116c4-1daf-45e9-aa2d-ef8a4effdc20 has an incorrectly
> configured driver_info/deploy_kernel. Expected
> "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
>
> Node uuid=cfc60017-36e8-4808-842d-8c65ffb5e4b1 has an incorrectly
> configured driver_info/deploy_ramdisk. Expected
> "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
>
> Node uuid=cfc60017-36e8-4808-842d-8c65ffb5e4b1 has an incorrectly
> configured driver_info/deploy_kernel. Expected
> "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
>
> *Configuration has 4 errors, fix them before proceeding.* Ignoring these
> errors is likely to lead to a failed deploy.
>
> Deploying templates in the directory
> /usr/share/openstack-tripleo-heat-templates
>
> 2016-03-25 17:45:13 [overcloud]: CREATE_IN_PROGRESS Stack CREATE started
>
> 2016-03-25 17:45:13 [MysqlRootPassword]: CREATE_IN_PROGRESS state changed
>
> 2016-03-25 17:45:14 [Networks]: CREATE_IN_PROGRESS state changed
> .......
>
> 2016-03-25 17:47:15 [overcloud]: CREATE_FAILED Resource CREATE failed:
> resources.Compute: ResourceInError: resources[0].resources.NovaCompute:
> Went to status ERROR due to "Message: No valid host was found. *There are
> not enough hosts available*., Code: 500"
>
> *Stack overcloud CREATE_FAILED*
>
> *Heat Stack create failed.*
>
> [stack at undercloud ~]$ heat stack-list
>
>
> +--------------------------------------+------------+---------------+---------------------+--------------+
>
> | id | stack_name | stack_status |
> creation_time | updated_time |
>
>
> +--------------------------------------+------------+---------------+---------------------+--------------+
>
> | 27fd6b76-7413-4e9b-9b5e-c7afb941ee0e | overcloud | *CREATE_FAILED* |
> 2016-03-25T17:45:12 | None |
>
>
> +--------------------------------------+------------+---------------+---------------------+--------------+
>
>
> By the way I tried to get the stable liberty and the latest mitaka working
> with TripleO, no either worked.
> And tried also Lars's tutorial here:
>
> http://blog.oddbit.com/2016/02/19/deploy-an-ha-openstack-development-envir/
>
> had not so much luck, but could learn a lot and would prefer to learn more
> by running the ansible playbooks by hand as described by Lars.
>
> Any help / advice is much appreciated.
>
> Thx,
> -Arash
>
>
> Super valuable guide.
>
>
> http://hardysteven.blogspot.com/2015/04/debugging-tripleo-heat-templates.html
>
> I had similar problems. I had to increase the size of the controller
> nodes.
>
> Since running tripleo Quickstart, I've not had any problems, but that is
> not true baremetal.
>
>
>
>
>
> _______________________________________________
> Rdo-list mailing listRdo-list at redhat.comhttps://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20160328/dc2fac52/attachment.html>
More information about the dev
mailing list