[Rdo-list] TripleO quickstart problem by deploying the overcloud
Arash Kaffamanesh
ak at cloudssky.com
Fri Mar 25 21:23:17 UTC 2016
Deleted the ironic nodes and ran openstack baremetal configure boot:
stack at undercloud ~]$ ironic node-list
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| UUID | Name | Instance UUID | Power
State | Provisioning State | Maintenance |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| 496caaf1-aef6-43ab-b863-f0330ea94217 | control-0 | None | None
| available | False |
| 27d032c9-1b18-4147-a299-1ac7b733bdcd | compute-0 | None | None
| available | False |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
but I'm getting a timeout after 120 seconds:
[stack at undercloud ~]$ openstack baremetal configure boot
Node 496caaf1-aef6-43ab-b863-f0330ea94217 power state is in
transition. *Waiting
up to 120 seconds for it to complete.*
Timed out waiting for node 496caaf1-aef6-43ab-b863-f0330ea94217 power state.
and after running ironic node-list again, the nodes go to Maintenance set
to True:
[stack at undercloud ~]$ ironic node-list
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| UUID | Name | Instance UUID | Power
State | Provisioning State | Maintenance |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
| 496caaf1-aef6-43ab-b863-f0330ea94217 | control-0 | None | None
| available | True |
| 27d032c9-1b18-4147-a299-1ac7b733bdcd | compute-0 | None | None
| available | True |
+--------------------------------------+-----------+---------------+-------------+--------------------+-------------+
Thx!
Mit freundlichen Grüßen,
Arash Kaffamanesh
Like <https://www.facebook.com/cloudssky> | Follow
<https://twitter.com/CLOUDSSKYONE>
*Arash Kaffamanesh (GF)*
*Clouds Sky GmbH**Im Mediapark 4C*
*50670 Köln*
Tel.: +49 221 204 726 76
Mobile: +49 177 880 77 34
www.cloudssky.com
On Fri, Mar 25, 2016 at 9:42 PM, Dan Sneddon <dsneddon at redhat.com> wrote:
> On 03/25/2016 01:15 PM, Arash Kaffamanesh wrote:
> > Dan, thx!
> >
> > After running:
> >
> > [stack at undercloud ~]$ openstack baremetal configure boot
> >
> > nothing is get shown (and I'm somehow sure and guess that this step
> > does not complete successfully, but my current knowledge ans a
> > ooo-newbie doesn't allow to investigate this further for now :-)).
> >
> > And the introspection finishes too fast for my taste :-)
> >
> > [stack at undercloud ~]$ openstack baremetal introspection bulk start
> >
> > Setting nodes for introspection to manageable...
> >
> > Waiting for introspection to finish...
> >
> > Setting manageable nodes to available...
> >
> > Introspection completed.
> >
> >
> > And yes, I've a baremetal machine with 32 GB RAM and 160 GB SSD disk.
> >
> > And if I run ironic node-show I get the last error which states: node
> > state None does not match expected state.
> >
> >
> > [stack at undercloud ~]$ ironic node-show
> a62116c4-1daf-45e9-aa2d-ef8a4effdc20
> >
> >
> +------------------------+--------------------------------------------------------------------------+
> >
> > | Property | Value
> > |
> >
> >
> +------------------------+--------------------------------------------------------------------------+
> >
> > | target_power_state | None
> > |
> >
> > | extra | {}
> > |
> >
> > | last_error | During sync_power_state, max retries
> > exceeded for node a62116c4-1daf- |
> >
> > | | 45e9-aa2d-ef8a4effdc20, node state None does
> > not match expected state |
> >
> > | | 'None'. Updating DB state to 'None'
> > Switching node to maintenance mode. |
> >
> >
> > I also deleted the undercloud node and re-ran a fresh install of the
> > undercloud and I'm going to do a fresh baremetal install of the
> > virthost now and document all steps one by for the quickstart.
> >
> > One question: does the upstream documentation for TripleO work for
> > anyone (without quickstart?). For the virt-install I got the instack
> > running, but that was a nightmare :-)
> >
> > Thx,
> > -Arash
> >
> >
> >
> > Mit freundlichen Grüßen,
> > Arash Kaffamanesh
> >
> > Like <https://www.facebook.com/cloudssky> | Follow
> > <https://twitter.com/CLOUDSSKYONE>
> >
> > *Arash Kaffamanesh (GF)**
> >
> > Clouds Sky GmbH
> > **Im Mediapark 4C*
> >
> > *50670 Köln*
> >
> > Tel.: +49 221 204 726 76
> > Mobile: +49 177 880 77 34
> > www.cloudssky.com <http://www.cloudssky.com/>
> >
> > **
> >
> >
> > On Fri, Mar 25, 2016 at 8:20 PM, Dan Sneddon <dsneddon at redhat.com
> > <mailto:dsneddon at redhat.com>> wrote:
> >
> > On 03/25/2016 11:52 AM, Arash Kaffamanesh wrote:
> > > Hi,
> > >
> > > I'm trying to deploy OpenStack via TripleO quickstart in AIO / virt
> > > mode and I'm getting by the last step deploying the overcloud the
> > > following "Heat Stack create failed" message (There are not enough
> > > hosts available, due to Configuration has 4 errors, fix them before
> > > proceeding ????).
> > > *
> > > *
> > >
> > > After running openstack overcloud deploy I'm getting
> > *Configuration has
> > > 4 errors, fix them before proceeding*: (and I guess the problem
> lies
> > > somehow here with the "incorrectly configured driver_info"):
> > >
> > > [stack at undercloud ~]$ openstack overcloud deploy --templates
> > >
> > > Node uuid=a62116c4-1daf-45e9-aa2d-ef8a4effdc20 has an incorrectly
> > > configured driver_info/deploy_ramdisk. Expected
> > > "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
> > >
> > > Node uuid=a62116c4-1daf-45e9-aa2d-ef8a4effdc20 has an incorrectly
> > > configured driver_info/deploy_kernel. Expected
> > > "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
> > >
> > > Node uuid=cfc60017-36e8-4808-842d-8c65ffb5e4b1 has an incorrectly
> > > configured driver_info/deploy_ramdisk. Expected
> > > "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
> > >
> > > Node uuid=cfc60017-36e8-4808-842d-8c65ffb5e4b1 has an incorrectly
> > > configured driver_info/deploy_kernel. Expected
> > > "482254d3-4b0c-4c3f-b2ba-bdf34badbbd3" but got "None".
> > >
> > > *Configuration has 4 errors, fix them before proceeding.* Ignoring
> > > these errors is likely to lead to a failed deploy.
> > >
> > > Deploying templates in the directory
> > > /usr/share/openstack-tripleo-heat-templates
> > >
> > > 2016-03-25 17:45:13 [overcloud]: CREATE_IN_PROGRESS Stack CREATE
> started
> > >
> > > 2016-03-25 17:45:13 [MysqlRootPassword]: CREATE_IN_PROGRESS state
> changed
> > >
> > > 2016-03-25 17:45:14 [Networks]: CREATE_IN_PROGRESS state changed
> > >
> > > .......
> > >
> > > 2016-03-25 17:47:15 [overcloud]: CREATE_FAILED Resource CREATE
> failed:
> > > resources.Compute: ResourceInError:
> resources[0].resources.NovaCompute:
> > > Went to status ERROR due to "Message: No valid host was found.
> *There
> > > are not enough hosts available*., Code: 500"
> > >
> > > *Stack overcloud CREATE_FAILED*
> > >
> > > *Heat Stack create failed.*
> > >
> > > [stack at undercloud ~]$ heat stack-list
> > >
> > >
> +--------------------------------------+------------+---------------+---------------------+--------------+
> > >
> > > | id | stack_name |
> stack_status |
> > > creation_time | updated_time |
> > >
> > >
> +--------------------------------------+------------+---------------+---------------------+--------------+
> > >
> > > | 27fd6b76-7413-4e9b-9b5e-c7afb941ee0e | overcloud |
> > *CREATE_FAILED* |
> > > 2016-03-25T17:45:12 | None |
> > >
> > >
> +--------------------------------------+------------+---------------+---------------------+--------------+
> > >
> > >
> > > By the way I tried to get the stable liberty and the latest mitaka
> > > working with TripleO, no either worked.
> > > And tried also Lars's tutorial here:
> > >
> > >
> http://blog.oddbit.com/2016/02/19/deploy-an-ha-openstack-development-envir/
> > >
> > > had not so much luck, but could learn a lot and would prefer to
> learn
> > > more by running the ansible playbooks by hand as described by Lars.
> > >
> > > Any help / advice is much appreciated.
> > >
> > > Thx,
> > > -Arash
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Rdo-list mailing list
> > > Rdo-list at redhat.com <mailto:Rdo-list at redhat.com>
> > > https://www.redhat.com/mailman/listinfo/rdo-list
> > >
> > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > <mailto:rdo-list-unsubscribe at redhat.com>
> > >
> >
> > This sounds like the nodes either weren't introspected properly, have
> > incorrect boot settings, or do not meet the criteria for your
> flavors.
> >
> > In particular, did you possibly forget to run "openstack baremetal
> > configure boot"? This has to be run after you import the nodes from
> > instack_env.json, and it will assign the kernel and ramdisk to the
> > nodes.
> >
> > The instructions for this process begin here:
> >
> http://docs.openstack.org/developer/tripleo-docs/basic_deployment/basic_deployment_cli.html#introspect-nodes
> >
> > You want to make sure that when you run "openstack baremetal
> > introspection bulk start" that the introspection completes
> > successfully. You can then use "ironic node-list" and "ironic
> node-show
> > <UUID>" to see the basic info about the host. The default baremetal
> > flavor requires 4G of RAM and 40G of hard drive space. Do your nodes
> > meet that minimum criteria? That's another cause of the "not enough
> > hosts available", although I think the configure boot setting is a
> more
> > likely culprit.
> >
> > If you are trying to assign nodes to roles (Controller, Compute,
> etc.),
> > then you will want to review this section:
> >
> >
> http://docs.openstack.org/developer/tripleo-docs/advanced_deployment/profile_matching.html
> >
> > --
> > Dan Sneddon | Principal OpenStack Engineer
> > dsneddon at redhat.com <mailto:dsneddon at redhat.com> |
> > redhat.com/openstack <http://redhat.com/openstack>
> > 650.254.4025 | dsneddon:irc @dxs:twitter
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list at redhat.com <mailto:Rdo-list at redhat.com>
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > <mailto:rdo-list-unsubscribe at redhat.com>
> >
> >
>
> That introspection doesn't look right. Are you sure that you imported
> the nodes?
>
> "openstack baremetal import --json instackenv.json"
>
> You should then see the nodes actually being introspected. Does
> anything show up now in an "ironic node-list"? Try deleting whatever
> shows up in that list with "ironic node-delete <UUID>", then run the
> import command above, followed by "openstack baremetal configure boot",
> followed by "openstack baremetal introspection bulk start".
>
> Start here, and make sure you follow all the steps:
>
>
> http://docs.openstack.org/developer/tripleo-docs/basic_deployment/basic_deployment_cli.html#register-nodes
>
> --
> Dan Sneddon | Principal OpenStack Engineer
> dsneddon at redhat.com | redhat.com/openstack
> 650.254.4025 | dsneddon:irc @dxs:twitter
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20160325/19f74f3f/attachment.html>
More information about the dev
mailing list