[Rdo-list] RDO Manager GUI install with Ceph

[Marius Cornea]

For ssh access you can use the heat-admin user with the private key in
/home/stack/.ssh/id_rsa

On Wed, Sep 9, 2015 at 7:26 PM, Ignacio Bravo <ibravo at ltgfederal.com> wrote:
> Dan,
>
> Thanks for your tips. It seems like there is an issue with the networking
> piece, as that is where all the nodes are in building state. I have
> something similar to this for each one of the Controller nodes:
>
> | NetworkDeployment                 | cac8c93b-b784-4a91-bc23-1a932bb1e62f
> | OS::TripleO::SoftwareDeployment                   | CREATE_IN_PROGRESS |
> 2015-09-09T15:22:10Z | 1               |
> | UpdateDeployment                  | 97359c35-d2c7-4140-98ed-24525ee4be6b
> | OS::Heat::SoftwareDeployment                      | CREATE_IN_PROGRESS |
> 2015-09-09T15:22:10Z | 1               |
>
> Following your advice, I was trying to ssh into the nodes, but didn’t know
> what username/password combination to use. I tried root, heat-admin, stack
> with different password located in /home/stack/triple0-overcloud-passwords
> but none of the combinations seemed to work.
>
> BTW, I am using the instructions from
> https://repos.fedorapeople.org/repos/openstack-m/docs/master/basic_deployment/basic_deployment_cli.html
> and installing in an HP c7000 Blade enclosure.
>
> Thanks,
> IB
>
>
>
> __
> Ignacio Bravo
> LTG Federal, Inc
> www.ltgfederal.com
> Office: (703) 951-7760
>
> On Sep 9, 2015, at 11:40 AM, Dan Sneddon <dsneddon at redhat.com> wrote:
>
> Did that error happen after a long time, like 4 hours? I have seen that
> error
> when the deploy was actually hung, and the token timeout gets reached and
> then
> every API call gets an authentication failed response. Unfortunately, you'll
> need to diagnose what part of the deployment is failing. Here's what I
> usually
> do:
>
> # Get state of all uncompleted resources
> heat resource-list overcloud -n 5 | grep -iv complete
>
> # Look closer at failed resources from above command
> heat resource-show <UUID>
>
> nova list
> (then ssh as heat-admin to the nodes and check for network connectivity and
> errors in the logs)
>
> -Dan Sneddon
>
> ----- Original Message -----
>
> Never hit that. Did you try export HEAT_INCLUDE_PASSWORD=1 and rerun deploy?
>
> On Wed, Sep 9, 2015 at 4:47 PM, Ignacio Bravo <ibravo at ltgfederal.com> wrote:
>
> Thanks. I was able to delete the existing deployment, but when trying to
> deploy again using the CLI I got an authentication error. Ideas?
>
> [root at bl16 ~]# su stack
> [stack at bl16 root]$ cd
> [stack at bl16 ~]$ cd ~
> [stack at bl16 ~]$ source stackrc
> [stack at bl16 ~]$ openstack overcloud deploy --ceph-storage-scale 3
> --control-scale 3 --compute-scale 2 --compute-flavor Compute_24
> --ntp-server
> 192.168.10.1 --templates -e
> /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml
> Deploying templates in the directory
> /usr/share/openstack-tripleo-heat-templates
> ERROR: openstack ERROR: Authentication failed. Please try again with option
> --include-password or export HEAT_INCLUDE_PASSWORD=1
> Authentication required
>
>
>
> __
> Ignacio Bravo
> LTG Federal, Inc
> www.ltgfederal.com
> Office: (703) 951-7760
>
> On Sep 8, 2015, at 5:29 PM, Marius Cornea <marius at remote-lab.net> wrote:
>
> Hi Ignacio,
>
> Yes, I believe ceph currently only works with using direct heat
> templates. You can check the instruction on how to get it deployed via
> cli here [1] Make sure you select the Ceph role on the environment
> specific content (left side column).
>
> To delete existing deployments run 'heat stack-delete overcloud' on
> the undercloud node with the credentials in the stackrc file loaded.
>
> In order to get a HA deployment you just need to deploy 3 controllers
> by passing '--control-scale 3' to the 'openstack overcloud deploy'
> command.
>
> [1]
> https://repos.fedorapeople.org/repos/openstack-m/docs/master/basic_deployment/basic_deployment_cli.html
>
> On Tue, Sep 8, 2015 at 11:07 PM, Ignacio Bravo <ibravo at ltgfederal.com>
> wrote:
>
> All,
>
> I was trying to deploy an overcloud using the RDO Manager GUI (Tuskar UI)
> and the deployment was unsuccessful. It seems that there is a particular
> bug
> currently with deploying a Ceph based storage with the GUI, so I wanted to
> ask the list if
>
> 1. Indeed this was the case.
> 2. How to delete my configuration and redeploy using the CLI
> 3. Finally, if there is any scripted or explained way to perform an HA
> installation. I read the reference to github, but this seems to be more
> about the components but there was not a step by step instruction/
> explanation.
>
>
> Thanks!
> IB
>
> __
> Ignacio Bravo
> LTG Federal, Inc
> www.ltgfederal.com
> Office: (703) 951-7760
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>
>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>
>