[Rdo-list] autoscaling.yaml template
ICHIBA Sara
ichi.sara at gmail.com
Tue Jun 2 21:12:04 UTC 2015
If you see the biginning of the cloud ini: you 'll find out that i
configured a wordpress repo on a web server: 192.168.5.105/repos/wordpress.
and normaly my vm should download the packages from that repos. But, I
don't know why it doesn't
>
> Towards the end of the log is the following:
>
> cloud-init[922]: No package wordpress available.
>
> The main Fedora repository includes wordpress, but the CentOS one does
> not. You will either need to add the CentOS EPEL repository in your boot
> script, or switch to a Fedora cloud image.
>
>
>
> On 03/06/15 08:06, ICHIBA Sara wrote:
> > Hello there,
> >
> > Lately i was trying to make work the autoscaling.yaml template. So I
> > installed a web server and uploaded the wordpress repo . when I launch
> > my template with heat, and take a look at the log of the web server
> > and the db server launched with heat I found these errors. Can you
> > tell me what I can do to fix them? below the logs and attached the
> > temmplate I use
> >
> > ====> database server log
> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
> 15:47:39 +0000. Up 9.78 seconds.
> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
> info++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | Device | Up | Address | Mask
> | Hw-Address |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
> | . |
> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.169 | 255.255.255.0 |
> fa:16:3e:f3:f2:25 |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
> info++++++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
> | Interface | Flags |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
> | eth0 | UG |
> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
> 255.255.255.0 | eth0 | U |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> >
> > CentOS Linux 7 (Core)
> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
> >
> > host-20-0-0-169 login: cloud-init[901]: Cloud-init v. 0.7.5 running
> 'modules:config' at Tue, 02 Jun 2015 15:47:44 +0000. Up 15.32 seconds.
> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
> Jun 2015 15:47:45 +0000. Up 15.87 seconds.
> > cloud-init[922]: #!/bin/bash -v
> > cloud-init[922]: cat << EOF > /etc/resolv.conf
> > cloud-init[922]: nameserver 8.8.8.8
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install firewalld
> > cloud-init[922]: Loaded plugins: fastestmirror
> > cloud-init[922]: Determining fastest mirrors
> > cloud-init[922]: * base:centos.quelquesmots.fr <
> http://centos.quelquesmots.fr/>
> > cloud-init[922]: * extras:centos.mirrors.ovh.net <
> http://centos.mirrors.ovh.net/>
> > cloud-init[922]: * updates:centos.quelquesmots.fr <
> http://centos.quelquesmots.fr/>
> > cloud-init[922]: Resolving Dependencies
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package firewalld.noarch 0:0.3.9-11.el7 will be
> installed
> > cloud-init[922]: --> Processing Dependency: python-slip-dbus for
> package: firewalld-0.3.9-11.el7.noarch
> > cloud-init[922]: --> Processing Dependency: ebtables for package:
> firewalld-0.3.9-11.el7.noarch
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package ebtables.x86_64 0:2.0.10-13.el7 will be
> installed
> > cloud-init[922]: ---> Package python-slip-dbus.noarch 0:0.4.0-2.el7 will
> be installed
> > cloud-init[922]: --> Processing Dependency: python-slip = 0.4.0-2.el7
> for package: python-slip-dbus-0.4.0-2.el7.noarch
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package python-slip.noarch 0:0.4.0-2.el7 will be
> installed
> > cloud-init[922]: --> Finished Dependency Resolution
> > cloud-init[922]: Dependencies Resolved
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Package Arch Version
> Repository Size
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Installing:
> > cloud-init[922]: firewalld noarch 0.3.9-11.el7
> base 465 k
> > cloud-init[922]: Installing for dependencies:
> > cloud-init[922]: ebtables x86_64 2.0.10-13.el7
> base 122 k
> > cloud-init[922]: python-slip noarch 0.4.0-2.el7
> base 30 k
> > cloud-init[922]: python-slip-dbus noarch 0.4.0-2.el7
> base 31 k
> > cloud-init[922]: Transaction Summary
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Install 1 Package (+3 Dependent packages)
> > cloud-init[922]: Total download size: 649 k
> > cloud-init[922]: Installed size: 2.8 M
> > cloud-init[922]: Downloading packages:
> > cloud-init[922]: warning:
> /var/cache/yum/x86_64/7/base/packages/python-slip-0.4.0-2.el7.noarch.rpm:
> Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> > cloud-init[922]: Public key for python-slip-0.4.0-2.el7.noarch.rpm is
> not installed
> > cloud-init[922]:
> --------------------------------------------------------------------------------
> > cloud-init[922]: Total 462
> kB/s | 649 kB 00:01
> > cloud-init[922]: Retrieving key from
> file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
> Key) <security at centos.org <mailto:security at centos.org>>"
> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
> f4a8 0eb5
> > cloud-init[922]: Package :
> centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Running transaction check
> > cloud-init[922]: Running transaction test
> > cloud-init[922]: Transaction test succeeded
> > cloud-init[922]: Running transaction
> > cloud-init[922]: Installing : python-slip-0.4.0-2.el7.noarch
> 1/4
> > cloud-init[922]: Installing : python-slip-dbus-0.4.0-2.el7.noarch
> 2/4
> > cloud-init[922]: Installing : ebtables-2.0.10-13.el7.x86_64
> 3/4
> > cloud-init[922]: Installing : firewalld-0.3.9-11.el7.noarch
> 4/4
> > cloud-init[922]: Verifying : firewalld-0.3.9-11.el7.noarch
> 1/4
> > cloud-init[922]: Verifying : python-slip-dbus-0.4.0-2.el7.noarch
> 2/4
> > cloud-init[922]: Verifying : ebtables-2.0.10-13.el7.x86_64
> 3/4
> > cloud-init[922]: Verifying : python-slip-0.4.0-2.el7.noarch
> 4/4
> > cloud-init[922]: Installed:
> > cloud-init[922]: firewalld.noarch 0:0.3.9-11.el7
> > cloud-init[922]: Dependency Installed:
> > cloud-init[922]: ebtables.x86_64 0:2.0.10-13.el7
> python-slip.noarch 0:0.4.0-2.el7
> > cloud-init[922]: python-slip-dbus.noarch 0:0.4.0-2.el7
> > cloud-init[922]: Complete!
> > cloud-init[922]: systemctl start firewalld
> > Starting firewalld - dynamic firewall daemon...
> > [ 37.378596] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 37.429522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 37.491387] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 37.539733] Ebtables v2.0 registered
> > [ 37.572087] Bridge firewalling registered
> > [[32m OK [0m] Started firewalld - dynamic firewall daemon.
> > cloud-init[922]: systemctl enable firewalld
> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> > [ 40.564139] Adjusting kvm-clock more than 11% (9437184 vs 9311354)
> > cloud-init[922]: ERROR:dbus.proxies:Introspect error on
> :1.6:/org/fedoraproject/FirewallD1: dbus.exceptions.DBusException:
> org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
> causes include: the remote application did not send a reply, the message
> bus security policy blocked the reply, the reply timeout expired, or the
> network connection was broken.
> > Starting Authorization Manager...
> > [[32m OK [0m] Started Authorization Manager.
> > [[32m OK [0m] Created slice user-0.slice.
> > Starting Cleanup of Temporary Directories...
> > [[32m OK [0m] Started Cleanup of Temporary Directories.
> > ===>web-server log
> > cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015
> 16:01:42 +0000. Up 12.17 seconds.
> > cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device
> info++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | Device | Up | Address | Mask
> | Hw-Address |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0
> | . |
> > cloud-init[728]: ci-info: | eth0: | True | 20.0.0.172 | 255.255.255.0 |
> fa:16:3e:61:e9:0e |
> > cloud-init[728]: ci-info:
> +--------+------+------------+---------------+-------------------+
> > cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route
> info++++++++++++++++++++++++++++++
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask
> | Interface | Flags |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> > cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0
> | eth0 | UG |
> > cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 |
> 255.255.255.0 | eth0 | U |
> > cloud-init[728]: ci-info:
> +-------+-------------+----------+---------------+-----------+-------+
> >
> > CentOS Linux 7 (Core)
> > Kernel 3.10.0-229.el7.x86_64 on an x86_64
> >
> > host-20-0-0-172 login: cloud-init[901]: Cloud-init v. 0.7.5 running
> 'modules:config' at Tue, 02 Jun 2015 16:01:47 +0000. Up 16.92 seconds.
> > cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02
> Jun 2015 16:01:47 +0000. Up 17.53 seconds.
> > cloud-init[922]: #!/bin/bash -v
> > cloud-init[922]: cat << EOF > /etc/resolv.conf
> > cloud-init[922]: nameserver 8.8.8.8
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install firewalld
> > cloud-init[922]: systemctl start firewalld
> > cloud-init[922]: systemctl enable firewalld
> > cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> > cloud-init[922]: firewall-cmd --permanent --add-port=80/tcp
> > cloud-init[922]: firewall-cmd --permanent --add-port=443/tcp
> > cloud-init[922]: firewall-cmd --reload
> > cloud-init[922]: cat << EOF >> /etc/yum.repos.d/rhel.repo
> > cloud-init[922]: [rhel-7-server-rpms]
> > cloud-init[922]: name=rhel-7-server-rpms
> > cloud-init[922]: baseurl=http://172.16.0.129:81/repos/rhel-7-server-rpms
> > cloud-init[922] <
> http://172.16.0.129:81/repos/rhel-7-server-rpmscloud-init%5B922%5D>:
> gpgcheck=0
> > cloud-init[922]: enabled=1
> > cloud-init[922]: [wordpress]
> > cloud-init[922]: name=wordpress
> > cloud-init[922]: baseurl=http://192.168.5.105:80/repos/wordpress
> > cloud-init[922] <
> http://192.168.5.105:80/repos/wordpresscloud-init%5B922%5D>: gpgcheck=0
> > cloud-init[922]: enabled=1
> > cloud-init[922]: EOF
> > cloud-init[922]: yum -y install httpd wordpress
> > cloud-init[922]: Loaded plugins: fastestmirror
> > cloud-init[922]: Determining fastest mirrors
> > cloud-init[922]: * base:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
> > cloud-init[922]: * extras:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
> > cloud-init[922]: * updates:centos.crazyfrogs.org <
> http://centos.crazyfrogs.org>
> > cloud-init[922]: No package wordpress available.
> > cloud-init[922]: Resolving Dependencies
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package httpd.x86_64 0:2.4.6-31.el7.centos will be
> installed
> > cloud-init[922]: --> Processing Dependency: httpd-tools =
> 2.4.6-31.el7.centos for package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: /etc/mime.types for package:
> httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: libaprutil-1.so.0()(64bit)
> for package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Processing Dependency: libapr-1.so.0()(64bit) for
> package: httpd-2.4.6-31.el7.centos.x86_64
> > cloud-init[922]: --> Running transaction check
> > cloud-init[922]: ---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
> > cloud-init[922]: ---> Package apr-util.x86_64 0:1.5.2-6.el7 will be
> installed
> > cloud-init[922]: ---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos
> will be installed
> > cloud-init[922]: ---> Package mailcap.noarch 0:2.1.41-2.el7 will be
> installed
> > cloud-init[922]: --> Finished Dependency Resolution
> > cloud-init[922]: Dependencies Resolved
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Package Arch Version
> Repository Size
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Installing:
> > cloud-init[922]: httpd x86_64 2.4.6-31.el7.centos
> base 2.7 M
> > cloud-init[922]: Installing for dependencies:
> > cloud-init[922]: apr x86_64 1.4.8-3.el7
> base 103 k
> > cloud-init[922]: apr-util x86_64 1.5.2-6.el7
> base 92 k
> > cloud-init[922]: httpd-tools x86_64 2.4.6-31.el7.centos
> base 79 k
> > cloud-init[922]: mailcap noarch 2.1.41-2.el7
> base 31 k
> > cloud-init[922]: Transaction Summary
> > cloud-init[922]:
> ================================================================================
> > cloud-init[922]: Install 1 Package (+4 Dependent packages)
> > cloud-init[922]: Total download size: 3.0 M
> > cloud-init[922]: Installed size: 10 M
> > cloud-init[922]: Downloading packages:
> > cloud-init[922]: warning:
> /var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3
> RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> > cloud-init[922]: Public key for apr-1.4.8-3.el7.x86_64.rpm is not
> installed
> > cloud-init[922]:
> --------------------------------------------------------------------------------
> > cloud-init[922]: Total 949
> kB/s | 3.0 MB 00:03
> > cloud-init[922]: Retrieving key from
> file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Importing GPG key 0xF4A80EB5:
> > cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing
> Key) <security at centos.org <mailto:security at centos.org>>"
> > cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7
> f4a8 0eb5
> > cloud-init[922]: Package :
> centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> > cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> > cloud-init[922]: Running transaction check
> > cloud-init[922]: Running transaction test
> > cloud-init[922]: Transaction test succeeded
> > cloud-init[922]: Running transaction
> > cloud-init[922]: Installing : apr-1.4.8-3.el7.x86_64
> 1/5
> > cloud-init[922]: Installing : apr-util-1.5.2-6.el7.x86_64
> 2/5
> > cloud-init[922]: Installing : httpd-tools-2.4.6-31.el7.centos.x86_64
> 3/5
> > cloud-init[922]: Installing : mailcap-2.1.41-2.el7.noarch
> 4/5
> > cloud-init[922]: Installing : httpd-2.4.6-31.el7.centos.x86_64
> 5/5
> > cloud-init[922]: Verifying : httpd-tools-2.4.6-31.el7.centos.x86_64
> 1/5
> > cloud-init[922]: Verifying : apr-1.4.8-3.el7.x86_64
> 2/5
> > cloud-init[922]: Verifying : mailcap-2.1.41-2.el7.noarch
> 3/5
> > cloud-init[922]: Verifying : httpd-2.4.6-31.el7.centos.x86_64
> 4/5
> > cloud-init[922]: Verifying : apr-util-1.5.2-6.el7.x86_64
> 5/5
> > cloud-init[922]: Installed:
> > cloud-init[922]: httpd.x86_64 0:2.4.6-31.el7.centos
> > cloud-init[922]: Dependency Installed:
> > cloud-init[922]: apr.x86_64 0:1.4.8-3.el7
> apr-util.x86_64 0:1.5.2-6.el7
> > cloud-init[922]: httpd-tools.x86_64 0:2.4.6-31.el7.centos
> mailcap.noarch 0:2.1.41-2.el7
> > cloud-init[922]: Complete!
> > cloud-init[922]: systemctl start httpd.service
> > Starting The Apache HTTP Server...
> > [[32m OK [0m] Started The Apache HTTP Server.
> > cloud-init[922]: systemctl enable httpd.service
> > cloud-init[922]: ln -s '/usr/lib/systemd/system/httpd.service'
> '/etc/systemd/system/multi-user.target.wants/httpd.service'
> > cloud-init[922]: setsebool -P httpd_can_network_connect_db=1
> > cloud-init[922]: sed -i "/Deny from All/d"
> /etc/httpd/conf.d/wordpress.conf
> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
> such file or directory
> > cloud-init[922]: sed -i "s/Require local/Require all granted/"
> /etc/httpd/conf.d/wordpress.conf
> > cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No
> such file or directory
> > cloud-init[922]: sed -i s/database_name_here/wordpress/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i s/username_here/wordpress/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i
> s/password_here/GJM76RbvIje4C7eh2aOdlQQedqvxjBH2/
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: sed -i s/localhost/20.0.0.68/ <http://20.0.0.68/>
> /etc/wordpress/wp-config.php
> > cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such
> file or directory
> > cloud-init[922]: systemctl restart httpd.service
> > Stopping The Apache HTTP Server...
> > [[32m OK [0m] Stopped The Apache HTTP Server.
> > Starting The Apache HTTP Server...
> > [[32m OK [0m] Started The Apache HTTP Server.
> > ci-info: ++++++++++Authorized keys from
> /home/centos/.ssh/authorized_keys for user centos+++++++++++
> > ci-info:
> +---------+-------------------------------------------------+---------+-------------------+
> > ci-info: | Keytype | Fingerprint (md5) |
> Options | Comment |
> > ci-info:
> +---------+-------------------------------------------------+---------+-------------------+
> > ci-info: | ssh-rsa | 2d:b8:76:2f:ab:f5:f1:72:f8:75:46:00:f9:d3:24:60 |
> - | Generated-by-Nova |
> > ci-info:
> +---------+-------------------------------------------------+---------+-------------------+
> > ec2:
> > ec2: #############################################################
> > ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
> > ec2: 256 88:ab:b1:ac:08:d9:70:41:f2:04:14:a3:1a:4d:02:fe (ECDSA)
> > ec2: 256 0e:3e:9b:d5:4b:cb:c9:78:c7:99:a4:bf:05:0d:7a:a8 (ED25519)
> > ec2: 2048 f2:f8:e5:70:d1:f4:f0:57:ea:9c:d1:75:f3:75:17:22 (RSA)
> > ec2: -----END SSH HOST KEY FINGERPRINTS-----
> > ec2: #############################################################
> > -----BEGIN SSH HOST KEY KEYS-----
> > ecdsa-sha2-nistp256
> AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCXquFpCyVkwLlWJ81GozEjViYP41EELARbVt5ISfsRCDNGk31bsGmgy7ecjg7g1LRtTxTs0OWJ3Hy2fZhio1KQ=
> > ssh-ed25519
> AAAAC3NzaC1lZDI1NTE5AAAAICORDKYmglupDLdv8Cj5ut14BpD65Grm8p0SQDifMans
> > ssh-rsa
> AAAAB3NzaC1yc2EAAAADAQABAAABAQDTQjdbT8OCAnmV5bbO/llks+2E26pajgS9ZortTLKOGQp9KmYMIq9CXjUWQjmn+vlFMPkyMk4DG9K/XDX3WRXgErNUpIsmJPUMOnoyxz4U+dYCOSm7pUfoyQphvqxGzkzC/UMwHYcakSpUssLUY85ZcoIz9HmaNTkiiHoJe/ezvjVrAAAcOViYL2qcOATf7MfNqkyqJlk65O7k5pf3+RFh9ta1rijubzaHfBZxKiQfVeJV61vwmF6tBONDOlC/BVSI+k/zg0Evsn+5uKPlhsoeB5uSr1DxTSdBYn3yrHcqceEtgh2uiwhS7prvU911KfRjkf+PwGvtDg9iLlAuJioV
> > -----END SSH HOST KEY KEYS-----
> > cloud-init[922]: Cloud-init v. 0.7.5 finished at Tue, 02 Jun 2015
> 16:02:31 +0000. Datasource DataSourceOpenStack [net,ver=2]. Up 60.92
> seconds
> > [[32m OK [0m] Started Execute cloud user/final scripts.
> > [[32m OK [0m] Reached target Multi-User System.
> >
> >
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://www.redhat.com/archives/rdo-list/attachments/20150603/b703d8c3/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
>
> End of Rdo-list Digest, Vol 27, Issue 4
> ***************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20150602/3fddc1bd/attachment.html>
More information about the dev
mailing list