[Rdo-list] autoscaling.yaml template
Steve Baker
sbaker at redhat.com
Tue Jun 2 20:27:50 UTC 2015
Towards the end of the log is the following:
cloud-init[922]: No package wordpress available.
The main Fedora repository includes wordpress, but the CentOS one does not. You will either need to add the CentOS EPEL repository in your boot script, or switch to a Fedora cloud image.
On 03/06/15 08:06, ICHIBA Sara wrote:
> Hello there,
>
> Lately i was trying to make work the autoscaling.yaml template. So I
> installed a web server and uploaded the wordpress repo . when I launch
> my template with heat, and take a look at the log of the web server
> and the db server launched with heat I found these errors. Can you
> tell me what I can do to fix them? below the logs and attached the
> temmplate I use
>
> ====> database server log
> cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015 15:47:39 +0000. Up 9.78 seconds.
> cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device info++++++++++++++++++++++++++
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | Device | Up | Address | Mask | Hw-Address |
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0 | . |
> cloud-init[728]: ci-info: | eth0: | True | 20.0.0.169 | 255.255.255.0 | fa:16:3e:f3:f2:25 |
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route info++++++++++++++++++++++++++++++
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0 | eth0 | UG |
> cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
>
> CentOS Linux 7 (Core)
> Kernel 3.10.0-229.el7.x86_64 on an x86_64
>
> host-20-0-0-169 login: cloud-init[901]: Cloud-init v. 0.7.5 running 'modules:config' at Tue, 02 Jun 2015 15:47:44 +0000. Up 15.32 seconds.
> cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02 Jun 2015 15:47:45 +0000. Up 15.87 seconds.
> cloud-init[922]: #!/bin/bash -v
> cloud-init[922]: cat << EOF > /etc/resolv.conf
> cloud-init[922]: nameserver 8.8.8.8
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install firewalld
> cloud-init[922]: Loaded plugins: fastestmirror
> cloud-init[922]: Determining fastest mirrors
> cloud-init[922]: * base:centos.quelquesmots.fr <http://centos.quelquesmots.fr/>
> cloud-init[922]: * extras:centos.mirrors.ovh.net <http://centos.mirrors.ovh.net/>
> cloud-init[922]: * updates:centos.quelquesmots.fr <http://centos.quelquesmots.fr/>
> cloud-init[922]: Resolving Dependencies
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package firewalld.noarch 0:0.3.9-11.el7 will be installed
> cloud-init[922]: --> Processing Dependency: python-slip-dbus for package: firewalld-0.3.9-11.el7.noarch
> cloud-init[922]: --> Processing Dependency: ebtables for package: firewalld-0.3.9-11.el7.noarch
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package ebtables.x86_64 0:2.0.10-13.el7 will be installed
> cloud-init[922]: ---> Package python-slip-dbus.noarch 0:0.4.0-2.el7 will be installed
> cloud-init[922]: --> Processing Dependency: python-slip = 0.4.0-2.el7 for package: python-slip-dbus-0.4.0-2.el7.noarch
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package python-slip.noarch 0:0.4.0-2.el7 will be installed
> cloud-init[922]: --> Finished Dependency Resolution
> cloud-init[922]: Dependencies Resolved
> cloud-init[922]: ================================================================================
> cloud-init[922]: Package Arch Version Repository Size
> cloud-init[922]: ================================================================================
> cloud-init[922]: Installing:
> cloud-init[922]: firewalld noarch 0.3.9-11.el7 base 465 k
> cloud-init[922]: Installing for dependencies:
> cloud-init[922]: ebtables x86_64 2.0.10-13.el7 base 122 k
> cloud-init[922]: python-slip noarch 0.4.0-2.el7 base 30 k
> cloud-init[922]: python-slip-dbus noarch 0.4.0-2.el7 base 31 k
> cloud-init[922]: Transaction Summary
> cloud-init[922]: ================================================================================
> cloud-init[922]: Install 1 Package (+3 Dependent packages)
> cloud-init[922]: Total download size: 649 k
> cloud-init[922]: Installed size: 2.8 M
> cloud-init[922]: Downloading packages:
> cloud-init[922]: warning: /var/cache/yum/x86_64/7/base/packages/python-slip-0.4.0-2.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> cloud-init[922]: Public key for python-slip-0.4.0-2.el7.noarch.rpm is not installed
> cloud-init[922]: --------------------------------------------------------------------------------
> cloud-init[922]: Total 462 kB/s | 649 kB 00:01
> cloud-init[922]: Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Importing GPG key 0xF4A80EB5:
> cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <security at centos.org <mailto:security at centos.org>>"
> cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
> cloud-init[922]: Package : centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Running transaction check
> cloud-init[922]: Running transaction test
> cloud-init[922]: Transaction test succeeded
> cloud-init[922]: Running transaction
> cloud-init[922]: Installing : python-slip-0.4.0-2.el7.noarch 1/4
> cloud-init[922]: Installing : python-slip-dbus-0.4.0-2.el7.noarch 2/4
> cloud-init[922]: Installing : ebtables-2.0.10-13.el7.x86_64 3/4
> cloud-init[922]: Installing : firewalld-0.3.9-11.el7.noarch 4/4
> cloud-init[922]: Verifying : firewalld-0.3.9-11.el7.noarch 1/4
> cloud-init[922]: Verifying : python-slip-dbus-0.4.0-2.el7.noarch 2/4
> cloud-init[922]: Verifying : ebtables-2.0.10-13.el7.x86_64 3/4
> cloud-init[922]: Verifying : python-slip-0.4.0-2.el7.noarch 4/4
> cloud-init[922]: Installed:
> cloud-init[922]: firewalld.noarch 0:0.3.9-11.el7
> cloud-init[922]: Dependency Installed:
> cloud-init[922]: ebtables.x86_64 0:2.0.10-13.el7 python-slip.noarch 0:0.4.0-2.el7
> cloud-init[922]: python-slip-dbus.noarch 0:0.4.0-2.el7
> cloud-init[922]: Complete!
> cloud-init[922]: systemctl start firewalld
> Starting firewalld - dynamic firewall daemon...
> [ 37.378596] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 37.429522] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 37.491387] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 37.539733] Ebtables v2.0 registered
> [ 37.572087] Bridge firewalling registered
> [[32m OK [0m] Started firewalld - dynamic firewall daemon.
> cloud-init[922]: systemctl enable firewalld
> cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> [ 40.564139] Adjusting kvm-clock more than 11% (9437184 vs 9311354)
> cloud-init[922]: ERROR:dbus.proxies:Introspect error on :1.6:/org/fedoraproject/FirewallD1: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
> Starting Authorization Manager...
> [[32m OK [0m] Started Authorization Manager.
> [[32m OK [0m] Created slice user-0.slice.
> Starting Cleanup of Temporary Directories...
> [[32m OK [0m] Started Cleanup of Temporary Directories.
> ===>web-server log
> cloud-init[728]: Cloud-init v. 0.7.5 running 'init' at Tue, 02 Jun 2015 16:01:42 +0000. Up 12.17 seconds.
> cloud-init[728]: ci-info: +++++++++++++++++++++++++Net device info++++++++++++++++++++++++++
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | Device | Up | Address | Mask | Hw-Address |
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: | lo: | True | 127.0.0.1 | 255.0.0.0 | . |
> cloud-init[728]: ci-info: | eth0: | True | 20.0.0.172 | 255.255.255.0 | fa:16:3e:61:e9:0e |
> cloud-init[728]: ci-info: +--------+------+------------+---------------+-------------------+
> cloud-init[728]: ci-info: ++++++++++++++++++++++++++++++Route info++++++++++++++++++++++++++++++
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
> cloud-init[728]: ci-info: | 0 | 0.0.0.0 | 20.0.0.1 | 0.0.0.0 | eth0 | UG |
> cloud-init[728]: ci-info: | 1 | 20.0.0.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
> cloud-init[728]: ci-info: +-------+-------------+----------+---------------+-----------+-------+
>
> CentOS Linux 7 (Core)
> Kernel 3.10.0-229.el7.x86_64 on an x86_64
>
> host-20-0-0-172 login: cloud-init[901]: Cloud-init v. 0.7.5 running 'modules:config' at Tue, 02 Jun 2015 16:01:47 +0000. Up 16.92 seconds.
> cloud-init[922]: Cloud-init v. 0.7.5 running 'modules:final' at Tue, 02 Jun 2015 16:01:47 +0000. Up 17.53 seconds.
> cloud-init[922]: #!/bin/bash -v
> cloud-init[922]: cat << EOF > /etc/resolv.conf
> cloud-init[922]: nameserver 8.8.8.8
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install firewalld
> cloud-init[922]: systemctl start firewalld
> cloud-init[922]: systemctl enable firewalld
> cloud-init[922]: firewall-cmd --permanent --add-port=3306/tcp
> cloud-init[922]: firewall-cmd --permanent --add-port=80/tcp
> cloud-init[922]: firewall-cmd --permanent --add-port=443/tcp
> cloud-init[922]: firewall-cmd --reload
> cloud-init[922]: cat << EOF >> /etc/yum.repos.d/rhel.repo
> cloud-init[922]: [rhel-7-server-rpms]
> cloud-init[922]: name=rhel-7-server-rpms
> cloud-init[922]: baseurl=http://172.16.0.129:81/repos/rhel-7-server-rpms
> cloud-init[922] <http://172.16.0.129:81/repos/rhel-7-server-rpmscloud-init%5B922%5D>: gpgcheck=0
> cloud-init[922]: enabled=1
> cloud-init[922]: [wordpress]
> cloud-init[922]: name=wordpress
> cloud-init[922]: baseurl=http://192.168.5.105:80/repos/wordpress
> cloud-init[922] <http://192.168.5.105:80/repos/wordpresscloud-init%5B922%5D>: gpgcheck=0
> cloud-init[922]: enabled=1
> cloud-init[922]: EOF
> cloud-init[922]: yum -y install httpd wordpress
> cloud-init[922]: Loaded plugins: fastestmirror
> cloud-init[922]: Determining fastest mirrors
> cloud-init[922]: * base:centos.crazyfrogs.org <http://centos.crazyfrogs.org>
> cloud-init[922]: * extras:centos.crazyfrogs.org <http://centos.crazyfrogs.org>
> cloud-init[922]: * updates:centos.crazyfrogs.org <http://centos.crazyfrogs.org>
> cloud-init[922]: No package wordpress available.
> cloud-init[922]: Resolving Dependencies
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package httpd.x86_64 0:2.4.6-31.el7.centos will be installed
> cloud-init[922]: --> Processing Dependency: httpd-tools = 2.4.6-31.el7.centos for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: /etc/mime.types for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.x86_64
> cloud-init[922]: --> Running transaction check
> cloud-init[922]: ---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
> cloud-init[922]: ---> Package apr-util.x86_64 0:1.5.2-6.el7 will be installed
> cloud-init[922]: ---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos will be installed
> cloud-init[922]: ---> Package mailcap.noarch 0:2.1.41-2.el7 will be installed
> cloud-init[922]: --> Finished Dependency Resolution
> cloud-init[922]: Dependencies Resolved
> cloud-init[922]: ================================================================================
> cloud-init[922]: Package Arch Version Repository Size
> cloud-init[922]: ================================================================================
> cloud-init[922]: Installing:
> cloud-init[922]: httpd x86_64 2.4.6-31.el7.centos base 2.7 M
> cloud-init[922]: Installing for dependencies:
> cloud-init[922]: apr x86_64 1.4.8-3.el7 base 103 k
> cloud-init[922]: apr-util x86_64 1.5.2-6.el7 base 92 k
> cloud-init[922]: httpd-tools x86_64 2.4.6-31.el7.centos base 79 k
> cloud-init[922]: mailcap noarch 2.1.41-2.el7 base 31 k
> cloud-init[922]: Transaction Summary
> cloud-init[922]: ================================================================================
> cloud-init[922]: Install 1 Package (+4 Dependent packages)
> cloud-init[922]: Total download size: 3.0 M
> cloud-init[922]: Installed size: 10 M
> cloud-init[922]: Downloading packages:
> cloud-init[922]: warning: /var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
> cloud-init[922]: Public key for apr-1.4.8-3.el7.x86_64.rpm is not installed
> cloud-init[922]: --------------------------------------------------------------------------------
> cloud-init[922]: Total 949 kB/s | 3.0 MB 00:03
> cloud-init[922]: Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Importing GPG key 0xF4A80EB5:
> cloud-init[922]: Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <security at centos.org <mailto:security at centos.org>>"
> cloud-init[922]: Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
> cloud-init[922]: Package : centos-release-7-1.1503.el7.centos.2.7.x86_64 (installed)
> cloud-init[922]: From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
> cloud-init[922]: Running transaction check
> cloud-init[922]: Running transaction test
> cloud-init[922]: Transaction test succeeded
> cloud-init[922]: Running transaction
> cloud-init[922]: Installing : apr-1.4.8-3.el7.x86_64 1/5
> cloud-init[922]: Installing : apr-util-1.5.2-6.el7.x86_64 2/5
> cloud-init[922]: Installing : httpd-tools-2.4.6-31.el7.centos.x86_64 3/5
> cloud-init[922]: Installing : mailcap-2.1.41-2.el7.noarch 4/5
> cloud-init[922]: Installing : httpd-2.4.6-31.el7.centos.x86_64 5/5
> cloud-init[922]: Verifying : httpd-tools-2.4.6-31.el7.centos.x86_64 1/5
> cloud-init[922]: Verifying : apr-1.4.8-3.el7.x86_64 2/5
> cloud-init[922]: Verifying : mailcap-2.1.41-2.el7.noarch 3/5
> cloud-init[922]: Verifying : httpd-2.4.6-31.el7.centos.x86_64 4/5
> cloud-init[922]: Verifying : apr-util-1.5.2-6.el7.x86_64 5/5
> cloud-init[922]: Installed:
> cloud-init[922]: httpd.x86_64 0:2.4.6-31.el7.centos
> cloud-init[922]: Dependency Installed:
> cloud-init[922]: apr.x86_64 0:1.4.8-3.el7 apr-util.x86_64 0:1.5.2-6.el7
> cloud-init[922]: httpd-tools.x86_64 0:2.4.6-31.el7.centos mailcap.noarch 0:2.1.41-2.el7
> cloud-init[922]: Complete!
> cloud-init[922]: systemctl start httpd.service
> Starting The Apache HTTP Server...
> [[32m OK [0m] Started The Apache HTTP Server.
> cloud-init[922]: systemctl enable httpd.service
> cloud-init[922]: ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service'
> cloud-init[922]: setsebool -P httpd_can_network_connect_db=1
> cloud-init[922]: sed -i "/Deny from All/d" /etc/httpd/conf.d/wordpress.conf
> cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No such file or directory
> cloud-init[922]: sed -i "s/Require local/Require all granted/" /etc/httpd/conf.d/wordpress.conf
> cloud-init[922]: sed: can't read /etc/httpd/conf.d/wordpress.conf: No such file or directory
> cloud-init[922]: sed -i s/database_name_here/wordpress/ /etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such file or directory
> cloud-init[922]: sed -i s/username_here/wordpress/ /etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such file or directory
> cloud-init[922]: sed -i s/password_here/GJM76RbvIje4C7eh2aOdlQQedqvxjBH2/ /etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such file or directory
> cloud-init[922]: sed -i s/localhost/20.0.0.68/ <http://20.0.0.68/> /etc/wordpress/wp-config.php
> cloud-init[922]: sed: can't read /etc/wordpress/wp-config.php: No such file or directory
> cloud-init[922]: systemctl restart httpd.service
> Stopping The Apache HTTP Server...
> [[32m OK [0m] Stopped The Apache HTTP Server.
> Starting The Apache HTTP Server...
> [[32m OK [0m] Started The Apache HTTP Server.
> ci-info: ++++++++++Authorized keys from /home/centos/.ssh/authorized_keys for user centos+++++++++++
> ci-info: +---------+-------------------------------------------------+---------+-------------------+
> ci-info: | Keytype | Fingerprint (md5) | Options | Comment |
> ci-info: +---------+-------------------------------------------------+---------+-------------------+
> ci-info: | ssh-rsa | 2d:b8:76:2f:ab:f5:f1:72:f8:75:46:00:f9:d3:24:60 | - | Generated-by-Nova |
> ci-info: +---------+-------------------------------------------------+---------+-------------------+
> ec2:
> ec2: #############################################################
> ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
> ec2: 256 88:ab:b1:ac:08:d9:70:41:f2:04:14:a3:1a:4d:02:fe (ECDSA)
> ec2: 256 0e:3e:9b:d5:4b:cb:c9:78:c7:99:a4:bf:05:0d:7a:a8 (ED25519)
> ec2: 2048 f2:f8:e5:70:d1:f4:f0:57:ea:9c:d1:75:f3:75:17:22 (RSA)
> ec2: -----END SSH HOST KEY FINGERPRINTS-----
> ec2: #############################################################
> -----BEGIN SSH HOST KEY KEYS-----
> ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCXquFpCyVkwLlWJ81GozEjViYP41EELARbVt5ISfsRCDNGk31bsGmgy7ecjg7g1LRtTxTs0OWJ3Hy2fZhio1KQ=
> ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICORDKYmglupDLdv8Cj5ut14BpD65Grm8p0SQDifMans
> ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDTQjdbT8OCAnmV5bbO/llks+2E26pajgS9ZortTLKOGQp9KmYMIq9CXjUWQjmn+vlFMPkyMk4DG9K/XDX3WRXgErNUpIsmJPUMOnoyxz4U+dYCOSm7pUfoyQphvqxGzkzC/UMwHYcakSpUssLUY85ZcoIz9HmaNTkiiHoJe/ezvjVrAAAcOViYL2qcOATf7MfNqkyqJlk65O7k5pf3+RFh9ta1rijubzaHfBZxKiQfVeJV61vwmF6tBONDOlC/BVSI+k/zg0Evsn+5uKPlhsoeB5uSr1DxTSdBYn3yrHcqceEtgh2uiwhS7prvU911KfRjkf+PwGvtDg9iLlAuJioV
> -----END SSH HOST KEY KEYS-----
> cloud-init[922]: Cloud-init v. 0.7.5 finished at Tue, 02 Jun 2015 16:02:31 +0000. Datasource DataSourceOpenStack [net,ver=2]. Up 60.92 seconds
> [[32m OK [0m] Started Execute cloud user/final scripts.
> [[32m OK [0m] Reached target Multi-User System.
>
>
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20150603/b703d8c3/attachment.html>
More information about the dev
mailing list