[rdo-users] [tripleo][ussuri][centos8] overcloud deploy fails with no valid host was found, GRUB2 cannot mount with regular user

[Ruslanas Gžibovskis]

I will deploy essential part of my cloud and will continue with newer image
to test

On Sat, 23 Jan 2021 at 14:31, Ruslanas Gžibovskis <ruslanas at lpic.lt> wrote:

> I have used older images, with a bit less sw, but still, with my
> modifications, and it works.
>
> drwxrwxr-x.  3 stack stack         27 Dec 22 15:51 ironic-python-agent.d
> -rw-rw-r--.  1 stack stack  514499100 Dec 22 19:07
> ironic-python-agent.initramfs
> -rwxr-xr-x.  1 stack stack    9514120 Dec 22 15:52
> ironic-python-agent.kernel
> -rw-rw-r--.  1 stack stack     511381 Dec 22 15:52 ironic-python-agent.log
> drwxrwxr-x.  3 stack stack         27 Dec 22 15:39 overcloud-full.d
> -rw-r--r--.  1 root  root    62170282 Dec 22 15:39 overcloud-full.initrd
> -rw-rw-r--.  1 stack stack     810492 Dec 22 15:43 overcloud-full.log
> -rw-r--r--.  1 stack stack 1199177728 Dec 22 19:09 overcloud-full.qcow2
> -rwxr-xr-x.  1 root  root     9514120 Dec 22 15:39 overcloud-full.vmlinuz
>
> after this date, it does not work...
>
> On Sat, 23 Jan 2021 at 11:55, Ruslanas Gžibovskis <ruslanas at lpic.lt>
> wrote:
>
>> hmmmm, I will try to catch it.
>>
>> I have setup rsyslog to send logs to my undercloud...
>> This is what I received from remote side.
>>
>> it's rebooting after unsuccessful boot, so I cannot get final version in
>> one file...
>>
>> On Sat, 23 Jan 2021 at 00:46, Julia Kreger <juliaashleykreger at gmail.com>
>> wrote:
>>
>>> Umm, wow. That is a new one.
>>>
>>> Any chance you can post or supply the entire ramdisk log that would
>>> have been uploaded to ironic?
>>>
>>> On Fri, Jan 22, 2021 at 3:02 PM Ruslanas Gžibovskis <ruslanas at lpic.lt>
>>> wrote:
>>> >
>>> > Hi all,
>>> >
>>> > I am trying to build some cloud again and failing with [1]. I think
>>> this is a most critical line. It fails during GRUB2 deployment on overcloud
>>> image, I believe main error message is: mount: only root can do that. I
>>> used the following steps to create image:
>>> >
>>> > cp -ar /etc/yum.repos.d repos
>>> > # enable: repos/CentOS-HA.repo
>>> > sed -i "s/enabled=0/enabled=1/g"
>>> repos/CentOS-Linux-HighAvailability.repo
>>> > sed -i "s/gpgcheck=1/gpgcheck=0/g" repos/*repo
>>> > export DIB_YUM_REPO_CONF="$(ls $(pwd)/repos/*repo)"
>>> > export STABLE_RELEASE="ussuri"
>>> > source /home/stack/stackrc
>>> > mkdir /home/stack/images
>>> > cd /home/stack/images
>>> > openstack overcloud image build --config-file
>>> /home/stack/overcloud-images-python3.yaml
>>> > openstack overcloud image upload --update-existing
>>> > # openstack overcloud node configure --all-manageable
>>> >
>>> > overcloud-images-python3.yaml file content can be found here [2], just
>>> added additional packages, such as tcpdump, iperf, iptraf and so on...
>>> > And steps from link [3] to set root pass to troubleshoot if needed.
>>> >
>>> > any thoughts? Maybe there were some changes recently (from 22 of
>>> December) PRevious images from there. Thank you for your thoughts and
>>> attention.
>>> >
>>> > [1] http://paste.openstack.org/show/GDYriAXxQniZTPQGJGbH/
>>> > [2] http://paste.openstack.org/show/2tkVFdwSZ0QMjoJKmOrm/
>>> > [3]
>>> https://access.redhat.com/documentation/en-us/red_hat_openstack_platform/16.0/html-single/partner_integration/index#qcow_setting_the_root_password
>>> >
>>> >
>>> > --
>>> > Ruslanas Gžibovskis
>>> > +370 6030 7030
>>>
>>
>>
>> --
>> Ruslanas Gžibovskis
>> +370 6030 7030
>>
>
>
> --
> Ruslanas Gžibovskis
> +370 6030 7030
>


-- 
Ruslanas Gžibovskis
+370 6030 7030
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/users/attachments/20210123/131fe41d/attachment.html>