[rdo-users] Error detecting ipaddress of interface

Todd Leishman toddleish at gmail.com
Thu Jul 11 20:58:08 UTC 2019


Thank you for responding.

I installed Stein.

Packstack version says 14.0.0, but I'm not sure how to determine RDO
version.



Here's the output of ip a:

[root at shp-vmc-00-man ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
    link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
    link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
4: ens2f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovs-system state UP group default qlen 1000
    link/ether 3c:fd:fe:c5:82:60 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::3efd:feff:fec5:8260/64 scope link
       valid_lft forever preferred_lft forever
5: eno3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
    link/ether f4:03:43:43:c1:1e brd ff:ff:ff:ff:ff:ff
6: ens2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
    link/ether 3c:fd:fe:c5:82:61 brd ff:ff:ff:ff:ff:ff
    inet 10.57.37.123/24 brd 10.57.37.255 scope global ens2f1
       valid_lft forever preferred_lft forever
    inet6 fe80::3efd:feff:fec5:8261/64 scope link
       valid_lft forever preferred_lft forever
7: eno4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
    link/ether f4:03:43:43:c1:1f brd ff:ff:ff:ff:ff:ff
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
    link/ether f4:03:43:43:c1:1c brd ff:ff:ff:ff:ff:ff
    inet 10.57.38.123/24 brd 10.57.38.255 scope global bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::f603:43ff:fe43:c11c/64 scope link
       valid_lft forever preferred_lft forever
11: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether b6:0f:96:16:31:4e brd ff:ff:ff:ff:ff:ff
13: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 6e:e9:0e:c6:42:48 brd ff:ff:ff:ff:ff:ff
14: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc
noqueue master ovs-system state UNKNOWN group default qlen 1000
    link/ether d6:7e:75:80:f9:ce brd ff:ff:ff:ff:ff:ff
    inet6 fe80::d47e:75ff:fe80:f9ce/64 scope link
       valid_lft forever preferred_lft forever
17: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN group default qlen 1000
    link/ether 3c:fd:fe:c5:82:60 brd ff:ff:ff:ff:ff:ff
    inet 10.57.36.217/24 brd 10.57.36.255 scope global br-ex
       valid_lft forever preferred_lft forever
    inet6 fe80::6ccc:80ff:fe30:b541/64 scope link
       valid_lft forever preferred_lft forever



Best Regards,

Todd

On Thu, Jul 11, 2019 at 7:35 AM Alfredo Moralejo Alonso <amoralej at redhat.com>
wrote:

> Hi,
>
> What version of RDO and packstack are you using?, could you provide the
> output of command "ip a"?
>
> Best regards,
>
> Alfredo
>
>
> On Mon, Jul 8, 2019 at 11:43 PM Todd Leishman <toddleish at gmail.com> wrote:
>
>> Hello,
>> I am attempting to use Packstack with an answer file to install Openstack
>> on two nodes -- a controller/network node and a compute node.  I installed
>> Packstack new today.
>>
>> When I run packstack with the answer file, it gets to the step:
>> "Preparing Neutron API entries" and then errors out.  The error reads:
>> ERROR : "Couldn't detect ipaddress of interface ens2f1 on node 10.57.38.123"
>>
>> The controller node management IP is 10.57.38.123 (on bond0).  I am
>> trying to use ens2f1 for the OVN tunnel.  It's IP address is 10.57.37.123.
>>
>> Attached are my answer file and the setup log with failure.
>>
>> Any ideas on what could be wrong?
>>
>> Thanks,
>>
>> --
>>
>> Todd Leishman
>>
>> toddleish at gmail.com
>> _______________________________________________
>> users mailing list
>> users at lists.rdoproject.org
>> http://lists.rdoproject.org/mailman/listinfo/users
>>
>> To unsubscribe: users-unsubscribe at lists.rdoproject.org
>>
> _______________________________________________
> users mailing list
> users at lists.rdoproject.org
> http://lists.rdoproject.org/mailman/listinfo/users
>
> To unsubscribe: users-unsubscribe at lists.rdoproject.org
>


-- 

Todd Leishman

toddleish at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/users/attachments/20190711/fc5837f5/attachment.html>


More information about the users mailing list