[rdo-list] What happens to the most recent Ocata trunk tested ( Tripleo QuickStart failure to deploy overcloud ) ?
John Trowbridge
trown at redhat.com
Thu Apr 6 13:43:30 UTC 2017
Hi Boris,
Would need the puppet output to understand what actually failed. It
would be in the `heat deployment-show` output.
-trown
On 04/06/2017 05:38 AM, Boris Derzhavets wrote:
> Original undercloud deployment :-
>
>
> [alan at fedora24wks tripleo-quickstart]$ bash quickstart.sh -R ocata --config config/general_config/pacemaker.yml --nodes config/nodes/3ctlr_1comp_2ceph.yml $VIRTHOST
>
> . . . . . . . .
>
>
> PLAY RECAP *********************************************************************
> 192.168.0.74 : ok=122 changed=47 unreachable=0 failed=0
> localhost : ok=19 changed=8 unreachable=0 failed=0
> undercloud : ok=37 changed=25 unreachable=0 failed=0
>
> Thursday 06 April 2017 11:27:48 +0300 (0:00:01.597) 0:53:12.348 ********
> ===============================================================================
> fetch-images : Get image --------------------------------------------- 1212.92s
> /home/alan/.quickstart/tripleo-quickstart/roles/fetch-images/tasks/fetch.yml:101
> undercloud-deploy : Install the undercloud --------------------------- 1201.84s
> /home/alan/.quickstart/usr/local/share/ansible/roles/undercloud-deploy/tasks/install-undercloud.yml:15
> overcloud-prep-images : Prepare the overcloud images for deploy ------- 142.83s
> /home/alan/.quickstart/usr/local/share/ansible/roles/overcloud-prep-images/tasks/overcloud-prep-images.yml:1
> setup/undercloud : Perform selinux relabel on undercloud image -------- 111.66s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/undercloud/tasks/main.yml:154
> setup/undercloud : Upload undercloud volume to storage pool ------------ 40.60s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/undercloud/tasks/main.yml:257
> overcloud-prep-flavors : Prepare the scripts for overcloud flavors ----- 28.14s
> /home/alan/.quickstart/usr/local/share/ansible/roles/overcloud-prep-flavors/tasks/overcloud-prep-flavors.yml:1
> setup/undercloud : Copy instackenv.json to appliance ------------------- 23.25s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/undercloud/tasks/main.yml:73
> undercloud-deploy : Create the Virtual BMCs ---------------------------- 14.16s
> /home/alan/.quickstart/usr/local/share/ansible/roles/undercloud-deploy/tasks/configure-vbmc.yml:23
> setup/undercloud : Get undercloud vm ip address ------------------------ 12.67s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/undercloud/tasks/main.yml:295
> setup/overcloud : Create overcloud vm storage --------------------------- 7.46s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/overcloud/tasks/main.yml:72
> undercloud-deploy : Start the Virtual BMCs ------------------------------ 7.11s
> /home/alan/.quickstart/usr/local/share/ansible/roles/undercloud-deploy/tasks/configure-vbmc.yml:55
> setup/overcloud : Define overcloud vms ---------------------------------- 7.10s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/overcloud/tasks/main.yml:84
> setup/overcloud : Attach additional blockdevices to overcloud objectstorage VMs --- 7.05s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/overcloud/tasks/main.yml:102
> undercloud-deploy : Create undercloud configuration --------------------- 7.01s
> /home/alan/.quickstart/usr/local/share/ansible/roles/undercloud-deploy/tasks/create-scripts.yml:3
> setup/overcloud : Create additional blockdevice for objectstorage nodes --- 6.79s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/overcloud/tasks/main.yml:94
> undercloud-deploy : Install VirtualBMC package -------------------------- 6.69s
> /home/alan/.quickstart/usr/local/share/ansible/roles/undercloud-deploy/tasks/configure-vbmc.yml:3
> overcloud-prep-flavors : Create overcloud-prep-flavors script ----------- 6.69s
> /home/alan/.quickstart/usr/local/share/ansible/roles/overcloud-prep-flavors/tasks/create-scripts.yml:3
> overcloud-prep-network : Prepare the network-isolation required networks on the undercloud --- 6.51s
> /home/alan/.quickstart/usr/local/share/ansible/roles/overcloud-prep-network/tasks/overcloud-prep-network.yml:1
> teardown/nodes : Delete baremetal vm storage ---------------------------- 6.33s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/teardown/nodes/tasks/main.yml:53
> setup/overcloud : Check if overcloud volumes exist ---------------------- 6.30s
> /home/alan/.quickstart/tripleo-quickstart/roles/libvirt/setup/overcloud/tasks/main.yml:63
> + set +x
> ##################################
> Virtual Environment Setup Complete
> ##################################
>
> Access the undercloud by:
>
> ssh -F /home/alan/.quickstart/ssh.config.ansible undercloud
>
> Follow the documentation in the link below to complete your deployment.
>
> http://ow.ly/c44w304begR
>
> ##################################
> Virtual Environment Setup Complete
> ##################################
>
>
> Overcloud deployment always exists with same error ( failed dependencies ):-
>
> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
>
> 2017-04-06 09:23:05Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5.1]: CREATE_COMPLETE state changed
> 2017-04-06 09:23:23Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5.2]: SIGNAL_IN_PROGRESS Signal: deployment daca20b9-c52e-431f-94e5-bdf75550a849 succeeded
> 2017-04-06 09:23:24Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5.2]: CREATE_COMPLETE state changed
> 2017-04-06 09:25:24Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5.0]: SIGNAL_IN_PROGRESS Signal: deployment e94600ef-baa0-4a1b-a65e-b3d485409084 failed (6)
>
> 2017-04-06 09:25:24Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5.0]:
>
> CREATE_FAILED Error: resources[0]: Deployment to server failed: deploy_status_code : Deployment exited with non-zero status code: 6
> 2017-04-06 09:25:24Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5]: CREATE_FAILED Resource CREATE failed: Error: resources[0]: Deployment to server failed: deploy_status_code : Deployment exited with non-zero status code: 6
> 2017-04-06 09:25:25Z [overcloud.AllNodesDeploySteps.ControllerDeployment_Step5]: CREATE_FAILED Error: resources.ControllerDeployment_Step5.resources[0]: Deployment to server failed: deploy_status_code: Deployment exited with non-zero status code: 6
> 2017-04-06 09:25:25Z [overcloud.AllNodesDeploySteps]: CREATE_FAILED Resource CREATE failed: Error: resources.ControllerDeployment_Step5.resources[0]: Deployment to server failed: deploy_status_code: Deployment exited with non-zero status code: 6
> 2017-04-06 09:25:25Z [overcloud.AllNodesDeploySteps]: CREATE_FAILED Error: resources.AllNodesDeploySteps.resources.ControllerDeployment_Step5.resources[0]: Deployment to server failed: deploy_status_code: Deployment exited with non-zero status code: 6
> 2017-04-06 09:25:26Z [overcloud]: CREATE_FAILED Resource CREATE failed: Error: resources.AllNodesDeploySteps.resources.ControllerDeployment_Step5.resources[0]: Deployment to server failed: deploy_status_code: Deployment exited with non-zero status code: 6
>
> Stack overcloud CREATE_FAILED
>
> Heat Stack create failed.
> + status_code=1
> + grep -q CREATE_COMPLETE
> + openstack stack list
> + openstack stack failures list overcloud
> ++ grep FAILED
> ++ grep 'StructuredDeployment '
> ++ openstack stack resource list --nested-depth 5 overcloud
> ++ cut -d '|' -f3
> + for failed in '$(openstack stack resource list --nested-depth 5 overcloud | grep FAILED |
> grep '\''StructuredDeployment '\'' | cut -d '\''|'\'' -f3)'
> + echo 'heat deployment-show out put for deployment: e94600ef-baa0-4a1b-a65e-b3d485409084'
> + echo '######################################################'
> + heat deployment-show e94600ef-baa0-4a1b-a65e-b3d485409084
> WARNING (shell) "heat deployment-show" is deprecated, please use "openstack software deployment show" instead
> + echo '######################################################'
> + echo 'puppet standard error for deployment: e94600ef-baa0-4a1b-a65e-b3d485409084'
> + echo '######################################################'
> + heat deployment-show e94600ef-baa0-4a1b-a65e-b3d485409084
> + jq -r .output_values.deploy_stderr
> + sed -r 's:\x1B\[[0-9;]*[mK]::g'
> WARNING (shell) "heat deployment-show" is deprecated, please use "openstack software deployment show" instead
> + echo '######################################################'
> + exit 1
>
>
> Running `heat deployment-show e94600ef-baa0-4a1b-a65e-b3d485409084` multiple
>
> times reports "failed dependencies". Issue above is 100% reproducible.
>
>
> Thanks.
>
> Boris.
>
More information about the dev
mailing list