[rdo-list] Baremetal Tripleo stable version?

Sat Jun 4 16:04:19 UTC 2016

Thanks Marius,

I can confirm that it installs fine with 3 controllers + 3 computes after
recreating the stack

Regards

On Sat, Jun 4, 2016 at 4:14 PM, Marius Cornea <marius at remote-lab.net> wrote:

> Hi Pedro,
>
> Scaling out controller nodes is not supported at this moment:
> https://bugzilla.redhat.com/show_bug.cgi?id=1243312
>
> On Sat, Jun 4, 2016 at 5:05 PM, Pedro Sousa <pgsousa at gmail.com> wrote:
> > Hi,
> >
> > some update on scaling the cloud:
> >
> > 1 controller + 1 compute -> 1 controller + 3 computes  OK
> >
> > 1 controller + 3 computes -> 3 controllers + 3 compute FAILS
> >
> > Problem: The new controller nodes are "stuck" in "pscd start", so it
> seems
> > to be a problem joining the pacemaker cluster... Did anyone had this
> > problem?
> >
> > Regards
> >
> >
> >
> >
> >
> >
> > On Sat, Jun 4, 2016 at 1:50 AM, Pedro Sousa <pgsousa at gmail.com> wrote:
> >>
> >> Hi,
> >>
> >> I finally managed to install a baremetal in mitaka with 1 controller +
> 1
> >> compute with network isolation. Thank god :)
> >>
> >> All I did was:
> >>
> >> #yum install centos-release-openstack-mitaka
> >> #sudo yum install python-tripleoclient
> >>
> >> without epel repos.
> >>
> >> Then followed instructions from Redhat Site.
> >>
> >> I downloaded the overcloud images from:
> >>
> http://buildlogs.centos.org/centos/7/cloud/x86_64/tripleo_images/mitaka/delorean/
> >>
> >> I do have an issue that forces me to delete a json file and run
> >> os-refresh-config inside my overcloud nodes other than that it installs
> >> fine.
> >>
> >> Now I'll test with more 2 controllers + 2 computes to have a full HA
> >> deployment.
> >>
> >> If anyone needs help to document this I'll be happy to help.
> >>
> >> Regards,
> >> Pedro Sousa
> >>
> >>
> >> On Fri, Jun 3, 2016 at 8:26 PM, Ronelle Landy <rlandy at redhat.com>
> wrote:
> >>>
> >>> The report says: "Fix Released" as of 2016-05-24.
> >>> Are you installing on a clean system with the latest repositories?
> >>>
> >>> Might also want to check your version of rabbitmq: I have
> >>> rabbitmq-server-3.6.2-3.el7.noarch on CentOS 7.
> >>>
> >>> ----- Original Message -----
> >>> > From: "Pedro Sousa" <pgsousa at gmail.com>
> >>> > To: "Ronelle Landy" <rlandy at redhat.com>
> >>> > Cc: "Christopher Brown" <cbrown2 at ocf.co.uk>, "Ignacio Bravo"
> >>> > <ibravo at ltgfederal.com>, "rdo-list"
> >>> > <rdo-list at redhat.com>
> >>> > Sent: Friday, June 3, 2016 1:20:43 PM
> >>> > Subject: Re: [rdo-list] Baremetal Tripleo stable version?
> >>> >
> >>> > Anyway to workaround this? Maybe downgrade hiera?
> >>> >
> >>> > On Fri, Jun 3, 2016 at 5:55 PM, Ronelle Landy <rlandy at redhat.com>
> >>> > wrote:
> >>> >
> >>> > > I am not sure exactly where you installed from, and when you did
> your
> >>> > > installation, but any chance, you've hit:
> >>> > > https://bugs.launchpad.net/tripleo/+bug/1584892?
> >>> > > There is a link bugzilla record.
> >>> > >
> >>> > > ----- Original Message -----
> >>> > > > From: "Pedro Sousa" <pgsousa at gmail.com>
> >>> > > > To: "Ronelle Landy" <rlandy at redhat.com>
> >>> > > > Cc: "Christopher Brown" <cbrown2 at ocf.co.uk>, "Ignacio Bravo" <
> >>> > > ibravo at ltgfederal.com>, "rdo-list"
> >>> > > > <rdo-list at redhat.com>
> >>> > > > Sent: Friday, June 3, 2016 12:26:58 PM
> >>> > > > Subject: Re: [rdo-list] Baremetal Tripleo stable version?
> >>> > > >
> >>> > > > Thanks Ronelle,
> >>> > > >
> >>> > > > do you think this kind of errors can be related with network
> >>> > > > settings?
> >>> > > >
> >>> > > > "Could not retrieve fact='rabbitmq_nodename',
> >>> > > > resolution='<anonymous>':
> >>> > > > undefined method `[]' for nil:NilClass Could not retrieve
> >>> > > > fact='rabbitmq_nodename', resolution='<anonymous>': undefined
> >>> > > > method `[]'
> >>> > > > for nil:NilClass"
> >>> > > >
> >>> > > > On Fri, Jun 3, 2016 at 4:56 PM, Ronelle Landy <rlandy at redhat.com
> >
> >>> > > > wrote:
> >>> > > >
> >>> > > > > Hi Pedro,
> >>> > > > >
> >>> > > > > You could use the docs you referred to.
> >>> > > > > Alternatively, if you want to use a vm for the undercloud and
> >>> > > > > baremetal
> >>> > > > > machines for the overcloud, it is possible to use Tripleo
> >>> > > > > Qucikstart
> >>> > > with a
> >>> > > > > few modifications.
> >>> > > > > https://bugs.launchpad.net/tripleo-quickstart/+bug/1571028.
> >>> > > > >
> >>> > > > > ----- Original Message -----
> >>> > > > > > From: "Pedro Sousa" <pgsousa at gmail.com>
> >>> > > > > > To: "Ronelle Landy" <rlandy at redhat.com>
> >>> > > > > > Cc: "Christopher Brown" <cbrown2 at ocf.co.uk>, "Ignacio
> Bravo" <
> >>> > > > > ibravo at ltgfederal.com>, "rdo-list"
> >>> > > > > > <rdo-list at redhat.com>
> >>> > > > > > Sent: Friday, June 3, 2016 11:48:38 AM
> >>> > > > > > Subject: Re: [rdo-list] Baremetal Tripleo stable version?
> >>> > > > > >
> >>> > > > > > Hi Ronelle,
> >>> > > > > >
> >>> > > > > > maybe I understand it wrong but I thought that Tripleo
> >>> > > > > > Quickstart
> >>> > > was for
> >>> > > > > > deploying virtual environments?
> >>> > > > > >
> >>> > > > > > And for baremetal we should use
> >>> > > > > >
> >>> > > > >
> >>> > >
> >>> > >
> http://docs.openstack.org/developer/tripleo-docs/installation/installation.html
> >>> > > > > > ?
> >>> > > > > >
> >>> > > > > > Thanks
> >>> > > > > >
> >>> > > > > >
> >>> > > > > >
> >>> > > > > >
> >>> > > > > >
> >>> > > > > > On Fri, Jun 3, 2016 at 4:43 PM, Ronelle Landy
> >>> > > > > > <rlandy at redhat.com>
> >>> > > wrote:
> >>> > > > > >
> >>> > > > > > > Hello,
> >>> > > > > > >
> >>> > > > > > > We have had success deploying RDO (Mitaka) on baremetal
> >>> > > > > > > systems -
> >>> > > using
> >>> > > > > > > Tripleo Quickstart with both single-nic-vlans and
> >>> > > > > > > bond-with-vlans
> >>> > > > > network
> >>> > > > > > > isolation configurations.
> >>> > > > > > >
> >>> > > > > > > Baremetal can have some complicated networking issues but,
> >>> > > > > > > from
> >>> > > > > previous
> >>> > > > > > > experiences, if a single-controller deployment worked but a
> >>> > > > > > > HA
> >>> > > > > deployment
> >>> > > > > > > did not, I would check:
> >>> > > > > > >  - does the HA deployment command include: -e
> >>> > > > > > >
> >>> > > > >
> >>> > >
> >>> > >
> /usr/share/openstack-tripleo-heat-templates/environments/puppet-pacemaker.yaml
> >>> > > > > > >  - are there possible MTU issues?
> >>> > > > > > >
> >>> > > > > > >
> >>> > > > > > > ----- Original Message -----
> >>> > > > > > > > From: "Christopher Brown" <cbrown2 at ocf.co.uk>
> >>> > > > > > > > To: pgsousa at gmail.com, ibravo at ltgfederal.com
> >>> > > > > > > > Cc: rdo-list at redhat.com
> >>> > > > > > > > Sent: Friday, June 3, 2016 10:29:39 AM
> >>> > > > > > > > Subject: Re: [rdo-list] Baremetal Tripleo stable version?
> >>> > > > > > > >
> >>> > > > > > > > Hello Ignacio,
> >>> > > > > > > >
> >>> > > > > > > > Thanks for your response and good to know it isn't just
> me!
> >>> > > > > > > >
> >>> > > > > > > > I would be more than happy to provide developers with
> >>> > > > > > > > access to
> >>> > > our
> >>> > > > > > > > bare metal environments. I'll also file some bugzilla
> >>> > > > > > > > reports to
> >>> > > see
> >>> > > > > if
> >>> > > > > > > > this generates any interest.
> >>> > > > > > > >
> >>> > > > > > > > Please do let me know if you make any progress - I am
> >>> > > > > > > > trying to
> >>> > > > > deploy
> >>> > > > > > > > HA with network isolation, multiple nics and vlans.
> >>> > > > > > > >
> >>> > > > > > > > The RDO web page states:
> >>> > > > > > > >
> >>> > > > > > > > "If you want to create a production-ready cloud, you'll
> >>> > > > > > > > want to
> >>> > > use
> >>> > > > > the
> >>> > > > > > > > TripleO quickstart guide."
> >>> > > > > > > >
> >>> > > > > > > > which is a contradiction in terms really.
> >>> > > > > > > >
> >>> > > > > > > > Cheers
> >>> > > > > > > >
> >>> > > > > > > > On Fri, 2016-06-03 at 14:30 +0100, Ignacio Bravo wrote:
> >>> > > > > > > > > Pedro / Christopher,
> >>> > > > > > > > >
> >>> > > > > > > > > Just wanted to share with you that I also had plenty of
> >>> > > > > > > > > issues
> >>> > > > > > > > > deploying on bare metal HA servers, and have paused the
> >>> > > deployment
> >>> > > > > > > > > using TripleO until better winds start to flow here. I
> >>> > > > > > > > > was
> >>> > > able to
> >>> > > > > > > > > deploy the QuickStart, but on bare metal the history
> was
> >>> > > different.
> >>> > > > > > > > > Couldn't even deploy a two server configuration.
> >>> > > > > > > > >
> >>> > > > > > > > > I was thinking that it would be good to have the
> >>> > > > > > > > > developers
> >>> > > have
> >>> > > > > > > > > access to one of our environments and go through a full
> >>> > > > > > > > > install
> >>> > > > > with
> >>> > > > > > > > > us to better see where things fail. We can do this
> >>> > > > > > > > > handholding
> >>> > > > > > > > > deployment once every week/month based on developers
> time
> >>> > > > > > > > > availability. That way we can get a working install,
> and
> >>> > > > > > > > > we can
> >>> > > > > > > > > troubleshoot real life environment problems.
> >>> > > > > > > > >
> >>> > > > > > > > >
> >>> > > > > > > > > IB
> >>> > > > > > > > >
> >>> > > > > > > > > On Jun 3, 2016, at 6:15 AM, Pedro Sousa
> >>> > > > > > > > > <pgsousa at gmail.com>
> >>> > > wrote:
> >>> > > > > > > > >
> >>> > > > > > > > > > Yes. I've used this, but I'll try again as there's
> >>> > > > > > > > > > seems to
> >>> > > be
> >>> > > > > new
> >>> > > > > > > > > > updates.
> >>> > > > > > > > > >
> >>> > > > > > > > > >
> >>> > > > > > > > > >
> >>> > > > > > > > > > Stable Branch Skip all repos mentioned above, other
> >>> > > > > > > > > > than
> >>> > > epel-
> >>> > > > > > > > > > release which is still required.
> >>> > > > > > > > > > Enable latest RDO Stable Delorean repository for all
> >>> > > > > > > > > > packages
> >>> > > > > > > > > > sudo curl -o /etc/yum.repos.d/delorean-liberty.repo
> >>> > > > > https://trunk.r
> >>> > > > > > > > > > doproject.org/centos7-liberty/current/delorean.repo
> >>> > > > > > > > > > Enable the Delorean Deps repository
> >>> > > > > > > > > > sudo curl -o
> >>> > > > > > > > > > /etc/yum.repos.d/delorean-deps-liberty.repo
> >>> > > > > http://tru
> >>> > > > > > > > > > nk.rdoproject.org/centos7-liberty/delorean-deps.repo
> >>> > > > > > > > > >
> >>> > > > > > > > > > On Fri, Jun 3, 2016 at 11:10 AM, Christopher Brown <
> >>> > > > > cbrown2 at ocf.co.
> >>> > > > > > > > > > uk> wrote:
> >>> > > > > > > > > > > No, Liberty deployed ok for us.
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > It suggests to me a package mismatch. Have you
> >>> > > > > > > > > > > completely
> >>> > > > > rebuilt
> >>> > > > > > > > > > > the
> >>> > > > > > > > > > > undercloud and then the images using Liberty?
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > On Fri, 2016-06-03 at 11:04 +0100, Pedro Sousa
> wrote:
> >>> > > > > > > > > > > > AttributeError: 'module' object has no attribute
> >>> > > 'PortOpt'
> >>> > > > > > > > > > > --
> >>> > > > > > > > > > > Regards,
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Christopher Brown
> >>> > > > > > > > > > > OpenStack Engineer
> >>> > > > > > > > > > > OCF plc
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Tel: +44 (0)114 257 2200
> >>> > > > > > > > > > > Web: www.ocf.co.uk
> >>> > > > > > > > > > > Blog: blog.ocf.co.uk
> >>> > > > > > > > > > > Twitter: @ocfplc
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > Please note, any emails relating to an OCF Support
> >>> > > > > > > > > > > request
> >>> > > must
> >>> > > > > > > > > > > always
> >>> > > > > > > > > > > be sent to support at ocf.co.uk for a ticket number
> to
> >>> > > > > > > > > > > be
> >>> > > > > generated
> >>> > > > > > > > > > > or
> >>> > > > > > > > > > > existing support ticket to be updated. Should this
> >>> > > > > > > > > > > not be
> >>> > > done
> >>> > > > > > > > > > > then OCF
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > cannot be held responsible for requests not dealt
> >>> > > > > > > > > > > with in a
> >>> > > > > > > > > > > timely
> >>> > > > > > > > > > > manner.
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > OCF plc is a company registered in England and
> Wales.
> >>> > > > > Registered
> >>> > > > > > > > > > > number
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > 4132533, VAT number GB 780 6803 14. Registered
> office
> >>> > > address:
> >>> > > > > > > > > > > OCF plc,
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > 5 Rotunda Business Centre, Thorncliffe Park,
> >>> > > > > > > > > > > Chapeltown,
> >>> > > > > > > > > > > Sheffield S35
> >>> > > > > > > > > > > 2PG.
> >>> > > > > > > > > > >
> >>> > > > > > > > > > > If you have received this message in error, please
> >>> > > > > > > > > > > notify
> >>> > > us
> >>> > > > > > > > > > > immediately and remove it from your system.
> >>> > > > > > > > > > >
> >>> > > > > > > > >
> >>> > > > > > > > > _______________________________________________
> >>> > > > > > > > > rdo-list mailing list
> >>> > > > > > > > > rdo-list at redhat.com
> >>> > > > > > > > > https://www.redhat.com/mailman/listinfo/rdo-list
> >>> > > > > > > > >
> >>> > > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> >>> > > > > > > > --
> >>> > > > > > > > Regards,
> >>> > > > > > > >
> >>> > > > > > > > Christopher Brown
> >>> > > > > > > > OpenStack Engineer
> >>> > > > > > > > OCF plc
> >>> > > > > > > >
> >>> > > > > > > > Tel: +44 (0)114 257 2200
> >>> > > > > > > > Web: www.ocf.co.uk
> >>> > > > > > > > Blog: blog.ocf.co.uk
> >>> > > > > > > > Twitter: @ocfplc
> >>> > > > > > > >
> >>> > > > > > > > Please note, any emails relating to an OCF Support
> request
> >>> > > > > > > > must
> >>> > > > > always
> >>> > > > > > > > be sent to support at ocf.co.uk for a ticket number to be
> >>> > > generated or
> >>> > > > > > > > existing support ticket to be updated. Should this not be
> >>> > > > > > > > done
> >>> > > then
> >>> > > > > OCF
> >>> > > > > > > >
> >>> > > > > > > > cannot be held responsible for requests not dealt with
> in a
> >>> > > timely
> >>> > > > > > > > manner.
> >>> > > > > > > >
> >>> > > > > > > > OCF plc is a company registered in England and Wales.
> >>> > > > > > > > Registered
> >>> > > > > number
> >>> > > > > > > >
> >>> > > > > > > > 4132533, VAT number GB 780 6803 14. Registered office
> >>> > > > > > > > address:
> >>> > > OCF
> >>> > > > > plc,
> >>> > > > > > > >
> >>> > > > > > > > 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown,
> >>> > > Sheffield
> >>> > > > > S35
> >>> > > > > > > > 2PG.
> >>> > > > > > > >
> >>> > > > > > > > If you have received this message in error, please notify
> >>> > > > > > > > us
> >>> > > > > > > > immediately and remove it from your system.
> >>> > > > > > > >
> >>> > > > > > > > _______________________________________________
> >>> > > > > > > > rdo-list mailing list
> >>> > > > > > > > rdo-list at redhat.com
> >>> > > > > > > > https://www.redhat.com/mailman/listinfo/rdo-list
> >>> > > > > > > >
> >>> > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> >>> > > > > > > >
> >>> > > > > > >
> >>> > > > > >
> >>> > > > >
> >>> > > >
> >>> > >
> >>> >
> >>
> >>
> >
> >
> > _______________________________________________
> > rdo-list mailing list
> > rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20160604/2881d472/attachment.html>