[rdo-list] Overcloud Deployment failsm not br-int
Bob Fournier
bfournie at redhat.com
Sun Jul 31 18:17:50 UTC 2016
----- Original Message -----
> From: "Gabriel Peral" <gbrlperal at gmail.com>
> To: "Bob Fournier" <bfournie at redhat.com>
> Sent: Sunday, July 31, 2016 1:39:05 PM
> Subject: Re: [rdo-list] Overcloud Deployment failsm not br-int
>
> Hi everyone,
>
> All seems to be okay,
> *@Marius Cornea -->* Iptables are not blocking any access but still cannot
> curl the http://169.254.169.254
> *@Bob Fournier --> *my templates are almost like yours, I will attach them
> and so you can take a look, maybe I am missing something
>
> Is very weird cause all the vlans are defined in a pyhiscal switch, and the
> PXE+DHCP vlan is the only one which is native, the others are in trunk mode
> (include the External)
>
> Thank you all for the help!!
>
> Regards,
>
> Gabriel
Thanks Gabriel. Is the deployment working OK now? If your still having problems
there were a couple things I noticed in the yaml files that you sent.
(Note, your last response seems like it was intended for the list but not sure if list
was included).
Can you try using dhcp for the vlan networks, so removing this line in your controller
and compute yams?
type: ovs_bridge
name: {get_input: bridge_name}
use_dhcp: false <==== remove
You have 2 extra interfaces in your controller and compute yaml files. Not sure what
these are used for but they should be removed.
type: interface
name: enp9s0
use_dhcp: false
defroute: false
-
type: interface
name: enp10s0
use_dhcp: false
defroute: false
Can you make sure that your custom controller and compute yaml files are located at these locations?
(I'm not saying they aren't, but its a common problem I have made :-) )
OS::TripleO::Compute::Net::SoftwareConfig: /home/stack/templates/my-overcloud/network/config/single-nic\
-vlans/compute.yaml
OS::TripleO::Controller::Net::SoftwareConfig: /home/stack/templates/my-overcloud/network/config/single-\
nic-vlans/controller.yaml
It would also be useful to send the deploy command you are using if you are still having problems.
Thanks,
Bob
>
> 2016-07-31 18:24 GMT+02:00 Bob Fournier <bfournie at redhat.com>:
>
> >
> > ----- Original Message -----
> > > From: "Bob Fournier" <bfournie at redhat.com>
> > > To: "Christopher Brown" <cbrown2 at ocf.co.uk>
> > > Cc: rdo-list at redhat.com
> > > Sent: Sunday, July 31, 2016 11:26:20 AM
> > > Subject: Re: [rdo-list] Overcloud Deployment failsm not br-int
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Christopher Brown" <cbrown2 at ocf.co.uk>
> > > > To: "Gabriel Peral" <gbrlperal at gmail.com>, rdo-list at redhat.com
> > > > Sent: Sunday, July 31, 2016 8:49:18 AM
> > > > Subject: Re: [rdo-list] Overcloud Deployment failsm not br-int
> > > >
> > > > Hi Gabriel,
> > > >
> > > > Any reason you are trying to install such an old version? Kilo is no
> > longer
> > > > supported and the repository has been archived.
> > > >
> > > > I'd recommend trying again with Liberty or perhaps Mitaka first.
> > > >
> > > > Regards,
> > > >
> > > > Christopher Brown
> > > > OpenStack Engineer
> > > > OCF plc
> > > >
> > > > Tel: +44 (0)114 257 2200
> > > > Web: www.ocf.co.uk
> > > > Blog: blog.ocf.co.uk
> > > > Twitter: @ocfplc
> > > >
> > > > OCF plc is a company registered in England and Wales. Registered number
> > > > 4132533, VAT number GB 780 6803 14. Registered office address: OCF
> > plc, 5
> > > > Rotunda Business Centre, Thorncliffe Park, Chapeltown, Sheffield, S35
> > 2PG.
> > > >
> > > > This message is private and confidential. If you have received this
> > message
> > > > in error, please notify us and remove it from your system.
> > > >
> > > >
> > >
> > > Gabriel,
> > >
> > > After trying again with a newer version, if you are still having problems
> > > it would be useful if you included the network-environment.yaml
> > > and network-isolation.yaml files in the email. Also, as your
> > > deployment doesn't include storage, it shouldn't be necessary to
> > > include storage-environment.yaml in your deployment command,
> > > i.e. "-e ~/templates/storage-environment.yaml" isn't needed.
> > >
> > > Regards,
> > > Bob Fournier
> >
> > Gabriel,
> >
> > Also, I recently did a baremetal deployment very similar to
> > what you are trying to set up (2 NICs - one NIC for provisioning and one
> > with VLANs for external, api, tenant, and storage networks). I have
> > attached the relevant yaml files that you should be able to use as
> > a reference.
> >
> > Regards,
> > Bob Fournier
> >
> >
> > >
> > > > -------- Original message --------
> > > > From: Gabriel Peral <gbrlperal at gmail.com>
> > > > Date: 31/07/2016 10:16 a.m. (GMT)
> > > > To: rdo-list at redhat.com
> > > > Subject: [rdo-list] Overcloud Deployment failsm not br-int
> > > >
> > > > Hi everyone!
> > > >
> > > > I've been trying to deploy OpenStack using TripleO for 2 weeks and I
> > am get
> > > > stucked in the same step.
> > > >
> > > > But let's see first my environment, 3 baremetal nodes, one will be a
> > > > compute
> > > > node, the other two will be compute nodes. In each pyhiscal node I
> > have two
> > > > pyhiscal NICs, one for the PXE+DHCP provisioning, and the other
> > pyhsical
> > > > NIC
> > > > connected to a pyhiscal switch which has the rest of the vlans for the
> > > > deployment (api, storage, tenant, exeternal, etc). I am deploying
> > OpeStack
> > > > Kilo version.
> > > > The first step of the installation was good, the undercloud and the
> > > > introspection was done in the right way, but the problem cames when I
> > try
> > > > to
> > > > deploy the overcloud, I set up the network-environment.yaml template in
> > > > order to set the vlans to the networks, and the compute.yaml and
> > > > controller.yaml templates to set the right NICs to the right networks.
> > And
> > > > then I launch the deploy command like this (vlan mode) :
> > > >
> > > > $ openstack overcloud deploy --templates ~/templates/my-overcloud/ -e
> > > > ~/templates/network-environment.yaml -e
> > > > ~/templates/storage-environment.yaml
> > > > -e ~/templates/my-overcloud/environments/network-isolation.yaml
> > > > --control-scale 1 --compute-scale 2 --control-flavor control
> > > > --compute-flavor compute --ntp-server 10.20.10.3 --neutron-network-type
> > > > vlan
> > > > --neutron-disable-tunneling --neutron-bridge-mappings datacentre:br-ex
> > > > --neutron-network-vlan-ranges datacentre:30:100 --timeout 60 --verbose
> > > > --log-file overcloud_vlan.log
> > > >
> > > > And all seems go well untill it fails due to timeout, the
> > > >
> > > > heat resource-list --nested-depth 5 overcloud | grep FAILED
> > > >
> > > > Show that something is wrong in the NetworkDeploy, and when I log into
> > the
> > > > controller node, if I type sudo ovs-vsctl list-br it only shows me the
> > > > br-ex
> > > > bridge, so it wasn't able to create the br-int, and I think that's the
> > > > reason because the deployment has been failed, when I've tryied to
> > deploy
> > > > more i log into the controller node, and check the sudo tail -f
> > > > /var/log/messages and this is the only message that appears:
> > > >
> > > >
> > > > Jul 31 04:59:53 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 04:59:53.337 4606 WARNING os-collect-config [-] Source [ec2]
> > Unavailable.
> > > > Jul 31 04:59:53 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 04:59:53.624 4606 WARNING os-collect-config [-] Source [request]
> > > > Unavailable.
> > > > Jul 31 04:59:53 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 04:59:53.625 4606 WARNING os_collect_config.local [-]
> > > > /var/lib/os-collect-config/local-data not found. Skipping
> > > > Jul 31 04:59:53 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 04:59:53.625 4606 WARNING os_collect_config.local [-] No local metadata
> > > > found (['/var/lib/os-collect-config/local-data'])
> > > > Jul 31 05:00:26 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 05:00:26.615 4606 WARNING os_collect_config.ec2 [-] ('Connection
> > aborted.',
> > > > error(113, 'No route to host'))
> > > > Jul 31 05:00:26 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 05:00:26.615 4606 WARNING os-collect-config [-] Source [ec2]
> > Unavailable.
> > > > Jul 31 05:00:26 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 05:00:26.833 4606 WARNING os-collect-config [-] Source [request]
> > > > Unavailable.
> > > > Jul 31 05:00:26 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 05:00:26.833 4606 WARNING os_collect_config.local [-]
> > > > /var/lib/os-collect-config/local-data not found. Skipping
> > > > Jul 31 05:00:26 overcloud-controller-0 os-collect-config: 2016-07-31
> > > > 05:00:26.834 4606 WARNING os_collect_config.local [-] No local metadata
> > > > found (['/var/lib/os-collect-config/local-data' ])
> > > >
> > > > So something is wrong with the network, but I don't know what because
> > I can
> > > > ping the external network and gateway from the controller node.
> > > >
> > > > If someone knows what could be I would be so glad, because I've been
> > trying
> > > > to deploy and all the times it fails
> > > >
> > > > Kind regards,
> > > >
> > > > Gabriel
> > > >
> > > > _______________________________________________
> > > > rdo-list mailing list
> > > > rdo-list at redhat.com
> > > > https://www.redhat.com/mailman/listinfo/rdo-list
> > > >
> > > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > >
> > > _______________________________________________
> > > rdo-list mailing list
> > > rdo-list at redhat.com
> > > https://www.redhat.com/mailman/listinfo/rdo-list
> > >
> > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > >
> >
>
More information about the dev
mailing list