[Rdo-list] Fwd: [apex] RC1 now available

Rich Bowen rbowen at redhat.com
Mon Jan 25 14:53:17 UTC 2016 

Congratulations on this release!

On 01/23/2016 01:53 PM, Dan Radez wrote:
> Hello RDO,
> As leaked earlier: Here is our announcement for OPNFV Apex Brahmaputra RC1.
> 
> OPNFV Apex uses RDO Manager and RDO under the covers to deploy an NFV
> platform. We launch a Virtual instack on a jump host and then deploy
> either virtual on the same jumphost or a baremetal overcloud.
> 
> Documentation can be found here:
> http://artifacts.opnfv.org/apex/docs/installation-instructions/
> 
> Contact us via freenode in #opnfv-apex or on the opnfv users or tech
> mailing lists.
> opnfv-tech-discuss at lists.opnfv.org
> opnfv-users at lists.opnfv.org
> 
> Dan
> 
> 
> -------- Forwarded Message --------
> Subject: [apex] RC1 now available
> Date: Sat, 23 Jan 2016 11:57:57 -0500 (EST)
> From: Tim Rozet <trozet at redhat.com>
> To: Debra Scott <dscott at linuxfoundation.org>
> CC: opnfv-tech-discuss at lists.opnfv.org, Dan Radez <dradez at redhat.com>,
> Michael Chapman <michapma at redhat.com>, Dave Neary <dneary at redhat.com>,
> Chris Wright <chrisw at redhat.com>, Alvaro Lopez Ortega <aortega at redhat.com>
> 
> Hello,
> I am pleased to announce that we have released another candidate build
> for Brahmaputra:
> artifacts.opnfv.org
> apex/brahmaputra/opnfv-apex-2.1-brahmaputra.1.rc1.noarch.rpm
> apex/brahmaputra/opnfv-apex-common-2.1-brahmaputra.1.rc1.noarch.rpm
> apex/brahmaputra/opnfv-apex-opendaylight-sfc-2.1-brahmaputra.1.rc1.noarch.rpm
> 
> apex/brahmaputra/opnfv-apex-undercloud-2.1-brahmaputra.1.rc1.noarch.rpm
> apex/brahmaputra/opnfv-brahmaputra.1.rc1.iso
> 
> This candidate build includes support for:
> - OpenStack HA Liberty
> - OpenDaylight Lithium 3.3 with L2 and L3 plugin deployment scenarios
> - ONOS
> - SFC (NSH OVS with OpenDaylight Beryllium)
> - Ceilometer Aodh support for Doctor
> 
> Several bug fixes have gone in as well, and thanks to Functest team and
> others in the community for testing out RC0 for us and finding these
> issues.  Virtual deployments in our CI environment take as little as 32
> minutes, and bare metal takes about 43 minutes to deploy a 5
> controller/compute HA deployment.
> 
> Huge thanks to Dan and Michael for their hard work and sacrificing their
> nights and weekends to get us this far!
> 
> Tim Rozet
> Red Hat SDN Team
> 
> ----- Original Message -----
> From: "Tim Rozet" <trozet at redhat.com>
> To: "Debra Scott" <dscott at linuxfoundation.org>
> Cc: opnfv-tech-discuss at lists.opnfv.org
> Sent: Thursday, January 21, 2016 1:57:26 AM
> Subject: Re: [opnfv-tech-discuss] [apex] RC1 readiness/status report
> 
> Hi Debra,
> Latest status.
> 
> Progress since last update:
> 1.  Michael has gotten AODH to work locally in his build environment and
> submitted a patch to OPNFV.  We should then have support for Doctor:
> https://gerrit.opnfv.org/gerrit/#/c/7455/
> 2.  We have  patch in gerrit to support SFC (ODL Be, NSH OVS, Kernel
> Upgrade to 3.13): https://gerrit.opnfv.org/gerrit/#/c/7497/
> 3.  ODL L3 has deployed on baremetal, and is now added to our Jenkins
> verify.
> 4.  We have fixed 2 bugs that were causing failures in functest:
> https://jira.opnfv.org/browse/APEX-61,
> https://jira.opnfv.org/browse/APEX-59 (thanks Jose for debugging them
> with me)
> 
> TODO:
> 1.  Dan is working on OpenContrail integration.
> 3.  Functest is broken.  Would like to get good functest results on our
> daily before we build RC1.
> 4.  Yardstick was integrated into Apex, but is failing during run.  Will
> debug that with Yardstick team.
> 5.  Docs
> 
> Thanks,
> 
> Tim Rozet
> Red Hat SDN Team
> 
> ----- Original Message -----
> From: "Tim Rozet" <trozet at redhat.com>
> To: "Debra Scott" <dscott at linuxfoundation.org>
> Cc: opnfv-tech-discuss at lists.opnfv.org, "Dan Radez" <dradez at redhat.com>,
> "Michael Chapman" <michapma at redhat.com>, "zhoubo (X)"
> <bob.zh at huawei.com>, "Chris Wright" <chrisw at redhat.com>
> Sent: Monday, January 18, 2016 12:51:26 AM
> Subject: Re: [opnfv-tech-discuss] [apex] RC1 readiness/status report
> 
> Hi Debra,
> I have not heard what officially RC1 is supposed to contain, but for us
> we will build another candidate sometime within the next few days.
> 
> Progress since last update:
> 1.  Awesome work by Dan and Michael to get the RPM split done, our RPMs
> are now split into 3:
> apex/opnfv-apex-2.1-20160117.noarch.rpm
> apex/opnfv-apex-common-2.1-20160117.noarch.rpm
> apex/opnfv-apex-undercloud-2.1-20160117.noarch.rpm
> 2.  ONOS code is fully merged and works in virtual deployments
> (baremetal and functest results pending) - thanks Bob and ONOS team for
> all the help integrating
> 3.  Scenarios were all added Friday to Apex Jenkins:
> https://build.opnfv.org/ci/view/apex/ (ONOS and ODL L2 are now part of
> our CI verify and daily)
> 4.  ODL L3 patch has been pushed and passed initial round of CI:
> https://gerrit.opnfv.org/gerrit/#/c/6995/6
> 
> TODO:
> 1.  Dan is working on OpenContrail integration.
> 2.  Michael is working on getting AODH support for Doctor into Apex.
> Patch WIP: https://gerrit.opnfv.org/gerrit/#/c/6631/
> 3.  I'm working on getting SFC support.  Plan is to build Apex RPM with
> Be version of ODL included, and I'm writing up some ansible modules to
> update kernel, install NSH OVS, and Tacker.
> 4.  Yardstick was integrated into Apex, but is failing during run.  Will
> debug that with Yardstick team.
> 
> For our RC1 build my goal is to include ONOS and ODL L3.  As soon as we
> feel those are both stable, with good functest results, we will build RC1.
> 
> Thanks,
> 
> Tim Rozet
> Red Hat SDN Team
> 
> ----- Original Message -----
> From: "Tim Rozet" <trozet at redhat.com>
> To: "Debra Scott" <dscott at linuxfoundation.org>
> Cc: opnfv-tech-discuss at lists.opnfv.org, "Dan Radez" <dradez at redhat.com>,
> "Michael Chapman" <michapma at redhat.com>, "Sam Hague" <shague at redhat.com>
> Sent: Thursday, January 14, 2016 5:34:10 PM
> Subject: [opnfv-tech-discuss] [apex] RC0 readiness/status report
> 
> Hi Debra,
> Glad to announce we have built an RC0 candidate artifact!  This build
> supports ODL Lithium 3.3, OpenStack Liberty HA, network isolation, Ceph
> in a virtual or baremetal environment.
> 
> http://artifacts.opnfv.org/index.html
> apex/brahmaputra/opnfv-apex-2.7-brahmaputra.1.rc0.noarch.rpm
> apex/brahmaputra/opnfv-apex-2.7-brahmaputra.1.rc0.src.rpm
> apex/brahmaputra/opnfv-brahmaputra.1.rc0.iso
> apex/brahmaputra/opnfv-brahmaputra.1.rc0.properties
> 
> Functest results on artifact:
> Tempest cases: 110 Pass/8 Fail
> ODL cases: 15 Pass/3 Fail
> VPING: 1 Pass/0 Fail
> Rally: 6 Pass/2 Fail
> VIMS: Aborted
> 
> Functest caught a bug for us that we will fix post RC0:
> https://jira.opnfv.org/browse/APEX-59, which also caused VIMS to abort.
> 
> TODO looking past RC0:
> 1.  Found an issue where ONOS build artifact was not being included in
> our build.  Patch currently up to fix that. (Waiting on #2)
> 2.  However, because of #1, our artifact (rpm) size grows over 4GB which
> is the limit of cpio, and breaks the rpm build.  Dan is working on
> splitting our rpm into separate rpms which will fix this problem. Patch
> currently being tested: https://gerrit.opnfv.org/gerrit/#/c/6227/
> 3.  Test ONOS and make sure it works with our integration. (Depends on
> #1, #2)
> 4.  Dan was able to get OpenContrail to build as an RPM.  Stuart has
> provided us configuration info.  Next step is to see if the RPM works
> and if we can install/configure OpenContrail.
> 5.  Michael is working on getting AODH support for Doctor into Apex.
> Patch WIP: https://gerrit.opnfv.org/gerrit/#/c/6631/
> 6.  I'm working on getting SFC support.  Plan is to build Apex RPM with
> Be version of ODL included, and I'm writing up some ansible modules to
> update kernel, install NSH OVS, and Tacker.
> 7.  Yardstick was integrated into Apex, but is failing to run.  Will
> debug that with Yardstick team.
> 
> Thanks,
> 
> Tim Rozet
> Red Hat SDN Team
> 
> ----- Original Message -----
> From: "Tim Rozet" <trozet at redhat.com>
> To: "Debra Scott" <dscott at linuxfoundation.org>
> Cc: opnfv-tech-discuss at lists.opnfv.org
> Sent: Wednesday, January 13, 2016 8:27:45 AM
> Subject: Re: [opnfv-tech-discuss] [apex] RC0 readiness/status report
> 
> Hi Debra,
> Will be late again today so here is current status:
> Accomplishments since Monday:
> 1.  Ceph is working and merged.
> 2.  Network isolation is fully working (admin, private, public, storage
> networks created and used in deployment).
> 3.  Was able to get functest to run with 118 pass/27 fail (Thanks Jose
> and Morgan for the help).  There was a slight error in functest where
> some of our keystone users got deleted, so I am hoping on the next run
> there will be more passes:
> http://213.77.62.197/results?project=functest&case=Tempest&installer=apex
> 
> Current status for RC0:
> I believe all the patches are in place to provide us an RC0 artifact.
> The only remaining issue is functest failed to start again on our daily
> last night, so we need to fix that so we can get a valid artifact.
> 
> TODO for RC0:
> 1.  Fix functest execution in our daily.
> 2.  Merge current master code to stable/b and produce RC0 candidate via
> daily job.
> 
> TODO looking past RC0:
> 1.  Found an issue where ONOS build artifact was not being included in
> our build.  Patch currently up to fix that.
> 2.  However, because of #1, our artifact (rpm) size grows over 4GB which
> is the limit of cpio, and breaks the rpm build.  Dan is working on
> splitting our rpm into separate rpms which will fix this problem.
> 3.  Test ONOS and make sure it works with our integration.
> 4.  Dan was able to get OpenContrail to build as an RPM.  Waiting on
> Stuart for more information on what we need to do to integrate.
> 5.  Michael is working on getting AODH support for Doctor into Apex.
> 6.  I'll work on getting SFC supported.
> 
> Tim Rozet
> Red Hat SDN Team
> 
> ----- Original Message -----
> From: "Tim Rozet" <trozet at redhat.com>
> To: "Debra Scott" <dscott at linuxfoundation.org>
> Cc: "Dan Radez" <dradez at redhat.com>, "Michael Chapman"
> <michapma at redhat.com>, opnfv-tech-discuss at lists.opnfv.org
> Sent: Sunday, January 10, 2016 11:19:40 PM
> Subject: [apex] RC0 readiness/status report
> 
> Hi Debra,
> I will be late to the daily release ops meeting tomorrow, so I wanted to
> relay our status.
> 
> Accomplishments this past week:
> 1.  Upstream artifacts are frozen for B-release, this way we cannot be
> affected anymore by upstream breakage
> 2.  OPNFV Apex CI pipieline is stable now for builds and virtual
> deployments (last 4 builds in a row successful)
> 3.  LF POD1 is up and stable, and we completed our first baremetal
> deployment there today:
> https://build.opnfv.org/ci/view/apex/job/apex-deploy-baremetal-master/12/
> 4.  Our installer now takes deploy, network, and inventory settings as
> separate yaml inputs and parses them correctly
> 5.  ODL Lithium with L2 support is what is currently being deployed in CI
> 6.  ONOS code has been merged into Apex and included in latest artifact
> build
> 
> TODO this week:
> 1.  Get functest executing again on our daily jobs (working on that now)
> 2.  Get Ceph working on controllers and part of our deploy (patch in
> place https://gerrit.opnfv.org/gerrit/#/c/5521/)
> 3.  Create jenkins job to test ONOS
> 4.  Meet with Stuart and figure out how to get OpenContrail support asap
> 
> If we can get #1 and #2 (with good functest results) completed then we
> have an RC0 candidate build.  I am hopeful we can achieve that by EOB
> Monday.
> 
> Thanks,
> 
> Tim Rozet
> Red Hat SDN Team
> _______________________________________________
> opnfv-tech-discuss mailing list
> opnfv-tech-discuss at lists.opnfv.org
> https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss
> _______________________________________________
> opnfv-tech-discuss mailing list
> opnfv-tech-discuss at lists.opnfv.org
> https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss
> 
> 
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
> 
> To unsubscribe: rdo-list-unsubscribe at redhat.com


-- 
Rich Bowen - rbowen at redhat.com
OpenStack Community Liaison
http://rdoproject.org/

More information about the dev mailing list