[Rdo-list] Fwd: [apex] RC1 now available

Dan Radez dradez at redhat.com
Sat Jan 23 18:53:58 UTC 2016


Hello RDO,
As leaked earlier: Here is our announcement for OPNFV Apex Brahmaputra RC1.

OPNFV Apex uses RDO Manager and RDO under the covers to deploy an NFV 
platform. We launch a Virtual instack on a jump host and then deploy 
either virtual on the same jumphost or a baremetal overcloud.

Documentation can be found here:
http://artifacts.opnfv.org/apex/docs/installation-instructions/

Contact us via freenode in #opnfv-apex or on the opnfv users or tech 
mailing lists.
opnfv-tech-discuss at lists.opnfv.org
opnfv-users at lists.opnfv.org

Dan


-------- Forwarded Message --------
Subject: [apex] RC1 now available
Date: Sat, 23 Jan 2016 11:57:57 -0500 (EST)
From: Tim Rozet <trozet at redhat.com>
To: Debra Scott <dscott at linuxfoundation.org>
CC: opnfv-tech-discuss at lists.opnfv.org, Dan Radez <dradez at redhat.com>, 
Michael Chapman <michapma at redhat.com>, Dave Neary <dneary at redhat.com>, 
Chris Wright <chrisw at redhat.com>, Alvaro Lopez Ortega <aortega at redhat.com>

Hello,
I am pleased to announce that we have released another candidate build 
for Brahmaputra:
artifacts.opnfv.org
apex/brahmaputra/opnfv-apex-2.1-brahmaputra.1.rc1.noarch.rpm
apex/brahmaputra/opnfv-apex-common-2.1-brahmaputra.1.rc1.noarch.rpm
apex/brahmaputra/opnfv-apex-opendaylight-sfc-2.1-brahmaputra.1.rc1.noarch.rpm
apex/brahmaputra/opnfv-apex-undercloud-2.1-brahmaputra.1.rc1.noarch.rpm
apex/brahmaputra/opnfv-brahmaputra.1.rc1.iso

This candidate build includes support for:
- OpenStack HA Liberty
- OpenDaylight Lithium 3.3 with L2 and L3 plugin deployment scenarios
- ONOS
- SFC (NSH OVS with OpenDaylight Beryllium)
- Ceilometer Aodh support for Doctor

Several bug fixes have gone in as well, and thanks to Functest team and 
others in the community for testing out RC0 for us and finding these 
issues.  Virtual deployments in our CI environment take as little as 32 
minutes, and bare metal takes about 43 minutes to deploy a 5 
controller/compute HA deployment.

Huge thanks to Dan and Michael for their hard work and sacrificing their 
nights and weekends to get us this far!

Tim Rozet
Red Hat SDN Team

----- Original Message -----
From: "Tim Rozet" <trozet at redhat.com>
To: "Debra Scott" <dscott at linuxfoundation.org>
Cc: opnfv-tech-discuss at lists.opnfv.org
Sent: Thursday, January 21, 2016 1:57:26 AM
Subject: Re: [opnfv-tech-discuss] [apex] RC1 readiness/status report

Hi Debra,
Latest status.

Progress since last update:
1.  Michael has gotten AODH to work locally in his build environment and 
submitted a patch to OPNFV.  We should then have support for Doctor: 
https://gerrit.opnfv.org/gerrit/#/c/7455/
2.  We have  patch in gerrit to support SFC (ODL Be, NSH OVS, Kernel 
Upgrade to 3.13): https://gerrit.opnfv.org/gerrit/#/c/7497/
3.  ODL L3 has deployed on baremetal, and is now added to our Jenkins 
verify.
4.  We have fixed 2 bugs that were causing failures in functest: 
https://jira.opnfv.org/browse/APEX-61, 
https://jira.opnfv.org/browse/APEX-59 (thanks Jose for debugging them 
with me)

TODO:
1.  Dan is working on OpenContrail integration.
3.  Functest is broken.  Would like to get good functest results on our 
daily before we build RC1.
4.  Yardstick was integrated into Apex, but is failing during run.  Will 
debug that with Yardstick team.
5.  Docs

Thanks,

Tim Rozet
Red Hat SDN Team

----- Original Message -----
From: "Tim Rozet" <trozet at redhat.com>
To: "Debra Scott" <dscott at linuxfoundation.org>
Cc: opnfv-tech-discuss at lists.opnfv.org, "Dan Radez" <dradez at redhat.com>, 
"Michael Chapman" <michapma at redhat.com>, "zhoubo (X)" 
<bob.zh at huawei.com>, "Chris Wright" <chrisw at redhat.com>
Sent: Monday, January 18, 2016 12:51:26 AM
Subject: Re: [opnfv-tech-discuss] [apex] RC1 readiness/status report

Hi Debra,
I have not heard what officially RC1 is supposed to contain, but for us 
we will build another candidate sometime within the next few days.

Progress since last update:
1.  Awesome work by Dan and Michael to get the RPM split done, our RPMs 
are now split into 3:
apex/opnfv-apex-2.1-20160117.noarch.rpm
apex/opnfv-apex-common-2.1-20160117.noarch.rpm
apex/opnfv-apex-undercloud-2.1-20160117.noarch.rpm
2.  ONOS code is fully merged and works in virtual deployments 
(baremetal and functest results pending) - thanks Bob and ONOS team for 
all the help integrating
3.  Scenarios were all added Friday to Apex Jenkins: 
https://build.opnfv.org/ci/view/apex/ (ONOS and ODL L2 are now part of 
our CI verify and daily)
4.  ODL L3 patch has been pushed and passed initial round of CI: 
https://gerrit.opnfv.org/gerrit/#/c/6995/6

TODO:
1.  Dan is working on OpenContrail integration.
2.  Michael is working on getting AODH support for Doctor into Apex. 
Patch WIP: https://gerrit.opnfv.org/gerrit/#/c/6631/
3.  I'm working on getting SFC support.  Plan is to build Apex RPM with 
Be version of ODL included, and I'm writing up some ansible modules to 
update kernel, install NSH OVS, and Tacker.
4.  Yardstick was integrated into Apex, but is failing during run.  Will 
debug that with Yardstick team.

For our RC1 build my goal is to include ONOS and ODL L3.  As soon as we 
feel those are both stable, with good functest results, we will build RC1.

Thanks,

Tim Rozet
Red Hat SDN Team

----- Original Message -----
From: "Tim Rozet" <trozet at redhat.com>
To: "Debra Scott" <dscott at linuxfoundation.org>
Cc: opnfv-tech-discuss at lists.opnfv.org, "Dan Radez" <dradez at redhat.com>, 
"Michael Chapman" <michapma at redhat.com>, "Sam Hague" <shague at redhat.com>
Sent: Thursday, January 14, 2016 5:34:10 PM
Subject: [opnfv-tech-discuss] [apex] RC0 readiness/status report

Hi Debra,
Glad to announce we have built an RC0 candidate artifact!  This build 
supports ODL Lithium 3.3, OpenStack Liberty HA, network isolation, Ceph 
in a virtual or baremetal environment.

http://artifacts.opnfv.org/index.html
apex/brahmaputra/opnfv-apex-2.7-brahmaputra.1.rc0.noarch.rpm
apex/brahmaputra/opnfv-apex-2.7-brahmaputra.1.rc0.src.rpm
apex/brahmaputra/opnfv-brahmaputra.1.rc0.iso
apex/brahmaputra/opnfv-brahmaputra.1.rc0.properties

Functest results on artifact:
Tempest cases: 110 Pass/8 Fail
ODL cases: 15 Pass/3 Fail
VPING: 1 Pass/0 Fail
Rally: 6 Pass/2 Fail
VIMS: Aborted

Functest caught a bug for us that we will fix post RC0: 
https://jira.opnfv.org/browse/APEX-59, which also caused VIMS to abort.

TODO looking past RC0:
1.  Found an issue where ONOS build artifact was not being included in 
our build.  Patch currently up to fix that. (Waiting on #2)
2.  However, because of #1, our artifact (rpm) size grows over 4GB which 
is the limit of cpio, and breaks the rpm build.  Dan is working on 
splitting our rpm into separate rpms which will fix this problem. Patch 
currently being tested: https://gerrit.opnfv.org/gerrit/#/c/6227/
3.  Test ONOS and make sure it works with our integration. (Depends on 
#1, #2)
4.  Dan was able to get OpenContrail to build as an RPM.  Stuart has 
provided us configuration info.  Next step is to see if the RPM works 
and if we can install/configure OpenContrail.
5.  Michael is working on getting AODH support for Doctor into Apex. 
Patch WIP: https://gerrit.opnfv.org/gerrit/#/c/6631/
6.  I'm working on getting SFC support.  Plan is to build Apex RPM with 
Be version of ODL included, and I'm writing up some ansible modules to 
update kernel, install NSH OVS, and Tacker.
7.  Yardstick was integrated into Apex, but is failing to run.  Will 
debug that with Yardstick team.

Thanks,

Tim Rozet
Red Hat SDN Team

----- Original Message -----
From: "Tim Rozet" <trozet at redhat.com>
To: "Debra Scott" <dscott at linuxfoundation.org>
Cc: opnfv-tech-discuss at lists.opnfv.org
Sent: Wednesday, January 13, 2016 8:27:45 AM
Subject: Re: [opnfv-tech-discuss] [apex] RC0 readiness/status report

Hi Debra,
Will be late again today so here is current status:
Accomplishments since Monday:
1.  Ceph is working and merged.
2.  Network isolation is fully working (admin, private, public, storage 
networks created and used in deployment).
3.  Was able to get functest to run with 118 pass/27 fail (Thanks Jose 
and Morgan for the help).  There was a slight error in functest where 
some of our keystone users got deleted, so I am hoping on the next run 
there will be more passes: 
http://213.77.62.197/results?project=functest&case=Tempest&installer=apex

Current status for RC0:
I believe all the patches are in place to provide us an RC0 artifact. 
The only remaining issue is functest failed to start again on our daily 
last night, so we need to fix that so we can get a valid artifact.

TODO for RC0:
1.  Fix functest execution in our daily.
2.  Merge current master code to stable/b and produce RC0 candidate via 
daily job.

TODO looking past RC0:
1.  Found an issue where ONOS build artifact was not being included in 
our build.  Patch currently up to fix that.
2.  However, because of #1, our artifact (rpm) size grows over 4GB which 
is the limit of cpio, and breaks the rpm build.  Dan is working on 
splitting our rpm into separate rpms which will fix this problem.
3.  Test ONOS and make sure it works with our integration.
4.  Dan was able to get OpenContrail to build as an RPM.  Waiting on 
Stuart for more information on what we need to do to integrate.
5.  Michael is working on getting AODH support for Doctor into Apex.
6.  I'll work on getting SFC supported.

Tim Rozet
Red Hat SDN Team

----- Original Message -----
From: "Tim Rozet" <trozet at redhat.com>
To: "Debra Scott" <dscott at linuxfoundation.org>
Cc: "Dan Radez" <dradez at redhat.com>, "Michael Chapman" 
<michapma at redhat.com>, opnfv-tech-discuss at lists.opnfv.org
Sent: Sunday, January 10, 2016 11:19:40 PM
Subject: [apex] RC0 readiness/status report

Hi Debra,
I will be late to the daily release ops meeting tomorrow, so I wanted to 
relay our status.

Accomplishments this past week:
1.  Upstream artifacts are frozen for B-release, this way we cannot be 
affected anymore by upstream breakage
2.  OPNFV Apex CI pipieline is stable now for builds and virtual 
deployments (last 4 builds in a row successful)
3.  LF POD1 is up and stable, and we completed our first baremetal 
deployment there today:
https://build.opnfv.org/ci/view/apex/job/apex-deploy-baremetal-master/12/
4.  Our installer now takes deploy, network, and inventory settings as 
separate yaml inputs and parses them correctly
5.  ODL Lithium with L2 support is what is currently being deployed in CI
6.  ONOS code has been merged into Apex and included in latest artifact 
build

TODO this week:
1.  Get functest executing again on our daily jobs (working on that now)
2.  Get Ceph working on controllers and part of our deploy (patch in 
place https://gerrit.opnfv.org/gerrit/#/c/5521/)
3.  Create jenkins job to test ONOS
4.  Meet with Stuart and figure out how to get OpenContrail support asap

If we can get #1 and #2 (with good functest results) completed then we 
have an RC0 candidate build.  I am hopeful we can achieve that by EOB 
Monday.

Thanks,

Tim Rozet
Red Hat SDN Team
_______________________________________________
opnfv-tech-discuss mailing list
opnfv-tech-discuss at lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss
_______________________________________________
opnfv-tech-discuss mailing list
opnfv-tech-discuss at lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss





More information about the dev mailing list