[Rdo-list] RDO, packstack, Keypair creation is failing

Thales thaleslv at yahoo.com
Thu Jan 14 05:34:11 UTC 2016


"I wasn't able to reproduce your issue."
Thanks for that, Sasha!
I have looked through the eight log files in /var/log/nova and I found three things, which you can see here:http://paste.openstack.org/show/483844/

It looks like the SQL server is not working right?
System resources.   I'm looking at the Gnome System Monitor. Total Memory is 9.4 gigabytes, with 3.2 gigbytes used.
But, this is strange, it says that CPU usage is at 100%.    Not sure how that can be.
vmtoolsd is using around 98% of the cpu!     I have an 8 core machine, so I'm not sure how this is measuring.

...John 

    On Wednesday, January 13, 2016 9:48 PM, Sasha Chuzhoy <sasha at redhat.com> wrote:
 

 Hi John,
I wasn't able to reproduce your issue.
Could you please check the logs for errors and also double check that the system's resources aren't exhausted.
Thanks.

Best regards,
Sasha Chuzhoy.

----- Original Message -----
> From: "Thales" <thaleslv at yahoo.com>
> To: "Sasha Chuzhoy" <sasha at redhat.com>
> Cc: "Ivan Chavero" <ichavero at redhat.com>, rdo-list at redhat.com
> Sent: Wednesday, January 13, 2016 7:47:34 PM
> Subject: Re: [Rdo-list] RDO, packstack, Keypair creation is failing
> 
> Okay, I decided to go back to the very start, to a clean install of CentOS 7.
>    I ran all of the commands to install rdo as root.That is, the commands
> from the quick start website here:
>  https://www.rdoproject.org/install/quickstart/
> 
> Alas, the same HTTP 400 error crops up!   I ran the keypair commands from the
> CLI as well.  Wow.
> 
>   It has to be something simple and obvious.
> ...John
> 
>    On Wednesday, January 13, 2016 3:52 PM, Sasha Chuzhoy <sasha at redhat.com>
>    wrote:
>  
> 
>  Did the run of "packstack --allinone" completed successfully or exited with
>  error?
> 
> The should be no conflict with the previous install (not sure if the previous
> install completed successfully).
> Thanks.
> 
> Best regards,
> Sasha Chuzhoy.
> 
> ----- Original Message -----
> > From: "Thales" <thaleslv at yahoo.com>
> > To: "Sasha Chuzhoy" <sasha at redhat.com>
> > Cc: "Ivan Chavero" <ichavero at redhat.com>, rdo-list at redhat.com
> > Sent: Wednesday, January 13, 2016 4:38:29 PM
> > Subject: Re: [Rdo-list] RDO, packstack, Keypair creation is failing
> > 
> > Sasha,
> > Okay,  I ran it.    I hope there is not a conflict with the previous
> > install.
> >  I ran the web interface, Dashboard, and the same error pops up, the HTTP
> > 400 error.     I then ran the keypair command line command at root, and get
> > a different error, a n HTTP 401 authentication error:
> > Here are the commands and the
> > output:http://paste.openstack.org/show/483817/
> > 
> > 
> > 
> > ...John
>> > 
> >    On Wednesday, January 13, 2016 2:46 PM, Sasha Chuzhoy <sasha at redhat.com>
> >    wrote:
>> > 
> >  John,
> > please try to run the " packstack --allinone" command as root (or with
> > sudo).
> > 
> > Then see if the error reproduces.
> > Thanks.
> > 
> > Best regards,
> > Sasha Chuzhoy.
> > 
> > ----- Original Message -----
> > > From: "Thales" <thaleslv at yahoo.com>
> > > To: "Ivan Chavero" <ichavero at redhat.com>
> > > Cc: rdo-list at redhat.com
> > > Sent: Wednesday, January 13, 2016 12:26:21 PM
> > > Subject: Re: [Rdo-list] RDO, packstack, Keypair creation is failing
> > > 
> > > Ivan,
> > > 
> > > You're right, I ran it without the sudo command. I was following the
> > > directions here, where they don't use sudo:
> > > https://www.rdoproject.org/install/quickstart/
> > > 
> > > 
> > > Is that wrong?
> > > 
> > > Regards,
> > > ...John
> > > 
> > > 
> > > On Wednesday, January 13, 2016 9:37 AM, Ivan Chavero
> > > <ichavero at redhat.com>
> > > wrote:
> > > 
> > > 
> > > 
> > > 
> > > > 
> > > > Here is the pastebin, basically a repeat of the "quickstart" website
> > > > 
> > > > http://paste.openstack.org/show/483685/
> > > 
> > > 
> > > Looking at your history i noticed that you run packstack withuout the
> > > sudo
> > > command.
> > > Are you sure it finished correctly? It should be run as root.
> > > 
> > > Cheers,
> > > Ivan
> > > 
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Rdo-list mailing list
> > > Rdo-list at redhat.com
> > > https://www.redhat.com/mailman/listinfo/rdo-list
> > > 
> > > To unsubscribe: rdo-list-unsubscribe at redhat.com
> > 
> > 
> > 
> 
> 

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20160114/833ab8a7/attachment.html>


More information about the dev mailing list