[Rdo-list] [rdo-manager] is there a stable version?

Sat Sep 19 20:31:18 UTC 2015

thank you
i was able to get the undercloud installed (on a saturday!)

currently downloading images

may i suggest that deltarpm be installed by default centos7 or somehow
pulled in with rdo-manager?

On Fri, Sep 18, 2015 at 3:15 PM, James Slagle <jslagle at redhat.com> wrote:

> To address $SUBJECT directly:
>
> Not currently. We had rdo-manager running with kilo for a while, but some
> of
> the packages got stale as priorities shifted. We switched some of the
> builds to
> pull from master, and that worked for a while, but now it's failing again.
>
> We've instead been focusing our effort into making upstream TripleO stable
> at
> this time (which follows the same rdo-manager workflow). That's currently
> using
> a delorean trunk repo that typically lags a week or 2 behind the "current"
> repo, so currently Liberty based.
>
> That's a work in progress, as folks are discovering. We're resource
> constrained
> on several fronts, but it's actively being worked on daily in #tripleo on
> freenode.
>
> The plan is to have the issues worked out and be able to keep not only
> stability with Delorean trunk, but on RDO Liberty as well.
>
> Please see my inline reply as well below, it should help some to get
> further
> along.
>
> On Fri, Sep 18, 2015 at 01:42:55PM -0400, Jeff Peeler wrote:
> > On Fri, Sep 18, 2015 at 12:42 PM, Christopher Brown <cbrown2 at ocf.co.uk>
> wrote:
> > > Something is going very wrong somewhere.
> > >
> > > I have tried several different ways _just_ to install the undercloud.
> > >
> > > Using:
> > >
> > > http://trunk.rdoproject.org/centos7/current/delorean.repo
> > >
> > > I get the following error:
> > >
> > > + semodule -i /opt/stack/selinux-policy/ipxe.pp
> > > dib-run-parts Fri 18 Sep 17:01:04 BST 2015 00-apply-selinux-policy
> > > completed
> > > dib-run-parts Fri 18 Sep 17:01:04 BST 2015
> > > Running
> /usr/libexec/os-refresh-config/configure.d/20-compile-and-install-selinux-policies
> > > + set -o pipefail
> > > ++ mktemp -d
> > > + TMPDIR=/tmp/tmp.ZWLD1K9BTD
> > > + '[' -x /usr/sbin/semanage ']'
> > > + cd /tmp/tmp.ZWLD1K9BTD
> > > ++ ls '/opt/stack/selinux-policy/*.te'
> > > ls: cannot access /opt/stack/selinux-policy/*.te: No such file or
> > > directory
> > > + semodule -i '/tmp/tmp.ZWLD1K9BTD/*.pp'
> > > semodule:  Failed on /tmp/tmp.ZWLD1K9BTD/*.pp!
> > > [2015-09-18 17:01:04,559] (os-refresh-config) [ERROR] during configure
> > > phase. [Command '['dib-run-parts',
> > > '/usr/libexec/os-refresh-config/configure.d']' returned non-zero exit
> > > status 1]
> > >
> > > With
> > >
> > >
> http://trunk.rdoproject.org/centos7/38/1c/381cac9139096bfef49952f3fd67e19451160b61_4bc2d731/delorean.repo
> > >
> > > I get the same error.
> > >
> > > This is regardless of:
> > >
> > > export DIB_INSTALLTYPE_puppet_modules=source
> >
> > I ran into this error as well. Unfortunately, using the delorean repo
> > straight from current is as this thread indicates, not stable. There's
> > an outstanding review here that uses a good delorean repo to install
> > from:
> >
> > https://review.openstack.org/#/c/223293/2
> >
> > I highly recommend using that and going from there. Do make note that
> > in this particular delorean repo, inspector needs to be set to
> > disabled and the conductor service either restarted or sent a HUP
> > signal.
>
> Thanks Jeff for pointing this out. I've pushed up a couple more patchsets
> as
> well, so make sure to be looking at the latest one:
> https://review.openstack.org/#/c/223293/
> If you git clone tripleo-docs, run "tox -e docs" from your checkout, and
> the
> docs will be built under doc/build. You can also view an html build
> directly
> from the jenkins job results on the patchset.
>
> In addition to that, there is another patch in flight to address the
> packaging
> changes around ironic-inspector:
> https://review.openstack.org/#/c/223267
>
> That's a little bit harder to apply and try out, so I built it into an rpm
> if
> folks are blocked on this:
>
> https://fedorapeople.org/~slagle/instack-undercloud-2.1.2.post206-99999.noarch.rpm
>
> Just before running "openstack undercloud install" you'll need to:
> sudo yum install -y yum-plugin-versionlock
> sudo rpm -Uvh --force
> https://fedorapeople.org/~slagle/instack-undercloud-2.1.2.post206-99999.noarch.rpm
> sudo yum versionlock instack-undercloud
>
> That got me a successful undercloud install. I'm testing image builds now.
>
> If anyone does try these patches, reviews in gerrit are appreciated.
>
>
> >
> > _______________________________________________
> > Rdo-list mailing list
> > Rdo-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/rdo-list
> >
> > To unsubscribe: rdo-list-unsubscribe at redhat.com
> --
> -- James Slagle
> --
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
>

-- 

<https://candidate.peoplecert.org/ReportsLink.aspx?argType=1&id=13D642E995903C076FA394F816CC136539DBA6A32D7305539E4219F5A650358C02CA2ED9F1F26319&AspxAutoDetectCookieSupport=1>

*805010942448935*
<https://www.redhat.com/wapps/training/certification/verify.html?certNumber=805010942448935&verify=Verify>

*GR750055912MA*
<https://candidate.peoplecert.org/ReportsLink.aspx?argType=1&id=13D642E995903C076FA394F816CC136539DBA6A32D7305539E4219F5A650358C02CA2ED9F1F26319&AspxAutoDetectCookieSupport=1>

*Link to me on LinkedIn <http://www.linkedin.com/in/mohammedarafa>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20150919/8495df5f/attachment.html>