[Rdo-list] Yan: Re: OverCloud deploy fails with error "No valid host was found"

Tue Oct 20 10:02:51 UTC 2015

Hi,

>From what I can tell from the screenshots DHCP fails for both of the nics after loading the inspector image, thus the nodes have no ip address and the Network is unreachable message. Can you see any DHCP messages(output of dhclient) on the console?
You could try leaving the nodes connected *only* to the provisioning network and rerun introspection. 

Thanks,
Marius

----- Original Message -----
> From: "Esra Celik" <celik.esra at tubitak.gov.tr>
> To: "Sasha Chuzhoy" <sasha at redhat.com>
> Cc: "Marius Cornea" <mcornea at redhat.com>, rdo-list at redhat.com
> Sent: Tuesday, October 20, 2015 7:31:41 AM
> Subject: Re: Yan: Re: [Rdo-list] OverCloud deploy fails with error "No valid host was found"
> 
> Ok, I ran ironic node-set-provision-state [UUID] provide for each node and
> retried deployment. I attached the screenshots
> 
> [stack at undercloud ~]$ ironic node-list
> +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> | UUID | Name | Instance UUID | Power State | Provisioning State |
> | Maintenance |
> +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> | 5b28998f-4dc8-42aa-8a51-521e20b1e5ed | None | None | power off | available
> | | False |
> | 6f35ac24-135d-4b99-8a24-fa2b731bd218 | None | None | power off | available
> | | False |
> +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> 
> [stack at undercloud ~]$ nova flavor-list
> +--------------------------------------+-----------+-----------+------+-----------+------+-------+-------------+-----------+
> | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor |
> | Is_Public |
> +--------------------------------------+-----------+-----------+------+-----------+------+-------+-------------+-----------+
> | b9428c86-5696-4d68-a0e0-77faf4e7f627 | baremetal | 4096 | 40 | 0 | | 1 |
> | 1.0 | True |
> +--------------------------------------+-----------+-----------+------+-----------+------+-------+-------------+-----------+
> 
> [stack at undercloud ~]$ openstack overcloud deploy --templates
> Deploying templates in the directory
> /usr/share/openstack-tripleo-heat-templates
> Stack failed with status: resources.Controller: resources[0]:
> ResourceInError: resources.Controller: Went to status ERROR due to "Message:
> No valid host was found. There are not enough hosts available., Code: 500"
> Heat Stack update failed.
> 
> [stack at undercloud ~]$ sudo systemctl|grep ironic
> openstack-ironic-api.service loaded active running OpenStack Ironic API
> service
> openstack-ironic-conductor.service loaded active running OpenStack Ironic
> Conductor service
> openstack-ironic-inspector-dnsmasq.service loaded active running PXE boot
> dnsmasq service for Ironic Inspector
> openstack-ironic-inspector.service loaded active running Hardware
> introspection service for OpenStack Ironic
> 
> "journalctl -fl -u openstack-ironic-conductor.service" gives no warning or
> error.
> 
> Regards
> 
> Esra ÇELİK
> TÜBİTAK BİLGEM
> www.bilgem.tubitak.gov.tr
> celik.esra at tubitak.gov.tr
> 
> ----- Orijinal Mesaj -----
> 
> > Kimden: "Sasha Chuzhoy" <sasha at redhat.com>
> > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr>
> > Kk: "Marius Cornea" <mcornea at redhat.com>, rdo-list at redhat.com
> > Gönderilenler: 19 Ekim Pazartesi 2015 19:13:24
> > Konu: Re: Yan: Re: [Rdo-list] OverCloud deploy fails with error "No valid
> > host was found"
> 
> > Could you please
> > 1.run:
> > 'ironic node-set-provision-state [UUID] provide' for each node where UUID
> > is
> > replaced with the actual UUID of the node (ironic node-list).
> 
> > 2.retry the deployment
> > Thanks.
> 
> > Best regards,
> > Sasha Chuzhoy.
> 
> > ----- Original Message -----
> > > From: "Esra Celik" <celik.esra at tubitak.gov.tr>
> > > To: "Sasha Chuzhoy" <sasha at redhat.com>
> > > Cc: "Marius Cornea" <mcornea at redhat.com>, rdo-list at redhat.com
> > > Sent: Monday, October 19, 2015 11:39:46 AM
> > > Subject: Yan: Re: [Rdo-list] OverCloud deploy fails with error "No valid
> > > host was found"
> > >
> > > Hi Sasha
> > >
> > >
> > >
> > > This is my instackenv.json. MAC addresses are, em2 interface’s MAC
> > > address of the nodes
> > >
> > > {
> > > "nodes": [
> > > {
> > > "pm_type":"pxe_ipmitool",
> > > "mac":[
> > > "08:9E:01:58:CC:A1"
> > > ],
> > > "cpu":"4",
> > > "memory":"8192",
> > > "disk":"10",
> > > "arch":"x86_64",
> > > "pm_user":"root",
> > > "pm_password”:”<pwd>”,
> > > "pm_addr":"192.168.0.18"
> > > },
> > > {
> > > "pm_type":"pxe_ipmitool",
> > > "mac":[
> > > "08:9E:01:58:D0:3D"
> > > ],
> > > "cpu":"4",
> > > "memory":"8192",
> > > "disk":"100",
> > > "arch":"x86_64",
> > > "pm_user":"root",
> > > "pm_password”:”<pwd>”,
> > > "pm_addr":"192.168.0.19"
> > > }
> > > ]
> > > }
> > >
> > > This is my undercloud.conf file:
> > > image_path = .
> > > local_ip = 192.0.2.1/24
> > > local_interface = em2
> > > masquerade_network = 192.0.2.0/24
> > > dhcp_start = 192.0.2.5
> > > dhcp_end = 192.0.2.24
> > > network_cidr = 192.0.2.0/24
> > > network_gateway = 192.0.2.1
> > > inspection_interface = br-ctlplane
> > > inspection_iprange = 192.0.2.100,192.0.2.120
> > > inspection_runbench = false
> > > undercloud_debug = true
> > > enable_tuskar = false
> > > enable_tempest = false
> > >
> > >
> > >
> > > I have previously sent the screenshot of the consoles during
> > > introspection
> > > stage. Now I am attaching them again.
> > > I cannot login to consoles because introspection stage is not completed
> > > successfully and I don't know the IP addresses. (nova list is empty)
> > > (I don't know if I can login with the IP addresses that I was previously
> > > set
> > > by myself. I am not able to reach the nodes now, from home.)
> > >
> > > I ran the flavor-create command after the introspection stage. But
> > > introspection was not completed successfully,
> > > I just ran deploy command to see if nova list fills during deployment.
> > >
> > >
> > > Esra ÇELİK
> > > TÜBİTAK BİLGEM
> > > www.bilgem.tubitak.gov.tr
> > > celik.esra at tubitak.gov.tr
> > >
> > >
> > >
> > > ----- Sasha Chuzhoy <sasha at redhat.com> şöyle yazıyor:> Esra, Is it
> > > possible to check the console of the nodes being introspected and/or
> > > deployed? I wonder if the instackenv.json file is accurate. Also, what's
> > > the
> > > output from 'nova flavor-list'? Thanks. Best regards, Sasha Chuzhoy.
> > > -----
> > > Original Message ----- > From: "Esra Celik" <celik.esra at tubitak.gov.tr> >
> > > To: "Marius Cornea" <mcornea at redhat.com> > Cc: "Sasha Chuzhoy"
> > > <sasha at redhat.com>, rdo-list at redhat.com > Sent: Monday, October 19, 2015
> > > 9:51:51 AM > Subject: Re: [Rdo-list] OverCloud deploy fails with error
> > > "No
> > > valid host was found" > > All 3 baremetal nodes (1 undercloud, 2
> > > overcloud)
> > > have 2 nics. > > the undercloud machine's ip config is as follows: > >
> > > [stack at undercloud ~]$ ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536
> > > qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd
> > > 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever
> > > preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever
> > > preferred_lft forever > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu
> > > 1500
> > > qdisc mq state UP qlen > 1000 > link/ether 08:9e:01:50:8a:21 brd
> > > ff:ff:ff:ff:ff:ff > inet 10.1.34.81/24 brd 10.1.34.255 scope global em1 >
> > > valid_lft forever preferred_lft forever > inet6
> > > fe80::a9e:1ff:fe50:8a21/64
> > > scope link > valid_lft forever preferred_lft forever > 3: em2:
> > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovs-system >
> > > state UP qlen 1000 > link/ether 08:9e:01:50:8a:22 brd ff:ff:ff:ff:ff:ff >
> > > 4:
> > > ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN >
> > > link/ether 9a:a8:0f:ec:42:15 brd ff:ff:ff:ff:ff:ff > 5: br-ctlplane:
> > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > state UNKNOWN
> > > >
> > > link/ether 08:9e:01:50:8a:22 brd ff:ff:ff:ff:ff:ff > inet 192.0.2.1/24
> > > brd
> > > 192.0.2.255 scope global br-ctlplane > valid_lft forever preferred_lft
> > > forever > inet6 fe80::a9e:1ff:fe50:8a22/64 scope link > valid_lft forever
> > > preferred_lft forever > 6: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc
> > > noop
> > > state DOWN > link/ether fa:85:ac:92:f5:41 brd ff:ff:ff:ff:ff:ff > > I am
> > > using em2 for pxe boot on the other machines.. So I configured >
> > > instackenv.json to have em2's MAC address > For overcloud nodes, em1 was
> > > configured to have 10.1.34.x ip, but after image > deploy I am not sure
> > > what
> > > happened for that nic. > > Thanks > > Esra ÇELİK > TÜBİTAK
> > > BİLGEM > www.bilgem.tubitak.gov.tr > celik.esra at tubitak.gov.tr > -----
> > > Orijinal Mesaj ----- > > > Kimden: "Marius Cornea" <mcornea at redhat.com> >
> > > >
> > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > Kk: "Sasha Chuzhoy"
> > > <sasha at redhat.com>, rdo-list at redhat.com > > Gönderilenler: 19 Ekim
> > > Pazartesi 2015 15:36:58 > > Konu: Re: [Rdo-list] OverCloud deploy fails
> > > with
> > > error "No valid host was > > found" > > > Hi, > > > I believe the nodes
> > > were
> > > stuck in introspection so they were not ready for > > deployment thus the
> > > not enough hosts message. Can you describe the > > networking setup (how
> > > many nics the nodes have and to what networks they're > > connected)? > >
> > > >
> > > Thanks, > > Marius > > > ----- Original Message ----- > > > From: "Esra
> > > Celik" <celik.esra at tubitak.gov.tr> > > > To: "Sasha Chuzhoy"
> > > <sasha at redhat.com> > > > Cc: "Marius Cornea" <mcornea at redhat.com>,
> > > rdo-list at redhat.com > > > Sent: Monday, October 19, 2015 12:34:32 PM > >
> > > >
> > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid host
> > > >
> > > >
> > > > was found" > > > > > > Hi again, > > > > > > "nova list" was empty
> > > > after
> > > introspection stage which was not completed > > > successfully. So I
> > > cloud
> > > not ssh the nodes.. Is there another way to > > > obtain > > > the IP
> > > addresses? > > > > > > [stack at undercloud ~]$ sudo systemctl|grep ironic >
> > > >
> > > > openstack-ironic-api.service loaded active running OpenStack Ironic API
> > > > >
> > > > > service > > > openstack-ironic-conductor.service loaded active
> > > > > running
> > > OpenStack Ironic > > > Conductor service > > >
> > > openstack-ironic-inspector-dnsmasq.service loaded active running PXE boot
> > > >
> > > > > dnsmasq service for Ironic Inspector > > >
> > > openstack-ironic-inspector.service loaded active running Hardware > > >
> > > introspection service for OpenStack Ironic > > > > > > If I start
> > > deployment
> > > anyway I get 2 nodes in ERROR state > > > > > > [stack at undercloud ~]$
> > > openstack overcloud deploy --templates > > > Deploying templates in the
> > > directory > > > /usr/share/openstack-tripleo-heat-templates > > > Stack
> > > failed with status: resources.Controller: resources[0]: > > >
> > > ResourceInError: resources.Controller: Went to status ERROR due to > > >
> > > "Message: > > > No valid host was found. There are not enough hosts
> > > available., Code: > > > 500" > > > > > > [stack at undercloud ~]$ nova list
> > > >
> > > >
> > > >
> > > +--------------------------------------+-------------------------+--------+------------+-------------+----------+
> > > > > > | ID | Name | Status | Task State | Power State | Networks | > > >
> > > +--------------------------------------+-------------------------+--------+------------+-------------+----------+
> > > > > > | 3a8e1fe4-d189-4fce-9912-dcf49fefb000 | overcloud-controller-0 |
> > > ERROR | > > > | - > > > | | > > > | NOSTATE | | > > > |
> > > 616b45c6-2749-418f-8aa4-fe2bfe164782 | overcloud-novacompute-0 | ERROR >
> > > >
> > > >
> > > | | > > > | - > > > | | NOSTATE | | > > >
> > > +--------------------------------------+-------------------------+--------+------------+-------------+----------+
> > > > > > > > > Did the repositories update during weekend? Should I better
> > > restart the > > > overall Undercloud and Overcloud installation from the
> > > beginning? > > > > > > Thanks. > > > > > > Esra ÇELİK > > > Uzman
> > > Araştırmacı > > > Bilişim Teknolojileri Enstitüsü > > >
> > > TÜBİTAK BİLGEM > > > 41470 GEBZE - KOCAELİ > > > T +90 262 675 3140
> > > >
> > > >
> > > > F +90 262 646 3187 > > > www.bilgem.tubitak.gov.tr > > >
> > > celik.esra at tubitak.gov.tr > > >
> > > ................................................................ > > > >
> > > >
> > > >
> > > Sorumluluk Reddi > > > > > > ----- Orijinal Mesaj ----- > > > > > > >
> > > Kimden: "Sasha Chuzhoy" <sasha at redhat.com> > > > > Kime: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr> > > > > Kk: "Marius Cornea"
> > > <mcornea at redhat.com>, rdo-list at redhat.com > > > > Gönderilenler: 16
> > > Ekim Cuma 2015 18:44:49 > > > > Konu: Re: [Rdo-list] OverCloud deploy
> > > fails
> > > with error "No valid host > > > > was > > > > found" > > > > > > > Hi
> > > Esra,
> > > > > > > if the undercloud nodes are UP - you can login with: ssh > > > >
> > > heat-admin@<IP> > > > > You can see the IP of the nodes with: "nova
> > > list".
> > > >
> > > > > > BTW, > > > > What do you see if you run "sudo systemctl|grep
> > > > > > ironic"
> > > on the > > > > undercloud? > > > > > > > Best regards, > > > > Sasha
> > > Chuzhoy. > > > > > > > ----- Original Message ----- > > > > > From: "Esra
> > > Celik" <celik.esra at tubitak.gov.tr> > > > > > To: "Sasha Chuzhoy"
> > > <sasha at redhat.com> > > > > > Cc: "Marius Cornea" <mcornea at redhat.com>,
> > > rdo-list at redhat.com > > > > > Sent: Friday, October 16, 2015 1:40:16 AM >
> > > >
> > > > > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid
> > > > > > >
> > > > > > > host > > > > > was found" > > > > > > > > > > Hi Sasha, > > > > >
> > > > > > > >
> > > > > > > I have 3 nodes, 1 Undercloud, 1 Overcloud-Controller, 1 > > > > >
> > > Overcloud-Compute > > > > > > > > > > This is my undercloud.conf file: >
> > > >
> > > >
> > > > > > > > > > image_path = . > > > > > local_ip = 192.0.2.1/24 > > > > >
> > > local_interface = em2 > > > > > masquerade_network = 192.0.2.0/24 > > > >
> > > >
> > > dhcp_start = 192.0.2.5 > > > > > dhcp_end = 192.0.2.24 > > > > >
> > > network_cidr = 192.0.2.0/24 > > > > > network_gateway = 192.0.2.1 > > > >
> > > >
> > > inspection_interface = br-ctlplane > > > > > inspection_iprange =
> > > 192.0.2.100,192.0.2.120 > > > > > inspection_runbench = false > > > > >
> > > undercloud_debug = true > > > > > enable_tuskar = false > > > > >
> > > enable_tempest = false > > > > > > > > > > IP configuration for the
> > > Undercloud is as follows: > > > > > > > > > > stack at undercloud ~]$ ip
> > > addr
> > > >
> > > > > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
> > > > > > > UNKNOWN
> > > > > > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > > >
> > > inet 127.0.0.1/8 scope host lo > > > > > valid_lft forever preferred_lft
> > > forever > > > > > inet6 ::1/128 scope host > > > > > valid_lft forever
> > > preferred_lft forever > > > > > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP>
> > > mtu 1500 qdisc mq state UP > > > > > qlen > > > > > 1000 > > > > >
> > > link/ether 08:9e:01:50:8a:21 brd ff:ff:ff:ff:ff:ff > > > > > inet
> > > 10.1.34.81/24 brd 10.1.34.255 scope global em1 > > > > > valid_lft
> > > forever
> > > preferred_lft forever > > > > > inet6 fe80::a9e:1ff:fe50:8a21/64 scope
> > > link
> > > > > > > > valid_lft forever preferred_lft forever > > > > > 3: em2:
> > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master > > > > >
> > > ovs-system > > > > > state UP qlen 1000 > > > > > link/ether
> > > 08:9e:01:50:8a:22 brd ff:ff:ff:ff:ff:ff > > > > > 4: ovs-system:
> > > <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > > > > > link/ether
> > > 9a:a8:0f:ec:42:15 brd ff:ff:ff:ff:ff:ff > > > > > 5: br-ctlplane:
> > > <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > > > > > noqueue > > >
> > > >
> > > >
> > > state UNKNOWN > > > > > link/ether 08:9e:01:50:8a:22 brd
> > > ff:ff:ff:ff:ff:ff
> > > >
> > > > > > > inet 192.0.2.1/24 brd 192.0.2.255 scope global br-ctlplane > > >
> > > > > > > >
> > > > > > > >
> > > valid_lft forever preferred_lft forever > > > > > inet6
> > > fe80::a9e:1ff:fe50:8a22/64 scope link > > > > > valid_lft forever
> > > preferred_lft forever > > > > > 6: br-int: <BROADCAST,MULTICAST> mtu 1500
> > > qdisc noop state DOWN > > > > > link/ether fa:85:ac:92:f5:41 brd
> > > ff:ff:ff:ff:ff:ff > > > > > > > > > > And I attached two screenshots
> > > showing
> > > the boot stage for overcloud > > > > > nodes > > > > > > > > > > Is there
> > > a
> > > way to login the overcloud nodes to see their IP > > > > > configuration?
> > > >
> > > > > > > > > > > > Thanks > > > > > > > > > > Esra ÇELİK > > > > >
> > > TÜBİTAK BİLGEM > > > > > www.bilgem.tubitak.gov.tr > > > > >
> > > celik.esra at tubitak.gov.tr > > > > > > > > > > ----- Orijinal Mesaj -----
> > > >
> > > >
> > > > > > > > > > > > Kimden: "Sasha Chuzhoy" <sasha at redhat.com> > > > > > >
> > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > > > Kk: "Marius
> > > Cornea" <mcornea at redhat.com>, rdo-list at redhat.com > > > > > >
> > > Gönderilenler: 15 Ekim Perşembe 2015 16:58:41 > > > > > > Konu: Re:
> > > [Rdo-list] OverCloud deploy fails with error "No valid > > > > > > host >
> > > >
> > > > > > > was > > > > > > found" > > > > > > > > > > > Just my 2 cents. > >
> > > > > > > >
> > > > > > Did you make sure that all the registered nodes are configured to >
> > > > > > >
> > > > > > > boot > > > > > > off > > > > > > the right NIC first? > > > > > >
> > > Can you watch the console and see what happens on the problematic > > > >
> > > >
> > > > nodes > > > > > > upon > > > > > > boot? > > > > > > > > > > > Best
> > > regards, > > > > > > Sasha Chuzhoy. > > > > > > > > > > > ----- Original
> > > Message ----- > > > > > > > From: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr>
> > > >
> > > > > > > > > To: "Marius Cornea" <mcornea at redhat.com> > > > > > > > Cc:
> > > rdo-list at redhat.com > > > > > > > Sent: Thursday, October 15, 2015
> > > 4:40:46
> > > AM > > > > > > > Subject: Re: [Rdo-list] OverCloud deploy fails with
> > > error
> > > "No > > > > > > > valid > > > > > > > host > > > > > > > was found" > > >
> > > >
> > > > > > > > > > > > > > > > > > > > Sorry for the late reply > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > ironic node-show results are below. I have my nodes power on >
> > > > > > > > >
> > > > > > > > >
> > > > > > > after > > > > > > > introspection bulk start. And I get the
> > > following warning > > > > > > > Introspection didn't finish for nodes > >
> > > >
> > > > > > >
> > > 5b28998f-4dc8-42aa-8a51-521e20b1e5ed,6f35ac24-135d-4b99-8a24-fa2b731bd218
> > > >
> > > > > > > > > > > > > > > > Doesn't seem to be the same issue with > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > https://www.redhat.com/archives/rdo-list/2015-October/msg00174.html > >
> > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > [stack at undercloud ~]$ ironic node-list > > > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > | UUID | Name | Instance UUID | Power State | Provisioning
> > > State > > > > > > > | | > > > > > > > | Maintenance | > > > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > | 5b28998f-4dc8-42aa-8a51-521e20b1e5ed | None | None |
> > > > > > > > > > | power
> > > on | > > > > > > > | available > > > > > > > | | > > > > > > > | False |
> > > >
> > > >
> > > > > > > > | 6f35ac24-135d-4b99-8a24-fa2b731bd218 | None | None | power on
> > > > > > > > | |
> > > > > > > > > > | available > > > > > > > | | > > > > > > > | False | > > >
> > > > > > > > > > | >
> > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ironic
> > > node-show > > > > > > > 5b28998f-4dc8-42aa-8a51-521e20b1e5ed > > > > > >
> > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > | Property | Value | > > > > > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > | target_power_state | None | > > > > > > > | extra | {} |
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > > > > | last_error | None | > > > > > > > | updated_at |
> > > 2015-10-15T08:26:42+00:00 | > > > > > > > | maintenance_reason | None | >
> > > >
> > > > > > > > | provision_state | available | > > > > > > > | clean_step | {}
> > > > > > > > | |
> > > > > > > > > > | uuid | 5b28998f-4dc8-42aa-8a51-521e20b1e5ed | > > > > > >
> > > > > > > > > > | >
> > > | console_enabled | False | > > > > > > > | target_provision_state | None
> > > | |
> > > > > > > > > > | provision_updated_at | 2015-10-15T08:26:42+00:00 | > > >
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > | maintenance | False | > > > > > > > | inspection_started_at | None
> > > > > | |
> > > > > | >
> > > > > > > > > | inspection_finished_at | None | > > > > > > > | power_state
> > > > > > > > > | |
> > > power on | > > > > > > > | driver | pxe_ipmitool | > > > > > > > |
> > > reservation | None | > > > > > > > | properties | {u'memory_mb': u'8192',
> > > u'cpu_arch': u'x86_64', > > > > > > > | u'local_gb': > > > > > > > |
> > > u'10',
> > > | > > > > > > > | | u'cpus': u'4', u'capabilities': u'boot_option:local'}
> > > | > > > > > > > | | |
> > > > > > > > > > | instance_uuid | None | > > > > > > > | name | None | > >
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > > | driver_info | {u'ipmi_password': u'******', u'ipmi_address': > >
> > > > > > | >
> > > > > > | >
> > > > > > | u'192.168.0.18', | > > > > > > > | | u'ipmi_username': u'root',
> > > u'deploy_kernel': > > > > > > > | | u'49a2c8d4-a283-4bdf-8d6f- > > > > >
> > > >
> > > >
> > > | | | > > > > > > > | | e83ae28da047', u'deploy_ramdisk': u'3db3dbed- | >
> > > | | | > > > > > > > | | >
> > > > > > > > | | 0d88-4632-af98-8defb05ca6e2'} | > > > > > > > | created_at
> > > > > > > > | | |
> > > 2015-10-15T07:49:08+00:00 | > > > > > > > | driver_internal_info |
> > > {u'clean_steps': None} | > > > > > > > | chassis_uuid | | > > > > > > > |
> > > instance_info | {} | > > > > > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ironic
> > > node-show > > > > > > > 6f35ac24-135d-4b99-8a24-fa2b731bd218 > > > > > >
> > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > | Property | Value | > > > > > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > | target_power_state | None | > > > > > > > | extra | {} |
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > > > > | last_error | None | > > > > > > > | updated_at |
> > > 2015-10-15T08:26:42+00:00 | > > > > > > > | maintenance_reason | None | >
> > > >
> > > > > > > > | provision_state | available | > > > > > > > | clean_step | {}
> > > > > > > > | |
> > > > > > > > > > | uuid | 6f35ac24-135d-4b99-8a24-fa2b731bd218 | > > > > > >
> > > > > > > > > > | >
> > > | console_enabled | False | > > > > > > > | target_provision_state | None
> > > | |
> > > > > > > > > > | provision_updated_at | 2015-10-15T08:26:42+00:00 | > > >
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > | maintenance | False | > > > > > > > | inspection_started_at | None
> > > > > | |
> > > > > | >
> > > > > > > > > | inspection_finished_at | None | > > > > > > > | power_state
> > > > > > > > > | |
> > > power on | > > > > > > > | driver | pxe_ipmitool | > > > > > > > |
> > > reservation | None | > > > > > > > | properties | {u'memory_mb': u'8192',
> > > u'cpu_arch': u'x86_64', > > > > > > > | u'local_gb': > > > > > > > |
> > > u'100',
> > > | > > > > > > > | | u'cpus': u'4', u'capabilities': u'boot_option:local'}
> > > | > > > > > > > | | |
> > > > > > > > > > | instance_uuid | None | > > > > > > > | name | None | > >
> > > > > > > > > > | >
> > > > > > > > > > | >
> > > > > > | driver_info | {u'ipmi_password': u'******', u'ipmi_address': > >
> > > > > > | >
> > > > > > | >
> > > > > > | u'192.168.0.19', | > > > > > > > | | u'ipmi_username': u'root',
> > > u'deploy_kernel': > > > > > > > | | u'49a2c8d4-a283-4bdf-8d6f- > > > > >
> > > >
> > > >
> > > | | | > > > > > > > | | e83ae28da047', u'deploy_ramdisk': u'3db3dbed- | >
> > > | | | > > > > > > > | | >
> > > > > > > > | | 0d88-4632-af98-8defb05ca6e2'} | > > > > > > > | created_at
> > > > > > > > | | |
> > > 2015-10-15T07:49:08+00:00 | > > > > > > > | driver_internal_info |
> > > {u'clean_steps': None} | > > > > > > > | chassis_uuid | | > > > > > > > |
> > > instance_info | {} | > > > > > > >
> > > +------------------------+-------------------------------------------------------------------------+
> > > > > > > > > > [stack at undercloud ~]$ > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > And below I added my history for the stack user.
> > > > > > > > > > > > > > > I
> > > don't think I > > > > > > > am > > > > > > > doing > > > > > > >
> > > something
> > > other than > > > > > > >
> > > https://repos.fedorapeople.org/repos/openstack-m/rdo-manager-docs/liberty
> > > >
> > > > > > > > > doc > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1 vi instackenv.json
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > 2 sudo yum -y install epel-release > > > > > > > 3 sudo curl -o
> > > /etc/yum.repos.d/delorean.repo > > > > > > >
> > > http://trunk.rdoproject.org/centos7-liberty/current-passed-ci/delorean.repo
> > > > > > > > > > 4 sudo curl -o /etc/yum.repos.d/delorean-current.repo > > >
> > > > > > > > > > >
> > > > > > http://trunk.rdoproject.org/centos7-liberty/current/delorean.repo >
> > > > > > >
> > > > > > > > 5 sudo sed -i 's/\[delorean\]/\[delorean-current\]/' > > > > >
> > > > > > > > >
> > > > > > > > >
> > > /etc/yum.repos.d/delorean-current.repo > > > > > > > 6 sudo /bin/bash -c
> > > "cat > > > > > > > <<EOF>>/etc/yum.repos.d/delorean-current.repo > > > >
> > > >
> > > >
> > > > > > > > > > >
> > > includepkgs=diskimage-builder,openstack-heat,instack,instack-undercloud,openstack-ironic,openstack-ironic-inspector,os-cloud-config,os-net-config,python-ironic-inspector-client,python-tripleoclient,tripleo-common,openstack-tripleo-heat-templates,openstack-tripleo-image-elements,openstack-tuskar-ui-extras,openstack-puppet-modules
> > > > > > > > > > EOF" > > > > > > > 7 sudo curl -o
> > > /etc/yum.repos.d/delorean-deps.repo > > > > > > >
> > > http://trunk.rdoproject.org/centos7-liberty/delorean-deps.repo > > > > >
> > > >
> > > >
> > > 8 sudo yum -y install yum-plugin-priorities > > > > > > > 9 sudo yum
> > > install
> > > -y python-tripleoclient > > > > > > > 10 cp
> > > /usr/share/instack-undercloud/undercloud.conf.sample > > > > > > >
> > > ~/undercloud.conf > > > > > > > 11 vi undercloud.conf > > > > > > > 12
> > > export DIB_INSTALLTYPE_puppet_modules=source > > > > > > > 13 openstack
> > > undercloud install > > > > > > > 14 source stackrc > > > > > > > 15
> > > export
> > > NODE_DIST=centos7 > > > > > > > 16 export
> > > DIB_YUM_REPO_CONF="/etc/yum.repos.d/delorean.repo > > > > > > >
> > > /etc/yum.repos.d/delorean-deps.repo" > > > > > > > 17 export
> > > DIB_INSTALLTYPE_puppet_modules=source > > > > > > > 18 openstack
> > > overcloud
> > > image build --all > > > > > > > 19 ls > > > > > > > 20 openstack
> > > overcloud
> > > image upload > > > > > > > 21 openstack baremetal import --json
> > > instackenv.json > > > > > > > 22 openstack baremetal configure boot > > >
> > > >
> > > > > > 23 ironic node-list > > > > > > > 24 openstack baremetal
> > > > > > introspection
> > > bulk start > > > > > > > 25 ironic node-list > > > > > > > 26 ironic
> > > node-show 5b28998f-4dc8-42aa-8a51-521e20b1e5ed > > > > > > > 27 ironic
> > > node-show 6f35ac24-135d-4b99-8a24-fa2b731bd218 > > > > > > > 28 history >
> > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > Esra ÇELİK > > > > > > > TÜBİTAK BİLGEM > >
> > > > > > > > > > > > >
> > > > > > > www.bilgem.tubitak.gov.tr > > > > > > > celik.esra at tubitak.gov.tr
> > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Kimden: "Marius Cornea"
> > > <mcornea at redhat.com> > > > > > > > Kime: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr> > > > > > > > Kk: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > > > >
> > > Gönderilenler: 14 Ekim Çarşamba 2015 19:40:07 > > > > > > >
> > > Konu: Re: [Rdo-list] OverCloud deploy fails with error "No valid > > > >
> > > >
> > > >
> > > > host > > > > > > > was > > > > > > > found" > > > > > > > > > > > > > >
> > > Can you do ironic node-show for your ironic nodes and post the > > > > >
> > > >
> > > >
> > > results? > > > > > > > Also > > > > > > > check the following suggestion
> > > if
> > > you're experiencing the same > > > > > > > issue: > > > > > > >
> > > https://www.redhat.com/archives/rdo-list/2015-October/msg00174.html > > >
> > > >
> > > > > > > > > > > > > ----- Original Message ----- > > > > > > > > From:
> > > > > > > > > > > > > "Esra
> > > Celik" <celik.esra at tubitak.gov.tr> > > > > > > > > To: "Marius Cornea"
> > > <mcornea at redhat.com> > > > > > > > > Cc: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>, > > > > > > > > rdo-list at redhat.com > > > > > >
> > > >
> > > >
> > > Sent: Wednesday, October 14, 2015 3:22:20 PM > > > > > > > > Subject: Re:
> > > [Rdo-list] OverCloud deploy fails with error "No > > > > > > > > valid >
> > > >
> > > >
> > > > > > > > host > > > > > > > > was found" > > > > > > > > > > > > > > > >
> > > > > > > > >
> > > > > > > > > > > > > > > > > > Well in the early stage of the
> > > > > > > > > > > > > > > > > > introspection
> > > > > > > > > > > > > > > > > > I
> > > can see Client > > > > > > > > IP > > > > > > > > of > > > > > > > >
> > > nodes
> > > >
> > > > > > > > > > (screenshot attached). But then I see continuous > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > ironic-python-agent > > > > > > > > errors > > > > > > > >
> > > > (screenshot-2
> > > attached). Errors repeat after time out.. And the > > > > > > > > nodes >
> > > >
> > > > > > > > > are > > > > > > > > not powered off. > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > Seems like I am stuck in introspection stage.. > > > > > > > > > > >
> > > > > >
> > > > > >
> > > > > > I can use ipmitool command to successfully power on/off the > > > >
> > > > > > >
> > > > > > nodes > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > >
> > > [stack at undercloud ~]$ ipmitool -I lanplus -H 192.168.0.19 -L > > > > > >
> > > >
> > > >
> > > ADMINISTRATOR > > > > > > > > -U > > > > > > > > root -R 3 -N 5 -P
> > > <password> power status > > > > > > > > Chassis Power is on > > > > > > >
> > > >
> > > > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ipmitool -H
> > > 192.168.0.18 -I lanplus -U > > > > > > > > root > > > > > > > > -P > > >
> > > >
> > > >
> > > > > > <password> chassis power status > > > > > > > > Chassis Power is on
> > > > > > >
> > > > > > > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus
> > > > > > > > > > -U
> > > > > > > > > > >
> > > > > > > > > > root > > > > > > > > -P > > > > > > > > <password> chassis
> > > power off > > > > > > > > Chassis Power Control: Down/Off > > > > > > > >
> > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U > > > > > >
> > > >
> > > >
> > > root > > > > > > > > -P > > > > > > > > <password> chassis power status >
> > > >
> > > > > > > > > Chassis Power is off > > > > > > > > [stack at undercloud ~]$
> > > ipmitool -H 192.168.0.18 -I lanplus -U > > > > > > > > root > > > > > > >
> > > >
> > > -P > > > > > > > > <password> chassis power on > > > > > > > > Chassis
> > > Power
> > > Control: Up/On > > > > > > > > [stack at undercloud ~]$ ipmitool -H
> > > 192.168.0.18 -I lanplus -U > > > > > > > > root > > > > > > > > -P > > >
> > > >
> > > >
> > > > > > <password> chassis power status > > > > > > > > Chassis Power is on
> > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > Esra ÇELİK > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > TÜBİTAK BİLGEM > > > > > > > > www.bilgem.tubitak.gov.tr > > > >
> > > > > >
> > > > > > celik.esra at tubitak.gov.tr > > > > > > > > > > > > > > > > > > > > >
> > > > > > >
> > > > > ----- Orijinal Mesaj ----- > > > > > > > > > > > > > > > > Kimden:
> > > "Marius Cornea" <mcornea at redhat.com> > > > > > > > > Kime: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr> > > > > > > > > Kk: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>, > > > > > > > > rdo-list at redhat.com > > > > > >
> > > >
> > > >
> > > Gönderilenler: 14 Ekim Çarşamba 2015 14:59:30 > > > > > > > >
> > > Konu: Re: [Rdo-list] OverCloud deploy fails with error "No > > > > > > >
> > > >
> > > valid > > > > > > > > host > > > > > > > > was > > > > > > > > found" > >
> > > >
> > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- >
> > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > To: "Marius Cornea" <mcornea at redhat.com> > > > > > > > > > Cc: "Ignacio
> > > Bravo" <ibravo at ltgfederal.com>, > > > > > > > > > rdo-list at redhat.com > >
> > > >
> > > > > > > > > Sent: Wednesday, October 14, 2015 10:49:01 AM > > > > > > > >
> > > > > > > > > >
> > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No > > > > > >
> > > >
> > > > > valid > > > > > > > > > host > > > > > > > > > was found" > > > > > >
> > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Well today I started with
> > > re-installing the OS and nothing > > > > > > > > > seems > > > > > > > >
> > > >
> > > wrong > > > > > > > > > with > > > > > > > > > undercloud installation,
> > > then; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I see an error
> > > during image build > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > [stack at undercloud ~]$ openstack overcloud image build --all > > > > > > >
> > > >
> > > > ... > > > > > > > > > a lot of log > > > > > > > > > ... > > > > > > >
> > > > >
> > > > >
> > > ++ cat /etc/dib_dracut_drivers > > > > > > > > > + dracut -N --install '
> > > curl partprobe lsblk targetcli tail > > > > > > > > > head > > > > > > >
> > > >
> > > >
> > > awk > > > > > > > > > ifconfig > > > > > > > > > cut expr route ping nc
> > > wget
> > > tftp grep' --kernel-cmdline > > > > > > > > > 'rd.shell > > > > > > > > >
> > > rd.debug > > > > > > > > > rd.neednet=1 rd.driver.pre=ahci' --include > >
> > > >
> > > > > > > > > /var/tmp/image.YVhwuArQ/mnt/ > > > > > > > > > / > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > --kver 3.10.0-229.14.1.el7.x86_64 --add-drivers ' virtio > > > > > > >
> > > > >
> > > > >
> > > virtio_net > > > > > > > > > virtio_blk target_core_mod iscsi_target_mod
> > > >
> > > >
> > > > > > > > > > target_core_iblock > > > > > > > > > target_core_file
> > > target_core_pscsi configfs' -o 'dash > > > > > > > > > plymouth' > > > >
> > > >
> > > >
> > > > > > /tmp/ramdisk > > > > > > > > > cat: write error: Broken pipe > > >
> > > > > > >
> > > > > > >
> > > > > > > + cp /boot/vmlinuz-3.10.0-229.14.1.el7.x86_64 /tmp/kernel > > > >
> > > > > > > >
> > > > > > > + chmod o+r /tmp/kernel > > > > > > > > > + trap EXIT > > > > > >
> > > > > > > >
> > > > > + target_tag=99-build-dracut-ramdisk > > > > > > > > > + date +%s.%N
> > > > > >
> > > > > >
> > > > > > > > > > + output '99-build-dracut-ramdisk completed' > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > ... > > > > > > > > > a lot of log > > > > > > > > > ... > > > > > > > >
> > > >
> > > >
> > > > > > > > > You can ignore that afaik, if you end up having all the > > >
> > > > > > > > > >
> > > > > > > required > > > > > > > > images > > > > > > > > it > > > > > > >
> > > > > > > >
> > > should be ok. > > > > > > > > > > > > > > > > > > > > > > > > > > Then,
> > > during introspection stage I see ironic-python-agent > > > > > > > > >
> > > errors > > > > > > > > > on > > > > > > > > > nodes > > > > > > > > >
> > > (screenshot attached) and the following warnings > > > > > > > > > > > >
> > > >
> > > >
> > > > > > > > > > > > > > That looks odd. Is it showing up in the early stage
> > > > > > > > > > > > > > of
> > > the > > > > > > > > introspection? > > > > > > > > At > > > > > > > >
> > > some
> > > point it should receive an address by DHCP and the Network > > > > > > >
> > > >
> > > is > > > > > > > > unreachable error should disappear. Does the
> > > introspection > > > > > > > > complete > > > > > > > > and > > > > > > >
> > > >
> > > the > > > > > > > > nodes are turned off? > > > > > > > > > > > > > > > >
> > > >
> > > > > > > > > > > > > > > > > > > > > [root at localhost ~]# journalctl -fl -u
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > openstack-ironic-conductor.service > > > > > > > > > | >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > grep -i "warning\|error" > > > > > > > > > Oct 14 10:30:12
> > > undercloud.rdo ironic-conductor[619]: > > > > > > > > > 2015-10-14 > > >
> > > >
> > > >
> > > > > > > 10:30:12.119 > > > > > > > > > 619 WARNING oslo_config.cfg > > >
> > > > > > > >
> > > > > > > >
> > > > > > > [req-eccf8cb5-6e93-4d8f-9a05-0e8c8d2aab7b > > > > > > > > > ] > >
> > > > > > > >
> > > > > > > > > Option "http_url" from group "pxe" is deprecated. Use option
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > "http_url" > > > > > > > > > from > > > > > > > > > group
> > > "deploy". > > > > > > > > > Oct 14 10:30:12 undercloud.rdo
> > > ironic-conductor[619]: > > > > > > > > > 2015-10-14 > > > > > > > > >
> > > 10:30:12.119 > > > > > > > > > 619 WARNING oslo_config.cfg > > > > > > >
> > > >
> > > >
> > > [req-eccf8cb5-6e93-4d8f-9a05-0e8c8d2aab7b > > > > > > > > > ] > > > > > >
> > > >
> > > > > Option "http_root" from group "pxe" is deprecated. Use option > > > >
> > > > > >
> > > > > > > "http_root" > > > > > > > > > from group "deploy". > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > > > > > > > > > > > > > > Before deployment ironic node-list: >
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > This is odd too as I'm
> > > expecting the nodes to be powered off > > > > > > > > before > > > > > >
> > > >
> > > >
> > > running > > > > > > > > deployment. > > > > > > > > > > > > > > > > > > >
> > > >
> > > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ironic node-list > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > > > | UUID | Name | Instance UUID | Power State |
> > > > > > > > > > > > | Provisioning
> > > > > > > > > > > > | State > > > > > > > > > | | > > > > > > > > > |
> > > Maintenance | > > > > > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > > > | acfc1bb4-469d-479a-af70-c0bdd669b32d | None | None |
> > > power > > > > > > > > > | on > > > > > > > > > | | > > > > > > > > > |
> > > available > > > > > > > > > | | > > > > > > > > > | False | > > > > > > >
> > > >
> > > > | b5811c06-d5d1-41f1-87b3-2fd55ae63553 | None | None | power > > > > >
> > > > | >
> > > > | >
> > > > > | on > > > > > > > > > | | > > > > > > > > > | available > > > > > >
> > > > > | >
> > > > > | >
> > > > | | > > > > > > > > > | False | > > > > > > > > >
> > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+
> > > > > > > > > > > > > > > > > > > > > During deployment I get following
> > > > > > > > > > > > > > > > > > > > > errors
> > > > > > > > > > > > > > > > > > > > > [root at localhost ~]# journalctl -fl -u
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > openstack-ironic-conductor.service > > > > > > > > > | >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > grep -i "warning\|error" > > > > > > > > > Oct 14 11:29:01
> > > undercloud.rdo ironic-conductor[619]: > > > > > > > > > 2015-10-14 > > >
> > > >
> > > >
> > > > > > > 11:29:01.739 > > > > > > > > > 619 ERROR
> > > ironic.drivers.modules.ipmitool [-] IPMI Error > > > > > > > > > while >
> > > >
> > > >
> > > > > > > > > attempting > > > > > > > > > "ipmitool -I lanplus -H
> > > 192.168.0.19 -L ADMINISTRATOR -U root > > > > > > > > > -R > > > > > > >
> > > >
> > > >
> > > 3 > > > > > > > > > -N > > > > > > > > > 5 > > > > > > > > > -f > > > > >
> > > >
> > > > > > /tmp/tmpSCKHIv power status"for node > > > > > > > > >
> > > b5811c06-d5d1-41f1-87b3-2fd55ae63553. > > > > > > > > > Error: Unexpected
> > > error while running command. > > > > > > > > > Oct 14 11:29:01
> > > undercloud.rdo ironic-conductor[619]: > > > > > > > > > 2015-10-14 > > >
> > > >
> > > >
> > > > > > > 11:29:01.739 > > > > > > > > > 619 WARNING
> > > ironic.drivers.modules.ipmitool [-] IPMI power > > > > > > > > > status >
> > > >
> > > > > > > > > > failed > > > > > > > > > for > > > > > > > > > node
> > > b5811c06-d5d1-41f1-87b3-2fd55ae63553 with error: > > > > > > > > >
> > > Unexpected > > > > > > > > > error > > > > > > > > > while > > > > > > >
> > > >
> > > >
> > > running command. > > > > > > > > > Oct 14 11:29:01 undercloud.rdo
> > > ironic-conductor[619]: > > > > > > > > > 2015-10-14 > > > > > > > > >
> > > 11:29:01.740 > > > > > > > > > 619 WARNING ironic.conductor.manager [-]
> > > During > > > > > > > > > sync_power_state, > > > > > > > > > could > > >
> > > >
> > > >
> > > > > > > not > > > > > > > > > get power state for node > > > > > > > > >
> > > b5811c06-d5d1-41f1-87b3-2fd55ae63553, > > > > > > > > > attempt > > > > >
> > > >
> > > > > > 1 > > > > > > > > > of > > > > > > > > > 3. Error: IPMI call
> > > > > > failed:
> > > power status.. > > > > > > > > > > > > > > > > > > > > > > > > > This
> > > looks
> > > like an ipmi error, can you try to manually run > > > > > > > > commands
> > > >
> > > >
> > > > > > > > > using > > > > > > > > the > > > > > > > > ipmitool and see if
> > > you get any success? It's also worth filing > > > > > > > > a > > > > > >
> > > >
> > > > bug > > > > > > > > with > > > > > > > > details such as the ipmitool
> > > version, server model, drac > > > > > > > > firmware > > > > > > > >
> > > version. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > >
> > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks a lot > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----
> > > Orijinal Mesaj ----- > > > > > > > > > > > > > > > > > > Kimden: "Marius
> > > Cornea" <mcornea at redhat.com> > > > > > > > > > Kime: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr> > > > > > > > > > Kk: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>, > > > > > > > > > rdo-list at redhat.com > > > > >
> > > >
> > > >
> > > > > Gönderilenler: 13 Ekim Salı 2015 21:16:14 > > > > > > > > >
> > > > > Konu:
> > > Re: Yan: Re: [Rdo-list] OverCloud deploy fails with > > > > > > > > >
> > > error
> > > > > > > > > > > > "No > > > > > > > > > valid > > > > > > > > > host was
> > > found" > > > > > > > > > > > > > > > > > > > > > > > > > > > -----
> > > Original
> > > Message ----- > > > > > > > > > > From: "Esra Celik"
> > > <celik.esra at tubitak.gov.tr> > > > > > > > > > > To: "Marius Cornea"
> > > <mcornea at redhat.com> > > > > > > > > > > Cc: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>, > > > > > > > > > > rdo-list at redhat.com > > > >
> > > >
> > > >
> > > > > > > Sent: Tuesday, October 13, 2015 5:02:09 PM > > > > > > > > > >
> > > Subject: Yan: Re: [Rdo-list] OverCloud deploy fails with > > > > > > > >
> > > >
> > > >
> > > error > > > > > > > > > > "No > > > > > > > > > > valid > > > > > > > > >
> > > >
> > > host was found" > > > > > > > > > > > > > > > > > > > > During deployment
> > > they are powering on and deploying the > > > > > > > > > > images. > > >
> > > >
> > > >
> > > > > > > > I > > > > > > > > > > see > > > > > > > > > > lot > > > > > > >
> > > > > > > > >
> > > > > of > > > > > > > > > > connection error messages about
> > > ironic-python-agent but > > > > > > > > > > ignore > > > > > > > > > >
> > > them
> > > > > > > > > > > > > as > > > > > > > > > > mentioned here > > > > > > > >
> > > > > > > > > > > > > >
> > > > (https://www.redhat.com/archives/rdo-list/2015-October/msg00052.html) >
> > > > >
> > > > > > > > > > > > > > > > > > > That was referring to the introspection
> > > stage. From what I > > > > > > > > > can > > > > > > > > > tell > > > > >
> > > >
> > > > > > you > > > > > > > > > are > > > > > > > > > experiencing issues
> > > > > > during
> > > deployment as it fails to > > > > > > > > > provision > > > > > > > > >
> > > the
> > > > > > > > > > > > nova > > > > > > > > > instances, can you check if
> > > > > > > > > > > > during
> > > that stage the nodes get > > > > > > > > > powered > > > > > > > > > on?
> > > >
> > > >
> > > > > > > > > > > > > > > > > > > Make sure that before overcloud deploy
> > > > > > > > > > > > > > > > > > > the
> > > ironic nodes are > > > > > > > > > available > > > > > > > > > for > > >
> > > >
> > > >
> > > > > > > provisioning (ironic node-list and check the provisioning > > > >
> > > > > > > >
> > > > > > > state > > > > > > > > > column). > > > > > > > > > Also check
> > > > > > > that
> > > you didn't miss any step in the docs in > > > > > > > > > regards > > > >
> > > >
> > > > > > > to > > > > > > > > > kernel > > > > > > > > > and ramdisk
> > > assignment, introspection, flavor creation(so it > > > > > > > > >
> > > matches
> > > >
> > > > > > > > > > > the > > > > > > > > > nodes resources) > > > > > > > > >
> > > https://repos.fedorapeople.org/repos/openstack-m/rdo-manager-docs/liberty/basic_deployment/basic_deployment_cli.html
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > instackenv.json
> > > file I do not need to add the undercloud > > > > > > > > > > node, > > >
> > > >
> > > >
> > > > > > > > or > > > > > > > > > > do > > > > > > > > > > I? > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > > > No, the nodes details should be enough. > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > And which log files should I watch during deployment?
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > You can check the
> > > openstack-ironic-conductor logs(journalctl > > > > > > > > > -fl > > > >
> > > >
> > > >
> > > > > > -u > > > > > > > > > openstack-ironic-conductor.service) and the
> > > > > > logs
> > > in > > > > > > > > > /var/log/nova. > > > > > > > > > > > > > > > > > > >
> > > Thanks > > > > > > > > > > Esra > > > > > > > > > > > > > > > > > > > > >
> > > >
> > > > > > > > > > > ----- Orijinal Mesaj -----Kimden: Marius Cornea > > > > >
> > > > > > > > > > > >
> > > > > > > <mcornea at redhat.com>Kime: > > > > > > > > > > Esra Celik
> > > <celik.esra at tubitak.gov.tr>Kk: Ignacio Bravo > > > > > > > > > >
> > > <ibravo at ltgfederal.com>, > > > > > > > > > >
> > > rdo-list at redhat.comGönderilenler: > > > > > > > > > > Tue, > > > > >
> > > >
> > > > > > > 13 > > > > > > > > > > Oct > > > > > > > > > > 2015 17:25:00
> > > > > > > +0300
> > > (EEST)Konu: Re: [Rdo-list] OverCloud > > > > > > > > > > deploy > > > > >
> > > >
> > > > > > > fails > > > > > > > > > > with > > > > > > > > > > error "No
> > > > > > > valid
> > > host was found" > > > > > > > > > > > > > > > > > > > > ----- Original
> > > Message -----> From: "Esra Celik" > > > > > > > > > >
> > > <celik.esra at tubitak.gov.tr>> > > > > > > > > > > To: "Ignacio Bravo"
> > > <ibravo at ltgfederal.com>> Cc: > > > > > > > > > > rdo-list at redhat.com> > >
> > > >
> > > > > > > > > > Sent: > > > > > > > > > > Tuesday, October 13, 2015 3:47:57
> > > PM> Subject: Re: > > > > > > > > > > [Rdo-list] > > > > > > > > > >
> > > OverCloud > > > > > > > > > > deploy fails with error "No valid host was
> > > found"> > > > > > > > > > > > > > Actually > > > > > > > > > > I > > > >
> > > >
> > > >
> > > > > > > re-installed the OS for Undercloud before deploying. > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > However > > > > > > > > > > I > > > > > > > > > > did> > > > > > > >
> > > > > >
> > > > > >
> > > > not > > > > > > > > > > re-install the OS in Compute and Controller
> > > nodes.. I will > > > > > > > > > > reinstall> > > > > > > > > > > basic >
> > > >
> > > > > > > > > > > OS for them too, and retry.. > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > You don't need to reinstall the OS on the controller and > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > compute, > > > > > > > > > > they > > > > > > > > > > will > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > get the image served by the undercloud. I'd recommend that > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > during > > > > > > > > > > deployment > > > > > > > > > > you
> > > watch the servers console and make sure they get > > > > > > > > > >
> > > powered
> > > > > > > > > > > > > on, > > > > > > > > > > pxe > > > > > > > > > > boot,
> > > > > > > > > > > > > >
> > > > > > > > > > > > and actually get the image deployed. > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > Thanks>
> > > > > > > > > > > > >
> > > > > Esra ÇELİK> TÜBİTAK BİLGEM> > > > > > > > > > > >
> > > www.bilgem.tubitak.gov.tr> celik.esra at tubitak.gov.tr> > > > > > > > > > >
> > > >
> > > > > Kimden: > > > > > > > > > > > "Ignacio > > > > > > > > > > > Bravo"
> > > <ibravo at ltgfederal.com>> Kime: "Esra Celik" > > > > > > > > > > >
> > > <celik.esra at tubitak.gov.tr>> Kk: rdo-list at redhat.com> > > > > > > > > > >
> > > >
> > > Gönderilenler: > > > > > > > > > > > 13 Ekim Salı 2015 16:36:06>
> > > Konu:
> > > Re: [Rdo-list] > > > > > > > > > > > OverCloud > > > > > > > > > > >
> > > deploy
> > > > > > > > > > > > > > fails > > > > > > > > > > > with error "No valid
> > > > > > > > > > > > > > host
> > > was> found"> > Esra,> > I > > > > > > > > > > > encountered > > > > > > >
> > > >
> > > > > > the > > > > > > > > > > > same > > > > > > > > > > > problem after
> > > deleting the stack and re-deploying.> > It > > > > > > > > > > > turns >
> > > >
> > > >
> > > > > > > > > > > out > > > > > > > > > > > that > > > > > > > > > > >
> > > > > > > > > > > 'heat
> > > stack-delete overcloud’ does remove the nodes > > > > > > > > > > >
> > > from> > > > > > > > > > > > ‘nova list’ and one would assume
> > > that the > > > > > > > > > > > baremetal > > > > > > > > > > > servers >
> > > >
> > > >
> > > > > > > > > > > are now ready to> be used for the next stack, but when >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > redeploying, > > > > > > > > > > > I > > > > > > > > > >
> > > > > > > > > > > >
> > > get > > > > > > > > > > > the same message of> not enough hosts
> > > available.>
> > > > You > > > > > > > > > > > can > > > > > > > > > > > look > > > > > > >
> > > > >
> > > > >
> > > > > into > > > > > > > > > > > the > > > > > > > > > > > nova logs and it
> > > mentions something about ‘node xxx > > > > > > > > > > > is> > > >
> > > >
> > > >
> > > > > > > > > already > > > > > > > > > > > associated with UUID
> > > > > > > > > yyyy’
> > > and ‘I tried 3 > > > > > > > > > > > times > > > > > > > > > > >
> > > and
> > > >
> > > > > > > > > > > > > I’m > > > > > > > > > > > giving up’.>
> > > > > > > > > > > > > The
> > > issue is that the UUID yyyy > > > > > > > > > > > belonged > > > > > > >
> > > >
> > > >
> > > > > to > > > > > > > > > > > a > > > > > > > > > > > prior > > > > > > >
> > > > > >
> > > > > >
> > > > > unsuccessful deployment.> > I’m now redeploying the > > > > > >
> > > > > >
> > > > > > > basic > > > > > > > > > > > OS > > > > > > > > > > > to > > > > >
> > > > > > > >
> > > > > > > > start from scratch again.> > IB> > __> Ignacio Bravo> LTG > > >
> > > > > > > > >
> > > > > > > > > > Federal, > > > > > > > > > > > Inc> > > > > > > > > > > >
> > > www.ltgfederal.com> Office: (703) 951-7760> > > > On Oct > > > > > > > >
> > > >
> > > >
> > > > 13, > > > > > > > > > > > 2015, > > > > > > > > > > > at > > > > > > >
> > > > >
> > > > >
> > > > > 9:25 > > > > > > > > > > > AM, Esra Celik < celik.esra at tubitak.gov.tr
> > > > > >
> > > wrote:> > > > > > > > > > > > > > Hi > > > > > > > > > > > all,> > > > >
> > > >
> > > >
> > > > > > > > > > > > > > > > > > > > OverCloud deploy fails with error "No
> > > valid host was > > > > > > > > > > > found"> > > > > > > > > > > > > > >
> > > >
> > > >
> > > > > > > > > > [stack at undercloud ~]$ openstack overcloud deploy > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > --templates> > > > > > > > > > > > Deploying > > > > > > > > > >
> > > > > > > >
> > > templates in the directory> > > > > > > > > > > >
> > > /usr/share/openstack-tripleo-heat-templates> > > > > > > > > > > > Stack
> > > failed with status: Resource CREATE failed: > > > > > > > > > > >
> > > resources.Compute:> > > > > > > > > > > > ResourceInError:
> > > resources[0].resources.NovaCompute: Went > > > > > > > > > > > to > > > >
> > > >
> > > > > > > > > status > > > > > > > > > > > ERROR> > > > > > > > > > > > due
> > > > > > > > > to
> > > "Message: No valid host was found. There are not > > > > > > > > > > >
> > > enough > > > > > > > > > > > hosts> > > > > > > > > > > > available.,
> > > Code:
> > > 500"> Heat Stack create failed.> > Here > > > > > > > > > > > are > > > >
> > > >
> > > > > > > > > some > > > > > > > > > > > logs:> > > > > > > > > > > > >
> > > > > > > > > Every
> > > 2.0s: heat resource-list -n 5 overcloud | grep -v > > > > > > > > > > > >
> > > COMPLETE > > > > > > > > > > > > Tue > > > > > > > > > > > > Oct > > > >
> > > >
> > > >
> > > > > > > > 13> 16:18:17 2015> > > > > > > > > > > > >
> > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > | resource_name | physical_resource_id |
> > > > > > > > > > > > > > | resource_type
> > > | > > > > > > > > > > > | resource_status > > > > > > > > > > > |> |
> > > updated_time | stack_name |> > > > > > > > > > > >
> > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > | Compute | e33b6b1e-8740-4ded-ad7f-720617a03393 |
> > > > > > > > > > > > > > | >
> > > > > > > > > > > > > > | >
> > > > > > > > > > > > | OS::Heat::ResourceGroup > > > > > > > > > > > |> |
> > > CREATE_FAILED | 2015-10-13T10:20:36 | overcloud |> | > > > > > > > > > >
> > > >
> > > |> | Controller > > > > > > > > > > > |> | | > > > > > > > > > > >
> > > 116c57ff-debb-4c12-92e1-e4163b67dc17 | > > > > > > > > > > >
> > > OS::Heat::ResourceGroup> > > > > > > > > > > > | > > > > > > > > > > > |
> > > >
> > > >
> > > > > > > > > > > > CREATE_FAILED | 2015-10-13T10:20:36 | overcloud |> | 0
> > > > > > > > > > > > |
> > > > > > > > > > > > >
> > > > > > > > > > > > > 342a9023-de8f-4b5b-b3ec-498d99b56dc4 | > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > OS::TripleO::Controller > > > > > > > > > > > |> > > > > > > > > > >
> > > > > >
> > > > > |
> > > > > > > > > > > > > > CREATE_IN_PROGRESS | 2015-10-13T10:20:52 |> | > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > overcloud-Controller-45bbw24xxhxs |> | 0 | > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > e420a7bd-86f8-4cc1-b6a0-5ba8d1412453 | > > > > > > > > > > >
> > > OS::TripleO::Compute > > > > > > > > > > > |> > > > > > > > > > > > | > >
> > > >
> > > > > > > > > > > CREATE_FAILED | 2015-10-13T10:20:54 | > > > > > > > > > >
> > > > > > > > > > > >
> > > overcloud-Compute-vqk632ysg64r > > > > > > > > > > > |> > > > > > > > > >
> > > >
> > > > | > > > > > > > > > > > Controller |
> > > > | > > > > > > > > > > > 2e9ac712-0566-49b5-958f-c3e151bb24d7
> > > | > > > > > > > > > > > OS::Nova::Server > > > > > > > > > > > |> > > > >
> > > | > > > > > > > > > > > >
> > > > > > > > > | > > > > > > > > > > > CREATE_IN_PROGRESS |
> > > > > > > > > | > > > > > > > > > > > 2015-10-13T10:20:54
> > > |> | > > > > > > > > > > > overcloud-Controller-45bbw24xxhxs-0-3vyhjiak2rsk
> > > |> | > > > > > > > > > > > NovaCompute > > > > > > > > > > > | > > > > >
> > > |> | > > > > > > > > > > > >
> > > |> | > > > > > > > > > > > >
> > > > > > > 96efee56-81cb-46af-beef-84f4a3af761a | OS::Nova::Server > > > > >
> > > > > > > >
> > > > > > > > |> > > > > > > > > > > > | > > > > > > > > > > > CREATE_FAILED
> > > > > > > > |> > > > > > > > > > > > | > > > > > > > > > > > >
> > > > > > > > |> > > > > > > > > > > > | > > > > > > > > > > > >
> > > > > > > > > > > > | 2015-10-13T10:20:56 |> | > > > > > > > > > > > |
> > > overcloud-Compute-vqk632ysg64r-0-32nalzkofmef > > > > > > > > > > > |> >
> > > >
> > > >
> > > > > > > > > > >
> > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > > > [stack at undercloud ~]$ heat resource-show
> > > > > > > > > > > > > > > > overcloud
> > > > > > > > > > > > > > > > Compute> > > > > > > > > > > >
> > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > | Property | Value |> > > > > > > > > > > >
> > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > | attributes | { |> | | "attributes": null, |> | |
> > > > > > > > > > > > > > | >
> > > > > > > > > > > > > > | >
> > > > > > > > > > > > | "refs": > > > > > > > > > > > | null > > > > > > > >
> > > > > > > > > > > > | >
> > > > > > > > > > > > | >
> > > > | |> > > > > > > > > > > > | | > > > > > > > > > > > | | > > > > > > > > >
> > > > > | } > > > > > > > > > > > |> | creation_time | 2015-10-13T10:20:36 |>
> > > > > | |
> > > description > > > > > > > > > > > |> | | > > > > > > > > > > > |> | |> >
> > > >
> > > >
> > > > > > > > > > > |> | | > > > > > > > > > > > |> | links > > > > > > > > >
> > > > > > > > > > > |> | | > > > > > > > > > > > |> | >
> > > > |> | |> > > > > > > > > > > > | > > > > > > > > > > >
> > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud/620ada83-fb7d-4769-b1e8-431cfbb37d70/resources/Compute>
> > > > > > > > > > > > > > | (self) |> | | > > > > > > > > > > >
> > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud/620ada83-fb7d-4769-b1e8-431cfbb37d70>
> > > > > > > > > > > > > > | | (stack) |> | | > > > > > > > > > > >
> > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud-Compute-vqk632ysg64r/e33b6b1e-8740-4ded-ad7f-720617a03393>
> > > > > > > > > > > > > > | | (nested) |> | logical_resource_id | Compute |>
> > > > > > > > > > > > > > | | |
> > > > > > > > > > > > > > | | >
> > > > > > > > > > > > > | | physical_resource_id > > > > > > > > > > > |
> > > e33b6b1e-8740-4ded-ad7f-720617a03393 |> | required_by | > > > > > > > > >
> > > >
> > > > ComputeAllNodesDeployment |> | | > > > > > > > > > > >
> > > ComputeNodesPostDeployment > > > > > > > > > > > |> > > > > > > > > > > >
> > > |
> > > > > > > > > > > > > > | > > > > > > > > > > > ComputeCephDeployment |> |
> > > > > > > > > > > > > > | > > > > > > > > > > > |
> > > > > > > > > > > > > > | > > > > > > > > > > > >
> > > > > > > > > > > > > ComputeAllNodesValidationDeployment > > > > > > > > >
> > > > > > > > > > > > > >
> > > > |> > > > > > > > > > > > | > > > > > > > > > > > | > > > > > > > > > > >
> > > AllNodesExtraConfig |> | | allNodesConfig |> | > > > > > > > > > > >
> > > resource_name > > > > > > > > > > > | > > > > > > > > > > > Compute > > >
> > > >
> > > > > > > > > > |> > > > > > > > > > > > | resource_status | CREATE_FAILED
> > > > > > > > > > |> > > > > > > > > > > > | |>
> > > | > > > > > > > > > > > | resource_status_reason > > > > > > > > > > > |
> > > | > > > > > > > > > > > | |
> > > | > > > > > > > > > > > | >
> > > > > > > > > > > > > resources.Compute: ResourceInError:> | > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > resources[0].resources.NovaCompute: > > > > > > > > > > > Went to
> > > > > status
> > > ERROR due to "Message:> | No valid host > > > > > > > > > > > was > > > >
> > > >
> > > > > > > > > found. > > > > > > > > > > > There > > > > > > > > > > > are
> > > > > > > > > not
> > > enough hosts available., Code: 500"> | |> | > > > > > > > > > > >
> > > resource_type > > > > > > > > > > > | > > > > > > > > > > >
> > > OS::Heat::ResourceGroup |> | updated_time | > > > > > > > > > > >
> > > 2015-10-13T10:20:36 > > > > > > > > > > > |> > > > > > > > > > > >
> > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+>
> > > > > > > > > > > > > > > > > This is my instackenv.json for 1 compute and
> > > > > > > > > > > > > > > > > 1
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > control > > > > > > > > > > > > > > node > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > to > > > > > > > > > > > > > > be > > > > > > > > > > >
> > > deployed.> > {> "nodes": [> {> "pm_type":"pxe_ipmitool",> > > > > > > > >
> > > >
> > > > > "mac":[> > > > > > > > > > > > "08:9E:01:58:CC:A1"> ],> "cpu":"4",>
> > > "memory":"8192",> > > > > > > > > > > > "disk":"10",> > > > > > > > > > >
> > > >
> > > "arch":"x86_64",> "pm_user":"root",> > > > > > > > > > > >
> > > "pm_password":"calvin",> > > > > > > > > > > > "pm_addr":"192.168.0.18">
> > > },>
> > > {> > > > > > > > > > > > "pm_type":"pxe_ipmitool",> > > > > > > > > > > >
> > > "mac":[> > > > > > > > > > > > "08:9E:01:58:D0:3D"> ],> "cpu":"4",>
> > > "memory":"8192",> > > > > > > > > > > > "disk":"100",> > > > > > > > > >
> > > >
> > > >
> > > "arch":"x86_64",> "pm_user":"root",> > > > > > > > > > > >
> > > "pm_password":"calvin",> > > > > > > > > > > > "pm_addr":"192.168.0.19">
> > > }>
> > > ]> }> > > Any ideas? Thanks > > > > > > > > > > > in > > > > > > > > > >
> > > >
> > > advance> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > >
> > > >
> > > > Esra ÇELİK> TÜBİTAK BİLGEM> > > > > > > > > > > >
> > > www.bilgem.tubitak.gov.tr> > > > > > > > > > > >
> > > celik.esra at tubitak.gov.tr>
> > > > > > > > > > > > > > > _______________________________________________>
> > > Rdo-list > > > > > > > > > > > mailing > > > > > > > > > > > list> > > >
> > > >
> > > >
> > > > > > > > > Rdo-list at redhat.com> > > > > > > > > > > >
> > > https://www.redhat.com/mailman/listinfo/rdo-list> > > > > > > > > > > > >
> > > >
> > > > > > > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com> > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > _______________________________________________>
> > > Rdo-list > > > > > > > > > > > mailing > > > > > > > > > > > list> > > >
> > > >
> > > >
> > > > > > > > > Rdo-list at redhat.com> > > > > > > > > > > >
> > > https://www.redhat.com/mailman/listinfo/rdo-list> > > > > > > > > > > > >
> > > >
> > > > > > > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > >
> > > _______________________________________________ > > > > > > > Rdo-list
> > > mailing list > > > > > > > Rdo-list at redhat.com > > > > > > >
> > > https://www.redhat.com/mailman/listinfo/rdo-list > > > > > > > > > > > >
> > > >
> > > >
> > > To unsubscribe: rdo-list-unsubscribe at redhat.com > > > > > > > > >
>