[Rdo-list] Yan: Re: OverCloud deploy fails with error "No valid host was found"

Esra Celik celik.esra at tubitak.gov.tr
Fri Oct 16 17:33:18 UTC 2015



Thanks but I will not be able to try it until monday.
I will send the results then..


Esra ÇELİK
TÜBİTAK BİLGEM
www.bilgem.tubitak.gov.tr
celik.esra at tubitak.gov.tr


----- Sasha Chuzhoy <sasha at redhat.com> şöyle yazıyor:> Hi Esra, if the undercloud nodes are UP - you can login with: ssh heat-admin@<IP> You can see the IP of the nodes with: "nova list". BTW, What do you see if you run "sudo systemctl|grep ironic" on the undercloud? Best regards, Sasha Chuzhoy. ----- Original Message ----- > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > To: "Sasha Chuzhoy" <sasha at redhat.com> > Cc: "Marius Cornea" <mcornea at redhat.com>, rdo-list at redhat.com > Sent: Friday, October 16, 2015 1:40:16 AM > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid host was found" > > Hi Sasha, > > I have 3 nodes, 1 Undercloud, 1 Overcloud-Controller, 1 Overcloud-Compute > > This is my undercloud.conf file: > > image_path = . > local_ip = 192.0.2.1/24 > local_interface = em2 > masquerade_network = 192.0.2.0/24 > dhcp_start = 192.0.2.5 > dhcp_end = 192.0.2.24 > network_cidr = 192.0.2.0/24 > network_gateway = 192.0.2.1 > inspection_interface = br-ctlplane > inspection_iprange = 192.0.2.100,192.0.2.120 > inspection_runbench = false > undercloud_debug = true > enable_tuskar = false > enable_tempest = false > > IP configuration for the Undercloud is as follows: > > stack at undercloud ~]$ ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen > 1000 > link/ether 08:9e:01:50:8a:21 brd ff:ff:ff:ff:ff:ff > inet 10.1.34.81/24 brd 10.1.34.255 scope global em1 > valid_lft forever preferred_lft forever > inet6 fe80::a9e:1ff:fe50:8a21/64 scope link > valid_lft forever preferred_lft forever > 3: em2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovs-system > state UP qlen 1000 > link/ether 08:9e:01:50:8a:22 brd ff:ff:ff:ff:ff:ff > 4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > link/ether 9a:a8:0f:ec:42:15 brd ff:ff:ff:ff:ff:ff > 5: br-ctlplane: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue > state UNKNOWN > link/ether 08:9e:01:50:8a:22 brd ff:ff:ff:ff:ff:ff > inet 192.0.2.1/24 brd 192.0.2.255 scope global br-ctlplane > valid_lft forever preferred_lft forever > inet6 fe80::a9e:1ff:fe50:8a22/64 scope link > valid_lft forever preferred_lft forever > 6: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > link/ether fa:85:ac:92:f5:41 brd ff:ff:ff:ff:ff:ff > > And I attached two screenshots showing the boot stage for overcloud nodes > > Is there a way to login the overcloud nodes to see their IP configuration? > > Thanks > > Esra ÇELİK > TÜBİTAK BİLGEM > www.bilgem.tubitak.gov.tr > celik.esra at tubitak.gov.tr > > ----- Orijinal Mesaj ----- > > > Kimden: "Sasha Chuzhoy" <sasha at redhat.com> > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > Kk: "Marius Cornea" <mcornea at redhat.com>, rdo-list at redhat.com > > Gönderilenler: 15 Ekim Perşembe 2015 16:58:41 > > Konu: Re: [Rdo-list] OverCloud deploy fails with error "No valid host was > > found" > > > Just my 2 cents. > > Did you make sure that all the registered nodes are configured to boot off > > the right NIC first? > > Can you watch the console and see what happens on the problematic nodes > > upon > > boot? > > > Best regards, > > Sasha Chuzhoy. > > > ----- Original Message ----- > > > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > To: "Marius Cornea" <mcornea at redhat.com> > > > Cc: rdo-list at redhat.com > > > Sent: Thursday, October 15, 2015 4:40:46 AM > > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid host > > > was found" > > > > > > > > > Sorry for the late reply > > > > > > ironic node-show results are below. I have my nodes power on after > > > introspection bulk start. And I get the following warning > > > Introspection didn't finish for nodes > > > 5b28998f-4dc8-42aa-8a51-521e20b1e5ed,6f35ac24-135d-4b99-8a24-fa2b731bd218 > > > > > > Doesn't seem to be the same issue with > > > https://www.redhat.com/archives/rdo-list/2015-October/msg00174.html > > > > > > > > > > > > > > > [stack at undercloud ~]$ ironic node-list > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > | UUID | Name | Instance UUID | Power State | Provisioning State | > > > | Maintenance | > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > | 5b28998f-4dc8-42aa-8a51-521e20b1e5ed | None | None | power on | > > > | available > > > | | > > > | False | > > > | 6f35ac24-135d-4b99-8a24-fa2b731bd218 | None | None | power on | > > > | available > > > | | > > > | False | > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > > > > > > > [stack at undercloud ~]$ ironic node-show > > > 5b28998f-4dc8-42aa-8a51-521e20b1e5ed > > > +------------------------+-------------------------------------------------------------------------+ > > > | Property | Value | > > > +------------------------+-------------------------------------------------------------------------+ > > > | target_power_state | None | > > > | extra | {} | > > > | last_error | None | > > > | updated_at | 2015-10-15T08:26:42+00:00 | > > > | maintenance_reason | None | > > > | provision_state | available | > > > | clean_step | {} | > > > | uuid | 5b28998f-4dc8-42aa-8a51-521e20b1e5ed | > > > | console_enabled | False | > > > | target_provision_state | None | > > > | provision_updated_at | 2015-10-15T08:26:42+00:00 | > > > | maintenance | False | > > > | inspection_started_at | None | > > > | inspection_finished_at | None | > > > | power_state | power on | > > > | driver | pxe_ipmitool | > > > | reservation | None | > > > | properties | {u'memory_mb': u'8192', u'cpu_arch': u'x86_64', > > > | u'local_gb': > > > | u'10', | > > > | | u'cpus': u'4', u'capabilities': u'boot_option:local'} | > > > | instance_uuid | None | > > > | name | None | > > > | driver_info | {u'ipmi_password': u'******', u'ipmi_address': > > > | u'192.168.0.18', | > > > | | u'ipmi_username': u'root', u'deploy_kernel': > > > | | u'49a2c8d4-a283-4bdf-8d6f- > > > | | | > > > | | e83ae28da047', u'deploy_ramdisk': u'3db3dbed- | > > > | | 0d88-4632-af98-8defb05ca6e2'} | > > > | created_at | 2015-10-15T07:49:08+00:00 | > > > | driver_internal_info | {u'clean_steps': None} | > > > | chassis_uuid | | > > > | instance_info | {} | > > > +------------------------+-------------------------------------------------------------------------+ > > > > > > > > > [stack at undercloud ~]$ ironic node-show > > > 6f35ac24-135d-4b99-8a24-fa2b731bd218 > > > +------------------------+-------------------------------------------------------------------------+ > > > | Property | Value | > > > +------------------------+-------------------------------------------------------------------------+ > > > | target_power_state | None | > > > | extra | {} | > > > | last_error | None | > > > | updated_at | 2015-10-15T08:26:42+00:00 | > > > | maintenance_reason | None | > > > | provision_state | available | > > > | clean_step | {} | > > > | uuid | 6f35ac24-135d-4b99-8a24-fa2b731bd218 | > > > | console_enabled | False | > > > | target_provision_state | None | > > > | provision_updated_at | 2015-10-15T08:26:42+00:00 | > > > | maintenance | False | > > > | inspection_started_at | None | > > > | inspection_finished_at | None | > > > | power_state | power on | > > > | driver | pxe_ipmitool | > > > | reservation | None | > > > | properties | {u'memory_mb': u'8192', u'cpu_arch': u'x86_64', > > > | u'local_gb': > > > | u'100', | > > > | | u'cpus': u'4', u'capabilities': u'boot_option:local'} | > > > | instance_uuid | None | > > > | name | None | > > > | driver_info | {u'ipmi_password': u'******', u'ipmi_address': > > > | u'192.168.0.19', | > > > | | u'ipmi_username': u'root', u'deploy_kernel': > > > | | u'49a2c8d4-a283-4bdf-8d6f- > > > | | | > > > | | e83ae28da047', u'deploy_ramdisk': u'3db3dbed- | > > > | | 0d88-4632-af98-8defb05ca6e2'} | > > > | created_at | 2015-10-15T07:49:08+00:00 | > > > | driver_internal_info | {u'clean_steps': None} | > > > | chassis_uuid | | > > > | instance_info | {} | > > > +------------------------+-------------------------------------------------------------------------+ > > > [stack at undercloud ~]$ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And below I added my history for the stack user. I don't think I am doing > > > something other than > > > https://repos.fedorapeople.org/repos/openstack-m/rdo-manager-docs/liberty > > > doc > > > > > > > > > > > > > > > > > > > > > > > > 1 vi instackenv.json > > > 2 sudo yum -y install epel-release > > > 3 sudo curl -o /etc/yum.repos.d/delorean.repo > > > http://trunk.rdoproject.org/centos7-liberty/current-passed-ci/delorean.repo > > > 4 sudo curl -o /etc/yum.repos.d/delorean-current.repo > > > http://trunk.rdoproject.org/centos7-liberty/current/delorean.repo > > > 5 sudo sed -i 's/\[delorean\]/\[delorean-current\]/' > > > /etc/yum.repos.d/delorean-current.repo > > > 6 sudo /bin/bash -c "cat <<EOF>>/etc/yum.repos.d/delorean-current.repo > > > > > > includepkgs=diskimage-builder,openstack-heat,instack,instack-undercloud,openstack-ironic,openstack-ironic-inspector,os-cloud-config,os-net-config,python-ironic-inspector-client,python-tripleoclient,tripleo-common,openstack-tripleo-heat-templates,openstack-tripleo-image-elements,openstack-tuskar-ui-extras,openstack-puppet-modules > > > EOF" > > > 7 sudo curl -o /etc/yum.repos.d/delorean-deps.repo > > > http://trunk.rdoproject.org/centos7-liberty/delorean-deps.repo > > > 8 sudo yum -y install yum-plugin-priorities > > > 9 sudo yum install -y python-tripleoclient > > > 10 cp /usr/share/instack-undercloud/undercloud.conf.sample > > > ~/undercloud.conf > > > 11 vi undercloud.conf > > > 12 export DIB_INSTALLTYPE_puppet_modules=source > > > 13 openstack undercloud install > > > 14 source stackrc > > > 15 export NODE_DIST=centos7 > > > 16 export DIB_YUM_REPO_CONF="/etc/yum.repos.d/delorean.repo > > > /etc/yum.repos.d/delorean-deps.repo" > > > 17 export DIB_INSTALLTYPE_puppet_modules=source > > > 18 openstack overcloud image build --all > > > 19 ls > > > 20 openstack overcloud image upload > > > 21 openstack baremetal import --json instackenv.json > > > 22 openstack baremetal configure boot > > > 23 ironic node-list > > > 24 openstack baremetal introspection bulk start > > > 25 ironic node-list > > > 26 ironic node-show 5b28998f-4dc8-42aa-8a51-521e20b1e5ed > > > 27 ironic node-show 6f35ac24-135d-4b99-8a24-fa2b731bd218 > > > 28 history > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > Esra ÇELİK > > > TÜBİTAK BİLGEM > > > www.bilgem.tubitak.gov.tr > > > celik.esra at tubitak.gov.tr > > > > > > > > > Kimden: "Marius Cornea" <mcornea at redhat.com> > > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > Kk: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > Gönderilenler: 14 Ekim Çarşamba 2015 19:40:07 > > > Konu: Re: [Rdo-list] OverCloud deploy fails with error "No valid host was > > > found" > > > > > > Can you do ironic node-show for your ironic nodes and post the results? > > > Also > > > check the following suggestion if you're experiencing the same issue: > > > https://www.redhat.com/archives/rdo-list/2015-October/msg00174.html > > > > > > ----- Original Message ----- > > > > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > To: "Marius Cornea" <mcornea at redhat.com> > > > > Cc: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > Sent: Wednesday, October 14, 2015 3:22:20 PM > > > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid > > > > host > > > > was found" > > > > > > > > > > > > > > > > Well in the early stage of the introspection I can see Client IP of > > > > nodes > > > > (screenshot attached). But then I see continuous ironic-python-agent > > > > errors > > > > (screenshot-2 attached). Errors repeat after time out.. And the nodes > > > > are > > > > not powered off. > > > > > > > > Seems like I am stuck in introspection stage.. > > > > > > > > I can use ipmitool command to successfully power on/off the nodes > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ipmitool -I lanplus -H 192.168.0.19 -L > > > > ADMINISTRATOR > > > > -U > > > > root -R 3 -N 5 -P <password> power status > > > > Chassis Power is on > > > > > > > > > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U root -P > > > > <password> chassis power status > > > > Chassis Power is on > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U root -P > > > > <password> chassis power off > > > > Chassis Power Control: Down/Off > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U root -P > > > > <password> chassis power status > > > > Chassis Power is off > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U root -P > > > > <password> chassis power on > > > > Chassis Power Control: Up/On > > > > [stack at undercloud ~]$ ipmitool -H 192.168.0.18 -I lanplus -U root -P > > > > <password> chassis power status > > > > Chassis Power is on > > > > > > > > > > > > Esra ÇELİK > > > > TÜBİTAK BİLGEM > > > > www.bilgem.tubitak.gov.tr > > > > celik.esra at tubitak.gov.tr > > > > > > > > > > > > ----- Orijinal Mesaj ----- > > > > > > > > Kimden: "Marius Cornea" <mcornea at redhat.com> > > > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > Kk: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > Gönderilenler: 14 Ekim Çarşamba 2015 14:59:30 > > > > Konu: Re: [Rdo-list] OverCloud deploy fails with error "No valid host > > > > was > > > > found" > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > > To: "Marius Cornea" <mcornea at redhat.com> > > > > > Cc: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > > Sent: Wednesday, October 14, 2015 10:49:01 AM > > > > > Subject: Re: [Rdo-list] OverCloud deploy fails with error "No valid > > > > > host > > > > > was found" > > > > > > > > > > > > > > > Well today I started with re-installing the OS and nothing seems > > > > > wrong > > > > > with > > > > > undercloud installation, then; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I see an error during image build > > > > > > > > > > > > > > > [stack at undercloud ~]$ openstack overcloud image build --all > > > > > ... > > > > > a lot of log > > > > > ... > > > > > ++ cat /etc/dib_dracut_drivers > > > > > + dracut -N --install ' curl partprobe lsblk targetcli tail head awk > > > > > ifconfig > > > > > cut expr route ping nc wget tftp grep' --kernel-cmdline 'rd.shell > > > > > rd.debug > > > > > rd.neednet=1 rd.driver.pre=ahci' --include > > > > > /var/tmp/image.YVhwuArQ/mnt/ > > > > > / > > > > > --kver 3.10.0-229.14.1.el7.x86_64 --add-drivers ' virtio virtio_net > > > > > virtio_blk target_core_mod iscsi_target_mod target_core_iblock > > > > > target_core_file target_core_pscsi configfs' -o 'dash plymouth' > > > > > /tmp/ramdisk > > > > > cat: write error: Broken pipe > > > > > + cp /boot/vmlinuz-3.10.0-229.14.1.el7.x86_64 /tmp/kernel > > > > > + chmod o+r /tmp/kernel > > > > > + trap EXIT > > > > > + target_tag=99-build-dracut-ramdisk > > > > > + date +%s.%N > > > > > + output '99-build-dracut-ramdisk completed' > > > > > ... > > > > > a lot of log > > > > > ... > > > > > > > > You can ignore that afaik, if you end up having all the required images > > > > it > > > > should be ok. > > > > > > > > > > > > > > Then, during introspection stage I see ironic-python-agent errors on > > > > > nodes > > > > > (screenshot attached) and the following warnings > > > > > > > > > > > > > That looks odd. Is it showing up in the early stage of the > > > > introspection? > > > > At > > > > some point it should receive an address by DHCP and the Network is > > > > unreachable error should disappear. Does the introspection complete and > > > > the > > > > nodes are turned off? > > > > > > > > > > > > > > > > > > > [root at localhost ~]# journalctl -fl -u > > > > > openstack-ironic-conductor.service > > > > > | > > > > > grep -i "warning\|error" > > > > > Oct 14 10:30:12 undercloud.rdo ironic-conductor[619]: 2015-10-14 > > > > > 10:30:12.119 > > > > > 619 WARNING oslo_config.cfg [req-eccf8cb5-6e93-4d8f-9a05-0e8c8d2aab7b > > > > > ] > > > > > Option "http_url" from group "pxe" is deprecated. Use option > > > > > "http_url" > > > > > from > > > > > group "deploy". > > > > > Oct 14 10:30:12 undercloud.rdo ironic-conductor[619]: 2015-10-14 > > > > > 10:30:12.119 > > > > > 619 WARNING oslo_config.cfg [req-eccf8cb5-6e93-4d8f-9a05-0e8c8d2aab7b > > > > > ] > > > > > Option "http_root" from group "pxe" is deprecated. Use option > > > > > "http_root" > > > > > from group "deploy". > > > > > > > > > > > > > > > Before deployment ironic node-list: > > > > > > > > > > > > > This is odd too as I'm expecting the nodes to be powered off before > > > > running > > > > deployment. > > > > > > > > > > > > > > > > > > > [stack at undercloud ~]$ ironic node-list > > > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > > > | UUID | Name | Instance UUID | Power State | Provisioning State | > > > > > | Maintenance | > > > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > > > | acfc1bb4-469d-479a-af70-c0bdd669b32d | None | None | power on | > > > > > | available > > > > > | | > > > > > | False | > > > > > | b5811c06-d5d1-41f1-87b3-2fd55ae63553 | None | None | power on | > > > > > | available > > > > > | | > > > > > | False | > > > > > +--------------------------------------+------+---------------+-------------+--------------------+-------------+ > > > > > > > > > > During deployment I get following errors > > > > > > > > > > [root at localhost ~]# journalctl -fl -u > > > > > openstack-ironic-conductor.service > > > > > | > > > > > grep -i "warning\|error" > > > > > Oct 14 11:29:01 undercloud.rdo ironic-conductor[619]: 2015-10-14 > > > > > 11:29:01.739 > > > > > 619 ERROR ironic.drivers.modules.ipmitool [-] IPMI Error while > > > > > attempting > > > > > "ipmitool -I lanplus -H 192.168.0.19 -L ADMINISTRATOR -U root -R 3 -N > > > > > 5 > > > > > -f > > > > > /tmp/tmpSCKHIv power status"for node > > > > > b5811c06-d5d1-41f1-87b3-2fd55ae63553. > > > > > Error: Unexpected error while running command. > > > > > Oct 14 11:29:01 undercloud.rdo ironic-conductor[619]: 2015-10-14 > > > > > 11:29:01.739 > > > > > 619 WARNING ironic.drivers.modules.ipmitool [-] IPMI power status > > > > > failed > > > > > for > > > > > node b5811c06-d5d1-41f1-87b3-2fd55ae63553 with error: Unexpected > > > > > error > > > > > while > > > > > running command. > > > > > Oct 14 11:29:01 undercloud.rdo ironic-conductor[619]: 2015-10-14 > > > > > 11:29:01.740 > > > > > 619 WARNING ironic.conductor.manager [-] During sync_power_state, > > > > > could > > > > > not > > > > > get power state for node b5811c06-d5d1-41f1-87b3-2fd55ae63553, > > > > > attempt > > > > > 1 > > > > > of > > > > > 3. Error: IPMI call failed: power status.. > > > > > > > > > > > > > This looks like an ipmi error, can you try to manually run commands > > > > using > > > > the > > > > ipmitool and see if you get any success? It's also worth filing a bug > > > > with > > > > details such as the ipmitool version, server model, drac firmware > > > > version. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks a lot > > > > > > > > > > > > > > > > > > > > ----- Orijinal Mesaj ----- > > > > > > > > > > Kimden: "Marius Cornea" <mcornea at redhat.com> > > > > > Kime: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > > Kk: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > > Gönderilenler: 13 Ekim Salı 2015 21:16:14 > > > > > Konu: Re: Yan: Re: [Rdo-list] OverCloud deploy fails with error "No > > > > > valid > > > > > host was found" > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Esra Celik" <celik.esra at tubitak.gov.tr> > > > > > > To: "Marius Cornea" <mcornea at redhat.com> > > > > > > Cc: "Ignacio Bravo" <ibravo at ltgfederal.com>, rdo-list at redhat.com > > > > > > Sent: Tuesday, October 13, 2015 5:02:09 PM > > > > > > Subject: Yan: Re: [Rdo-list] OverCloud deploy fails with error "No > > > > > > valid > > > > > > host was found" > > > > > > > > > > > > During deployment they are powering on and deploying the images. I > > > > > > see > > > > > > lot > > > > > > of > > > > > > connection error messages about ironic-python-agent but ignore them > > > > > > as > > > > > > mentioned here > > > > > > (https://www.redhat.com/archives/rdo-list/2015-October/msg00052.html) > > > > > > > > > > That was referring to the introspection stage. From what I can tell > > > > > you > > > > > are > > > > > experiencing issues during deployment as it fails to provision the > > > > > nova > > > > > instances, can you check if during that stage the nodes get powered > > > > > on? > > > > > > > > > > Make sure that before overcloud deploy the ironic nodes are available > > > > > for > > > > > provisioning (ironic node-list and check the provisioning state > > > > > column). > > > > > Also check that you didn't miss any step in the docs in regards to > > > > > kernel > > > > > and ramdisk assignment, introspection, flavor creation(so it matches > > > > > the > > > > > nodes resources) > > > > > https://repos.fedorapeople.org/repos/openstack-m/rdo-manager-docs/liberty/basic_deployment/basic_deployment_cli.html > > > > > > > > > > > > > > > > In instackenv.json file I do not need to add the undercloud node, > > > > > > or > > > > > > do > > > > > > I? > > > > > > > > > > No, the nodes details should be enough. > > > > > > > > > > > And which log files should I watch during deployment? > > > > > > > > > > You can check the openstack-ironic-conductor logs(journalctl -fl -u > > > > > openstack-ironic-conductor.service) and the logs in /var/log/nova. > > > > > > > > > > > Thanks > > > > > > Esra > > > > > > > > > > > > > > > > > > ----- Orijinal Mesaj -----Kimden: Marius Cornea > > > > > > <mcornea at redhat.com>Kime: > > > > > > Esra Celik <celik.esra at tubitak.gov.tr>Kk: Ignacio Bravo > > > > > > <ibravo at ltgfederal.com>, rdo-list at redhat.comGönderilenler: > > > > > > Tue, > > > > > > 13 > > > > > > Oct > > > > > > 2015 17:25:00 +0300 (EEST)Konu: Re: [Rdo-list] OverCloud deploy > > > > > > fails > > > > > > with > > > > > > error "No valid host was found" > > > > > > > > > > > > ----- Original Message -----> From: "Esra Celik" > > > > > > <celik.esra at tubitak.gov.tr>> > > > > > > To: "Ignacio Bravo" <ibravo at ltgfederal.com>> Cc: > > > > > > rdo-list at redhat.com> > > > > > > Sent: > > > > > > Tuesday, October 13, 2015 3:47:57 PM> Subject: Re: [Rdo-list] > > > > > > OverCloud > > > > > > deploy fails with error "No valid host was found"> > > > Actually I > > > > > > re-installed the OS for Undercloud before deploying. However I did> > > > > > > not > > > > > > re-install the OS in Compute and Controller nodes.. I will > > > > > > reinstall> > > > > > > basic > > > > > > OS for them too, and retry.. > > > > > > > > > > > > You don't need to reinstall the OS on the controller and compute, > > > > > > they > > > > > > will > > > > > > get the image served by the undercloud. I'd recommend that during > > > > > > deployment > > > > > > you watch the servers console and make sure they get powered on, > > > > > > pxe > > > > > > boot, > > > > > > and actually get the image deployed. > > > > > > > > > > > > Thanks > > > > > > > > > > > > > Thanks> > > > Esra ÇELİK> TÜBİTAK BİLGEM> > > > > > > > www.bilgem.tubitak.gov.tr> celik.esra at tubitak.gov.tr> > > Kimden: > > > > > > > "Ignacio > > > > > > > Bravo" <ibravo at ltgfederal.com>> Kime: "Esra Celik" > > > > > > > <celik.esra at tubitak.gov.tr>> Kk: rdo-list at redhat.com> > > > > > > > Gönderilenler: > > > > > > > 13 Ekim Salı 2015 16:36:06> Konu: Re: [Rdo-list] OverCloud deploy > > > > > > > fails > > > > > > > with error "No valid host was> found"> > Esra,> > I encountered > > > > > > > the > > > > > > > same > > > > > > > problem after deleting the stack and re-deploying.> > It turns > > > > > > > out > > > > > > > that > > > > > > > 'heat stack-delete overcloud’ does remove the nodes from> > > > > > > > ‘nova list’ and one would assume that the baremetal > > > > > > > servers > > > > > > > are now ready to> be used for the next stack, but when > > > > > > > redeploying, > > > > > > > I > > > > > > > get > > > > > > > the same message of> not enough hosts available.> > You can look > > > > > > > into > > > > > > > the > > > > > > > nova logs and it mentions something about ‘node xxx is> > > > > > > > already > > > > > > > associated with UUID yyyy’ and ‘I tried 3 times and > > > > > > > I’m > > > > > > > giving up’.> The issue is that the UUID yyyy belonged to a > > > > > > > prior > > > > > > > unsuccessful deployment.> > I’m now redeploying the basic > > > > > > > OS > > > > > > > to > > > > > > > start from scratch again.> > IB> > __> Ignacio Bravo> LTG > > > > > > > Federal, > > > > > > > Inc> > > > > > > > www.ltgfederal.com> Office: (703) 951-7760> > > > On Oct 13, > > > > > > > 2015, > > > > > > > at > > > > > > > 9:25 > > > > > > > AM, Esra Celik < celik.esra at tubitak.gov.tr > wrote:> > > Hi all,> > > > > > > > > > > > > > > > OverCloud deploy fails with error "No valid host was found"> > > > > > > > > [stack at undercloud ~]$ openstack overcloud deploy --templates> > > > > > > > Deploying > > > > > > > templates in the directory> > > > > > > > /usr/share/openstack-tripleo-heat-templates> > > > > > > > Stack failed with status: Resource CREATE failed: > > > > > > > resources.Compute:> > > > > > > > ResourceInError: resources[0].resources.NovaCompute: Went to > > > > > > > status > > > > > > > ERROR> > > > > > > > due to "Message: No valid host was found. There are not enough > > > > > > > hosts> > > > > > > > available., Code: 500"> Heat Stack create failed.> > Here are > > > > > > > some > > > > > > > logs:> > > > > > > > > Every 2.0s: heat resource-list -n 5 overcloud | grep -v > > > > > > > > COMPLETE > > > > > > > > Tue > > > > > > > > Oct > > > > > > > 13> 16:18:17 2015> > > > > > > > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+> > > > > > > > | resource_name | physical_resource_id | resource_type | > > > > > > > | resource_status > > > > > > > |> | updated_time | stack_name |> > > > > > > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+> > > > > > > > | Compute | e33b6b1e-8740-4ded-ad7f-720617a03393 | > > > > > > > | OS::Heat::ResourceGroup > > > > > > > |> | CREATE_FAILED | 2015-10-13T10:20:36 | overcloud |> | > > > > > > > |> | Controller > > > > > > > |> | | > > > > > > > 116c57ff-debb-4c12-92e1-e4163b67dc17 | OS::Heat::ResourceGroup> | > > > > > > > | > > > > > > > CREATE_FAILED | 2015-10-13T10:20:36 | overcloud |> | 0 | > > > > > > > 342a9023-de8f-4b5b-b3ec-498d99b56dc4 | OS::TripleO::Controller |> > > > > > > > | > > > > > > > CREATE_IN_PROGRESS | 2015-10-13T10:20:52 |> | > > > > > > > overcloud-Controller-45bbw24xxhxs |> | 0 | > > > > > > > e420a7bd-86f8-4cc1-b6a0-5ba8d1412453 | OS::TripleO::Compute |> | > > > > > > > CREATE_FAILED | 2015-10-13T10:20:54 | > > > > > > > overcloud-Compute-vqk632ysg64r > > > > > > > |> > > > > > > > | > > > > > > > Controller | 2e9ac712-0566-49b5-958f-c3e151bb24d7 | > > > > > > > OS::Nova::Server > > > > > > > |> > > > > > > > | > > > > > > > CREATE_IN_PROGRESS | 2015-10-13T10:20:54 |> | > > > > > > > overcloud-Controller-45bbw24xxhxs-0-3vyhjiak2rsk |> | NovaCompute > > > > > > > | > > > > > > > 96efee56-81cb-46af-beef-84f4a3af761a | OS::Nova::Server |> | > > > > > > > CREATE_FAILED > > > > > > > | 2015-10-13T10:20:56 |> | > > > > > > > | overcloud-Compute-vqk632ysg64r-0-32nalzkofmef > > > > > > > |> > > > > > > > +-------------------------------------------+-----------------------------------------------+---------------------------------------------------+--------------------+---------------------+---------------------------------------------------------------------------------+> > > > > > > > > > [stack at undercloud ~]$ heat resource-show overcloud Compute> > > > > > > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+> > > > > > > > | Property | Value |> > > > > > > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+> > > > > > > > | attributes | { |> | | "attributes": null, |> | | "refs": null > > > > > > > | |> > > > > > > > | | > > > > > > > | | > > > > > > > | } > > > > > > > |> | creation_time | 2015-10-13T10:20:36 |> | description | |> | > > > > > > > |> | links > > > > > > > |> | |> > > > > > > > | > > > > > > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud/620ada83-fb7d-4769-b1e8-431cfbb37d70/resources/Compute> > > > > > > > | (self) |> | | > > > > > > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud/620ada83-fb7d-4769-b1e8-431cfbb37d70> > > > > > > > | | (stack) |> | | > > > > > > > http://192.0.2.1:8004/v1/3c5942d315bc445c8f1f7b32bd445de5/stacks/overcloud-Compute-vqk632ysg64r/e33b6b1e-8740-4ded-ad7f-720617a03393> > > > > > > > | | (nested) |> | logical_resource_id | Compute |> | > > > > > > > | | physical_resource_id > > > > > > > | e33b6b1e-8740-4ded-ad7f-720617a03393 |> | required_by | > > > > > > > ComputeAllNodesDeployment |> | | ComputeNodesPostDeployment |> | > > > > > > > | > > > > > > > ComputeCephDeployment |> | | ComputeAllNodesValidationDeployment > > > > > > > |> > > > > > > > | > > > > > > > | > > > > > > > AllNodesExtraConfig |> | | allNodesConfig |> | resource_name | > > > > > > > Compute > > > > > > > |> > > > > > > > | resource_status | CREATE_FAILED |> | resource_status_reason | > > > > > > > resources.Compute: ResourceInError:> | > > > > > > > resources[0].resources.NovaCompute: > > > > > > > Went to status ERROR due to "Message:> | No valid host was found. > > > > > > > There > > > > > > > are not enough hosts available., Code: 500"> | |> | resource_type > > > > > > > | > > > > > > > OS::Heat::ResourceGroup |> | updated_time | 2015-10-13T10:20:36 > > > > > > > |> > > > > > > > +------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+> > > > > > > > > > > This is my instackenv.json for 1 compute and 1 control node > > > > > > > > > > to > > > > > > > > > > be > > > > > > > deployed.> > {> "nodes": [> {> "pm_type":"pxe_ipmitool",> > > > > > > > "mac":[> > > > > > > > "08:9E:01:58:CC:A1"> ],> "cpu":"4",> "memory":"8192",> > > > > > > > "disk":"10",> > > > > > > > "arch":"x86_64",> "pm_user":"root",> "pm_password":"calvin",> > > > > > > > "pm_addr":"192.168.0.18"> },> {> "pm_type":"pxe_ipmitool",> > > > > > > > "mac":[> > > > > > > > "08:9E:01:58:D0:3D"> ],> "cpu":"4",> "memory":"8192",> > > > > > > > "disk":"100",> > > > > > > > "arch":"x86_64",> "pm_user":"root",> "pm_password":"calvin",> > > > > > > > "pm_addr":"192.168.0.19"> }> ]> }> > > Any ideas? Thanks in > > > > > > > advance> > > > > > > > > > > > > > > > > > > > > > > > Esra ÇELİK> TÜBİTAK BİLGEM> > > > > > > > www.bilgem.tubitak.gov.tr> > > > > > > > celik.esra at tubitak.gov.tr> > > > > > > > > _______________________________________________> Rdo-list mailing > > > > > > > list> > > > > > > > Rdo-list at redhat.com> > > > > > > > https://www.redhat.com/mailman/listinfo/rdo-list> > > > > > > > > > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com> > > > > > > > > > > _______________________________________________> Rdo-list mailing > > > > > > > list> > > > > > > > Rdo-list at redhat.com> > > > > > > > https://www.redhat.com/mailman/listinfo/rdo-list> > > > > > > > > > > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Rdo-list mailing list > > > Rdo-list at redhat.com > > > https://www.redhat.com/mailman/listinfo/rdo-list > > > > > > To unsubscribe: rdo-list-unsubscribe at redhat.com >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rdoproject.org/pipermail/dev/attachments/20151016/b78e8b2b/attachment.html>


More information about the dev mailing list