[Rdo-list] [rdo-manager] Authentication required during overcloud deployment
Omri Hochman
ohochman at redhat.com
Thu Oct 15 23:37:20 UTC 2015
Note that we also had a bug when changed the default values of undercloud.conf
It should've been fixed already, but make sure you're using the newer RPMs that are including this fix :
https://bugzilla.redhat.com/show_bug.cgi?id=1270033
Regards,
Omri.
----- Original Message -----
> From: "Erming Pei" <erming at ualberta.ca>
> To: "Sasha Chuzhoy" <sasha at redhat.com>
> Cc: rdo-list at redhat.com
> Sent: Thursday, October 15, 2015 6:56:17 PM
> Subject: Re: [Rdo-list] [rdo-manager] Authentication required during overcloud deployment
>
> Hi Sasha,
>
> I checked the sys logs and see many such errors:
>
> Oct 15 22:50:19 localhost os-collect-config: 2015-10-15 22:50:19.133 8516
> WARNING os_collect_config.ec2 [-] ('Connection aborted.', error(113, 'No
> route to host'))
> Oct 15 22:50:19 localhost os-collect-config: 2015-10-15 22:50:19.133 8516
> WARNING os-collect-config [-] Source [ec2] Unavailable.
> Oct 15 22:50:20 localhost os-collect-config: 2015-10-15 22:50:20.007 8516
> WARNING os_collect_config.heat [-] No auth_url configured.
> Oct 15 22:50:20 localhost os-collect-config: 2015-10-15 22:50:20.007 8516
> WARNING os_collect_config.request [-] No metadata_url configured.
> Oct 15 22:50:20 localhost os-collect-config: 2015-10-15 22:50:20.007 8516
> WARNING os-collect-config [-] Source [request] Unavailable.
> Oct 15 22:50:20 localhost os-collect-config: 2015-10-15 22:50:20.007 8516
> WARNING os_collect_config.local [-] /var/lib/os-collect-config/local-data
> not found. Skipping
> Oct 15 22:50:20 localhost os-collect-config: 2015-10-15 22:50:20.007 8516
> WARNING os_collect_config.local [-] No local metadata found
> (['/var/lib/os-collect-config/local-data'])
>
> Below are my undercloud.conf (masked passwords).
>
>
> [stack at gcloudcon-3 ~]$ cat undercloud.conf
> [DEFAULT]
>
> #
> # From instack-undercloud
> #
>
> # Local file path to the necessary images. The path should be a
> # directory readable by the current user that contains the full set of
> # images. (string value)
> #image_path = .
> image_path = /gcloud/images
>
> # IP information for the interface on the Undercloud that will be
> # handling the PXE boots and DHCP for Overcloud instances. The IP
> # portion of the value will be assigned to the network interface
> # defined by local_interface, with the netmask defined by the prefix
> # portion of the value. (string value)
> #local_ip = 192.0.2.1/24
> local_ip = 10.0.6.40/16
>
> # Network interface on the Undercloud that will be handling the PXE
> # boots and DHCP for Overcloud instances. (string value)
> #local_interface = eth1
> local_interface = eth0
>
> # Network that will be masqueraded for external access, if required.
> # This should be the subnet used for PXE booting. (string value)
> #masquerade_network = 192.0.2.0/24
> masquerade_network = 10.0.6.0/16
>
> # Start of DHCP allocation range for PXE and DHCP of Overcloud
> # instances. (string value)
> #dhcp_start = 192.0.2.5
> dhcp_start = 10.0.6.50
>
> # End of DHCP allocation range for PXE and DHCP of Overcloud
> # instances. (string value)
> #dhcp_end = 192.0.2.24
> dhcp_end = 10.0.6.250
>
> # Network CIDR for the Neutron-managed network for Overcloud
> # instances. This should be the subnet used for PXE booting. (string
> # value)
> #network_cidr = 192.0.2.0/24
> network_cidr = 10.0.6.0/16
>
> # Network gateway for the Neutron-managed network for Overcloud
> # instances. This should match the local_ip above when using
> # masquerading. (string value)
> #network_gateway = 192.0.2.1
> network_gateway = 10.0.6.40
>
> # Network interface on which discovery dnsmasq will listen. If in
> # doubt, use the default value. (string value)
> #discovery_interface = br-ctlplane
>
> # Temporary IP range that will be given to nodes during the discovery
> # process. Should not overlap with the range defined by dhcp_start
> # and dhcp_end, but should be in the same network. (string value)
> #discovery_iprange = 192.0.2.100,192.0.2.120
> discovery_iprange = 10.0.6.251,10.0.6.252
>
> # Whether to run benchmarks when discovering nodes. (boolean value)
> #discovery_runbench = false
>
> # Whether to enable the debug log level for Undercloud OpenStack
> # services. (boolean value)
> undercloud_debug = true
>
>
> [auth]
>
> #
> # From instack-undercloud
> #
>
> # Password used for MySQL databases. If left unset, one will be
> # automatically generated. (string value)
> undercloud_db_password = xxxxxxxxxxxxxx
>
> # Keystone admin token. If left unset, one will be automatically
> # generated. (string value)
> #undercloud_admin_token = <None>
>
> # Keystone admin password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_admin_password = xxxxxxxxxxxxxx
>
> # Glance service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_glance_password = xxxxxxxxxxxxxx
>
> # Heat db encryption key(must be 8,16 or 32 characters. If left unset,
> # one will be automatically generated. (string value)
> #undercloud_heat_encryption_key = <None>
>
> # Heat service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_heat_password = xxxxxxxxxxxxxx
>
> # Neutron service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_neutron_password = xxxxxxxxxxxxxx
>
> # Nova service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_nova_password = xxxxxxxxxxxxxx
>
> # Ironic service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_ironic_password = xxxxxxxxxxxxxx
>
> # Tuskar service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_tuskar_password = xxxxxxxxxxxxxx
>
> # Ceilometer service password. If left unset, one will be
> # automatically generated. (string value)
> undercloud_ceilometer_password = xxxxxxxxxxxxxx
>
> # Ceilometer metering secret. If left unset, one will be automatically
> # generated. (string value)
> #undercloud_ceilometer_metering_secret = <None>
>
> # Ceilometer snmpd user. If left unset, one will be automatically
> # generated. (string value)
> undercloud_ceilometer_snmpd_user = ceilometer
>
> # Ceilometer snmpd password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_ceilometer_snmpd_password = xxxxxxxxxxxxxx
>
> # Swift service password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_swift_password = xxxxxxxxxxxxxx
>
> # Rabbitmq cookie. If left unset, one will be automatically generated.
> # (string value)
> #undercloud_rabbit_cookie = <None>
>
> # Rabbitmq password. If left unset, one will be automatically
> # generated. (string value)
> undercloud_rabbit_password = xxxxxxxxxxxxxx
>
> # Rabbitmq username. If left unset, one will be automatically
> # generated. (string value)
> undercloud_rabbit_username = rabbit
>
> # Heat stack domain admin password. If left unset, one will be
> # automatically generated. (string value)
> undercloud_heat_stack_domain_admin_password = xxxxxxxxxxxxxx
>
> # Swift hash suffix. If left unset, one will be automatically
> # generated. (string value)
> #undercloud_swift_hash_suffix = <None>
>
>
>
> Yes, I am just testing with the basic 1 controller and 1 compute case.
> I can try with setting a timeout as you did.
>
> Thanks,
>
> Erming
>
>
> On 10/15/15, 3:19 PM, Sasha Chuzhoy wrote:
>
>
>
> Hi Erming,
> You can also check the log files on nodes for errors (start with
> /var/log/messages).
>
> if things are working, "openstack overcloud deploy --template" will create a
> nonHA deployment without network isolation consisting of 1 controller and 1
> compute.
> I usually add "--timeout 90", as this period of time is sufficient on my
> setup for deploying the overcloud.
>
> Seeing the IP being different than 192.0.2.x, I wonder what other changes
> were made to the undercloud.conf?
>
> Best regards,
> Sasha Chuzhoy.
>
> ----- Original Message -----
>
>
>
> From: "Erming Pei" <erming at ualberta.ca> To: "Dan Sneddon"
> <dsneddon at redhat.com> , rdo-list at redhat.com Sent: Thursday, October 15, 2015
> 4:03:26 PM
> Subject: Re: [Rdo-list] [rdo-manager] Authentication required during
> overcloud deployment
>
> Hi Dan, Sasha,
>
> Thanks for your answers and hints.
> I looked up the heat/etc log files and stack/node status.
> Only thing I found by far is "timed out". I don't know what's the reason.
> IPMI looks good.
>
> Tried with HEAT_INCLUDE_PASSWORD=1 but same error message (Please try again
> with option --include-password or export HEAT_INCLUDE_PASSWORD=1
> Authentication required)
>
> BTW. I only followed the exact instruction as shown in the guide: (openstack
> overcloud deploy --templates) No more options. I thought this is good for a
> demo deployment. If not sufficient, which one I should follow? See some of
> your discussions, but not very clear. Should I follow the example from
> jliberma at redhat.com ?
>
> Below are my investigation:
> By runnig: $ heat resource-list overcloud
> Found that just controller and compute are failed: CREATE_FAILED
>
> Checked the reason it says: resource_status_reason | CREATE aborted
>
> I then logged into the running overcloud nodes (e.g. the controller):
>
>
> [heat-admin at overcloud-controller-0 ~]$ ifconfig
> br-ex: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet6 fe80::21:5eff:fecd:9df3 prefixlen 64 scopeid 0x20<link>
> ether 02:21:5e:cd:9d:f3 txqueuelen 0 (Ethernet)
> RX packets 29926 bytes 2364154 (2.2 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 81 bytes 25614 (25.0 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> enp0s29f0u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet6 fe80::21:5eff:fecd:9df3 prefixlen 64 scopeid 0x20<link>
> ether 02:21:5e:cd:9d:f3 txqueuelen 1000 (Ethernet)
> RX packets 29956 bytes 1947140 (1.8 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 102 bytes 28620 (27.9 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> enp11s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.6.64 netmask 255.255.0.0 broadcast 10.0.255.255
> inet6 fe80::221:5eff:fec9:abd8 prefixlen 64 scopeid 0x20<link>
> ether 00:21:5e:c9:ab:d8 txqueuelen 1000 (Ethernet)
> RX packets 66256 bytes 21109918 (20.1 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 35938 bytes 4641202 (4.4 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> enp11s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet6 fe80::221:5eff:fec9:abda prefixlen 64 scopeid 0x20<link>
> ether 00:21:5e:c9:ab:da txqueuelen 1000 (Ethernet)
> RX packets 25429 bytes 2004574 (1.9 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 6 bytes 532 (532.0 B)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> ib0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 2044
> inet6 fe80::202:c902:23:baf9 prefixlen 64 scopeid 0x20<link>
> Infiniband hardware address can be incorrect! Please read BUGS section in
> ifconfig(8).
> infiniband 80:00:04:04:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
> txqueuelen 256 (InfiniBand)
> RX packets 183678 bytes 10292768 (9.8 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 17 bytes 5380 (5.2 KiB)
> TX errors 0 dropped 7 overruns 0 carrier 0 collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 0 (Local Loopback)
> RX packets 138 bytes 11792 (11.5 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 138 bytes 11792 (11.5 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> [heat-admin at overcloud-controller-0 ~]$ ovs-vsctl show
> ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed
> (Permission denied)
> [heat-admin at overcloud-controller-0 ~]$ sudo ovs-vsctl show
> 76e6f8a7-88cf-4920-b133-b4d15a4b9092
> Bridge br-ex
> Port br-ex
> Interface br-ex
> type: internal
> Port "enp0s29f0u2"
> Interface "enp0s29f0u2"
> ovs_version: "2.3.1"
> [heat-admin at overcloud-controller-0 ~]$
> [heat-admin at overcloud-controller-0 ~]$ ping 10.0.6.65
> PING 10.0.6.65 (10.0.6.65) 56(84) bytes of data.
> 64 bytes from 10.0.6.65: icmp_seq=1 ttl=64 time=0.176 ms
> 64 bytes from 10.0.6.65: icmp_seq=2 ttl=64 time=0.195 ms
> ^C
> --- 10.0.6.65 ping statistics ---
> 2 packets transmitted, 2 received, 0% packet loss, time 999ms
> rtt min/avg/max/mdev = 0.176/0.185/0.195/0.016 ms
> [heat-admin at overcloud-controller-0 ~]$
> [heat-admin at overcloud-controller-0 ~]$ ping 10.0.6.64
> PING 10.0.6.64 (10.0.6.64) 56(84) bytes of data.
> 64 bytes from 10.0.6.64: icmp_seq=1 ttl=64 time=0.015 ms
> ^C
> --- 10.0.6.64 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.015/0.015/0.015/0.000 ms
>
> [heat-admin at overcloud-controller-0 ~]$ cat /etc/os-net-config/config.json
> {"network_config": [{"use_dhcp": true, "type": "ovs_bridge", "name": "br-ex",
> "members": [{"type": "interface", "name": "nic1", "primary": true}]}]}
> [heat-admin at overcloud-controller-0 ~]$
> [heat-admin at overcloud-controller-0 ~]$
> [heat-admin at overcloud-controller-0 ~]$ sudo os-net-config --debug -c
> /etc/os-net-config/config.json
> [2015/10/15 07:52:08 PM] [INFO] Using config file at:
> /etc/os-net-config/config.json
> [2015/10/15 07:52:08 PM] [INFO] Using mapping file at:
> /etc/os-net-config/mapping.yaml
> [2015/10/15 07:52:08 PM] [INFO] Ifcfg net config provider created.
> [2015/10/15 07:52:08 PM] [DEBUG] network_config JSON: [{'use_dhcp': True,
> 'type': 'ovs_bridge', 'name': 'br-ex', 'members': [{'type': 'interface',
> 'name': 'nic1', 'primary': True}]}]
> [2015/10/15 07:52:08 PM] [INFO] nic1 mapped to: enp0s29f0u2
> [2015/10/15 07:52:08 PM] [INFO] nic2 mapped to: enp11s0f0
> [2015/10/15 07:52:08 PM] [INFO] nic3 mapped to: enp11s0f1
> [2015/10/15 07:52:08 PM] [INFO] nic4 mapped to: ib0
> [2015/10/15 07:52:08 PM] [INFO] adding bridge: br-ex
> [2015/10/15 07:52:08 PM] [DEBUG] bridge data: DEVICE=br-ex
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSBridge
> OVSBOOTPROTO=dhcp
> OVSDHCPINTERFACES="enp0s29f0u2"
> OVS_EXTRA="set bridge br-ex other-config:hwaddr=02:21:5e:cd:9d:f3"
>
> [2015/10/15 07:52:08 PM] [INFO] adding interface: enp0s29f0u2
> [2015/10/15 07:52:08 PM] [DEBUG] interface data: DEVICE=enp0s29f0u2
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSPort
> OVS_BRIDGE=br-ex
> BOOTPROTO=none
>
> [2015/10/15 07:52:08 PM] [INFO] applying network configs...
> [2015/10/15 07:52:08 PM] [DEBUG] Diff file data:
> DEVICE=enp0s29f0u2
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSPort
> OVS_BRIDGE=br-ex
> BOOTPROTO=none
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff data:
> DEVICE=enp0s29f0u2
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSPort
> OVS_BRIDGE=br-ex
> BOOTPROTO=none
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff file data:
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff data:
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff file data:
> DEVICE=br-ex
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSBridge
> OVSBOOTPROTO=dhcp
> OVSDHCPINTERFACES="enp0s29f0u2"
> OVS_EXTRA="set bridge br-ex other-config:hwaddr=02:21:5e:cd:9d:f3"
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff data:
> DEVICE=br-ex
> ONBOOT=yes
> HOTPLUG=no
> DEVICETYPE=ovs
> TYPE=OVSBridge
> OVSBOOTPROTO=dhcp
> OVSDHCPINTERFACES="enp0s29f0u2"
> OVS_EXTRA="set bridge br-ex other-config:hwaddr=02:21:5e:cd:9d:f3"
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff file data:
>
> [2015/10/15 07:52:08 PM] [DEBUG] Diff data:
>
>
>
> [heat-admin at overcloud-controller-0 ~]$ openstack-status
> == Nova services ==
> openstack-nova-api: inactive (disabled on boot)
> openstack-nova-cert: inactive (disabled on boot)
> openstack-nova-compute: inactive (disabled on boot)
> openstack-nova-network: inactive (disabled on boot)
> openstack-nova-scheduler: inactive (disabled on boot)
> openstack-nova-conductor: inactive (disabled on boot)
> == Glance services ==
> openstack-glance-api: inactive (disabled on boot)
> openstack-glance-registry: inactive (disabled on boot)
> == Keystone service ==
> openstack-keystone: inactive (disabled on boot)
> == Horizon service ==
> openstack-dashboard: uncontactable
> == neutron services ==
> neutron-server: inactive (disabled on boot)
> neutron-dhcp-agent: inactive (disabled on boot)
> neutron-l3-agent: inactive (disabled on boot)
> neutron-metadata-agent: inactive (disabled on boot)
> neutron-lbaas-agent: inactive (disabled on boot)
> neutron-openvswitch-agent: inactive (disabled on boot)
> neutron-metering-agent: inactive (disabled on boot)
> == Swift services ==
> openstack-swift-proxy: inactive (disabled on boot)
> openstack-swift-account: inactive (disabled on boot)
> openstack-swift-container: inactive (disabled on boot)
> openstack-swift-object: inactive (disabled on boot)
> == Cinder services ==
> openstack-cinder-api: inactive (disabled on boot)
> openstack-cinder-scheduler: inactive (disabled on boot)
> openstack-cinder-volume: inactive (disabled on boot)
> openstack-cinder-backup: inactive (disabled on boot)
> == Ceilometer services ==
> openstack-ceilometer-api: inactive (disabled on boot)
> openstack-ceilometer-central: inactive (disabled on boot)
> openstack-ceilometer-compute: inactive (disabled on boot)
> openstack-ceilometer-collector: inactive (disabled on boot)
> openstack-ceilometer-alarm-notifier: inactive (disabled on boot)
> openstack-ceilometer-alarm-evaluator: inactive (disabled on boot)
> openstack-ceilometer-notification: inactive (disabled on boot)
> == Heat services ==
> openstack-heat-api: inactive (disabled on boot)
> openstack-heat-api-cfn: inactive (disabled on boot)
> openstack-heat-api-cloudwatch: inactive (disabled on boot)
> openstack-heat-engine: inactive (disabled on boot)
> == Support services ==
> libvirtd: active
> openvswitch: active
> dbus: active
> rabbitmq-server: inactive (disabled on boot)
> memcached: inactive (disabled on boot)
> == Keystone users ==
> Warning keystonerc not sourced
>
>
>
>
> Thanks,
>
> Erming
>
>
> On 10/14/15, 5:23 PM, Dan Sneddon wrote:
>
>
>
> On 10/14/2015 03:03 PM, Erming Pei wrote:
>
>
>
> Hi,
>
> I am deploying the overcloud in baremetal way and after a couple of
> hours, it showed:
>
> $ openstack overcloud deploy --templates
> Deploying templates in the directory
> /usr/share/openstack-tripleo-heat-templates
> ^[[A^[[BERROR: openstack ERROR: Authentication failed. Please try again
> with option --include-password or export HEAT_INCLUDE_PASSWORD=1
> Authentication required
>
>
> But I checked the nodes are now running:
>
> [stack at gcloudcon-3 ~]$ nova list
> +--------------------------------------+-------------------------+--------+------------+-------------+--------------------+
>
> | ID | Name |
> Status | Task State | Power State | Networks |
> +--------------------------------------+-------------------------+--------+------------+-------------+--------------------+
>
> | 1ba04ac0-fe2b-4318-aa31-2e5f4d8422a6 | overcloud-controller-0 |
> ACTIVE | - | Running | ctlplane=10.0.6.60 |
> | c152ba59-3aed-4fb0-81fa-e3fed7e35cf6 | overcloud-novacompute-0 |
> ACTIVE | - | Running | ctlplane=10.0.6.61 |
> +--------------------------------------+-------------------------+--------+------------+-------------+--------------------+
>
>
> 1. Should I re-deploy the nodes or there is a way to do update/makeup
> for the authentication issue?
>
> 2.
> I don't know how to access to the nodes.
> There is not an overcloudrc file produced.
>
> $ ls overcloud*
> overcloud-env.json overcloud-full.initrd overcloud-full.qcow2
> overcloud-full.vmlinuz
>
> overcloud-full.d:
> dib-manifests
>
> Is it via ssh key or password? Should I set the authentication method
> somewhere?
>
>
>
> Thanks,
>
> Erming
>
>
> _______________________________________________
> Rdo-list mailing list Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list To unsubscribe:
> rdo-list-unsubscribe at redhat.com This error generally means that something in
> the deployment got stuck,
> and the deployment hung until the token expired after 4 hours. When
> that happens, there is no overcloudrc generated (because there is not a
> working overcloud). You won't be able to recover with a stack update,
> you'll need to perform a stack-delete and redeploy once you know what
> went wrong.
>
> Generally a deployment shouldn't take anywhere near that long, a bare
> metal deployment with 6 hosts takes me less than an hour, and less than
> 2 including a Ceph deployment. In fact, I usually set a timeout using
> the --timeout option, because if it hasn't finished after, say 90
> minutes (depending on how complicated the deployment is), then I want
> it to bomb out so I can diagnose what went wrong and redeploy.
>
> Often when a deployment times out it is because there were connectivity
> issues between the nodes. Since you can log in to the hosts, you might
> want to do some basic network troubleshooting, such as:
>
> $ ip address # check to see that all the interfaces are there, and
> that the IP addresses have been assigned
>
> $ sudo ovs-vsctl show # make sure that the bridges have the proper
> interfaces, vlans, and that all the expected bridges show up
>
> $ ping <other overcloud nodes> # you can try this on all VLANs to make
> sure that any VLAN trunks are working properly
>
> $ sudo ovs-appctl bond/show # if running bonding, check to see the
> bond status
>
> $ sudo os-net-config --debug -c /etc/os-net-config/config.json # run
> the network configuration script again to make sure that it is able to
> configure the interfaces without error. WARNING, MAY BE DISRUPTIVE as
> this will reset the network interfaces, run on console if possible.
>
> However, I want to first double-check that you had a valid command
> line. You only show "openstack deploy overcloud --templates" in your
> original email. You did have a full command-line, right? Refer to the
> official installation guide for the right parameters.
>
>
> --
> ---------------------------------------------
> Erming Pei, Ph.D
> Senior System Analyst; Grid/Cloud Specialist
>
> Research Computing Group
> Information Services & Technology
> University of Alberta, Canada
>
> Tel: +1 7804929914 Fax: +1 7804921729
> ---------------------------------------------
>
> _______________________________________________
> Rdo-list mailing list Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list To unsubscribe:
> rdo-list-unsubscribe at redhat.com
>
>
> --
> ---------------------------------------------
> Erming Pei, Ph.D
> Senior System Analyst; Grid/Cloud Specialist
>
> Research Computing Group
> Information Services & Technology
> University of Alberta, Canada
>
> Tel: +1 7804929914 Fax: +1 7804921729
> ---------------------------------------------
>
> _______________________________________________
> Rdo-list mailing list
> Rdo-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rdo-list
>
> To unsubscribe: rdo-list-unsubscribe at redhat.com
More information about the dev
mailing list